Clamav Compile Problem On Centos 4.3 64bit
I'm trying to install Clamav on my Centos box (64bit version) but on the Make command I get the following error:
/usr/local/lib/libz.a(gzio.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC
/usr/local/lib/libz.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
make[2]: *** [libclamav.la] Error 1
make[2]: Leaving directory `/root/clamav-0.88/libclamav'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/clamav-0.88'
make: *** [all] Error 2
I'm guessing is something to do with X86_64 but I still can't find a solution to this.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
CentOS 5x But 32bit Or 64bit
2 server configuration will look something like below. I heard that the 32bit kernel is better for the web server since I'll have cpanel on it. Anyone able to confirm this or should I just put 64bit on both of them? Web Server 5420 2.5GHz (Dual QuadCore) 2x250GB SATA2 (RAID1) 2GB RAM DB Server 5310 1.6GHz (Clovertown, DUAL processor) 2x73GB SAS (RAID1) 4GB RAM
View Replies!
View Related
Openvz Kernel On Centos 64bit
I was Use Centos 64bit and when i install the openvz kernel and the openvzquota: Quote: yum -y install ovzkernel yum -y install vzctrl vzquota vzpkg I reebot my server and never boot up I was planning to use a 8gb ram that's why i select 64bit.
View Replies!
View Related
CentOS 5.3 (64bit) SSH Port
I have changed the SSH port in sshd config, and restarted the server and sshd, but it still runs on port 22, and my firewall says its running but its not blocking anything either. I restarted iptables, and all that still nothing...
View Replies!
View Related
CentOS And ClamAV
Anybody have a version running on CentOS 4.4...if so what version...keeps complaining about libcrypt.so.5, libssl.so.5 and a few other things that are not updated yet on CentOS 4.4
View Replies!
View Related
How To Install ClamAV On Centos 5
I tried to install clamav, but i'm out of luck. It won't install at all. it gives the folloing error: Transaction Check Error: file /etc/freshclam.conf from install of clamav-0.95.1-4.el5.rf.i386 conflicts with file from package clamav-toaster-0.95.1-1.3.27.i386 ....
View Replies!
View Related
Getfile: Can't Write 1448 Bytes To /usr/share/clamav/clamav-917a563483a6171fe02eac005
I can't update Clamav. root@constan [~]# freshclam sda1: write failed, user block limit reached. ClamAV update process started at Sun Jul 26 15:56:52 2009 WARNING: Your ClamAV installation is OUTDATED! WARNING: Local version: 0.95.1 Recommended version: 0.95.2 DON'T PANIC! Read http://www.clamav.net/support/faq ERROR: chdir_tmp: Can't create directory ./clamav-1cb832b46c1c20fe798628ebf3ddf422 WARNING: Incremental update failed, trying to download main.cvd getfile: Can't write 1448 bytes to /usr/share/clamav/clamav-917a563483a6171fe02eac0059852cbe WARNING: Can't download main.cvd from database.clamav.net
View Replies!
View Related
64bit
There's idea to move to 64bit, Current Software Specs are:- CentOS 4.4 PHP 4.3 MySQL 5.0 Apache 2.0 No CPanel Named NFS Web site mainly running on Apache, PHP, MySQL and NFS. What do you think about stability of these softwares on 64bit processor. Also which better AMD Opteron or Intel woodcrest ?
View Replies!
View Related
32 Bit Or 64bit
32 bit or 64bit for cent Os 5.3? I am planning to purchase 2 vps for my friends, 1 vps which I am currently in touch is providing wide range, they gave option for 32bit or 64 bit, is there going to be change in the performance of the vps based on this selection and which is better for the future causes, this vps might have an community forum, few blogs and some file upload site,
View Replies!
View Related
32bit Vs. 64bit
I have been trying to research this but I cant seem to find an answer. The big question I am trying to figure out is the comparison in clock speed for different processor bits. For example, a 32 bit Pentium 4 at 3.2ghz versus a 64 bit AMD Athlon 2.0 Ghz?
View Replies!
View Related
Kernel Compile
I copied the default config file and renamed it as .config but I get this: Code: WARNING: No module dm-mem-cache found for kernel 2.6.27.10-grsec, continuing anyway WARNING: No module dm-region_hash found for kernel 2.6.27.10-grsec, continuing anyway WARNING: No module dm-message found for kernel 2.6.27.10-grsec, continuing anyway WARNING: No module dm-raid45 found for kernel 2.6.27.10-grsec, continuing anyway
View Replies!
