Apache :: White Pages For Enabled Site And Localhost
Jan 7, 2015
I'm using Oracle's VirtualBox.My network on the virtual box is set to Bridged Adapter
apache/2.4.7
php 5.5.9
Linux/Ubuntu 14.04.1 LTS
No errors in my apache2 error.log file.
First time creating a server on a virtual box. I am not confident i understand how my computer browser access the virtual box server i created. Once i understand that i could fix my issue. Which is, I can't finding my enabled site or localhost via my browser on my computer. All i get is a white page for both. I don't even see the it works page.
I am following this book and got stuck on chapter 1: Understanding and Setting Up Our Development Environment.
link to book -- URL...
I have installed Oracle's VirtualBox, mounted Ubuntu, installed apache2 with $ sudo apt-get install apache2 -y. At this point everyone says, now go to your ip and you will see "It Works". Which i do not see. I see a white page with nothing on it. I then looked to see if the localhost /var/www/html/ index. html even exists. Which is does, i opened the file and i can see the line "It Works!".
My hosts file on my computer has ../driver/etc/hosts
127.0.0.1 localhost
192.168.56.1 magento.localhost.com
My hosts file on my Virtual box /etc/hosts
127.0.0.1 localhost
127.0.1.1unbuntu
192.168.56.1 magento.localhost.com
View 3 Replies
ADVERTISEMENT
Oct 29, 2014
How do I architect and design a dynamic, white-label website i.e. a site where the components are dynamic based on a path component in the URL?
View 1 Replies
View Related
Mar 14, 2015
So, let me start off by saying I am completely new to website and FTP server hosting. I've hosted game servers in the past so I know about port forwarding and the like but this is obviously a step-up. I've managed to get a fully-functioning FTP server that works great on the domain I'm using but the website using Apache just gives people a blank white screen (as stated in the description). I'm using port 55567 for the website as I don't know want to use 80 because of security risks and what not. The domain being used is delawaretexasrepository.t28.net. Below are the error.log, httpd.conf and httpd-vhosts.conf.
httpd-vhosts.conf: [URL] ....
httpd.conf: [URL] ....
error.log: [URL] ....
View 8 Replies
View Related
Apr 25, 2009
Ii need to redirect domain.com/register.html , domain.com/search.php and login.html to domain.com/index.php
Do anyone know how to do this with .htaccess?
View 3 Replies
View Related
Mar 31, 2009
Apache includes a handy little program called ab
You can use this to measure how long it takes a web site to deliver a page n times
I wonder if people would like to state how fast their sites using shared web hosting can deliver simple pages, one in HTML and one in PHP (people can add other scripting languages if they wish.
Please don't post the site name or host name, just the results; I'd be interested in seeing what the range of results is, without getting into debates about hosting sites.
Here are two web pages
hello.html:
<html>
<body>
<h1>Hello, world</h1>
</body>
</html>
hello.php:
<html>
<body>
<?php
echo "<h1>Hello, php world</h1>";
?>
</body>
</html>
Here are the test commands; note I set the concurrency level to 1 ("-c 1"), which gives a more realistic measure of the user response time for low-traffic sites.
html: ab -k -c 1 -n 50 [url]
php: ab -k -c 1 -n 50 [url]
And here are my results:
************** html:
Server Software: Apache/1.3.37
Concurrency Level: 1
Time taken for tests: 6.196 seconds
Requests per second: 8.07 [#/sec] (mean)
Time per request: 123.929 [ms] (mean)
Time per request: 123.929 [ms] (mean, across all concurrent requests)
Transfer rate: 3.36 [Kbytes/sec] received
************** php:
Server Software: Apache/1.3.37
Concurrency Level: 1
Time taken for tests: 15.859 seconds
Requests per second: 3.15 [#/sec] (mean)
Time per request: 317.190 [ms] (mean)
Time per request: 317.190 [ms] (mean, across all concurrent requests)
Transfer rate: 0.93 [Kbytes/sec] received
View 4 Replies
View Related
Dec 9, 2007
I've had a localhost server setup for awhile now, and all of a sudden when I access [url]it wants to download my "index.php" file. However, when I access it via [url]is loads fine.
