I have a dedicated linux server and i want to install zimbra(open source mail server) on my server,i have googled and install it but it doesn't work..i can't login in to admin panel [url]but it throws page load error.
View 4 Replies
am going to make site for free emails for users
i saw zimbra software it's awesome
i wanna get offers for vps but i want the vps provider to install zimbra software for me and configure it
and i will pay for the installation of zimbra
I am wanting to know if a VPS would be able to run Zimbra Open Source?
I am currently searching for something around $50.00 to do so per month, preferably cheaper. This is to host a nonprofit website and their email/collaboration system.
I have been struggling for the last 24 hours with setup of Zimbra on a VPS environment with 1gb dedicated RAM. In all cases, after the standard installation pains, I was able to get the actual interface up and running just fine. It allows the admin to log in to both admin and the client interface, however no messages can successfully be sent.
I am unaware what the root cause of my problem is at this point, so kindly require further assistance. I am pretty sure there are no conflicts at this point as most all other services have been disabled, as this is a box dedicated for Zimbra, and the standard HTTP has been set to 88. I can access the site just fine at port 88 but sending mail, even to the local admin account that was set up during installation (the only email accont set up on this box) results in an error message after 8 seconds that reads:
-----
A network error has occurred.
msg - csfe service error
code - NETWORK_ERROR
method - ZmCsfeCommand.prototype.invoke
detail - Empty HTTP response
-----
From shell, I see that messages are being sent to the administrator, as it notifies me. They read:
From zimbra@cleo.ewebzone.net Wed May 9 06:40:05 2007
Date: Wed, 9 May 2007 06:40:02 -0500
From: root@cleo.ewebzone.net (Cron Daemon)
To: zimbra@cleo.ewebzone.net
Subject: Cron <zimbra@cleo> /opt/zimbra/libexec/zmqueuelog
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/opt/zimbra>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=zimbra>
postqueue: fatal: Queue report unavailable - mail system is down
---------
From zimbra@cleo.ewebzone.net Wed May 9 06:24:03 2007
Date: Wed, 9 May 2007 06:24:02 -0500
From: root@cleo.ewebzone.net (Cron Daemon)
To: zimbra@cleo.ewebzone.net
Subject: Cron <zimbra@cleo> /opt/zimbra/libexec/zmstatuslog
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/opt/zimbra>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=zimbra>
Could not create the Java virtual machine.
----------
I do believe tomcat is running and is just fine, however. I am able to access the Zimbra interface just fine, can restart tomcat without error, and see intensive java usage in top (which looks normal).
I am most familiar with CentOS and intended on using this distribution, however had no success. I then switched to Ubuntu install. It appears things installed much smoother, but I'm having the same problem.
A records for cleo.ewebzone.net have bee propertly set, as have a mx record on the authorative DNS server for the root domain, ewebzone.net. The name of my zimbra box is obviously cleo.ewebzone.net.
I want to install CentOS 5 on my VPS and my current template's don't have it. How do i do this? Or better still, if you have a template pre-made,
View 8 Replies View RelatedI have installed Xen on my CentOS ded box, and now I'm trying to install a Guest OS, also CentOS using the following command:
Code:
virt-install -p --prompt -n CentOS2 -r 512 --file=/vm/centos.img --file-size=15 -l [url]
Now everything starts, I come to the network screen (right after the language selection), leave everything on default, it says it is trying to configure the network with DHCP for eth0 and then hangs there for a moment a does nothing.
How do I continue, how do I configure the network correcly.
I am just starting to learn Xen and would appreciate all the input I get.
I tried to install clamav, but i'm out of luck. It won't install at all. it gives the folloing error:
Transaction Check Error:
file /etc/freshclam.conf from install of clamav-0.95.1-4.el5.rf.i386 conflicts with file from package clamav-toaster-0.95.1-1.3.27.i386 ....
i have a 32bit centos running with 8 gigs, but only 7 is registering when i contacted support they told me
Your server does in fact have 8GB of physical memory however the reason it is not being recognized is due to the fact that you are using a 32 bit operating system. By default, the 8GB would be recognized if it were a 64 bit OS however on a 32 bit operating system, you must install and boot into the PAE kernel (physical address extension) for the 8GB to be recognized and utilized. The PAE kernel can be installed through yum when connected to your server as root over SSH. Once you have installed the kernel, you will need to reboot the server for these changes to take effect
i tried
yum pae install
yum pae kernel install
both didnt work can anyone give me a quick step by step guide on how to go about this.