View Related
2 Kernel Compile
when doing 2.6.26+ or w/e it is, how do you enable conntrack, what options do i need to enable under make menuconfig? net.netfilter.nf_conntrack_acct = 1 net.netfilter.nf_conntrack_generic_timeout = 120 error: "net.netfilter.nf_conntrack_icmp_timeout" is an unknown key error: "net.netfilter.nf_conntrack_tcp_timeout_close" is an unknown key error: "net.netfilter.nf_conntrack_tcp_timeout_time_wait" is an unknown key error: "net.netfilter.nf_conntrack_tcp_timeout_last_ack" is an unknown key error: "net.netfilter.nf_conntrack_tcp_timeout_close_wait" is an unknown key error: "net.netfilter.nf_conntrack_tcp_timeout_fin_wait" is an unknown key error: "net.netfilter.nf_conntrack_tcp_timeout_established" is an unknown key error: "net.netfilter.nf_conntrack_tcp_timeout_syn_recv" is an unknown key error: "net.netfilter.nf_conntrack_tcp_timeout_syn_sent" is an unknown key error: "net.netfilter.nf_conntrack_udp_timeout" is an unknown key error: "net.netfilter.nf_conntrack_udp_timeout_stream" is an unknown key net.netfilter.nf_conntrack_max = 262144 and how do i know which hardware/devices that i can remove?
View Replies!
View Related
64bit Windows Vpses
Are these unheard of? Are there any out there? Im looking at recompiling some custom server software into 64-bit ... (I am waiting on one library to be updated) .. to make use of the extra RAM allocations, and slight speed increase.
View Replies!
View Related
32bit Or 64bit VPS
while setting up a server which will host VPS's. Currently I have CentOS 5.1 x64 as the host OS, and I'm playing around with Xen for VPS's. Would you recommend a 32bit VPS, or a 64bit VPS?
View Replies!
View Related
MySQL Minimal Compile
I'm running off of a VPS and the default install of MySQL uses a lot of memory. Is there a way to just download the sources and compile a minimal install of just what i need to run say WHMCS/forum?
View Replies!
View Related
DKIM Compile Error
Running a RHEL 4 box with Sendmail 8.13, and Openssl 0.9.8 and trying to install DKIM 2.6.0. When I run 'sh Build' I get the follow errors at the end of the output. What is causing this error? What do I need to do to correct it? cc -O2 -I. -I../libdkim/ -I../../include -D_REENTRANT -DXP_MT -c -o dkim-filter.o dkim-filter.c cc -O2 -I. -I../libdkim/ -I../../include -D_REENTRANT -DXP_MT -c -o stats.o stats.c cc -O2 -I. -I../libdkim/ -I../../include -D_REENTRANT -DXP_MT -c -o test.o test.c cc -O2 -I. -I../libdkim/ -I../../include -D_REENTRANT -DXP_MT -c -o util.o util.c cc -o dkim-filter -lpthread config.o dkim-ar.o dkim-arf.o dkim-db.o dkim-filter.o stats.o test.o util.o -lmilter /usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a /usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libsm/libsm.a -ldb -lresolv -lcrypt -lnsl -ldl -lssl -lcrypto /usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a(dkim-canon.o)(.text+0x98): In function `dkim_canon_write': : undefined reference to `SHA256_Update' /usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a(dkim-canon.o)(.text+0xae8): In function `dkim_canon_init': : undefined reference to `SHA256_Init' /usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a(dkim-canon.o)(.text+0x106a): In function `dkim_canon_runheaders': : undefined reference to `SHA256_Final' /usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a(dkim-canon.o)(.text+0x155b): In function `dkim_canon_signature': : undefined reference to `SHA256_Final' /usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a(dkim-canon.o)(.text+0x1cab): In function `dkim_canon_closebody': : undefined reference to `SHA256_Final' collect2: ld returned 1 exit status make[1]: *** [dkim-filter] Error 1 make[1]: Leaving directory `/usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/dkim-filter' make: *** [all] Error 2
View Replies!
View Related
Cannot Compile PHP5 With CURL
I'm trying to compile PHP with curl enabled but I cannot get it work. Here is the part of config.log .... configure:32740: checking whether to enable calendar conversion support configure:32778: result: no configure:33078: checking whether to enable ctype functions configure:33116: result: yes configure:33416: checking for cURL support configure:33455: result: yes configure:33464: checking if we should use cURL for url streams configure:33482: result: no configure:33492: checking for cURL in default path configure:33497: result: found in /usr configure:33515: checking for cURL 7.10.5 or greater configure:33529: result: libcurl 7.15.5 configure:33538: checking for SSL support in libcurl configure:33542: result: yes configure:33560: checking how to run the C preprocessor configure:33678: result: gcc -E configure:33702: gcc -E conftest.c configure:33708: $? = 0 configure:33740: gcc -E conftest.c conftest.c:201:28: error: ac_nonexistent.h: No such file or directory configure:33746: $? = 1 configure: failed program was: | /* confdefs.h. */ | | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" ... As you can see it shows "ac_nonexistent.h: No such file or directory" I installed both gcc and gcc-c++ libraries but it doesn't work. PHP version is 5.2.6 and OS is CentOS 5 64bit
View Replies!