View 7 Replies
View Related
May 20, 2014
I have Apache 2.4.6 running without problem on Windows 7 Ultimate.
I upgraded to Apache 2.4.9 by:
Stopping Apache;
Renaming the 2.4.6 directory to "old";
Extracting the files from the zip to the Apache directory; and
Copying the old httpd.conf to the Apache directory.
After rebooting I found that I could not access localhost (or 127.0.0.1).
I then reverted to Apache 2.4.6. Localhost is now working.
View 2 Replies
View Related
Apr 27, 2006
I'm currently trying to configure apache 2 to handle subdomains. This is on a local machine (not tied to any domain names) and I'm only doing it to research how the final structure of a site 'could' be setup.
Basically I have a single install of Apache 2 running. The outcome eventually should be to have specific sub domains that all point to the same document root as the actual domain name. So eventually I will have:
http://www.mydomain.com
http://subdomain1.mydomain.com
http://subdomain2.mydomain.com
with both subdomains showing the content at mydomain.com (there is reasoning behind this but I'm not gonna go into that).
I have apache setup as follows:
NameVirtualHost *:80
<VirtualHost *:80>
ServerName daneastley
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
</VirtualHost>
<VirtualHost *:80>
ServerName subdomain1.daneastley
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
</VirtualHost>
<VirtualHost *:80>
ServerName subdomain2.daneastley
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
</VirtualHost>
Now on my local machine, only the top one works - the subdomains dont. if I add the following into my hosts file in windows, they all work:
127.0.0.1 daneastley
127.0.0.1 subdomain1.daneastley
127.0.0.1 subdomain2.daneastley
the problem being, that I wish to test this enviroment on the local network. How would I go about having every computer being able to access this? I'm assuming it comes down to DNS stuff.
View 0 Replies
View Related
Oct 10, 2013
I have a simple app where i am currently downloading some images from the internet. I want to use a local web server to host some of these images when i am not connected to the internet. I installed the apache web server and added the images folder under htdocs - my document root.
Now, i want something like when i continue to query images from www.examplesite.com/xyzimage.png within my app, it should be redirected to localhost/images. Is this possible? I tried doing this
In C:WINDOWSsystem32driversetchosts i added this line URL:...
Also in the httpd.conf i set the foll -
RewriteEngine On
RewriteCond %{HTTP_HOST} ^(www.)?examplesite.com$ [NC]
RewriteCond %{REQUEST_URI} !^/examplesite
RewriteRule ^(.*)$ /images/$1 [L]
but it doesnt seem to work.
View 1 Replies
View Related
Aug 4, 2013
I've very slow response (from 1-2 seconds to tens of seconds) from http://localhost using Apache 2.4.3/Win32 service on Windows 8/32bit (6.2 build 9200). It doesn't depend on the browser used. Responses from all other sites are much faster.
Because it seemed to me to be a DNS issue, I tried to uncomment "127.0.0.1 localhost" and/or "::1 localhost" line in the hosts file, put "http://127.0.0.1" or "http://[::1]" instead of "http://localhost" into the browser, flushing dns by ipconfig /flushdns, stopping DNS Client by "net stop dnscache", disabling IPV6, etc. but nothing worked.
It seems that hosts file is ignored and "localhost" is passed to external DNS. Ping localhost yields to "Reply from ::1: time<1ms" response, ping 127.0.0.1 yields to expected "Reply from 127.0.0.1: bytes=32 time<1ms TTL=128" response.
Finally, "unplugging the network cable" is the only solution I've found: then the connection to localhost is much faster.
How to get instant response when connected?
View 6 Replies
View Related
Mar 12, 2013
I need to modify a web that is working in the server. I'd like to download it to my computer and test it. For this reason I have to change the htaccess file to change the redirects, but it doesn't work, appears 404 error
This is the code.
