2 Kernel Compile
Jul 12, 2009
when doing 2.6.26+ or w/e it is, how do you enable conntrack, what options do i need to enable under make menuconfig?
net.netfilter.nf_conntrack_acct = 1
net.netfilter.nf_conntrack_generic_timeout = 120
error: "net.netfilter.nf_conntrack_icmp_timeout" is an unknown key
error: "net.netfilter.nf_conntrack_tcp_timeout_close" is an unknown key
error: "net.netfilter.nf_conntrack_tcp_timeout_time_wait" is an unknown key
error: "net.netfilter.nf_conntrack_tcp_timeout_last_ack" is an unknown key
error: "net.netfilter.nf_conntrack_tcp_timeout_close_wait" is an unknown key
error: "net.netfilter.nf_conntrack_tcp_timeout_fin_wait" is an unknown key
error: "net.netfilter.nf_conntrack_tcp_timeout_established" is an unknown key
error: "net.netfilter.nf_conntrack_tcp_timeout_syn_recv" is an unknown key
error: "net.netfilter.nf_conntrack_tcp_timeout_syn_sent" is an unknown key
error: "net.netfilter.nf_conntrack_udp_timeout" is an unknown key
error: "net.netfilter.nf_conntrack_udp_timeout_stream" is an unknown key
net.netfilter.nf_conntrack_max = 262144
and how do i know which hardware/devices that i can remove?
View 2 Replies
ADVERTISEMENT
Jun 20, 2009
I copied the default config file and renamed it as .config but I get this:
Code:
WARNING: No module dm-mem-cache found for kernel 2.6.27.10-grsec, continuing anyway
WARNING: No module dm-region_hash found for kernel 2.6.27.10-grsec, continuing anyway
WARNING: No module dm-message found for kernel 2.6.27.10-grsec, continuing anyway
WARNING: No module dm-raid45 found for kernel 2.6.27.10-grsec, continuing anyway
View 2 Replies
View Related
Jun 29, 2009
How do you go about getting hardware info so you know what drivers to compile in? I want to build a very small and fast loading kernel for this web server.
I'm running CentOS 5.3
View 4 Replies
View Related
Aug 13, 2007
I been trying to compile the linux2.6.22.1 with grsecurity test patches. Im running 2.6.21.5-grsecurity currently. And when i try to make bzImage and only the bzimage I get this error
Code:
/bin/sh: line 1: 14228 File size limit exceeded(core dumped) objcopy -O binary -R .note -R .comment -S vmlinux arch/i386/boot/compressed/vmlinux.bin
make[2]: *** [arch/i386/boot/compressed/vmlinux.bin] Error 153
make[1]: *** [arch/i386/boot/compressed/vmlinux] Error 2
has an error number first but different ones each time. I tried the compile on gcc 3 and gcc 4 same thing.
Other kernels compile fine except this one. I compiled the very same kernel, same config and evrything on a centos5 server and it done fine. never had this problem before and I always have always upgraded with grsecurity testing patches
Im running centos 4.5
ulimit shows
Code:
[/linux]# ulimit -a
core file size (blocks, -c) 1000000
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
pending signals (-i) 16317
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 4096
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 14335
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
Does the same thing on gcc version 3.4 and 4.1.1
View 2 Replies
View Related
Jun 27, 2009
Just wondering for anyone whos done a kernel compile on an Atom based machine, how long did it take?
View 1 Replies
View Related
Mar 29, 2007
we have one box in hivelocity.net that has been down so many times this month that we were forced to remove links to siteuptime where we were once so proud of having a 99.7% uptime for 3 years in theplanet.
syslog shows that just before crashing, these entries were made:
kernel: kernel BUG at mm/rmap.c:479
kernel: invalid operand:0000 [#1]
dmesg also shows this:
...
Brought up 2 CPUs
zapping low mappings.
checking if image is initramfs... it is
Freeing initrd memory: 482k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf9f20, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
...
i've googled these messages and they point to ram problems.
hivelocity.net claims to have done diagnostics on the box and that there were no problems reported.
they said this is a result of a sys configuration problem made by us.
any ideas?
View 8 Replies
View Related
May 20, 2009
running centos/virtuozzo 2.6.18-028stab062.3
when i configure vmware it asks at one point for kernel header files. where would i find them to match the current kernel?
i asked at parallels forums but help there is very scarce. i checked openVZ repositories and they dont yet have headers for this version.
what are my options? i have one last windows machine left and want to run it in VMware.
View 0 Replies
View Related
Apr 29, 2007
Last year I ordered a new server with Centos 4.3 and it had the kernel kernel 2.6.9-34.0.2ELsmp installed. It runned fine and I didn't update any packages since then.
Today I started getting a problem where both mysqld and kswapd0 uses very high amounts of CPU, spiking up to 100% and my memory usage is at 99% all the time. The problem seems exactly the same as the one mentioned in this thread.
In that thread the exact same kernel is said to be insecure and to cause this problem. I also came across a centOS bug that reports this problem with high cpu, mem usage and mysql & kswapd0 consuming all resources.
In the linked thread the person solved the problem by upgrading to kernel 2.6.9-42 using rpms but others recommended a newer kernel or a custom compiled kernel for CentOS.
Apparently when they used yum it said 34.0.2 was the latest kernel.