View Related
2.6.22.1 Kernel Compile Errors
I been trying to compile the linux2.6.22.1 with grsecurity test patches. Im running 2.6.21.5-grsecurity currently. And when i try to make bzImage and only the bzimage I get this error Code: /bin/sh: line 1: 14228 File size limit exceeded(core dumped) objcopy -O binary -R .note -R .comment -S vmlinux arch/i386/boot/compressed/vmlinux.bin make[2]: *** [arch/i386/boot/compressed/vmlinux.bin] Error 153 make[1]: *** [arch/i386/boot/compressed/vmlinux] Error 2 has an error number first but different ones each time. I tried the compile on gcc 3 and gcc 4 same thing. Other kernels compile fine except this one. I compiled the very same kernel, same config and evrything on a centos5 server and it done fine. never had this problem before and I always have always upgraded with grsecurity testing patches Im running centos 4.5 ulimit shows Code: [/linux]# ulimit -a core file size (blocks, -c) 1000000 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited pending signals (-i) 16317 max locked memory (kbytes, -l) 32 max memory size (kbytes, -m) unlimited open files (-n) 4096 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 14335 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Does the same thing on gcc version 3.4 and 4.1.1
View Replies!
View Related
Xen And 64bit Operating Systems
I tried installing CentOS 64bit using windows image and vnc that comes with HyperVM and it says (your cpu does not support long mode. use a 32 bit distribution), and if I try to install Windows Server 2008 I get blue screen with a stop and error.
View Replies!
View Related
Choosing 32bit Versus 64bit OS
I'm in the process of preparing to install CentOS 5 on my server, and was wondering whether most people recommend going with the 64bit version or sticking with 32bit. My server's CPU is 64-bit capable (Xeon 3060 at SoftLayer), and I have previously run CentOS 4.4 64bit on it, though I did have some struggles from time to time getting things to work (following setup guides that tend to assume 32bit more often than not). I'll be running just a standard setup of PHP 5, MySQL 5, and Apache 2, powering several moderate-traffic sites that run on the Drupal CMS (e.g. about 7000-10000 visitors per day total, though hopefully more in the future of course). I don't plan on running a control panel other than Webmin, though I might get DirectAdmin or similar in the future to make hosting some friends/clients a bit simpler. Will going with 64bit offer any worthwhile advantage with this setup?
View Replies!
View Related
How To Compile GD Library With TTF For PHP
First of all, here's the info about my server: Linux: CentOS 5.2 PHP: 5.2.6 PHP-GD: php-gd.i386 0:5.2.6-jason.1 Apache: 2.2.8 with mod_proxy (Lighttpd serves in the background)Question: I've built my server with PHP 5.2.6 and Apache and I've also installed php-gd by running 'yum install php-gd', but an application (clip bucket) I'm using requires GD with TTF enabled for the cpatcha image in 'singup'. I've checked my phpinfo [url] but didn't seem to find TTF enabled with my GD, so I wonder how to recompile GD with TTF enabled?
View Replies!
View Related
LiteSpeed PHP Compile Error
I'm running the latest free version of LSWS, standard install. I am having the hardest time getting PHP to build. No matter what I choose, it always gets the same error in the logs. Right now i'm trying to compile PHP 5.2.5 w/ Suhosin/Mail-header patch. About a minute into building it gives this error: /bin/sh /opt/lsws/phpbuild/php-5.2.5/libtool --silent --preserve-dup-deps --mode=compile gcc -Imain/ -I/opt/lsws/phpbuild/php-5.2.5/main/ -DPHP_ATOM_INC -I/opt/lsws/phpbuild/php-5.2.5/include -I/opt/lsws/phpbuild/php-5.2.5/main -I/opt/lsws/phpbuild/php-5.2.5 -I/usr//include/libxml2 -I/opt/lsws/phpbuild/php-5.2.5/ext/date/lib -I/opt/lsws/phpbuild/php-5.2.5/TSRM -I/opt/lsws/phpbuild/php-5.2.5/Zend -I/usr/include -g -O2 -c /opt/lsws/phpbuild/php-5.2.5/main/reentrancy.c -o main/reentrancy.lo /opt/lsws/phpbuild/php-5.2.5/main/reentrancy.c: In function 'php_readdir_r': /opt/lsws/phpbuild/php-5.2.5/main/reentrancy.c:139: error: too few arguments to function 'readdir_r' make: *** [main/reentrancy.lo] Error 1
View Replies!