RewriteEngine On #rewritecond %{http_host}
^camps.es [nc] rewritecond %{http_host}
^camps [nc] #rewriterule
^(.*)$ http://www.camps.es/$1 [r=301,nc] rewriterule
^(.*)$ http://localhost:8887/camps/$1 [r=301,nc]
View 3 Replies
View Related
Aug 4, 2013
I have a home server set up with a couple of things going. Here is the weird thing that I can't figure out. I can access everything just fine from an INTERNET connection external to my LAN using my domain name, let's say "domain.com". So, if I type into my computer on my LAN www.domain.com, it searches without actually finding it's destination giving up after a period of time saying the server cannot be found.
But, if I type www.domain.com on my mobile phone using my data connection, it connects without a hitch and everything functions fine. I have done this set up before at a different home, but since I moved, I have come across this problem and either don't remember having this happen before or don't remember what I did to resolve it. What I should look for?
View 5 Replies
View Related
Nov 22, 2013
My customer wants a Windows system - but I'm rusty at best in Windows.I downloaded VC11 x86 Thread Safe (2013-Nov-13 20:57:44), unpacked it, moved it to it's own directory, edited httpd.conf (no auto installation) and confirmed it was working (localhost/index.html)
I added PHP and ran a PHP info - a little trouble getting the php.ini found.Apache seems to work fine on the local system - either localhost/index.html or nn.nn.nn.nn/.But remote browsers timeout when attempting to connect.
1. I've opened command as administrator and run httpd.exe directly
2. I've installed httpd.exe as a service, opened it's properties window and started it from there
3. Changed the listen port to 8080
4. netstat sees the remote browser with a waiting connection - and the local service
5. The Windows system is on my Mac network (same systems where the remote browser is) and I have transferred megabytes of files between the two systems.
In Component Services - the Apache2.4 service shows Log On As 'Local Service' - I'm guessing it should show as 'Network Service.I tried changing this - used the local user login - restarted the service. I didn't see any way to change it to 'Network Service'. Perhaps this is the problem?
ODDLY - the remote browser worked briefly - then failed with the same 'time out'.I'm guessing this is something simple that I don't understand about Windows - (then again, since I don't understand much about Windows, it could be complicated too).
View 4 Replies
View Related
Mar 12, 2015
my local host is just taking incredibly long to load. At work I've set it up no differently and it works like a charm, but at home, it works.. But at times it doesnt load instantly until I restart my browser. I have to press refresh or enter to login a million times for it to load after the first few seconds I use it.
View 1 Replies
View Related
Oct 30, 2008
I'm on windows vista. I've got an SDSL line into the house with a dedicated IP 62.etc. I've then got a Prestige 791R and all PC's plugged in to that. I've also got a wireless router for my Wii set up.
Basically I've set up this DHCP thingy to start at 192.etc.3 and the Wireless router is at 192.etc.1 and the Prestige is at 192.etc.2 my pc is at 192.etc.9
This is about where my knowledge stops unfortunately.
I have installed apache as the most basic default install I think you can and it seems to be working absolutely fine. I'm assuming I could also install PHP and MySQL etc and wouldn't have too much of a problem, however, my friend cannot seem to access the environment from the WAN IP and when I type in my WAN IP I get the prestige router's control panel.
I read somewhere that I needed to forward port 80, now I can 'open' ports in the prestige control panel but I did try opening port 80 in the control panel and pointing it to my LAN IP (92.etc.9) but it didn't seem to work.
I'm at a bit of a loss so if anyone could point me in the right direction I would be most grateful, just to clarify:
//localhost loads the html file 100%
//192.etc.9 loads the html file 100%
//62.WANIP internally loads my prestige routers control panel
//62.WANIP externally does not load a page (cannot be found)
If you need any more info just let me know and I'll get it.
View 0 Replies
View Related
Mar 23, 2007
I've just downloaded Microsoft Virtual PC and the Internet Explorer 6 Application Compatibility VPC Image containing an XP installation for testing sites with IE6 [url].
Everything works fine, I chose VPC Shared Networking (NAT) and I can access the internet from the VPC as well as my Apache development server which runs on the host OS (Win XP) by going to the host's IP address which is [url] in my case. And here I have 2 problems:
1. I want to access [url]on VPC just by typing [url]. I added the following line to the hosts file:
192.168.52.141 localhost
But this doesn't work. Interestingly, any name other than localhost works fine, for example:
192.168.52.141 localhost.localhost
or
192.168.52.141 local
This is not a major problem but I'd prefer localhost. Any ideas how to do that?