I try more time noting
root@serv01 [/opt]# ./j2eesdk-1_4_03-linux.bin
Checking available disk space...
Checking Java(TM) 2 Runtime Environment...
Extracting Java(TM) 2 Runtime Environment files...
Extracting installation files...
Launching Java(TM) 2 Runtime Environment...
Error: The Java(TM) Virtual Machine has aborted.
Deleting temporary files...
Deleting temporary files...
how can install java because i need to it
I finally got my hands on a test server and am playing with Centos.
I got it installed but am not sure where to go from here in regards to getting it setup for web server use.
Is there any documentation on what to install for web server use? Is there a cheat sheet out there I can follow?
Been fooling around with red5 too long now. I really need this app to work so I can use the audio/video option on my chat.
I'm willing to pay the person who can make red5 work on my linux centos server. I allready installed ant & red5, the java is just a bit to tricky for me.
Like I said, I'm willing to pay a fee for the person who can make the red5 work.
im going to be installing centos 5.1 on a webserver. which packages should i install. ie when it gives the the options for kde knome server server with gui etc?
View 6 Replies View RelatedI am using apachetop and it says in order to resolve host names (-r flag), adns must be installed. Host names aren't being resolved, so it appears I don't have adns, and I have googled but can't figure out where to get it and how to install it.
View 2 Replies View Relatedi run cd home
wget -q [url] sh latest
but give me error
error: [url] : import read failed.
Your operating system's rpm update method (yum) was not able to locate the glibc package. This is an indication of an improper setup. You must correct this error before you can proceed.
i reinstalled my vps that is virtuozzo
how may i install os(centos)?
I downloaded the latest 3dm2 software:
wget [url]
However, after extracting it, when I run the setup (./setupLinux_x64.bin -console) I get "Bundled JRE is not binary compatible with host OS/Arch or it is corrupt. Testing bundled JRE failed."
Can anyone give me the steps for installing 3dm2 on a centos/WHM box?
The card is a 3ware 9690SA.
to install the complete FFMPEG package onto my VPS which includes, FFMPEG, Mplayer, Mencoder, Lame, etc.
I generally use the following script which works as a charm, but doesn't work very well on CentOS 64-Bit.
Other manual install Zabbix on CentOS 5.
Zabbix for used a vps, this is a problem?
I'm planning to rent a Dedicated Server soon, but before I would like to deploy my application to a VMWare appliance on my local machine.
The OS that i'm planning to use is CentOS 5.1
Does anyone knows how the dedicated server's on hosting companies are customized or installed?
I'm installing in on my machine, but there are many options to select.
For example, I did not installed the GUI, just to mirror my a server setup.
Any idea how is the best way to mirror a dedicated server installation, for learning purposes?
how to install mod_top on a Cpanel / Centos box?
[url]
This does not work (gives off errors such as file or dir not found)
i downloaded [url]
and
[url]
from [url]
but how may i install it?
i read readme but ...
I have been trying to get mod_rewrite to work on my CentOS server running the BQ.
Now what i need is to be allowed to use .htaccess files to use mod rewrite to allow me to use SEO urls.
Anyone know what needs to be done on CentOs, to be able to do it?
I have done the only instruction on Centos about it:
Quote:
# vi /etc/httpd/conf/httpd.conf
FIND SECTION BEGINNING
<Directory "/var/www/html">
Options Indexes FollowSymLinks
AND CHANGE
AllowOverride None
TO
AllowOverride All
Order allow,deny
Allow from all
</Directory>
SAVE FILE AND THEN
# service httpd restart
Although i still get the "500 Internal Server Error" message.