View Related
Unable To Compile Apache Under Ubuntu
A little background on what I'm doing here... I'm setting up a Linux machine specifically for use as a VNC here at work. The IT Manager said he'd used Ubuntu before but left the distro up to me. I set up my test machine with Ubuntu but need to compile Apache for portions of it to work. I've never had any problems building Apache before, but this is what I'm getting here. I have a feeling that, since I've not used Ubuntu before, that I'm just missing a step. I also noticed that the "make" command doesn't work. Does that need to be installed and compiled as well? ========================================= root@vnc01:/etc/httpd-2.2.3# ./configure /usr/local/apache configure: WARNING: you should use --build, --host, --target configure: WARNING: invalid host type: /usr/local/apache checking for chosen layout... Apache checking for working mkdir -p... yes checking build system type... /usr/local/apache checking host system type... /usr/local/apache checking target system type... /usr/local/apache Configuring Apache Portable Runtime library ... checking for APR... reconfig configuring package in srclib/apr now configure: WARNING: you should use --build, --host, --target configure: WARNING: invalid host type: /usr/local/apache checking build system type... /usr/local/apache checking host system type... /usr/local/apache checking target system type... /usr/local/apache Configuring APR library Platform: /usr/local/apache checking for working mkdir -p... yes APR Version: 1.2.7 checking for chosen layout... apr checking for /usr/local/apache-gcc... no checking for gcc... no checking for /usr/local/apache-cc... no checking for cc... no checking for cc... no checking for /usr/local/apache-cl... no checking for cl... no configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. configure failed for srclib/apr root@vnc01:/etc/httpd-2.2.3# The config.log file doesn't honestly show any errors that I can see pertaining to any compile errors.
View Replies!
View Related
What Would Cause Apache To Restart And Not Compile PHP
Today I got the devastating and heart-stopping news that all administraters fear most: "I'm looking at your website, and something's terribly wrong!!!" The person went on to say that each page was just "filled with code ro something." When I finally saw it myself I discovered that my raw PHP pages were being served to the end user with no compilation --all of my top secret code; a real nightmare. I went to look at the error logs and found that for several restarts Apache had not been compiling PHP. It usually looks like this: Quote: [Wed Apr 18 18:35:11 2007] [notice] bandwidth monitoring enabled (mapping file: /etc/virtualhosting/mappings/apache.domainmap) [Wed Apr 18 18:35:11 2007] [notice] Apache/1.3.27 (Unix) (Red-Hat/Linux) mod_gzip/1.3.19.1a mod_fastcgi/2.2.10 mod_jk/1.2.0 mod_perl/1.24_01 PHP/4.2.2 FrontPage/5.0.2 mod_ssl/2.8.12 OpenSSL/0.9.6b configured -- resuming normal operations [Wed Apr 18 18:35:11 2007] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Wed Apr 18 18:35:11 2007] [notice] Accept mutex: sysvsem (Default: sysvsem) [Wed Apr 18 18:35:11 2007] [notice] FastCGI: process manager initialized (pid 16385) But now it looked like this: Quote: [Sun Apr 22 04:02:18 2007] [notice] Apache/1.3.27 (Unix) (Red-Hat/Linux) mod_gzip/1.3.19.1a configured -- resuming normal operations [Sun Apr 22 04:02:18 2007] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Sun Apr 22 04:02:18 2007] [notice] Accept mutex: sysvsem (Default: sysvsem) [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/a1b2c3d4e5f6g7h8i9/nonexistentfile.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/adxmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/adserver/adxmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/phpAdsNew/adxmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/phpadsnew/adxmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/phpads/adxmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/Ads/adxmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/ads/adxmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/xmlrpc/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/xmlsrv/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/blog/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/drupal/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/community/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/blogs/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/blogs/xmlsrv/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/blog/xmlsrv/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/blogtest/xmlsrv/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/b2/xmlsrv/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/b2evo/xmlsrv/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/wordpress/xmlrpc.php [Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/phpgroupware/xmlrpc.php [Mon Apr 23 04:02:21 2007] [notice] SIGUSR1 received. Doing graceful restart WTH? I could be WAAAY off base, but my first reaction was that I'd been hacked -- someone had found a way to disable PHP so they could find sensitive information in raw PHP pages. That could be totally wrong. At any rate, even if I never learn why Apache sometimes will compile without PHP (and some other modules) without me telling it to do so, I'd like to be prepared for an embarassment like like this. Is there any way, say, in the .htaccess file (or anywhere, anyway), I can tell Apache not to serve **ANY** pages unless the PHP module is present?
