Ive noticed that with a lot of hosts, usually the bigger ones, if there is no index file, that it shows a default page type thing in the main directory only. Something like "This is your default page. To get rid of this page, Upload an index file", etc.
Usually has the host's logo, etc. How do people go about doing this? I've not been able to figure it out as of yet...
Our servers Shared IP seems to be loading the first domain name in the httpd.conf file as the servers default page.
I want to change the default page to either our main domain or to the apaches "success!" default webpage.
We're using cpanel. I'm unsure why it's loading the first domain when you load the IP.
It used to load properly but for some odd reason stopped working. I suspect a cpanel update was the culprit.
Is there any function in cpanel that allows you to set your own default page instead of the typical index,default.htm/html?
View 14 Replies View RelatedHow do I change the default green cpanel page when a new account is created (dns only) and no page is uploaded yet?
View 4 Replies View RelatedI don't know why but a domain is showing the green default cpanel page instead of its own homepage. The domain has been hosted on this box for a long time.
DNS is fine, ran udpateuserdomains without error. No dns changes have been made. IP it is set to pings fine. Tested via 3rd party proxy, shows green cpanel page still.
Shows proper IP in httpd.conf
I have suddenly lost all of the websites on the plesk panel server 12.0.18. One of the domains was being used to spam and so I started blocking stuff and removing some of the offending files and folders and the spamming stopped.
However it got to a point where I needed to restart the server and although it was working before the restart, once I did restart it it stopped working. All domains are loading nothing and the access_log looks like nginx or FastCGI is trying to redirect the page somewhere. The bootstrapper repair log file states:
"Details: PHP Warning: include_once(Template/Writer/Webserver/Apache.php): failed to open stream: No such file or directory; File: /usr/local/psa/admin/plib/Loader.php, Line: 97"
I have test server with > VMware CentOS + Plesk 12...And after reboot, plesk "localhost.localdomain" show me "Apache 2 default page"I do this > service httpd restart, and after all ok. (Show Plesk Default page) no apache page.I want normaly reboot server and show "Plesk default page" no apache...
View 4 Replies View RelatedMy one website & all it's sub-domains automatically showing Plesk Default Page . After checking further, I found websites were stopped on the server . I manually started them but after few hours again same status . I repeated the same thing several times but issue not fixed.
View 9 Replies View RelatedI have domains parked on a subdomain. Since i updated the apache configuration with cPanel the parked domains just show the default apache configuration. The domain shows up under parked domains. I can delete the domain and readd then it works. However, that isn't a good option cause there are 100+ domains.
View 6 Replies View RelatedWhen a domain name is pointing to our server and the account is not setup yet, there's a default page that says:"
Quote:
Great Success!
Apache is working on your cPanel® and WHM™ Server
If you can see this page, then the people who manage this server have installed cPanel and WebHost Manager (WHM) which use the Apache Web server software and the Apache Interface to OpenSSL (mod_ssl) successfully. They now have to add content to this directory and replace this placeholder page, or else point the server at their real content.
How can I modify that page ONLY for ROOT accounts and not my resellers?
I am currently unable to access the Plesk control panel except from the web server itself. When I try any of the following options, all work on the server itself but externally all I get is the default Tomcat page.
https://server_name:8443
https://anydomain.com:8443
https://local_ip_address:8443
https://external_ip_address:8443
I don't know if the problem is on the server itself or something within our firewall - we use Microsoft Forefront TMG. The port 8443 is open, and the Tomcat page is being served. All websites working fine, both internally and externally. The server itself is in a DMZ on the network.
The server is running Centos 7 with Plesk 12.
I just noticed that when adding a new domain, I am warned that the domain resolves to another IP address - the external one. Currently, the IP address set up in Plesk is the internal (192.168...) address. Could it be that I need to change this to the external?
I upgraded from 10.4.4 to 11.0.9 and saw no errors in the process, everything was fine. However when I checked the sites after, all of them (including sub-domains) were showing the default domain page. All the files are still there no problem, and as a test I deleted a subdomain a recreated it and it worked fine.
I have a feeling it's something to do with IP addresses (I currently have two set up - most sites use one and about only 5 use the other) as going to the subscription and changing the IP address over to the other one then back to the original seems to make the site show up for most sites. I can't do this on all sites though - any commands to reconfigure everything and get it all back in to place?
I am creating new sites in my panel and they are only loading the default page.
The IP is pointed correctly or I would not get the default plesk page.
All the other service seem to work ok. I can ftp in and I can edit files with the online file manager.
If I use the preview feature I can see the changes I make to the files, but that is the only way.
I looked in /var/www/vhosts/system/ and the conf files are present.
