Let's say you ordered new server,do you make active same moment(install httpd server and all other components)or you running test before like memory and hardware test? If yes,which programs you would recommend to test fully hardware?
View 2 RepliesI was wondering I've been having problems with getting my web server going.
I'm using Apache 2 on my Windows XP SP2 machine. I have a Linksys WRT54GX2 router, and I have Charter 3MB Cable internet. I already called charter to see if they allowed web servers and they said they do. I also asked if they block ports, and they said they don't.
Now my problem... So, I originally thought maybe charter blocked port 80, so I used NO-IP to work around that, I did port forwarding through that. Well, I used there tool canyouseeme.org and it said it couldnt read any ports i put in.
All my firewalls were off and i had my router firewall off. I even put my computer in the DMZ part of my router. I'm about to see if i can connect my modem directly to my computer without having a problem but i wasn't able to a bit ago. Anyone got any clues to waht i could do if nothing changes when i put my modem to my computer.
I currently have a server with CentOS 4x and cPanel with approximatley 100 active sites on.
I would like to change the hostname on this box, is this possible without causing any disruption to services on this machine?
Would I be correct in thinking its as simple as modifying /etc/hosts(Or doing it in cPanel) and then reactivating the cPanel License?
build our our server network for our business and power it with our new 15Mbps/15Mbps Fios Business Plan.
Now I know enough to set up a home network just fine but dealing with a server end is a little different.
What I need a for someone to help me with advise on hardware for our setup ie: Routers, Switches, ect ect
We are looking to start with 2 boxes at this time and may go as big as 5 so we want to be sure we have the equipment to handle it
I would like a Router that allows me to connect 2 uplink connection so if we need to upgrade we can add a 2nd fios line.
a decent router to handle this?
I'm getting myself a colocated server in August.
Its quite a 'powerful' one (Q6600, 2GB, 2x160GB). It will be running Windows Server 2003 Standard edition.
I would also like to make a test 2003 installation on the server itself and most likely a Linux Ubuntu) installation too.
Now VPS looks good, but I have some questions about it.
- Can I run 2003 (virtual in VPS) with the same SPLA license?
- Is it possible to give the power of one core of the CPU (since I got four) to a VPS? (so it doesn't stress other cores)
- For example, I host an application on port 5000 (random chosen ) on the non-VPS system, is it possible to host the same application in the VPS system on the same port with an other IP address assigned to it?
- Whats the best (free if possible, shouldn't have many options (just an on/off switch )) way to make a VPS in Windows?
- Is it a problem with servers of these days to push the 'maximum' (or like 80%) out of the network connection (a gigabits or 100MBits)? Are the server response response times (pings) acceptable for gaming when its under such a load?
I have a Ubuntu 6 LTS server, and so far i have installed and got working:
Apache, PHP5, SQL5
but now i come to EXIM, its installed, and i have installed Solid Pop3d as a pop server - it was in the repository, but now i dont know what to do.
The server exists as a subdomain of another, until its ready for me to move onto. There are no control panels, i wanted to do it all with SSH.
Does anyone know how to set it up so i can connect with a mail client, and how to setup accounts?
I've spent the last several months working on a huge upgrade of a couple dozen websites. The upgrades include modifying Apache so that visitors who arrive at links pointing to mysite/World/New_York are redirected to mysite/world/new-york. In other words, all my links now default to lower case, and underscores are replaced with dashes.
Unfortunately, publishing it has been an endless series of disasters. My websites are now all crashed, and the server is unbelievably slow. It takes pages forever to load (if they load at all), and I can scarcely publish files online.So the following notice sent to me by my webhost got my attention.
IT appears your own server IP is making GET requests to Apache, causing excessive loading and causing service failures. On today's date, your IP made almost 6,000 connections to Apache:<br><br>
[root@host ~]# grep 64.91.229.106 /usr/local/apache/domlogs/mysite.org | wc -l 5924 [root@host ~]#<br><br>
These were all the same request:<br><br>
64.91.229.106 - - [12/Apr/2014:08:10:10 -0400] "GET /404.php HTTP/1.0" 200 14294 "-" "-"<br><br>
And that made up the total of requests:<br><br>
[root@host ~]# grep 64.91.229.106 /usr/local/apache/domlogs/mysite.org | grep "GET /404.php HTTP/1.0" | wc -l 5924 [root@host ~]#<br><br>
I was trying to get Active Sync running on my Windows Server 2008 R2 to be able to sync calenders, adress-books etc. with my mobile without success. With a Linux Server ot seems to be "easy" changeable like posted here: [URL]...
Need getting Active Sync running on my Windows machine? According to the steps in the mentioned post, I failed very early
1. check
2. I changed the following files: =>
"C:inetpubvhostswebmailhordeconfigconf.php"
"C:ParallelsPleskWebmailhordehordeconfigconf.php"
"C:ParallelsPleskWebmailhordehordeconfigconf.php.plesk"
with the values: =>
$conf['auth']['admins'] = array(my mail account);
$conf['activesync']['enabled'] = true;
$conf['activesync']['version'] = '14.1';
3. Rewrite:
here the "problems" start, as of course I don't have the nginx option the question is, where to place the rewrite-rules best?
