I have a dedicated server and a domain I bought from godaddy. The dedicated server currently runs from an IP. So if I were to visit 79.xxx.xxx.xxx/whm, I would be able to access WHM. However, how do I change the IP to go to a domain? So when I go to the domain xxxxx.com/whm I go to the server's whm, and so that I can use the domain to host my site.
View 13 RepliesWe are currently having a server with serverloft and as we are in the trial phase have just a few trial websites hosted on it. Now since today we have a curious issue on one of our website
It is not being accessible via a particular network of computers even though till yesterday this network of computers was able to connect to the website.
The website is working fine from all other computers and networks that we are trying to access it from. Now my question is how is this possible. The DNS is configured correctly as the website is being accessed by other networks and has been hosted on this server for quite some time
Also this same network of computers was able to access this website until a few hours ago No changes have been made to any IP firewall or any other server settings at our end.
When we run a tracert from this network it says Unable to resolve target system name
I dont know if the blame lies with the ISP as till yesterday this network was able to access everything fine
I just ordered a dedicated server from FDC.Now I want to register a domain from GoDaddy.
It asks for two DNS name. Normally it should be something like ns1.yourdomain.com and ns2.yourdomain.com. But the thing is, I don't even have a domain, how can I provide DNS like ns1.yourdomain.com? What I have now are two dediced IPs for future DNS, but GoDaddy won't accept IPs as DNS. Does this sound like egg first or chicken first delima?
can I use FDC DNS instead of mine own to register a domain from GoDaddy.
i have a domain on ipower.com and my hosting company wont give me a dns i only have 5 IP's how can i point my domain to my new dedicated server i just purchased a dedicated server and im new with it.
View 12 Replies View RelatedI got my backup server yesterday. It's connected to the second NIC on my main server, where I have all of my domains/accounts.
The server provider gave me a password and a ip address to the backup server, 192.168.x.x
I have tried to log in to the backup server with ssh and ftp from my main server.
Nothing happens, I can't connect.
Am I doing something wrong? I thought it just was to log in to my main server, and then ssh or ftp to the backup server.
i have a mysql databse on 1 server hosted by a company and i want to connect to that databse from a website hosted on another server by another company.
i have chnaged my php connect script from 'localhost' to the ip of the name server on port 3306, i know this isnt right..
how do i find the ip of my website and port of the db?
I have a domain and i have an ip address 111.111.11.1 which is free to be used.
I would like to assign that ip address to domain name so at the end when i enter 111.111.11.1 in my IE address bar it takes me to
I am new to windows server I would appreciate some help
ERROR:
Error connecting to IMAP server: localhost.
111 : Connection refused
I keep getting this error message from Squirelmail when i try to login can someone help me out.
I seem to be having problems every 20 accounts i create through clientexec work fine than i whole bunch dont i seem to be able to fix it by using a new hash key.
However it happened again at 44 accounts i dot have any idea what to do! i get a error log saying this.
If it helps all the signups are over 2 days.
Sorry, we could not create the account. The following error was
produced: The package was not found on the server.
Here is the list of plans found on the server:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
[url]
<html xmlns
<head>
<link rel
<meta http-equiv
<title>cPanel® 11</title>
</head>
<body>
<div id
<div id
</div>
<div id
<form action
<input type
<table width
<tr>
<td align
</tr>
<td>Username</td>
<td><input type
<tr class
<td>Password</td>
<td> </td>
</table>
</form>
<br />
</div>
© cPanel, Inc. 2006-2008
</body>
</html>
I have a problem connecting to my win2003 server from my work. The thing is that everything is turned off. I dont have administration rights. The remote connection in win xp doesnt work, telnet also dont work. Im behind proxy, all ports are closed. Is there any way, to install software on my server or smth else, so somehow i could connecti to my server remotely? I need to be able to connect to gui interface or maybe just be able to start programs, which crashed.
View 12 Replies View RelatedI'm running a local department website using xampp (apache, php, mysql) and we have a corporate lotus notes mail server. Is it possible to connect to and send mail via lotus notes using something like sendmail running under xampp?
View 0 Replies View Relatedi'm on Linux dedicated box -DirectAdmin panel
I use Squirrelmail to se my e-mail. When i try to log inn and read mail i get this message: Error connecting to IMAP server: localhost. Where can i change this......