View Replies!
View Related
Bizarre Apache Compile Error
Recently purchased a new dedicated machine from a Savvis wholesaler, with intentions of using it as a backup server, CentOS 5.0 default install with default install of cPanel/WHM (not configured by the DC) -- Went to recompile apache with the appropriate addons and modules and this is why I get, any ideas? Quote: WHM 11.2.0 cPanel 11.11.0-R16948 CENTOS Enterprise 5 i686 - WHM X v3.1.0 Linux local.hostname 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 athlon i386 GNU/Linux Quote: Building Apache Config.....Done Downloading and compiling apache+modules.... Fetching http://layer1.cpanel.net/buildapache.sea (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done Verifying archive integrity... All good. Uncompressing buildapache........................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ........................................................................................................................................... Checking Update System........Rpm Sanity Check PASSED! Verifying compiler and libs....Verifying installation....Kernel Headers look good! Using newyum support... Loading "installonlyn" plugin Setting up Install Process Setting up repositories Reading repository metadata in from local files Excluding Packages in global exclude list Finished Parsing package install arguments Nothing to do /scripts/ensurerpm [@buildapache]...(--quiet --safe libxpm4 ImageMagick libxpm4-devel libxpm4-dev ncurses ncurses-devel ncurses-dev libncurses5 libncurses5-devel libncurses5-dev gettext gdbm gdbm-devel libgdbm2-devel libgdbm2-dev db4 db4-devel db4-dev db1 db1-devel db1-dev db1-tools patch kernel-headers linux-headers glibc-kernheaders pam-devel pam-dev krb5-devel krb5-dev openssl openssl-devel ssl-dev libssl-dev openssl-dev libopenssl0 libopenssl0-devel libopenssl0-dev flex lex bison glibc-devel glibc-dev gcc gcc-c++ libgcc cpp libstdc++ libstdc++-devel libstdc++-dev jpeg libjpeg libjpeg-devel libjpeg-dev libjpeg62 libjpeg62-devel libjpeg62-dev png libpng libpng-devel libpng-dev libpng10 libpng10-devel libpng3 libpng3-devel libpng3-dev libtiff libtiff-devel libtiff-dev libtiff3 libtiff3-devel libtiff3-dev XFree86-libs XFree86-devel XFree86-dev libopenssl0.9.7-devel libopenssl0.9.7-static-devel libltdl xorg-x11-devel pspell pspell-devel zlib zlib-devel zlib1-devel libz-devel tdl aspell aspell-devel xorg-x11-devel libc-client-devel libtool automake libungif-devel libtool-libltdl-devel libtool-ltdl-devel libltdl-devel libltdl3-devel).... . . . . . Done Done Done ******************************** This is buildapache version 1.5.402 (for cpanel <= 10.9.3) (ap=1.3.37) ******************************** buildapache configured from Web Host Manager Apache configured from Web Host Manager! Untarring expat...Fetching http://httpupdate.cpanel.net/buildap...-1.95.6.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...4%...5%...7%...8%...9%...11%...12%...14%...15%...16%...18%...19%...21%...22%...23%... 25%...26%...28%...29%...30%...32%...33%...35%...36%...37%...39%...40%...42%...43%...44%...46%...47%...49%...50%...51%...53%...54%...56%...57%...58%... 60%...61%...63%...64%...65%...67%...68%...70%...71%...72%...74%...75%...77%...78%...79%...81%...82%...84%...85%...87%...88%...89%...91%...92%...94%... 95%...96%...98%...99%...100%......Done Done ./configure [@expat-1.95.6]...(--prefix=/usr).... . . . Done make [@expat-1.95.6]...(-j 1).... . . . . . . . . Done make [@expat-1.95.6]...(install).... Done Untarring apache.... Fetching http://httpupdate.cpanel.net/buildap..._1.3.37.