What should I do to upgrade the kernel, which version should i upgrade to, and where do I get it from? I won't be able to compile a custom kernel and I've only installed basic rpm packages before.
View 5 Replies
View Related
Mar 6, 2007
How to compile php as cgi? It doesn't have any control panel. Do I need to compile together?
View 2 Replies
View Related
Apr 1, 2008
How to compile PHP with PHP IMAP?
I'm also having problem finding latest PHP IMAP rpm
I'm confused over many articles I googled for including php.net, btw i'm using Centos 5.1.
How do I overall compile my apache with php imap?
View 5 Replies
View Related
Oct 27, 2008
First of all, here's the info about my server:
Linux: CentOS 5.2
PHP: 5.2.6
PHP-GD: php-gd.i386 0:5.2.6-jason.1
Apache: 2.2.8 with mod_proxy (Lighttpd serves in the background)Question:
I've built my server with PHP 5.2.6 and Apache and I've also installed php-gd by running 'yum install php-gd', but an application (clip bucket) I'm using requires GD with TTF enabled for the cpatcha image in 'singup'. I've checked my phpinfo [url] but didn't seem to find TTF enabled with my GD, so I wonder how to recompile GD with TTF enabled?
View 8 Replies
View Related
Mar 9, 2008
Was wondering if there's anyway we can compile apache from scratch with 1000 maxclient instead of the 250 default.
View 3 Replies
View Related
Feb 22, 2007
when we compile apache, why do we need to have the following option?
'./configure' '--with-apxs=/usr/local/apache/bin/apxs
View 3 Replies
View Related
Feb 13, 2007
I installed lighttpd on fedora 4 using yum install lighttpd now everything seemed to work as planed but the php files doesn't work .php
how to re-compile php?
View 4 Replies
View Related
Jan 10, 2007
I want to compile a php-cgi on dreamhost with maximum security in particular ensuring that all temporary files are stored in my own directories, what are the settings to configure for that?
What .htaccess settings do I need to help with that?
I realized that some of the temp gzip files where going into the servers main temp folders.
View 0 Replies
View Related
Apr 17, 2009
I'm running off of a VPS and the default install of MySQL uses a lot of memory. Is there a way to just download the sources and compile a minimal install of just what i need to run say WHMCS/forum?
View 4 Replies
View Related
Jul 2, 2008
Running a RHEL 4 box with Sendmail 8.13, and Openssl 0.9.8 and trying to install DKIM 2.6.0.
When I run 'sh Build' I get the follow errors at the end of the output. What is causing this error? What do I need to do to correct it?
cc -O2 -I. -I../libdkim/ -I../../include -D_REENTRANT -DXP_MT -c -o dkim-filter.o dkim-filter.c
cc -O2 -I. -I../libdkim/ -I../../include -D_REENTRANT -DXP_MT -c -o stats.o stats.c
cc -O2 -I. -I../libdkim/ -I../../include -D_REENTRANT -DXP_MT -c -o test.o test.c
cc -O2 -I. -I../libdkim/ -I../../include -D_REENTRANT -DXP_MT -c -o util.o util.c
cc -o dkim-filter -lpthread config.o dkim-ar.o dkim-arf.o dkim-db.o dkim-filter.o stats.o test.o util.o -lmilter /usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a /usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libsm/libsm.a -ldb -lresolv -lcrypt -lnsl -ldl -lssl -lcrypto
/usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a(dkim-canon.o)(.text+0x98): In function `dkim_canon_write':
: undefined reference to `SHA256_Update'
/usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a(dkim-canon.o)(.text+0xae8): In function `dkim_canon_init':
: undefined reference to `SHA256_Init'
/usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a(dkim-canon.o)(.text+0x106a): In function `dkim_canon_runheaders':
: undefined reference to `SHA256_Final'
/usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a(dkim-canon.o)(.text+0x155b): In function `dkim_canon_signature':
: undefined reference to `SHA256_Final'
/usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/libdkim/libdkim.a(dkim-canon.o)(.text+0x1cab): In function `dkim_canon_closebody':
: undefined reference to `SHA256_Final'
collect2: ld returned 1 exit status
make[1]: *** [dkim-filter] Error 1
make[1]: Leaving directory `/usr/local/src/mail/dkim-milter-2.6.0/obj.Linux.2.6.9-67.0.7.ELsmp.i686/dkim-filter'
make: *** [all] Error 2
View 0 Replies
View Related
Jul 29, 2008
I'm trying to compile PHP with curl enabled but I cannot get it work.
Here is the part of config.log
....
configure:32740: checking whether to enable calendar conversion support
configure:32778: result: no
configure:33078: checking whether to enable ctype functions
configure:33116: result: yes
configure:33416: checking for cURL support
configure:33455: result: yes
configure:33464: checking if we should use cURL for url streams
configure:33482: result: no
configure:33492: checking for cURL in default path
configure:33497: result: found in /usr
configure:33515: checking for cURL 7.10.5 or greater
configure:33529: result: libcurl 7.15.5
configure:33538: checking for SSL support in libcurl
configure:33542: result: yes
configure:33560: checking how to run the C preprocessor
configure:33678: result: gcc -E
configure:33702: gcc -E conftest.c
configure:33708: $? = 0
configure:33740: gcc -E conftest.c
conftest.c:201:28: error: ac_nonexistent.h: No such file or directory
configure:33746: $? = 1
configure: failed program was:
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
...