Squirrelmail
SquirrelMail version 1.4.17
By the SquirrelMail Project Team
ERROR
Error connecting to IMAP server: localhost.
111 : Connection refused
webmail
ERROR (2): fsockopen() [function.fsockopen]: unable to connect to localhost:110 (Connection refused) (/var/www/html/webmail/inc/class.uebimiau_mail.php:80)
RoundCube Webmail
Connection to Imap server failed
Read on another forum, that this can solve the problem
/etc/rc.d/init.d/imaps restart
/etc/rc.d/init.d/imap restart
-bash: /etc/rc.d/init.d/imaps: No such file or directory
-bash: /etc/rc.d/init.d/imap: No such file or directory
telnet localhost 143 for imap or 993 for imap over ssl
Usage: telnet [-8] [-E] [-K] [-L] [-X atype] [-a] [-d] [-e char] [-k realm]
[-l user] [-f/-F] [-n tracefile] [-r] [-x] [host-name [port]]
Also Xinetd restart don't help
[root@server etc]# /etc/rc.d/init.d/xinetd restart
Stopping xinetd: [ OK ]
Starting xinetd: [ OK ]
Looks like that Imap isn't installed ?
Correct me if i'm wrong ..............
How do you go about setting up virtual machines so that they can see sites hosted on the host machine?
I've got Virtual PC 2007 and the disk image that MS supply for testing IE6 on Vista machines and I'm having trouble accessing my local Apache server (set up with XAMPP). Until recently I was able to set the XP VM's LAN settings to use a proxy server with the IP address of the host machine, but I got migrated to ADSL2+ yesterday by my ISP and now that's no longer working.
To access my sites locally, I set up httpd.conf like this:
PHP Code:
<VirtualHost *:80> DocumentRoot "C:PathToFolder" ServerName siteName.local</VirtualHost><Directory "C:PathToFolder"> Options FollowSymLinks AllowOverride None Order allow,deny Allow from all</Directory>
and then in Windows hosts file I add 127.0.0.1 siteName.local.
So what's the best way of getting the host and VMs to talk to each other?
I setup FTP access on Plesk, then when i try connect to the server it seems to be trying to access through a old installation on FileZilla Beta server manager, that was obviously installed on the server a while back. I can only think it is not using which ever FTP manager Plesk uses.
View 2 Replies View Relatedto upload some documents to my server.
Typically I have no problem doing this through Filezilla back in the states because I have a direct internet connection. However, where I am currently living I must go through a Proxy server.
I first tried connecting to the server with everything unchanged from back home and of course it didn't work. Next I went under settings and changed the proxy settings by selecting SOCKS4 (guessing), entering the host address for the Proxy server and the port number, but still no luck. I've also tried SOCKS4A and SOCKS5 with no luck.
I've also had similar problems with other less important software like AIM. Here I can also configure proxy settings, but it still does not work. My browsers work fine, but of course they were also configured with the proxy settings.
I just got a dedicated server and i'm gonna tell you know - i'm not an expert! Sort have came to a problem with a zone file missing. Im running centos with cpanel/whm I get the following error.
The zone for the root domain ******.com is missing, or could not be read. The ip address will be read from the webserver configuration and a new zone will be created for this subdomain. Bind reconfiguring on server1 using rndc
Created DNS entry for *******
No Entry Shows after either.
It seems that some whois info always says dedicated server even if the website on a VPS.
Well I guess we can consider a VPS to be a small Dedicated but I am just curious to know if there is a way to find whether a website actually on a VPS plan or on a Dedicated plan?
I just got setup with a dedicated server last night.. my first time .. im used to cpanel/whm on reseller accounts so paying for a dedicated is new to me..
1. I was given 3 ip address, galaxy, subnet and usable ip, what is the difference and under what circumstances do you use them and what one do you use?
2. I was told to setup my ips in my root, i am in there, do i just add them under IP FUNCTIONS one at time?
3. I need my DNS settings for namecheap to direct my domain over to the server, so i was told to setup my domain in cpanel in the root first and that will generate my dns address, can anyone explain the steps involved in that, what to click on? thanks
I've now VPS with CentOS and on Hypervm.
Can I connect to it using VPN or other client application as Desktop? or only Shell?
and if I want to setup on it ftp client like FileZella to get my files from the previous host directly what should I do?
I know the wget command but I think it for a single file and of course can't get php files so I think in ftp client application.