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done Suexec w/php Standard Patch patching file configure Hunk #1 succeeded at 416 (offset 1 line). Hunk #3 succeeded at 1317 (offset 1 line). patching file src/main/util_script.c Hunk #1 succeeded at 1170 (offset 1 line). patching file src/modules/standard/mod_cgi.c Hunk #1 succeeded at 37 (offset 1 line). Hunk #3 succeeded at 292 (offset 1 line). Hunk #4 succeeded at 362 with fuzz 2 (offset -7 lines). Hunk #5 succeeded at 427 (offset 1 line). Hunk #6 succeeded at 600 (offset -7 lines). patching file src/support/suexec.c Hunk #1 succeeded at 51 (offset 1 line). Hunk #3 succeeded at 383 (offset 1 line). Hunk #5 succeeded at 662 (offset 1 line). patching file src/support/suexec.h Hunk #1 succeeded at 19 (offset 1 line). Suexec MailMan Patch patching file src/support/suexec.c Hunk #1 succeeded at 478 (offset 43 lines). Fileprotect Suexec+Php Standard Patch patching file src/support/suexec.c Hunk #1 succeeded at 232 (offset -43 lines). Hunk #3 succeeded at 600 (offset -43 lines). HTTPS var Standard Patch patching file src/support/suexec.c Hunk #1 succeeded at 139 (offset -35 lines). ./configure [@apache_1.3.37]...(--enable-shared=max).... . . Done patching file src/include/httpd.h Hunk #1 succeeded at 273 (offset -43 lines). Fetching http://httpupdate.cpanel.net/buildap...-1.3.37.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done Untarring modssl.... patching file pkg.sslmod/libssl.module ./configure [@mod_ssl-2.8.28-1.3.37]...(--with-apache=../apache_1.3.37 --with-ssl=/usr --enable-module=expires --enable-shared=expires --add-module=../mod_frontpage.c --enable-suexecphp --enable-module=rewrite --enable-shared=rewrite --enable-suexec --suexec-logfile=/usr/local/apache/logs/suexec_log --suexec-caller=nobody --suexec-uidmin=100 --suexec-gidmin=100 --suexec-docroot=/ --suexec-userdir=public_html).... . . . . . . . . . . Done ./configure [@apache_1.3.37]...(--enable-module=ssl --enable-module=expires --enable-shared=expires --add-module=../mod_frontpage.c --enable-suexecphp --enable-module=rewrite --enable-shared=rewrite --enable-suexec --suexec-logfile=/usr/local/apache/logs/suexec_log --suexec-caller=nobody --suexec-uidmin=100 --suexec-gidmin=100 --suexec-docroot=/ --suexec-userdir=public_html).... . . . Done make [@apache_1.3.37]...(-j 1).... . . . . . . . . . . . . Done make [@apache_1.3.37]...(install).... Done make[1]: *** [install-data] Error 127 make: *** [install-all] Error 2 /etc/rc.d/init.d/httpd start: httpd could not be started Setting /home permissions to 0711......Done Setting permissions for........Done This script will install Postgres 7.3.x or later If you have an older version installed you wil need to Dump your databases to a file and then restore them after the install as 7.3.x is not backwards compatible. If you do not have any databases, you can just run: mv /var/lib/pgsql /var/lib/pgsql.old /sbin/service postgresql stop /sbin/service postgresql start to force creating a 7.3.x style setup. Do not do this if you have databases that you wish to keep! Are you sure you wish to proceed? Loading "installonlyn" plugin Setting up Install Process Setting up repositories Reading repository metadata in from local files Excluding Packages in global exclude list Finished Parsing package install arguments Nothing to do Stopping postgresql service: [ OK ] Starting postgresql service: [ OK ] You should now configure postgresql from WHM! You should now configure postgresql from WHM! You should now configure postgresql from WHM! You should now configure postgresql from WHM! Fetching http://httpupdate.cpanel.net/buildap...-2.6.22.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done ./configure [@libxml2-2.6.22]...(--prefix=/usr).... . . . . . . . . . . . . . . . . Done make [@libxml2-2.6.22]...(-j 1).... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Done make [@libxml2-2.6.22]...(install).... . Done Fetching http://httpupdate.cpanel.net/buildap...-7.15.3.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done Untarring curl......Done ./configure [@curl-7.15.3]...(--prefix=/usr).... . . . . . . . . . . . . . . . . . . . . . . . Done make [@curl-7.15.3]...(-j 1).... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Done make [@curl-7.15.3]...