As you can see it shows "ac_nonexistent.h: No such file or directory" I installed both gcc and gcc-c++ libraries but it doesn't work.
PHP version is 5.2.6 and OS is CentOS 5 64bit
View 7 Replies
View Related
Feb 4, 2008
I'm running the latest free version of LSWS, standard install.
I am having the hardest time getting PHP to build.
No matter what I choose, it always gets the same error in the logs.
Right now i'm trying to compile PHP 5.2.5 w/ Suhosin/Mail-header patch.
About a minute into building it gives this error:
/bin/sh /opt/lsws/phpbuild/php-5.2.5/libtool --silent --preserve-dup-deps --mode=compile gcc -Imain/ -I/opt/lsws/phpbuild/php-5.2.5/main/ -DPHP_ATOM_INC -I/opt/lsws/phpbuild/php-5.2.5/include -I/opt/lsws/phpbuild/php-5.2.5/main -I/opt/lsws/phpbuild/php-5.2.5 -I/usr//include/libxml2 -I/opt/lsws/phpbuild/php-5.2.5/ext/date/lib -I/opt/lsws/phpbuild/php-5.2.5/TSRM -I/opt/lsws/phpbuild/php-5.2.5/Zend -I/usr/include -g -O2 -c /opt/lsws/phpbuild/php-5.2.5/main/reentrancy.c -o main/reentrancy.lo
/opt/lsws/phpbuild/php-5.2.5/main/reentrancy.c: In function 'php_readdir_r':
/opt/lsws/phpbuild/php-5.2.5/main/reentrancy.c:139: error: too few arguments to function 'readdir_r'
make: *** [main/reentrancy.lo] Error 1
View 3 Replies
View Related
Apr 22, 2007
Today I got the devastating and heart-stopping news that all administraters fear most: "I'm looking at your website, and something's terribly wrong!!!"
The person went on to say that each page was just "filled with code ro something." When I finally saw it myself I discovered that my raw PHP pages were being served to the end user with no compilation --all of my top secret code; a real nightmare.
I went to look at the error logs and found that for several restarts Apache had not been compiling PHP.
It usually looks like this:
Quote:
[Wed Apr 18 18:35:11 2007] [notice] bandwidth monitoring enabled (mapping file: /etc/virtualhosting/mappings/apache.domainmap)
[Wed Apr 18 18:35:11 2007] [notice] Apache/1.3.27 (Unix) (Red-Hat/Linux) mod_gzip/1.3.19.1a mod_fastcgi/2.2.10 mod_jk/1.2.0 mod_perl/1.24_01 PHP/4.2.2 FrontPage/5.0.2 mod_ssl/2.8.12 OpenSSL/0.9.6b configured -- resuming normal operations
[Wed Apr 18 18:35:11 2007] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Wed Apr 18 18:35:11 2007] [notice] Accept mutex: sysvsem (Default: sysvsem)
[Wed Apr 18 18:35:11 2007] [notice] FastCGI: process manager initialized (pid 16385)
But now it looked like this:
Quote:
[Sun Apr 22 04:02:18 2007] [notice] Apache/1.3.27 (Unix) (Red-Hat/Linux) mod_gzip/1.3.19.1a configured -- resuming normal operations
[Sun Apr 22 04:02:18 2007] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Sun Apr 22 04:02:18 2007] [notice] Accept mutex: sysvsem (Default: sysvsem)
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/a1b2c3d4e5f6g7h8i9/nonexistentfile.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/adxmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/adserver/adxmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/phpAdsNew/adxmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/phpadsnew/adxmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/phpads/adxmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/Ads/adxmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/ads/adxmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/xmlrpc/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/xmlsrv/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/blog/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/drupal/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/community/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/blogs/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/blogs/xmlsrv/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/blog/xmlsrv/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/blogtest/xmlsrv/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/b2/xmlsrv/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/b2evo/xmlsrv/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/wordpress/xmlrpc.php
[Sun Apr 22 21:21:57 2007] [error] [client 209.85.60.98] File does not exist: /var/www/html/phpgroupware/xmlrpc.php
[Mon Apr 23 04:02:21 2007] [notice] SIGUSR1 received. Doing graceful restart
WTH?
I could be WAAAY off base, but my first reaction was that I'd been hacked -- someone had found a way to disable PHP so they could find sensitive information in raw PHP pages. That could be totally wrong.
At any rate, even if I never learn why Apache sometimes will compile without PHP (and some other modules) without me telling it to do so, I'd like to be prepared for an embarassment like like this.
Is there any way, say, in the .htaccess file (or anywhere, anyway), I can tell Apache not to serve **ANY** pages unless the PHP module is present?
View 4 Replies
View Related
Jun 2, 2009
We run CentOS for our web servers (not providing hosting) and manually compile Apache, PHP etc. What would be the benefits to using Yum rather than compiling the software ourselves?
The way I see it, Yum allows Apache etc to automatically update to latest versions and saves time. When compiling myself though, I can specify exactly where to install to and which modules etc to install with the software. Is there any reason we should be using Yum instead?
View 3 Replies
View Related
Jan 4, 2007
A little background on what I'm doing here...
