We are rotating apache logs 4 times during the day, we are using apache graceful as part of the script so it will generate all new log files.But I recently found it is killing/closing the active connection for ex: If I am downloading a large file, it fails during the apache graceful restart.
View 4 RepliesAfter a graceful reboot I am having problems with a few things.
First cpsrvd and lfd failed to start, but I fixed it doing this:
rm -f /usr/local/cpanel/cpanel
rm -f /scripts/installgd
rm -f /scripts/cleanmd5
rm -f /scripts/upcp
But next to all the drives it says "No DMA! (Click to Enable)", I click that and it says things:
Quote:
EIDE Hard Drive Optimizations Enabled
/dev/hdc:
setting 32-bit IO_support flag to 1
IO_support = 1 (32-bit)
But after going back to Service Status it still says that.
So I tried to enable it through a command by typing:
sudo hparm -d1 /dev/hdc5
And get this error:
Quote:
/dev/hdc5:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Invalid argument
using_dma = 0 (off)
I am checking WHM apache status and I am seeing roughly 72+ connection from 127.0.0.1 (server), why? What could be the problem? Is the server hanging up or is this an indication that something is broken in the server?
View 2 Replies View RelatedServer down after start apache! Too many connection!
When im start apache on server, its crashed.
I am see following error, in access log:
Where is issue and how can fix it?
-bash-3.1# tail -f /var/log/httpd/access_log
::1 - - [16/Nov/2008:20:54:23 +0330] "GET / HTTP/1.0" 403 5043 "-" "Apache/2.2.3 (CentOS) (internal dummy connection)"
::1 - - [16/Nov/2008:20:54:24 +0330] "GET / HTTP/1.0" 403 5043 "-" "Apache/2.2.3 (CentOS) (internal dummy connection)" ....
As far as I know.. It seems that my web server is connecting to another IP (84.20.6.132).. it have lot of lines like this: ....
View 5 Replies View RelatedHow can i remove "Connection and keep-alive" from response headers ? I am using Apache http server to load balance two tomcat nodes
Apache Server- Apache/2.4.2
mod_jk - 1.2.27
Apache tomcat - Apache Tomcat/7.0.23
JDK - 1.6
I have also enabled SSL in the apache http server using mod_ssl. The load balancing works fine, but in all the response headers these connection attributes are added "Connection: keep-alive keep-alive: timeout=5"
Is there a way to remove these headers? I do not want these headers to be added in the response. I have also tried mod_header to unset these headers, but no use. HTTP/1.1 protocol is being used, so eventhough the connection is not present in the header, the connection would should be considered as persistent. Why is apache sending these attributes explicitly in each response. I just want to get rid of these attribute...
We are hosting a Git server (using Gitolite v3). Our users are interacting with git over an https connection. Here's the relevant versions of software:
Apache 2.4.6
OpenSSL 1.0.1e-fips
Red Hat Enterprise Linux Server release 6.5 (Santiago)
git version 1.8.5.3 (Server Side)
git version 1.9.2.msysgit.0 (Client Side)
Users sometimes encounter an SSL error message when attempting to run git commands that talk to the server (e.g. clone, push, pull). The error message is "Unknown SSL protocol error in connection to servername:443". Users can usually simply try the command again, and it will then work successfully.
I've managed to capture a bit more output by setting the GIT_CURL_VERBOSE flag, see output below.
Code:
* Couldn't find host servername in the _netrc file; using defaults
* Adding handle: conn: 0x2587c40
* Adding handle: send: 0
* Adding handle: recv: 0
* Curl_addHandleToPipeline: length: 1
[Code] .....
I am also seeing similar issue "AH02001: Connection closed to child with standard shutdown "
Following are the version information
Server: Apache/2.4.6 (Unix) OpenSSL/1.0.2a
I have ftp server (pure-ftp). with firewall.
i allowed 20 and 21 port in "CSF" firewall
now when i or our client connect to the server connection done.
and the they fire dir or ls command they will receive error
"425 Could not open data connection to port 2535: Connection timed out"
what is the problem.i have already allowed passive port 2500:3500 then why i received this types of error
I have a message in queue for about 24 hours and checking the delivery log I found this.
LOG: MAIN
cwd=/usr/local/cpanel/whostmgr/docroot 4 args: exim -v -M 1INUw5-0007VU-DZ
delivering 1INUw5-0007VU-DZ
Connecting to mx.uol.xxx.br [xxx.xxx.com.br]:25 ... connected
SMTP<< 220 starfury20.xxx.com.br ESMTP
SMTP>> EHLO svr01.xx***********
SMTP<< 250-starfury20.xxx.com.br
250-PIPELINING
250-SIZE 20971520
250-VRFY
250-ETRN
250 8BITMIME
SMTP>> MAIL FROM: SIZE=3111
SMTP>> RCPT TO:
SMTP>> DATA
SMTP<< 250 Ok
SMTP<< 450 Client host rejected: cannot find your hostname, [74.86.12.2]
SMTP<< 554 Error: no valid recipients
SMTP>> QUIT
I have checked dnsreport for this domain and found this
WARNING: One or more of your mailservers is claiming to be a host other than what it really is (the SMTP greeting should be a 3-digit code, followed by a space or a dash, then the host name). If your mailserver sends out E-mail using this domain in its EHLO or HELO, your E-mail might get blocked by anti-spam software. This is also a technical violation of RFC821 4.3 (and RFC2821 4.3.1). Note that the hostname given in the SMTP greeting should have an A record pointing back to the same server. Note that this one test may use a cached DNS record.