2. And the more important issue: on my host OS I have some development sites which I have set up to be accessed by subdomains, for example [url], in httpd.conf:
Code:
<VirtualHost 127.0.0.3>
ServerName perfekt.localhost
DocumentRoot C:wwwperfekt
DirectoryIndex index.php index.html
</VirtualHost>
and in hosts file:
Code:
127.0.0.3 perfekt perfekt.localhost
And now I want to access this site from my VPC too by using subdomains like this! How can I do that? The address 127.0.0.3 seems to be local to the OS and VPC can't see it. I have tried setting other IP addesses in httpd.conf but nothing outside the 127.x.x.x range works on either OS. I suppose I need to make each of my sites to be seen under a different IP from the outside network so that VPC (which is "outside" the host OS) can access them - then I just set up the appropriate subdomain names in VPC hosts file -
View 0 Replies
View Related
Jun 17, 2013
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
xxx.xxx.xxx.xxx/~user/test/index.html
View 3 Replies
View Related
Jun 17, 2013
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
Quote:
http://xxx.xxx.xxx.xxx/~user/test/index.html
Apache v2.2
RHEL6
UserDir configured/running
SuExec configured/running
Below is the relevant vhost block in httpd.conf:
Code:
<VirtualHost *:80>
ServerName test
ServerAlias test
DocumentRoot /home/user/public_html/test
<IfModule mod_fcgid.c>
[Code] .....
I don't have a FQDN as yet, so I just made a entry in /etc/hosts as follows:
Code:
127.0.0.1 test
Here is an excerpt from the Apache error log:
Quote:
[Mon Jun 17 12:02:16 2013] [error] [client xxx.xxx.xxx.xxx] client denied by server configuration: /home/user/public_html/test/index.html
I've checked the firewall and the /etc/hosts.allow- that's not it. I've read the Apache docs and in the vhost block Allow should be evaluated last, and apparently is matching localhost but is not matching my IP.
View 5 Replies
View Related
Feb 20, 2013
I just setup an intranet wiki running apache2.2 on ubuntu 12.04. The server currently requires two-way certificate authentication (i.e. a server cert AND client certs).In <VirtualHost *:80>, Redirect permanent / https://<intranetSite>
Everything works dandy, except now that I'd like to find a way to bypass the client cert check for localhost so that I can run some maintenance scripts via cron on the server. Or perhaps it's possible to bypass SSL entirely, just for localhost?
View 2 Replies
View Related
Jun 20, 2009
I get the following error when let my site connect to my database: Access denied for user 'apache'@'localhost' (using password: NO)
But when im running lil test script which connect to my localhost with the same passwords and it gives the status 'Connection OK' (im running on admin account, made a MySQL account with DA)
Code:
<?php $link = mysql_connect('localhost','admin_removed','removed'); if (!$link) { die('Could not connect to MySQL: ' . mysql_error()); } echo 'Connection OK'; mysql_close($link); ?>
View 2 Replies
View Related
Jul 15, 2013
I'm new to Apache. I'm using a version 2.4 for Windows 7. It didn't come in as an .msi so I had to configure the appropriate web-server name via the httpd text document.
Each time I go to http://localhost, I am present with a page with the content "It works." I tried adding a different .html file into the directory to see if I could access that also, but I was not able to navigate to it via the address bar. So I edited the content of index.html from 'It works!' to "It works?!!!" but sadly, the actual page is still showing 'It works!' for its content (Rather ironic, huh?).
So, for whatever reason, the actual 'localhost' page isn't updating or even noticing any of my edits in what I presume to be the correct directory.
Here's my httpd document for referenc [URL] ....
View 7 Replies
View Related
Oct 1, 2007
I am having this issue with a new box where Apache at random serves blank pages and won't serve anything but until it's restarted. I see no errors in /var/log/messages either to show why this is happening.