with installing PHP5 on CentOS? I tried this:
Quote:
$ yum --enablerepo=centosplus --exclude=php-domxml install php*
Setting up Install Process
Setting up repositories
Reading repository metadata in from local files
Excluding Packages in global exclude list
Finished
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Package php-pear-Cache.noarch 0:1.5.5-0.1.RC4.el4.centos set to be updated
---> Package php-odbc.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-Net-Curl.noarch 0:1.2.3-2.el4.centos set to be updated
---> Package php-mhash.x86_64 0:5.1.6-1.el4.centos set to be updated
---> Package php-dbase.x86_64 0:5.1.6-1.el4.centos set to be updated
---> Package php-mysql.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-gd.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-XML-Beautifier.noarch 0:1.1-1.el4.centos set to be updated
---> Package php-mcrypt.x86_64 0:5.1.6-1.el4.centos set to be updated
---> Package php-pear-HTTP.noarch 0:1.4.0-7.el4.centos set to be updated
---> Package php-xml.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-XML-Serializer.noarch 0:0.18.0-2.el4.centos set to be updated
---> Package php-pecl-apc.x86_64 0:3.0.12-1.el4.centos set to be updated
---> Package php-pear-Validate-Finance-CreditCard.noarch 0:0.5.2-1.el4.centos set to be updated
---> Package php-pear-Date.noarch 0:1.4.6-1.el4.centos set to be updated
---> Package php-pear-XML-Parser.noarch 0:1.2.7-4.el4.centos set to be updated
---> Package php-soap.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-Net-Socket.noarch 0:1.0.6-5.el4.centos set to be updated
---> Package php-pear-XML-Util.noarch 0:1.1.1-1.el4.centos set to be updated
---> Package php-pgsql.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-MDB2.noarch 0:2.2.2-2.el4.centos set to be updated
---> Package php-eaccelerator.x86_64 0:5.1.6_0.9.5-1.el4.centos set to be updated
---> Package php-pear-PHP-Compat.noarch 0:1.5.0-1.el4.centos.1 set to be updated
---> Package php-pear-HTTP-Request.noarch 0:1.4.0-1.el4.centos set to be updated
---> Package php-pecl-mailparse.x86_64 0:2.1.1-4.el4.centos set to be updated
---> Package php-pear-XML-RSS.noarch 0:0.9.10-2.el4.centos set to be updated
---> Package php-dba.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-common.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-ncurses.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-HTML-Table.noarch 0:1.7.5-1.el4.centos set to be updated
---> Package php.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-DB.noarch 0:1.7.6-6.el4.centos set to be updated
---> Package php-pear-Mail-Mime.noarch 0:1.3.1-8.el4.centos set to be updated
---> Package php-pear-Auth-SASL.noarch 0:1.0.2-4.el4.centos set to be updated
---> Package php-pear-Mail.noarch 0:1.1.14-1.el4.centos set to be updated
---> Package php-pear-PHPUnit.noarch 0:1.3.2-1.el4.centos.1 set to be updated
---> Package php-pear-Net-URL.noarch 0:1.0.14-1.el4.centos set to be updated
---> Package php-pear-Console-Table.noarch 0:1.0.5-2.el4.centos.1 set to be updated
---> Package php-pear-Net-DIME.noarch 0:0.3-1.el4.centos set to be updated
---> Package php-pear-Pager.noarch 0:2.4.2-1.el4.centos set to be updated
---> Package php-pdo.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-Log.noarch 0:1.9.9-1.el4.centos set to be updated
---> Package php-bcmath.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-Benchmark.noarch 0:1.2.6-1.el4.centos set to be updated
---> Package php-snmp.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-Net-SMTP.noarch 0:1.2.8-5.el4.centos set to be updated
---> Package php-pear.noarch 1:1.4.11-1.el4s1.1 set to be updated
---> Package php-xmlrpc.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-DB-QueryTool.noarch 0:1.0.3-1.el4.centos set to be updated
---> Package php-pear-PHPUnit2.noarch 0:2.3.6-1.el4.centos set to be updated
---> Package php-devel.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-mbstring.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-Payment-Process.noarch 0:0.6.5-1.el4.centos set to be updated
---> Package php-pear-Net-FTP.noarch 0:1.3.2-1.el4.centos set to be updated
---> Package php-pear.x86_64 0:4.3.9-3.22.5 set to be updated
---> Package php-cli.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-readline.x86_64 0:5.1.6-1.el4.centos set to be updated