I'm setting up a Linux machine specifically for use as a VNC here at work.
The IT Manager said he'd used Ubuntu before but left the distro up to me.
I set up my test machine with Ubuntu but need to compile Apache for portions of it to work. I've never had any problems building Apache before, but this is what I'm getting here. I have a feeling that, since I've not used Ubuntu before, that I'm just missing a step. I also noticed that the "make" command doesn't work. Does that need to be installed and compiled as well?
=========================================
root@vnc01:/etc/httpd-2.2.3# ./configure /usr/local/apache
configure: WARNING: you should use --build, --host, --target
configure: WARNING: invalid host type: /usr/local/apache
checking for chosen layout... Apache
checking for working mkdir -p... yes
checking build system type... /usr/local/apache
checking host system type... /usr/local/apache
checking target system type... /usr/local/apache
Configuring Apache Portable Runtime library ...
checking for APR... reconfig
configuring package in srclib/apr now
configure: WARNING: you should use --build, --host, --target
configure: WARNING: invalid host type: /usr/local/apache
checking build system type... /usr/local/apache
checking host system type... /usr/local/apache
checking target system type... /usr/local/apache
Configuring APR library
Platform: /usr/local/apache
checking for working mkdir -p... yes
APR Version: 1.2.7
checking for chosen layout... apr
checking for /usr/local/apache-gcc... no
checking for gcc... no
checking for /usr/local/apache-cc... no
checking for cc... no
checking for cc... no
checking for /usr/local/apache-cl... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
configure failed for srclib/apr
root@vnc01:/etc/httpd-2.2.3#
The config.log file doesn't honestly show any errors that I can see pertaining to any compile errors.
View 5 Replies
View Related
Sep 11, 2007
Recently purchased a new dedicated machine from a Savvis wholesaler, with intentions of using it as a backup server, CentOS 5.0 default install with default install of cPanel/WHM (not configured by the DC) -- Went to recompile apache with the appropriate addons and modules and this is why I get, any ideas?
Quote:
WHM 11.2.0 cPanel 11.11.0-R16948
CENTOS Enterprise 5 i686 - WHM X v3.1.0
Linux local.hostname 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 athlon i386 GNU/Linux
Quote:
Building Apache Config.....Done
Downloading and compiling apache+modules....
Fetching http://layer1.cpanel.net/buildapache.sea (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done
Verifying archive integrity... All good.
Uncompressing buildapache........................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ...........................................................................................................................................
Checking Update System........Rpm Sanity Check PASSED!
Verifying compiler and libs....Verifying installation....Kernel Headers look good!
Using newyum support...
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Excluding Packages in global exclude list
Finished
Parsing package install arguments
Nothing to do
/scripts/ensurerpm [@buildapache]...(--quiet --safe libxpm4 ImageMagick libxpm4-devel libxpm4-dev ncurses ncurses-devel ncurses-dev libncurses5 libncurses5-devel libncurses5-dev gettext gdbm gdbm-devel libgdbm2-devel libgdbm2-dev db4 db4-devel db4-dev db1 db1-devel db1-dev db1-tools patch kernel-headers linux-headers glibc-kernheaders pam-devel pam-dev krb5-devel krb5-dev openssl openssl-devel ssl-dev libssl-dev openssl-dev libopenssl0 libopenssl0-devel libopenssl0-dev flex lex bison glibc-devel glibc-dev gcc gcc-c++ libgcc cpp libstdc++ libstdc++-devel libstdc++-dev jpeg libjpeg libjpeg-devel libjpeg-dev libjpeg62 libjpeg62-devel libjpeg62-dev png libpng libpng-devel libpng-dev libpng10 libpng10-devel libpng3 libpng3-devel libpng3-dev libtiff libtiff-devel libtiff-dev libtiff3 libtiff3-devel libtiff3-dev XFree86-libs XFree86-devel XFree86-dev libopenssl0.9.7-devel libopenssl0.9.7-static-devel libltdl xorg-x11-devel pspell pspell-devel zlib zlib-devel zlib1-devel libz-devel tdl aspell aspell-devel xorg-x11-devel libc-client-devel libtool automake libungif-devel libtool-libltdl-devel libtool-ltdl-devel libltdl-devel libltdl3-devel).... . . . . . Done
Done
Done
********************************
This is buildapache version 1.5.402 (for cpanel <= 10.9.3) (ap=1.3.37)
********************************
buildapache configured from Web Host Manager
Apache configured from Web Host Manager!
Untarring expat...Fetching http://httpupdate.cpanel.net/buildap...-1.95.6.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...4%...5%...7%...8%...9%...11%...12%...14%...15%...16%...18%...19%...21%...22%...23%... 25%...26%...28%...29%...30%...32%...33%...35%...36%...37%...39%...40%...42%...43%...44%...46%...47%...49%...50%...51%...53%...54%...56%...57%...58%... 60%...61%...63%...64%...65%...67%...68%...70%...71%...72%...74%...75%...77%...78%...79%...81%...82%...84%...85%...87%...88%...89%...91%...92%...94%... 95%...96%...98%...99%...100%......Done
Done
./configure [@expat-1.95.6]...(--prefix=/usr).... . . . Done
make [@expat-1.95.6]...(-j 1).... . . . . . . . . Done
make [@expat-1.95.6]...(install).... Done
Untarring apache....