***********.co claims to be host svr01.xx*********** [but that host is at 74.xx.xx.2 (may be cached), not 74.xx.xxx.13]. <br />
What should i do to correct this error? btw, I host about 100 sites on this server.
i am having an website like a webdirectory. BUT i am getting this error after every 5-10 mintues :
Warning: mysql_pconnect() [function.mysql-pconnect]: User USERNAME
has already more than 'max_user_connections' active connections in
/FIELPATH on line 93
Database error: pconnect(localhost,bstitne_netclass, $Password)failed.
MySQL Error)
Session halted.
PLEASE suggest how can i solve this. May be it is an server issue
Since moving over to a new server, I have had to reboot my sql server about 5 times a day due to it crashing, and I always get the error:
Warning: mysql_connect() [function.mysql-connect]: User food_user has already more than 'max_user_connections' active connections in /home/food/public_html/includes/functions.php on line 9
Not connected : User food_user has already more than 'max_user_connections' active connections
I dont understand what is causing this...I used the tweaking guide as found on here and my.cnf file looks like this:
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
skip-locking
skip-innodb
query_cache_limit=8M
query_cache_size=256M
query_cache_type=1
max_connections=500
max_user_connections=10
interactive_timeout=20
wait_timeout=20
connect_timeout=6
thread_cache_size=128
key_buffer=16M
join_buffer=1M
max_allowed_packet=16M
table_cache=1024
record_buffer=1M
sort_buffer_size=2M
read_buffer_size=2M
max_connect_errors=10
# Try number of CPU's*2 for thread_concurrency
thread_concurrency=4
myisam_sort_buffer_size=64M
#log-bin
server-id=1
[mysql.server]
user=mysql
basedir=/var/lib
[safe_mysqld]
err-log=/var/log/mysqld.log
pid-file=/var/lib/mysql/mysql.pid
open_files_limit=8192
[mysqldump]
quick
max_allowed_packet=16M
[mysql]
no-auto-rehash
#safe-updates
[isamchk]
key_buffer=32M
sort_buffer=32M
read_buffer=16M
write_buffer=16M
[myisamchk]
key_buffer=32M
sort_buffer=32M
read_buffer=16M
write_buffer=16M
Through my WHM, i went to "Show Mysql Processes" and heres what it displays www.brinked.com/mysql.txt
This problem has also occured on another one of my websites on the same server that makes use of mysql. Am I doing something wrong here? I dont think its the script because it ran for years on another server just fine.
although mod_rewrite is active but htaccess i not read why?
and how can i know mod_rewrite is active or not?
(Plesk 7.x)
I am using Windows Server 2003 SP2 Standard Edition. I have installed Active directory and created users and their home folders. Everything works fine except a problem.
When a user from the domain uses the UNC to connect to the server, it shows the shared folder. The user can view and change all other users files, home directory etc. The user can browse all the folders.
I need it to be setup so that the user can only view his own home folder and files and not others. Also when using UNC to browse the server, I want an administrator authentication even if the user is from the same domain.
Here are my current permissions.
NTFS Root folder permission
=================================
Administrators - Full Control
CREATOR OWNER - Special Permission
System - Full Control
Domain Users - Read & Execute, List Contents, Read, Special Permissions.
Share permission of root folder
================================
Domain Users - Read
NTFS Permission for user home folders
=====================================
Created User - Full Control
Administrators - Full Control
CREATOR OWNER - Special Permission
System - Full Control
Domain Users - Read & Execute, List Contents, Read, Special Permissions.
unfortunately my server crashes a lot recently. What happens is that some application creates a MySQL connection which hangs and then MySQL gets overloaded and takes the whole server down.
My question:
1. How do I configure MySQL to time out even on active connections ? I.e. after 30 seconds kill the process no matter if it is still active or not. Is that possible ?
2. How do I exclude the root user from that?
Let's say you ordered new server,do you make active same moment(install httpd server and all other components)or you running test before like memory and hardware test? If yes,which programs you would recommend to test fully hardware?
View 2 Replies View RelatedI've been with Bluehost for over three years. I've really not had any big problems with them. But I've learned that people usually don't have problems with hosts unless they actually have a website that has good traffic.
Well, as my main site has grown, I think I'm outgrowing my host.
I have a forum (SMF) with over 1500 members and close to 80K posts. It's got a good core of very active members. Doing well. The main part of the site is on WP platform.