---> Package php-pear-Console-Getargs.noarch 0:1.3.3-1.el4.centos set to be updated
---> Package php-imap.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pecl-zip.x86_64 0:1.8.0-1.el4.centos set to be updated
---> Package php-pear-Validate.noarch 0:0.6.4-1.el4.centos set to be updated
---> Package php-pear-Date-Holidays.noarch 0:0.16.1-1.el4.centos set to be updated
---> Package php-pear-HTML-Common.noarch 0:1.2.3-2.el4.centos set to be updated
---> Package php-pear-PHP-CompatInfo.noarch 0:1.4.0-1.el4.centos set to be updated
---> Package php-ldap.x86_64 0:5.1.6-3.el4s1.7 set to be updated
---> Package php-pear-Image-GraphViz.noarch 0:1.2.1-1.el4.centos set to be updated
---> Package php-tidy.x86_64 0:5.1.6-1.el4.centos set to be updated
--> Running transaction check
--> Processing Conflict: php-pecl-apc conflicts php-eaccelerator
--> Processing Dependency: autoconf for package: php-devel
--> Processing Dependency: libexslt.so.0()(64bit) for package: php-xml
--> Processing Dependency: libmcrypt.so.4()(64bit) for package: php-mcrypt
--> Processing Dependency: php-pecl(Xdebug) for package: php-pear-PHPUnit2
--> Processing Dependency: graphviz for package: php-pear-Image-GraphViz
--> Processing Dependency: libmhash.so.2()(64bit) for package: php-mhash
--> Processing Dependency: net-snmp for package: php-snmp
--> Processing Dependency: libpq.so.4()(64bit) for package: php-pgsql
--> Processing Dependency: libltdl.so.3()(64bit) for package: php-mcrypt
--> Processing Dependency: libmysqlclient.so.15()(64bit) for package: php-mysql
--> Processing Dependency: php = 4.3.9-3.22.5 for package: php-pear
--> Processing Dependency: libmysqlclient.so.15(libmysqlclient_15)(64bit) for package: php-mysql
--> Processing Dependency: automake for package: php-devel
--> Processing Dependency: libnetsnmp.so.5()(64bit) for package: php-snmp
--> Processing Dependency: libtidy-0.99.so.0()(64bit) for package: php-tidy
--> Processing Dependency: libxslt.so.1()(64bit) for package: php-xml
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
---> Package libtidy.x86_64 0:0.99.0-9.20051025.el4.centos.3 set to be updated
---> Package postgresql-libs.x86_64 0:8.1.9-1.el4s1.1 set to be updated
---> Package net-snmp-libs.x86_64 0:5.1.2-11.EL4.10 set to be updated
---> Package libxslt.x86_64 0:1.1.11-1 set to be updated
---> Package libtool-libs.x86_64 0:1.5.6-4.EL4.1.c4.4 set to be updated
---> Package autoconf.noarch 0:2.59-5 set to be updated
---> Package automake.noarch 0:1.9.2-3 set to be updated
---> Package mysql.x86_64 0:5.0.27-1.el4.centos set to be updated
---> Package net-snmp.x86_64 0:5.1.2-11.EL4.10 set to be updated
---> Package libmcrypt.x86_64 0:2.5.7-4.el4.centos set to be updated
---> Package mhash.x86_64 0:0.9.2-4 set to be updated
--> Running transaction check
--> Processing Conflict: php-pecl-apc conflicts php-eaccelerator
--> Processing Dependency: libgpg-error.so.0()(64bit) for package: libxslt
--> Processing Dependency: php-pecl(Xdebug) for package: php-pear-PHPUnit2
--> Processing Dependency: libgcrypt.so.11()(64bit) for package: libxslt
--> Processing Dependency: graphviz for package: php-pear-Image-GraphViz
--> Processing Dependency: libmysqlclient.so.14(libmysqlclient_14)(64bit) for package: mysql-server
--> Processing Dependency: mysql = 4.1.20-2.RHEL4.1 for package: mysql-server
--> Processing Dependency: libpq.so.3()(64bit) for package: dovecot
--> Processing Dependency: libmysqlclient.so.14()(64bit) for package: mysql-server
--> Processing Dependency: libmysqlclient_r.so.14()(64bit) for package: mysql-server
--> Processing Dependency: php = 4.3.9-3.22.5 for package: php-pear
--> Processing Dependency: mysql = 4.1.20-2.RHEL4.1 for package: mysql-devel
--> Processing Dependency: libmysqlclient.so.14()(64bit) for package: perl-DBD-MySQL
--> Processing Dependency: libmysqlclient_r.so.14(libmysqlclient_14)(64bit) for package: mysql-server
--> Processing Dependency: libmysqlclient.so.14(libmysqlclient_14)(64bit) for package: dovecot
--> Processing Dependency: libmysqlclient.so.14()(64bit) for package: dovecot
--> Processing Dependency: m4 for package: autoconf
--> Processing Dependency: libsensors.so.3()(64bit) for package: net-snmp
--> Processing Dependency: libgcrypt.so.11(GCRYPT_1.2)(64bit) for package: libxslt