Fetching http://httpupdate.cpanel.net/buildap..._1.3.37.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done
Suexec w/php Standard Patch
patching file configure
Hunk #1 succeeded at 416 (offset 1 line).
Hunk #3 succeeded at 1317 (offset 1 line).
patching file src/main/util_script.c
Hunk #1 succeeded at 1170 (offset 1 line).
patching file src/modules/standard/mod_cgi.c
Hunk #1 succeeded at 37 (offset 1 line).
Hunk #3 succeeded at 292 (offset 1 line).
Hunk #4 succeeded at 362 with fuzz 2 (offset -7 lines).
Hunk #5 succeeded at 427 (offset 1 line).
Hunk #6 succeeded at 600 (offset -7 lines).
patching file src/support/suexec.c
Hunk #1 succeeded at 51 (offset 1 line).
Hunk #3 succeeded at 383 (offset 1 line).
Hunk #5 succeeded at 662 (offset 1 line).
patching file src/support/suexec.h
Hunk #1 succeeded at 19 (offset 1 line).
Suexec MailMan Patch
patching file src/support/suexec.c
Hunk #1 succeeded at 478 (offset 43 lines).
Fileprotect Suexec+Php Standard Patch
patching file src/support/suexec.c
Hunk #1 succeeded at 232 (offset -43 lines).
Hunk #3 succeeded at 600 (offset -43 lines).
HTTPS var Standard Patch
patching file src/support/suexec.c
Hunk #1 succeeded at 139 (offset -35 lines).
./configure [@apache_1.3.37]...(--enable-shared=max).... . . Done
patching file src/include/httpd.h
Hunk #1 succeeded at 273 (offset -43 lines).
Fetching http://httpupdate.cpanel.net/buildap...-1.3.37.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done
Untarring modssl....
patching file pkg.sslmod/libssl.module
./configure [@mod_ssl-2.8.28-1.3.37]...(--with-apache=../apache_1.3.37 --with-ssl=/usr --enable-module=expires --enable-shared=expires --add-module=../mod_frontpage.c --enable-suexecphp --enable-module=rewrite --enable-shared=rewrite --enable-suexec --suexec-logfile=/usr/local/apache/logs/suexec_log --suexec-caller=nobody --suexec-uidmin=100 --suexec-gidmin=100 --suexec-docroot=/ --suexec-userdir=public_html).... . . . . . . . . . . Done
./configure [@apache_1.3.37]...(--enable-module=ssl --enable-module=expires --enable-shared=expires --add-module=../mod_frontpage.c --enable-suexecphp --enable-module=rewrite --enable-shared=rewrite --enable-suexec --suexec-logfile=/usr/local/apache/logs/suexec_log --suexec-caller=nobody --suexec-uidmin=100 --suexec-gidmin=100 --suexec-docroot=/ --suexec-userdir=public_html).... . . . Done
make [@apache_1.3.37]...(-j 1).... . . . . . . . . . . . . Done
make [@apache_1.3.37]...(install).... Done
make[1]: *** [install-data] Error 127
make: *** [install-all] Error 2
/etc/rc.d/init.d/httpd start: httpd could not be started
Setting /home permissions to 0711......Done
Setting permissions for........Done
This script will install Postgres 7.3.x or later
If you have an older version installed you wil need to
Dump your databases to a file and then restore them
after the install as 7.3.x is not backwards compatible.
If you do not have any databases, you can just run:
mv /var/lib/pgsql /var/lib/pgsql.old
/sbin/service postgresql stop
/sbin/service postgresql start
to force creating a 7.3.x style setup. Do not do this if
you have databases that you wish to keep!
Are you sure you wish to proceed? Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Excluding Packages in global exclude list
Finished
Parsing package install arguments
Nothing to do
Stopping postgresql service: [ OK ]
Starting postgresql service: [ OK ]
You should now configure postgresql from WHM!
You should now configure postgresql from WHM!
You should now configure postgresql from WHM!
You should now configure postgresql from WHM!