(install).... . Done Fetching http://httpupdate.cpanel.net/buildap...p-5.2.4.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done Untarring php....Done patching file configure Running configure: LDFLAGS="-L/usr/X11R6/lib64" /home/cpapachebuild/buildapache/callbacklog --prog configure --dir /home/cpapachebuild/buildapache/build-log -- --with-apxs=/usr/local/apache/bin/apxs --prefix=/usr/local --with-xml --enable-bcmath --enable-calendar --with-curl --enable-ftp --with-gd --with-jpeg-dir=/usr/local --with-png-dir=/usr --with-xpm-dir=/usr/X11R6 --enable-magic-quotes --with-mysqli --with-mysql=/usr --with-openssl --enable-discard-path --with-pear --with-pgsql=/usr --enable-sockets --enable-track-vars --with-zlib ./configure [@php-5.2.4]...(--with-apxs=/usr/local/apache/bin/apxs --prefix=/usr/local --with-xml --enable-bcmath --enable-calendar --with-curl --enable-ftp --with-gd --with-jpeg-dir=/usr/local --with-png-dir=/usr --with-xpm-dir=/usr/X11R6 --enable-magic-quotes --with-mysqli --with-mysql=/usr --with-openssl --enable-discard-path --with-pear --with-pgsql=/usr --enable-sockets --enable-track-vars --with-zlib).... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Done make [@php-5.2.4]...(-j 1 clean).... Done make [@php-5.2.4]...(-j 1).... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Done make [@php-5.2.4]...(install).... Done make: *** [install-sapi] Error 1 /etc/rc.d/init.d/httpd start: httpd could not be started ./configure [@php-5.2.4]...(--prefix=/usr --with-xml --enable-bcmath --enable-calendar --with-curl --enable-ftp --with-gd --with-jpeg-dir=/usr/local --with-png-dir=/usr --with-xpm-dir=/usr/X11R6 --enable-magic-quotes --with-mysqli --with-mysql=/usr --with-openssl --enable-discard-path --with-pear --with-pgsql=/usr --enable-sockets --enable-track-vars --with-zlib).... . . . . . . . . . . . . . Done make [@php-5.2.4]...(-j 1 clean).... Done make [@php-5.2.4]...(-j 1).... . . . . . . . . . . Done make [@php-5.2.4]...(install).... . . . . . . . . . Done initfpsuexec: using apache 1.x support PHP version file has been updated to ./build all ./build install initfpsuexec: using apache 1.x support Attempting to restart httpd Waiting for httpd to restart.... etc etc failed.. Furthermore httpd.conf in /usr/local/apache/conf only contains the following; Quote: ErrorDocument 400 /400.shtml ErrorDocument 401 /401.shtml ErrorDocument 403 /403.shtml ErrorDocument 404 /404.shtml ErrorDocument 500 /500.shtml ScriptAlias /cgi-sys/ /usr/local/cpanel/cgi-sys/ Alias /bandwidth/ /usr/local/bandmin/htdocs/ Alias /sys_cpanel/ /usr/local/cpanel/sys_cpanel/ Alias /java-sys/ /usr/local/cpanel/java-sys/ Alias /img-sys/ /usr/local/cpanel/img-sys/ Alias /akopia/ /usr/local/cpanel/3rdparty/interchange/share/akopia/ Alias /neo-images/ /usr/local/cpanel/base/neomail/neo-images/ ScriptAliasMatch ^/cpanel/(.*) /usr/local/cpanel/cgi-sys/redirect.cgi ScriptAlias /cpanel /usr/local/cpanel/cgi-sys/redirect.cgi ScriptAlias /whm /usr/local/cpanel/cgi-sys/whmredirect.cgi ScriptAlias /securewhm /usr/local/cpanel/cgi-sys/swhmredirect.cgi ScriptAlias /webmail /usr/local/cpanel/cgi-sys/wredirect.cgi ScriptAliasMatch ^/webmail/(.*) /usr/local/cpanel/cgi-sys/wredirect.cgi ScriptAliasMatch ^/kpanel/(.*) /usr/local/cpanel/cgi-sys/redirect.cgi ScriptAlias /controlpanel /usr/local/cpanel/cgi-sys/redirect.cgi ScriptAlias /securecontrolpanel /usr/local/cpanel/cgi-sys/sredirect.cgi Alias /mailman/archives/ /usr/local/cpanel/3rdparty/mailman/archives/public/ ScriptAlias /mailman/ /usr/local/cpanel/3rdparty/mailman/cgi-bin/ Alias /pipermail/ /usr/local/cpanel/3rdparty/mailman/archives/public/ Alias /interchange/ /usr/local/cpanel/3rdparty/interchange/share/interchange/ Alias /interchange-5/ /usr/local/cpanel/3rdparty/interchange/share/interchange-5/ Even tried removing /usr/local/apache then running easyapache, but no such luck as it replaces the config with the same thing.
View Replies!