It's not all pages either just several various ones. I know it's not a programming issue either because the only thing the server is running is one instance of vBulletin.
I look at top during this and CPU and RAM usage are very low.
The only fix to get Apache to serve the pages is to restart it.
Anyone have any clues on what it could be?
I set my php.ini memory limit to a gig (I have 16 gigs in the sever)
View 1 Replies
View Related
Jan 23, 2014
How do I add multiple web pages to my server?
View 6 Replies
View Related
Feb 17, 2014
I am delivering my php scripts from a new Apache server on CentOS delivering them only at the end of the loading. What is a pain, especially for pages being used by iOS apps just needing the xml section even if the script goes further, or when presenting information while they are generated.
View 3 Replies
View Related
Apr 22, 2009
Looking trough my logs I found something that bothers me, there are bots who keep doing requests on my website with pages like /admin or /secure to find vulnerabilities.
It's making about 5-6 requests for unexisting pages every second until it comes to the end of it's dictionary (the pages are even sorted in alphabetical order,
Is there some way to let my Apache server block access to these bots when they make X attemps to see a page who does not exists in a short amount of time? A bit like iptables reject connection if someone tries to log in but fails to do so too many times.
View 6 Replies
View Related
Aug 20, 2005
I'm hoping to redirect visits to any page in an old directory to the index page of a new directory.
In other words, redirect:
[URL] ....
[URL] ....
Is this possible? If so, how could I do it?
In my .htaccess I currently have:
Code :
RedirectPermanent /facts/ http://www.domain.com/newfacts/
but this only redirects the index page.
View 19 Replies
View Related
Nov 21, 2013
I work for a company with a highly trafficked site (about 100,000 unique daily visitors). We have our "MANAGED" hosting through Rackspace for quite the pretty penny per month. It includes a dedicated back end / DB server and cloud servers for the front end.
The setup has been functioning perfect for 10 months now; but this past Monday the speed of the site immediately dropped. Page load times fell from 1-2 seconds to between 10-20 seconds, and sometimes not at all. As far as we know (and as far as Rackspace says), no server setting were modified. No new code was introduced on our end. It's a mainly static site, with minimal user interaction with the backend at all.
We've monitored the traffic, checked IPs, etc. We've even tunes down several site features in the interest of reducing server load. Upon a server reboot, the active threads/processes running on it IMMEDIATELY jump back up to maxed out levels. It seems like once our daily traffic reaches 10MB/s, a type of queue forms and the delays begin. Rackspace assures us that we're not limited to that.
Versions:
OS: cent OS on cloud
OS: Redhat on Dedicated Server
Apache: 2.2
PHP: 5.3 / MySQL: 5.1.69
Some more background info: The site is typically busiest from 7am until 3pm EST. For the past few days, we've noticed that between 7am and 9-10pm the server has just lagged incredibly. However, at around that 9-10pm mark, something changes and the pages go back to loading almost instantly. (There is still decent traffic though.) Then at around 7am again it slows to a crawl.
Rackspace has offered solutions such as spinning up another server and incorporating their load balancing - they are in the process of this BUT they do NOT think the traffic is the issue. At one point they actually said there was potential packet loss somewhere in the network, but no progress has been made.
View 2 Replies
View Related
Jul 30, 2014
I've updated to Apache 2.4.10 from 2.4.9 and all of a sudden my pages don't load anymore.Previously I had this issue rarely and closing the PHP-cgi.exe processes fixed it.But since the update the issue happens almost constantly.
View 17 Replies
View Related
Nov 24, 2013
I have installed APC on our Windows server. After I enable APC and restart apache our pages throwing Lots of PHP Notices.
Code :
System Windows NT 6.1 build 7601 (Windows Server 2008 R2 Web Server Edition Service Pack 1) i586Architecture x86Server API Apache 2.4 Handler Apache LoungeThread Safety enabledPHP Extension Build API20100525,TS,VC9Apache Version Apache/2.4.2 (Win32) OpenSSL/1.0.1c PHP/5.4.4Virtual Server Yes
View 2 Replies
View Related