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
---> Package mysqlclient14.x86_64 0:4.1.22-1.el4s1.1 set to be updated
---> Package postgresqlclient7.x86_64 0:7.4.14-1.el4s1.1.el4.centos set to be updated
---> Package mysql-server.x86_64 0:5.0.27-1.el4.centos set to be updated
---> Package m4.x86_64 0:1.4.1-16 set to be updated
---> Package lm_sensors.x86_64 0:2.8.7-2.40.3 set to be updated
---> Package libgcrypt.x86_64 0:1.2.0-3 set to be updated
---> Package mysql-devel.x86_64 0:5.0.27-1.el4.centos set to be updated
---> Package perl-DBD-MySQL.x86_64 0:3.0008-1.el4.centos set to be updated
---> Package libgpg-error.x86_64 0:1.0-1 set to be updated
--> Running transaction check
--> Processing Conflict: php-pecl-apc conflicts php-eaccelerator
--> Processing Dependency: php-pecl(Xdebug) for package: php-pear-PHPUnit2
--> Processing Dependency: graphviz for package: php-pear-Image-GraphViz
--> Processing Dependency: perl(:MODULE_COMPAT_5.8.8) for package: perl-DBD-MySQL
--> Processing Dependency: php = 4.3.9-3.22.5 for package: php-pear
--> Processing Dependency: kernel-utils for package: lm_sensors
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
---> Package kernel-utils.x86_64 1:2.4-13.1.99 set to be updated
---> Package perl.x86_64 4:5.8.8-4.el4s1 set to be updated
--> Running transaction check
--> Processing Conflict: php-pecl-apc conflicts php-eaccelerator
--> Processing Dependency: graphviz for package: php-pear-Image-GraphViz
--> Processing Dependency: php = 4.3.9-3.22.5 for package: php-pear
--> Processing Dependency: php-pecl(Xdebug) for package: php-pear-PHPUnit2
--> Finished Dependency Resolution
Error: php-pecl-apc conflicts with php-eaccelerator
Error: Missing Dependency: php-pecl(Xdebug) is needed by package php-pear-PHPUnit2
Error: Missing Dependency: graphviz is needed by package php-pear-Image-GraphViz
Error: Missing Dependency: php = 4.3.9-3.22.5 is needed by package php-pear
Anyone know how to resolve these dependencies?
I want to make vpn server beside hosting server .
how can i install openvpn in centos server?
I've bought an VPS recently but now I have a problem. It didn't come with yum installed so I need to install it on my own...
Now, I have a problem.
When I try to do:
Code:
# rpm -Uvh yum-3.2.19-18.el5.centos.noarch.rpm
This comes out:
Code:
warning: yum-3.2.19-18.el5.centos.noarch.rpm: Header V3 DSA signature: N
OKEY, key ID e8562897
error: Failed dependencies:
yum-fastestmirror is needed by yum-3.2.19-18.el5.centos.noarch
So I suppose I need to install the yum-fastestmirror first.
But when I try:
Code:
# rpm -Uvh yum-fastestmirror-1.1.16-13.el5.centos.noarch.
rpm
This comes out:
Code:
warning: yum-fastestmirror-1.1.16-13.el5.centos.noarch.rpm: Header V3 DS
A signature: NOKEY, key ID e8562897
error: Failed dependencies:
yum >= 3.0 is needed by yum-fastestmirror-1.1.16-13.el5.centos.n
manually install Windows 2003 std to a linux box ( CentOS 5.2 to be exact). The reason is my provider does not provide Windows or custom OS installation.
View 9 Replies View Relatedjust installed CentOS 5.2 and got this error
error while loading shared libraries: libgcc_s.so.1: cannot open shared object file: No such file or directory
then, i tried to search libgcc_s.so.1
[root@server]# find /usr -name libgcc_s.so.1
nothing found.
how to fix this error..
I found htop much more easier to understand than top and would like to install it on my cPanel CentOS server. I tried executing following command from root shell:
yum install htop
and got following output:
..................Reading repository metadata in from local files
Excluding Packages in global exclude list
Finished
Parsing package install arguments
No Match for argument: htop
Nothing to do
Not sure if htop is available for CentOS cpanel servers? If so how can I install it?
I have probably what is the most simple thing I'm going to have to do soon, but I have never done it so I'm looking for tips of how to do it because I dont want to screw it up.
I want to copy a CentOS install from one RAID array, to another. However, I have a drive image (27GB RAID array) of the old RAID array, but the new RAID array will be larger.
How can I copy the old CentOS install, to a new array?
Is it possible to Remotely Install Centos on a dedicated server?
View 5 Replies View Related