Friday, I try to bring up the forum and POOF! It's not there. Just a blank screen. No error, no nothing. Call support and they have no clue, but the support guy comments out a line in one of my SMF files and the site comes back up. Don't ask me how he knew to comment out that line or anything.
Things go fine for a few days, then yesterday P.M. I start getting "exceeding CPU" errors and then a 500 error. Keep in mind, I've done nothing to my site in these days to cause any of this or any changes to even make me suspect anything.
Called support two times last night and finally was told to submit a ticket to their scripting department. I could see the PHP errors in my CP and I knew it was something wrong on their end, but no one could figure it out. Well, I haven't heard from support but my site's back up today.
I'm just thinking it may be time to consider switching. Not sure I really want to deal with that, but I'm having more errors and glitches with them in the last year.
I know HostGator gets mostly great reviews. Will my experience there be any different though?
I know lots of people here ask for web host suggestions. I could really use some guidance, not just in companies, but the things I need to keep in mind about my site in particular that would help me choose one.
The server is currently live on /dev/sda and it was installed w/o raid. Now i have added a second HDD in, how do i RAID it?
It's Ubuntu 6.06
I currently have a server with CentOS 4x and cPanel with approximatley 100 active sites on.
I would like to change the hostname on this box, is this possible without causing any disruption to services on this machine?
Would I be correct in thinking its as simple as modifying /etc/hosts(Or doing it in cPanel) and then reactivating the cPanel License?
I've been trying to set an active desktop of a group of users that log into XP machines to an html webpage. So far I haven't had any luck getting the webpage to appear.
What exactly needs to be done in order for this to work correctly? The primary domain controller is running on windows 200 server.
I have active directory setup. Two users are in there that have exchange mailboxes. One has been deleted, but still gets mail on occasion. So, to keep things simple, bob@mydomain.com is a current user. tim@mydomain.com is the one that was deleted. Can I forward mail from tim's address to bob's address without a using a distrobution list?
I usually use contacts to forward mail, but that only appears to work for external addresses, and not for internal addresses (ie, mydomain.com)
Any ideas?
i hosted one server socket application in my dedicated server which is recving the data from different units(vehicle tracking system) through port no 4444.in dedicated machine i am keeping one active session always...that means my socket application exe is opened always in an active session ie sectionA.This session is not logged off insted i used to close the rdp for keeping this session active.Based on settings if userA accessing SessionA then userB cannot able to reach the active sessionA at the same time instead new sessionB will open for userB.
now my question is
if userB also opened socket application in SessionB with same portno ,then which soket application will recive data from the units...whther the applictaion from sessionA or from SessionB?
i site me place on Active members from email .
but not send emails to yahoo server in inbox all emails send to spam or ever not send !
but for google no problem
i read access_log and see a lot of
Code:
::1 - - [08/Apr/2009:02:19:11 -0700] "GET / HTTP/1.0" 200 - "-" "Apache/2.2.3 (CentOS) (internal dummy connection)"
::1 - - [08/Apr/2009:02:19:15 -0700] "GET / HTTP/1.0" 200 - "-" "Apache/2.2.3 (CentOS) (internal dummy connection)"
::1 - - [08/Apr/2009:02:19:18 -0700] "GET / HTTP/1.0" 200 - "-" "Apache/2.2.3 (CentOS) (internal dummy connection)"
::1 - - [08/Apr/2009:02:19:19 -0700] "GET / HTTP/1.0" 200 - "-" "Apache/2.2.3 (CentOS) (internal dummy connection)"
::1 - - [08/Apr/2009:02:19:20 -0700] "GET / HTTP/1.0" 200 - "-" "Apache/2.2.3 (CentOS) (internal dummy connection)"
::1 - - [08/Apr/2009:02:19:21 -0700] "GET / HTTP/1.0" 200 - "-" "Apache/2.2.3 (CentOS) (internal dummy connection)"
::1 - - [08/Apr/2009:02:19:22 -0700] "GET / HTTP/1.0" 200 - "-" "Apache/2.2.3 (CentOS) (internal dummy connection)"
::1 - - [08/Apr/2009:02:19:33 -0700] "GET / HTTP/1.0" 200 - "-" "Apache/2.2.3 (CentOS) (internal dummy connection)"
Then my vps use so much memory now and my site load slowly.
It seems that changing the IP of a web site (which I can't get to work) reactivates records from the default DNS template that have been deactivated...for example the default TXT records are activated, so now the domain may have two SPF records, only one of which is correct. Having multiple A or other records is potentially worse, if, say, "mail." now points to the wrong server.
View 2 Replies View Relatedi saw very often in the active sessions site following line:
Username Empty IP empty Date Nov 30, -0001 12:00 AM Idle time 00:45:39
What is that and how can is stop this or get it fixed ?
Company is using software Parallels Plesk Panel 11.5.30 for Windows
And
There currently are in trouble about how some websites it's can't active Customer, domain or Subcriptions on 1 Resellers.