4. check
5. don't know what to do here, if it even is a problem with the max connections to the imap server?
6. I can restart the mailenable service ?
7. as I have admin rights in horde now, I could do step 7!
That's it? I can't use the active sync features ...
We are a small development team mostly coding in php/mysql as an unpaid hobby. Anyways yesterday our test server had hardware problems and to get a decent new one would be $300. Well this seems a lot to ask for someone that does get any compensation for it. So we are looking for some cheap way of providing a test server. We need at least a way that provides svn, apache w/ php and mysql. We tried to use the webserver, but the head dev didnt like the idea. Any suggestions?
The three devs are in charge of wcreplays.com .
it possible to test own server in my home(only to test)
iam haveing centos 5.4 with vmware
need 2mpbs for testing it be good i think so
but only i haveing issue is ip(iam useing dynamic ips
it anyway to test as local server with dynamic ips?
What is the best way to test the speed of a server?
CPU/processing wise, and not bandwidth wise?
I'm trying to test my colocated webserver's bandwidth. I found speed test links such as this one: [url]
If I just run this on from my colocated web server, would the result be credible?
Although I think these tests are designed for dsl/cable subscribers.
Is there any script or method where I can test my server security?
View 2 Replies View Relatedway to test the speed of your web host? If the answer is ping, what is a good response time to look for?
View 7 Replies View Relatedwhich site can do that job? when i plan to buy a dedicated server,
i want to test speed like my customers worldwide.
I have LAMP -server running and I was wondering how to test it's performance.
So is there any good tools for that? I'm interest how many http queries my server could handle etc.
Here are the Servers IPs which are all located @ Malaysia but different datacenter:
Server 1:
Data Center: Brickfield
IP: 202.75.55.188
Server 2:
Data Center: Jaring
IP: 202.190.175.218
Server 2:
Data Center: Cyberjaya
IP: 202.71.103.132
My host keeps telling me that it is my connection but my server keeps getting slower and slower. how can I actually test it?
View 3 Replies View Relatedi set a new server with some setting,
i want to test if it can handle how many connection or burst bandwidth,
i want to use other server(s) to test with it,
can i use any way to do this work?
i just buyed a dedicated server with 100mbps dedicated port..
how can i test the traffic on port to see is is realy working on 100mbps?
I have a problem. to buy dedicated server but I don't really know what to buy. I need some kind of stress test for server so that I can be assured that my website won't crash when it will be on front page of digg. Does something like that even exists?
View 7 Replies View RelatedI have a question getting the setup of my DNS and email server working correctly.
In my mailserver, lets say I set the SMTP server to mail.BLUE.com. Through my DNS, I set an MX record for mail.BLUE.com and I set an A record for mail.BLUE.com to 1.1.1.1.
I create different domains on my mail server and give each an IP address. BLUE.com is 1.1.1.1. RED.com is 2.2.2.2. GREEN.com is 3.3.3.3.
Each domain is setup in my DNS as a forward lookup zone. Each domain has an MX record (mail.domain_name.com) and a A record (pointing mail.domain_name.com to it's IP address). There are other records of course... but they're not important for my question.
When I want to check or send mail from BLUE.com I use mail.BLUE.com. When I want to check or send mail from RED.com I use mail.RED.com. I do this for all my email accounts.
But, when I check dnsstuff.com on any domain besides BLUE.com, it tells me the following:
****************************
mail.RED.com claims to be host mail.BLUE.com [but that host is at 1.1.1.1 (may be cached), not 2.2.2.2].
****************************
Now... this can send and receive mail just fine... but I think this may cause issues when it comes to SPAM settings (some servers may consider our mail SPAM because we're "pretending" to be a different mail server).
So... here's my question... what's the best way to set everything up to run multiple sites and email accounts on one server?
How can I use 1 SMTP mail server (BLUE.com) and get my other domains to pass the dnsstuff.com test?
Can any one tell me, How to perform speed test on my VPS...
View 1 Replies View RelatedIs there a website/tool/software I can use for testing my web server performance?. I need a server based solution because I don't have enough bandwith to run it from my pc.
View 3 Replies View RelatedI have used e2fsck on linux server hard disk (CentOS 5.0) and the result :
=================================
Warning! /dev/sda2 is mounted.
Warning: skipping journal recovery because doing a read-only filesystem check.
/dev/sda2 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Deleted inode 19137773 has zero dtime. Fix? no
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Block bitmap differences: -(16332803--16332804) -(16332823--16332826) +(16345421--16345424) +16347209
Fix? no
Free blocks count wrong for group #498 (25950, counted=25949).
Fix? no
Free blocks count wrong (37023218, counted=37023216).
Fix? no
Inode bitmap differences: -19137773
Fix? no
Free inodes count wrong (19162546, counted=19162545).