Fetching http://httpupdate.cpanel.net/buildap...-2.6.22.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done
./configure [@libxml2-2.6.22]...(--prefix=/usr).... . . . . . . . . . . . . . . . . Done
make [@libxml2-2.6.22]...(-j 1).... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Done
make [@libxml2-2.6.22]...(install).... . Done
Fetching http://httpupdate.cpanel.net/buildap...-7.15.3.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done
Untarring curl......Done
./configure [@curl-7.15.3]...(--prefix=/usr).... . . . . . . . . . . . . . . . . . . . . . . . Done
make [@curl-7.15.3]...(-j 1).... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Done
make [@curl-7.15.3]...(install).... . Done
Fetching http://httpupdate.cpanel.net/buildap...p-5.2.4.tar.gz (0)....@75.126.236.226......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...12%...13%...14%...15%...16%...17%...18 %...19%...20%...21%...22%...23%...24%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...37%...38%...39%...40%...41%...42%...43 %...44%...45%...46%...47%...48%...49%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...61%...62%...63%...64%...65%...66%...67%...68 %...69%...70%...71%...72%...73%...74%...75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...86%...87%...88%...89%...90%...91%...92%...93 %...94%...95%...96%...97%...98%...99%...100%......Done
Untarring php....Done
patching file configure
Running configure:
LDFLAGS="-L/usr/X11R6/lib64" /home/cpapachebuild/buildapache/callbacklog --prog configure --dir /home/cpapachebuild/buildapache/build-log -- --with-apxs=/usr/local/apache/bin/apxs --prefix=/usr/local --with-xml --enable-bcmath --enable-calendar --with-curl --enable-ftp --with-gd --with-jpeg-dir=/usr/local --with-png-dir=/usr --with-xpm-dir=/usr/X11R6 --enable-magic-quotes --with-mysqli --with-mysql=/usr --with-openssl --enable-discard-path --with-pear --with-pgsql=/usr --enable-sockets --enable-track-vars --with-zlib
./configure [@php-5.2.4]...(--with-apxs=/usr/local/apache/bin/apxs --prefix=/usr/local --with-xml --enable-bcmath --enable-calendar --with-curl --enable-ftp --with-gd --with-jpeg-dir=/usr/local --with-png-dir=/usr --with-xpm-dir=/usr/X11R6 --enable-magic-quotes --with-mysqli --with-mysql=/usr --with-openssl --enable-discard-path --with-pear --with-pgsql=/usr --enable-sockets --enable-track-vars --with-zlib).... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Done
make [@php-5.2.4]...(-j 1 clean).... Done
make [@php-5.2.4]...(-j 1).... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Done
make [@php-5.2.4]...(install).... Done
make: *** [install-sapi] Error 1
/etc/rc.d/init.d/httpd start: httpd could not be started
./configure [@php-5.2.4]...(--prefix=/usr --with-xml --enable-bcmath --enable-calendar --with-curl --enable-ftp --with-gd --with-jpeg-dir=/usr/local --with-png-dir=/usr --with-xpm-dir=/usr/X11R6 --enable-magic-quotes --with-mysqli --with-mysql=/usr --with-openssl --enable-discard-path --with-pear --with-pgsql=/usr --enable-sockets --enable-track-vars --with-zlib).... . . . . . . . . . . . . . Done
make [@php-5.2.4]...(-j 1 clean).... Done
make [@php-5.2.4]...(-j 1).... . . . . . . . . . . Done
make [@php-5.2.4]...(install).... . . . . . . . . . Done
initfpsuexec: using apache 1.x support
PHP version file has been updated to
./build all
./build install
initfpsuexec: using apache 1.x support
Attempting to restart httpd
Waiting for httpd to restart....
etc etc failed..
Furthermore httpd.conf in /usr/local/apache/conf only contains the following;
Quote:
ErrorDocument 400 /400.shtml
ErrorDocument 401 /401.shtml
ErrorDocument 403 /403.shtml
ErrorDocument 404 /404.shtml
ErrorDocument 500 /500.shtml
ScriptAlias /cgi-sys/ /usr/local/cpanel/cgi-sys/
Alias /bandwidth/ /usr/local/bandmin/htdocs/
Alias /sys_cpanel/ /usr/local/cpanel/sys_cpanel/
Alias /java-sys/ /usr/local/cpanel/java-sys/
Alias /img-sys/ /usr/local/cpanel/img-sys/
Alias /akopia/ /usr/local/cpanel/3rdparty/interchange/share/akopia/
Alias /neo-images/ /usr/local/cpanel/base/neomail/neo-images/
ScriptAliasMatch ^/cpanel/(.*) /usr/local/cpanel/cgi-sys/redirect.cgi
ScriptAlias /cpanel /usr/local/cpanel/cgi-sys/redirect.cgi
ScriptAlias /whm /usr/local/cpanel/cgi-sys/whmredirect.cgi
ScriptAlias /securewhm /usr/local/cpanel/cgi-sys/swhmredirect.cgi
ScriptAlias /webmail /usr/local/cpanel/cgi-sys/wredirect.cgi
ScriptAliasMatch ^/webmail/(.*) /usr/local/cpanel/cgi-sys/wredirect.cgi
ScriptAliasMatch ^/kpanel/(.*) /usr/local/cpanel/cgi-sys/redirect.cgi
ScriptAlias /controlpanel /usr/local/cpanel/cgi-sys/redirect.cgi
ScriptAlias /securecontrolpanel /usr/local/cpanel/cgi-sys/sredirect.cgi
Alias /mailman/archives/ /usr/local/cpanel/3rdparty/mailman/archives/public/
ScriptAlias /mailman/ /usr/local/cpanel/3rdparty/mailman/cgi-bin/
Alias /pipermail/ /usr/local/cpanel/3rdparty/mailman/archives/public/
Alias /interchange/ /usr/local/cpanel/3rdparty/interchange/share/interchange/
Alias /interchange-5/ /usr/local/cpanel/3rdparty/interchange/share/interchange-5/
Even tried removing /usr/local/apache then running easyapache, but no such luck as it replaces the config with the same thing.
View 10 Replies
View Related
Feb 1, 2007
Does anyone know the step by step procedure for compiling apache with phpsuexec enabled and making apache recognize php on a non-cpanel server?
View 0 Replies
View Related
Sep 30, 2006
I'm trying to install Clamav on my Centos box (64bit version) but on the Make command I get the following error:
/usr/local/lib/libz.a(gzio.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC
/usr/local/lib/libz.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
make[2]: *** [libclamav.la] Error 1
make[2]: Leaving directory `/root/clamav-0.88/libclamav'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/root/clamav-0.88'
make: *** [all] Error 2
I'm guessing is something to do with X86_64 but I still can't find a solution to this.