What else can I check to see why the sites are not working?
I disabled a site, and instead of getting the default placeholder when visiting the domain, I get another web site that I host.
[URL]
I have added name servers and they should be propagated fully as I created them 3 days ago.
The issue is that the domain using these name servers loads fine and then after awhile it goes back to the Plesk default page.. Then after awhile it shows again, etc. I have run reconfiguration command, have restart bind and Plesk. Not sure what else I can do.
This is sort of a test domain I wanted to get working before switching my main sites to these name servers.
domain is webdevoman.com
nameservers are ns1.talkdevelopment.org and ns2.talkdevelopment.org
I am migrating my old environment from Plesk 10.4.4 on Ubuntu 10.04 to Plesk 12.0.18 on Ubuntu 14.04. I was able to migrate the sites from the old server over to the new server with little issue. The new server configuration with Apache and Nginx wasn't working for me, so I disabled Nginx and reconfigured all domains. I moved each site over one at a time and tested them, resolving issues when they arose, and moved on to the next domain. One thing I did not notice at the time, was the server would intermittently display the default parallels index.html page on the sites.
I would test one site, see it is working, and move to the next, etc. I would then retest the sites and they would display the index.html page. I have tried reconfiguring each domain, restarting Apache to no avail. One site I have is a static site, whereas all of the others are Drupal sites. The static site would display once Apache was restarted, but will go back to the default page after a while. The same thing occurs with the Drupal sites as well. It is just like the sites are shutting down for some reason.
I have checked the log files, and have not come across anything out of the ordinary. I have followed several threads which discussed DNS. The issue occurs when DNS is turned on, and when it is turned off. I do not use DNS on the server since the DNS records are being managed elsewhere. I have even added the correct name servers under each subscription in our system. I have used the Web Server Configuration checker and receive one warning. I followed the steps in [URL] .... I queried the psa database retrieving an Empty set (0.00 sec). Nothing seems to work. One minute the site is there, the next is the default page. As of right now, I am unable to put this server into production since it is not behaving as it should.
i have a domain registered within PLESK having the same name as the server itself. After a short period of time the domain shows up the PLESK default page instead of the original content located in the vhost httpdocs directory.
To restore the content it's possible to deactivate and re-activate the domain from the customers control panel. But after an amount of time the default page comes back.I first recognized the error after the update to PLESK 12.
i've migrate from plesk 11.5 (centos server) to plesk 12 (ubuntu 14). The migrate process doesn't give problems but now (and for all domains), web service doesn't work well in fact works but all domains resolve /var/www/vhosts/default/htpdocs/index.html and not /var/www/vhosts/domain/httpdocs/
The rest of services (mail, ftp...) seems to work ok. I don't know if it's important but as before migrate, we use and external DNS server so in plesk i have DNS server down.
if you go to www.home.ecarindo.com, you can see that it displays the text file, the Default.aspx, the ACTUAL text file,
I've added the line DirectoryIndex Default.aspx to the .htcaccess in my home directory in cPanel, btw.
Update: nevermind, my idiotic team member registered a Linux plan instead of a Windows plan, sorry for the disturbance.
Have a website that is making use of both index.html and index.php files as the main page. How can I achieve either through .htaccess or similar (shared hosting) to have the users directed to index.html and not load the index.php first off.
View 1 Replies View RelatedI am having an issue where I have a server that Directadmin is installed on. I go to the a url that is on the server and all i see is the default page of apache saying congrats, it is installed. Although there is no file like that in the public_html any longer and I can see my files in the public_html folder of that specific site.
View 6 Replies View RelatedI want to permanent redirect some .html page from subdomain to main domain WordPress page,Redirect permanent /cat/FSBO76.URL....
View 1 Replies View RelatedI have a problem with my server. I am trying to make a subdomain, and it isn't working. I create it like how in all tutorials says here( click here ) . I completed all fields, but when i try to open the subdomain in a browser page, it's telling me, page not found / page doesn't exist. I have a dedicated server on window server 2008 for my website with a dedicated IP.
View 5 Replies View RelatedRight now my stats system only shows from what website traffic is coming. I have google analytics aswell, and with all its functions, it does not tell me from exactly what webpage traffic is coming, and to what webpage the traffic is coming to.
So, let say someone is sending me traffic from www.reffererxxx.com/cool_video.html to www.mysite.com/super_cool_video.html
My statistics would only show that www.reffererxxx.com is sending traffic to www.mysite.com
Is there a way(a script/service/program) to find out exactly from what webpage the traffic is coming, and to what webpage of mine the traffic is going to?
(I do not have server logs / webalizer / awstats as my server cannot handle the log processing due to high server loads)