Fix? no
/dev/sda2: ********** WARNING: Filesystem still has errors **********
/dev/sda2: 137806/19300352 files (2.3% non-contiguous), 1556879/38580097 blocks
=================================
I don't know the exact meaning of the displayed result , does it mean bad sectors? How much the e2fsck is reliable? Is there any better Linux utility to check bad sectors on Western Digital HDD?
When I restart my server all my domains opens at apache test page. Suspending and reactivating any domain fixes all domains.
View 4 Replies View RelatedWINDOWS SERVER Plesk Panel version 12.0.18
Error: Test the database server connection failed:
mysqlnd cannot connect to MySQL 4.1+ using the old insecure authentication. Please use an administration tool to reset your password with the command SET PASSWORD = PASSWORD('your_existing_password'). This will store a new, and more secure, hash value in mysql.user. If this user is used in other scripts executed by PHP 5.2 or earlier you might need to remove the old-passwords flag from your my.cnf file
I have a message in queue for about 24 hours and checking the delivery log I found this.
LOG: MAIN
cwd=/usr/local/cpanel/whostmgr/docroot 4 args: exim -v -M 1INUw5-0007VU-DZ
delivering 1INUw5-0007VU-DZ
Connecting to mx.uol.xxx.br [xxx.xxx.com.br]:25 ... connected
SMTP<< 220 starfury20.xxx.com.br ESMTP
SMTP>> EHLO svr01.xx***********
SMTP<< 250-starfury20.xxx.com.br
250-PIPELINING
250-SIZE 20971520
250-VRFY
250-ETRN
250 8BITMIME
SMTP>> MAIL FROM: SIZE=3111
SMTP>> RCPT TO:
SMTP>> DATA
SMTP<< 250 Ok
SMTP<< 450 Client host rejected: cannot find your hostname, [74.86.12.2]
SMTP<< 554 Error: no valid recipients
SMTP>> QUIT
I have checked dnsreport for this domain and found this
WARNING: One or more of your mailservers is claiming to be a host other than what it really is (the SMTP greeting should be a 3-digit code, followed by a space or a dash, then the host name). If your mailserver sends out E-mail using this domain in its EHLO or HELO, your E-mail might get blocked by anti-spam software. This is also a technical violation of RFC821 4.3 (and RFC2821 4.3.1). Note that the hostname given in the SMTP greeting should have an A record pointing back to the same server. Note that this one test may use a cached DNS record.
***********.co claims to be host svr01.xx*********** [but that host is at 74.xx.xx.2 (may be cached), not 74.xx.xxx.13]. <br />
What should i do to correct this error? btw, I host about 100 sites on this server.
i am having an website like a webdirectory. BUT i am getting this error after every 5-10 mintues :
Warning: mysql_pconnect() [function.mysql-pconnect]: User USERNAME
has already more than 'max_user_connections' active connections in
/FIELPATH on line 93
Database error: pconnect(localhost,bstitne_netclass, $Password)failed.
MySQL Error)
Session halted.
PLEASE suggest how can i solve this. May be it is an server issue
Since moving over to a new server, I have had to reboot my sql server about 5 times a day due to it crashing, and I always get the error:
Warning: mysql_connect() [function.mysql-connect]: User food_user has already more than 'max_user_connections' active connections in /home/food/public_html/includes/functions.php on line 9
Not connected : User food_user has already more than 'max_user_connections' active connections
I dont understand what is causing this...I used the tweaking guide as found on here and my.cnf file looks like this:
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
skip-locking
skip-innodb
query_cache_limit=8M
query_cache_size=256M
query_cache_type=1
max_connections=500
max_user_connections=10
interactive_timeout=20
wait_timeout=20
connect_timeout=6
thread_cache_size=128
key_buffer=16M
join_buffer=1M
max_allowed_packet=16M
table_cache=1024
record_buffer=1M
sort_buffer_size=2M
read_buffer_size=2M
max_connect_errors=10
# Try number of CPU's*2 for thread_concurrency
thread_concurrency=4
myisam_sort_buffer_size=64M
#log-bin
server-id=1
[mysql.server]
user=mysql
basedir=/var/lib
[safe_mysqld]
err-log=/var/log/mysqld.log
pid-file=/var/lib/mysql/mysql.pid
open_files_limit=8192
[mysqldump]
quick
max_allowed_packet=16M
[mysql]
no-auto-rehash
#safe-updates
[isamchk]
key_buffer=32M
sort_buffer=32M
read_buffer=16M
write_buffer=16M
[myisamchk]
key_buffer=32M
sort_buffer=32M
read_buffer=16M
write_buffer=16M
Through my WHM, i went to "Show Mysql Processes" and heres what it displays www.brinked.com/mysql.txt
This problem has also occured on another one of my websites on the same server that makes use of mysql. Am I doing something wrong here? I dont think its the script because it ran for years on another server just fine.
I freshly installed Plesk 12.0 on Ubuntu 14.04. Everything works accept the MySQL database creation.
When I try to create one, i get this error :
error: the test connection to the database server has failed because of network problems: connection refused...