View 2 Replies
View Related
Feb 15, 2008
I'd like to give my username on my server permission to access g++ to compile custom C++ programs. I know I can just su - and compile as root, but I really don't like that.
What do I need to do to allow ONLY my username permission to do that?
View 4 Replies
View Related
May 13, 2007
I am trying to install the kernel source.
I have downloaded kernel-2.6.20-1.2948.fc6.src.rpm
I am using fedora 6 64bit.
here are my current kernels:
kernel-headers-2.6.20-1.2948.fc6
kernel-devel-2.6.20-1.2944.fc6
yum-kernel-module-1.0.3-1.fc6
kernel-2.6.20-1.2944.fc6
kernel-devel-2.6.20-1.2948.fc6
kernel-2.6.20-1.2948.fc6
here is what I seen when I installed kernel-2.6.20-1.2948.fc6.src.rpm
rpm -ivh kernel-2.6.20-1.2948.fc6.src.rpm
1:kernel warning: user brewbuilder does not exist - using root
warning: group brewbuilder does not exist - using root
warning: user brewbuilder does not exist - using root
########################################### [100%]
warning: user brewbuilder does not exist - using root
warning: group brewbuilder does not exist - using root
then when I ran:
rpmbuild -bp --target=$(uname -m) /usr/src/redhat/SPECS/kernel-2.6.spec
I seen this error:
+ Arch=x86_64
+ make ARCH=x86_64 nonint_oldconfig
In file included from /usr/include/sys/socket.h:35,
from /usr/include/netinet/in.h:24,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/bits/socket.h:310:24: error: asm/socket.h: No such file or directory
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.93770 (%prep)
I need to have this installed to get a app installed etc...
suggestions or ideas?
thanks
View 2 Replies
View Related
Aug 6, 2008
I am trying to install dedicated web server on my Slackware 12.0.0 machine. I am a novice in Linux, but succeeded in MySQL & proFTPd installation. The problem now in httpd compiling.
I downloaded the latest Apache 2.2.9, but it needs Apache Portable Runtime 1.3.2 installed. I downloaded 1.3.2 version and run ./configure
1. checking size of size_t... 4
2. checking which format to use for apr_size_t... %u
3. checking size of off_t... 4
4. checking for mmap64... yes
5. checking for sendfile64... yes
6. checking for sendfilev64... no
7. checking for mkstemp64... yes
8. checking for readdir64_r... yes
9. checking which type to use for apr_off_t... off64_t
10. checking whether ino_t and unsigned long are the same... yes
11. configure: using unsigned long for ino_t
12. checking size of pid_t... 4
13. checking whether byte ordering is bigendian... no
14. checking size of struct iovec... 8
15. checking for strnicmp... no
16. checking for strncasecmp... yes
17. checking for stricmp... no
18. checking for strcasecmp... yes
19. checking for strdup... yes
20. checking for strstr... yes
21. checking for memchr... yes
22. checking for strtoll... yes
23.
24. Checking for DSO...
25. checking for dlopen... no
26. checking for dlopen in -ldl... yes
27. adding "-ldl" to LIBS
28. checking for dlsym... yes
29.
30. Checking for Processes...
31. checking for waitpid... yes
32. checking for Variable Length Arrays... yes
33. checking struct rlimit... yes
34.
35. Checking for Locking...
36. checking for semget... yes
37. checking for semctl... yes
38. checking for flock... yes
39. checking for semaphore.h... (cached) yes
40. checking OS.h usability... no
41. checking OS.h presence... no
42. checking for OS.h... no
43. checking for library containing sem_open... none required
44. checking for sem_close... yes
45. checking for sem_unlink... yes
46. checking for sem_post... yes
47. checking for sem_wait... yes
48. checking for create_sem... no
49. checking for working sem_open... yes
50. checking for union semun in sys/sem.h... no
51. checking for LOCK_EX in sys/file.h... yes
52. checking for F_SETLK in fcntl.h... yes
53. checking for SEM_UNDO in sys/sem.h... yes
54. checking for POLLIN in poll.h sys/poll.h... yes
55. checking for PTHREAD_PROCESS_SHARED in pthread.h... yes
56. checking for pthread_mutexattr_setpshared... yes
57. checking for working PROCESS_SHARED locks... yes
58. checking for robust cross-process mutex support... yes
59. decision on apr_lock implementation method... SysV IPC semget()
60. checking if all interprocess locks affect threads... no
61. checking if POSIX sems affect threads in the same process... no
62. checking if SysV sems affect threads in the same process... no
63. checking if fcntl locks affect threads in the same process... no
64. checking if flock locks affect threads in the same process... no
65. checking for entropy source... /dev/urandom
66.
67. Checking for File Info Support...
68. checking for struct stat.st_blocks... yes
69. checking for struct stat.st_atimensec... no
70. checking for struct stat.st_ctimensec... no
71. checking for struct stat.st_mtimensec... no
72. checking for struct stat.st_atim.tv_nsec... yes
73. checking for struct stat.st_ctim.tv_nsec... yes
74. checking for struct stat.st_mtim.tv_nsec... yes
75. checking for struct stat.st_atime_n... no
76. checking for struct stat.st_ctime_n... no
77. checking for struct stat.st_mtime_n... no
78. checking for inode member of struct dirent... d_fileno
79. checking for file type member of struct dirent... d_type
80.