View Related
Imap-2004g Php5 64bit Error
/usr/bin/ld: /usr/local/imap-2004g/lib/libc-client.a(osdep.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC /usr/local/imap-2004g/lib/libc-client.a: could not read symbols: Bad value collect2: ld returned 1 exit status make: *** [libphp5.la] Error 1 This happens in php recompile When trying to install under 64bit
View Replies!
View Related
Vmware Server Problem With OS 64bit And Some Cpus
Many people have some problems with vmware server on some 64bit operation systems. If your server's ram is more than 6GB, you have to have a 64bit OS but I have tried to install vmware server on a 64bit server, it seems to be crashing my vmware server every 5 min and I cant use it more until I reset this service. CPU : Intel Xeon Nehalem 3440 2.53Ghz Quad Core w/ HyperThreading (8 virtual cores) Ram : 4 GB DDR2 Os : CentOS 64bit I have had an another server and i have solved this problem whit Debian. but on CentOS I usually have problem, and I cant use vmware server. Have you any idea how i solve this problem on CentOS 64bit?
View Replies!
View Related
Cpanel Installed Over Plesk On Fed4-64bit
I am pleased to report success with my first attempt of installing Cpanel on a 64bit vps running Fed4. In fact..this is the first time in known history I have tried anything this..uhhh.."risky"..and it work the very first time. Cpanel had no problems completely replacing the already pre-installed plesk. Kudos to the Cpanel folks for that!
View Replies!
View Related
Yum Etc Vs Manual Compile - Specifically Apache
We run CentOS for our web servers (not providing hosting) and manually compile Apache, PHP etc. What would be the benefits to using Yum rather than compiling the software ourselves? The way I see it, Yum allows Apache etc to automatically update to latest versions and saves time. When compiling myself though, I can specify exactly where to install to and which modules etc to install with the software. Is there any reason we should be using Yum instead?
View Replies!
View Related
RHEL 5 - 32bit V 64bit Running Cpanel 11 For Hosting
As cPanel is an integral part of server hosting and has the ability of compiling Apache 1.3.x with PHP4 (cgi) and PHP5 (dso) on your server OS. Does anyone know or have baselines/benchmarks for which performs better generally for hosting: 32bit or 64bit RedHat 5 when cPanel 11 has compiled for the Apache and php mentioned above on either of these OS editions? (assume latest versions of apache/php4/5) I was wondering if 32bit performed better or 64bit on a quad core Xeon. Don't forget PHP is compiled for prefork and not multi-threading for Apache 1.3.41 (which are considered legacy 32bit forked apps compiled against 64bit OS). Or rephrased, could i be hampering performance by running it on a 64bit OS on a Xeon (X3210) or improving performance? I'd assume 64bit would offer better all round processing power, or is this a misconception. I recently decided to get a server on RedHat Enterprise 5 X86_64 (64bit), when i wondered if 32bit version would have provided better performance and been the better options for compatibility.
View Replies!
View Related
ClamAV Problems
My hosting provider (which will go unnamed because I doubt they would appreciate me broadcasting the fact that their server-based antivirus software isn't working properly) is experiencing almost daily email delivery failures on multiple shared servers because ClamAV stops working. They say they are running the latest stable versions of exim and ClamAV, but that "there is no guarantee...that the clamav error will not happen again". Right around the time this started happening, there was an article on the ComputerWorld web site (http://www.computerworld.com/action/...icleId=9077638) about a ClamAV patch being released to fix a security vulnerability. I'm wondering whether that patch was buggy, and whether other hosting providers are having problems with ClamAV. (It would probably be a good idea not to mention any providers by name because of the security implications.)
View Replies!
View Related
ClamAV - Should We Enable It?
I would like to ask whether should we use/enable the clamAV service on our VPS? I have read from several article, it said that ClamAV is pretty hungry on CPU/Memory resources. I would like to know, do you use/enable the clamAV on your VPS? Or even don't have it installed on your VPS?
View Replies!
View Related
Disable Clamav
How can I disable clamav on cpanel server and make sure that it's not running because when clamav is running the outlook is not working so I have to restart clamav every time.
View Replies!
View Related
Clamav Checking
I have it installed on server, but sometimes it's dead, but no warning from system. It will prevent emails working then. So I wonder if there is any way to check clamav? when it's not working, system will release an email to the admin?
View Replies!
View Related
ClamAV (clamd)
I guess most of you are familiar with clamAV but i wanna use this as a cpanel plugin and provide my customer the anti virus option in cpanel.. how do i do this? ive already install clamAV on ym server.
View Replies!
View Related
|
TRACKER