I was curious to know if it were possible to share your domain on a cluster server even if it has a dedicated IP and an SSL license assigned to it?
View 3 Replies View RelatedI'm having a problem connecting to SSH/Shell on my server. I get the Login Prompt, but when i enter the User/Pass i just get "SSH-2.0-OpenSSH_3.6.1p2", everything under that is blank.
I've restarted the SSH Server and made sure the account i was using was set to use Normal Shell (not jailed). What could be the problem?
I've purchased a NL Master reseller (about to purchase one in the US) and then a small VPS to see what more I could do, after transferring my site over to the VPS from the NL server I thought I'd come up with the idea with selling master reseller accounts, (both from NL and US master reseller services) the reason I came up with is because the VPS isn't to large to really do anything but seems perfect to keep a database, payment portal, WHMCS, my site, and hopefully all of my client information. What i want to do is somehow connect all 3 together so that when i do create a new client in LxAdmin I can select witch server I want to create it on and what package/permissions and what not, all from the VPS.
Example: LxAdmin -> create client -> fills out form basically similar that to the one in WHM
Resellers/VPS run CentOS Linux
WHM: 11.24.2
cPanel: 11.24.4-R35075
CENTOS 5.2 i686 virtuozzo
So basic question, is all this possible ? this including domains/email/ftp/ect.
I got HYPERVM Dedicated Server, i have create a VPS on it with LxAdmin Panel
But i am not able to reach to the domain added on LxAdmin panel,
1) Name Servers are setup correctly at registrar
2) DNS have been setup properly
I can even ping
ping mydomain.com -t
And it leaves ping to my server IP
THE PROBLEM is Port 80 is closed in VPS
Here is screenshot from HYPERVM of VPS panel where is shows port 80 is down
[url]
I even tried this command -
telnet mydomain.com 80
Connecting To mydomain.com...Could not open connection to the host, on
port 80: Connect failed
My Server Hosting provider is not willing to help me in this regards.
how can i open PORT 80?
I have a hosting company and maybe for my level this is a stupid question.
Well i have a server that have full up to 70%.
I order a new server,but how i will connect it with the first server which my company domain is there?
For example,clients which will go to server 2,and change the dns of their domains to ns1.mycompany.com and ns2.mycompany.com(which host in the 1 server)how will running up?
what i must do?
May i have to register ns3.mycompany.com and ns4.mycompany.com with the ips of the new server?
I have a domain which currently times out.
If you go to the secure (https) then it works fine.
The httpd.include file for the domain is ok:
<VirtualHost 87.117.194.71:443>
<VirtualHost 87.117.194.71:80>
Also, if you go to the IP 87.117.194.71 then it times out. If you go to secure 87.117.194.71 it works ? This is a dedicated IP, only this domain is configured for it.
I have other domains setup on this server and they all work fine, some are on a shared ip and some on a dedicated ip but this is the only one that will not work. Can anyone help?
I can't post URL's as this is my first post!
i have a windows shared hosting with Go-daddy, created the database and all is fine, but not sure about the DB name.
the name of the Database Host? is it local host?
shall i add any suffix to the DB name?
When traffic to my website gets heavy, connecting to the server really slows down. But, when connected, the site loads very fast and smooth. So why does it take like 4-12 seconds to connect to my server when traffic is heavy, and once connected it runs fast and smooth? I run Apache 2.2.3 on Debian 4. HostnameLookups is set to OFF. I have turned off all of the modules that I don't need, too. It also has MySQL 5.0 installed and is being used.
View 10 Replies View RelatedI have two servers (one for apache and one for SQL) where both are in the same DC. I looked at the BW graph and saw that the SQL server has pulled approx 4TB BW on the internet the last 30 days.
Since both are in the same DC, it would be better to run it via the network since it has free lan traffic compared to wasting a lot of "internet BW".
I'm currently using sqlservername.domain.com in the SQL connection string, but when I tried with the IP, the php script stalls for 30 seconds and then reports: "Can't connect to MySQL server on 'hostname' (4)".
Could this be a iptables issue? I also tried to add the apache IP in the "Additional MySQL Access Hosts" from cPanel, but that didn't help much.
Servers:
Apache - 10.1.0.xxx
SQL - 10.1.1.xxx
If I'm not mistaken, if the subnet isn't set to 255.255.255.0, both servers should be within range.