81. Checking for OS UUID Support...
82. checking uuid.h usability... no
83. checking uuid.h presence... no
84. checking for uuid.h... no
85. checking uuid/uuid.h usability... yes
86. checking uuid/uuid.h presence... yes
87. checking for uuid/uuid.h... yes
88. checking for library containing uuid_create... no
89. checking for library containing uuid_generate... -luuid
90. checking for uuid_create... no
91. checking for uuid_generate... yes
92. checking for os uuid usability... yes
93.
94. Checking for Time Support...
95. checking for struct tm.tm_gmtoff... yes
96. checking for struct tm.__tm_gmtoff... no
97.
98. Checking for Networking support...
99. checking for type in_addr... yes
100. checking if fd == socket on this platform... yes
101. checking style of gethostbyname_r routine... glibc2
102. checking 3rd argument to the gethostbyname_r routines... char
103. checking style of getservbyname_r routine... glibc2
104. checking if TCP_NODELAY setting is inherited from listening sockets... yes
105. checking if O_NONBLOCK setting is inherited from listening sockets... no
106. checking whether TCP_NODELAY and TCP_CORK can both be enabled... yes
107. checking for TCP_CORK in netinet/tcp.h... yes
108. checking for TCP_NOPUSH in netinet/tcp.h... no
109. checking for SO_ACCEPTFILTER in sys/socket.h... no
110. checking whether SCTP is supported... no
111. checking for struct ip_mreq... yes
112. checking for set_h_errno... no
113.
114. Checking for IPv6 Networking support...
115. checking for library containing getaddrinfo... none required
116. checking for library containing gai_strerror... none required
117. checking for library containing getnameinfo... none required
118. checking for gai_strerror... yes
119. checking for working getaddrinfo... yes
120. checking for negative error codes for getaddrinfo... yes
121. checking for working getnameinfo... yes
122. checking for sockaddr_in6... yes
123. checking for sockaddr_storage... yes
124. checking for working AI_ADDRCONFIG... yes
125. checking if APR supports IPv6... yes
126. checking langinfo.h usability... yes
127. checking langinfo.h presence... yes
128. checking for langinfo.h... yes
129. checking for nl_langinfo... yes
130.
131. Restore user-defined environment settings...
132. restoring CPPFLAGS to ""
133. setting EXTRA_CPPFLAGS to "-DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -D_LARGEFILE64_SOURCE"
134. restoring CFLAGS to ""
135. setting EXTRA_CFLAGS to "-g -O2 -pthread"
136. restoring LDFLAGS to ""
137. setting EXTRA_LDFLAGS to ""
138. restoring LIBS to ""
139. setting EXTRA_LIBS to "-luuid -lrt -lcrypt -lpthread -ldl"
140. restoring INCLUDES to ""
141. setting EXTRA_INCLUDES to ""
142. configure: creating ./config.status
143. config.status: creating Makefile
144. config.status: creating include/apr.h
145. config.status: creating build/apr_rules.mk
146. config.status: creating build/pkg/pkginfo
147. config.status: creating apr--config
148. config.status: WARNING: 'apr-config.in' seems to ignore the --datarootdir setting
149. config.status: creating apr.pc
150. config.status: creating test/Makefile
151. config.status: creating test/internal/Makefile
152. config.status: creating include/arch/unix/apr_private.h
153. config.status: executing default commands
154. config.status: include/apr.h is unchanged
155. config.status: include/arch/unix/apr_private.h is unchanged
After that I am trying make and have error at the end:
make[1]: Entering directory `/root/build/apr-1.3.2'
/bin/sh /root/build/apr-1.3.2/libtool --silent --mode=link gcc -g -O2 -pthread -DHAVE_CONFIG_H -DLINUX=2 -D_REENTRANT -D_GNU_SOURCE -.....
View 0 Replies
View Related
Apr 4, 2009
I have a Xen VPS. I started with a Debian 4 image and have since upgraded to Debian 5. Firstly was this advisable? Secondly what Kernel version should I be running, or rather is it set by my installation or by the Xen server?
View 3 Replies
View Related
Feb 15, 2007
Does it take 2 hours to have a new kernel up and running? The tech is taking forever to finish.
View 11 Replies
View Related
Apr 24, 2009
as part of a project I have lately been looking into various aspects of kernel tuning. Most notably lately tuning the TCP stack for more efficient memory usage/throughput.
Thought I would start this thread to mention some of the tools I'd found for doing testing and see what anyone else had to recommend.
So far my favorite of the bunch is nuttcp. Its easy to use and gives a very good idea of how much of your bandwidth you are able to utilize.
A few interesting web pages are as follows for anyone interested in the topic:
[url]- Tuning TCP for High Bandwidth Delay networks
[url]- TCP Tuning Cook book, some interesting information in there as well
[url]...formanceTuning - Performance Tuning TWiki. Has a list of useful tools, flags for existing tools and ways to monitor network performance from a system level, along with some suggestions of things to correct
View 0 Replies
View Related
