I have a home server set up with a couple of things going. Here is the weird thing that I can't figure out. I can access everything just fine from an INTERNET connection external to my LAN using my domain name, let's say "domain.com". So, if I type into my computer on my LAN www.domain.com, it searches without actually finding it's destination giving up after a period of time saying the server cannot be found.
But, if I type www.domain.com on my mobile phone using my data connection, it connects without a hitch and everything functions fine. I have done this set up before at a different home, but since I moved, I have come across this problem and either don't remember having this happen before or don't remember what I did to resolve it. What I should look for?
I need to modify a web that is working in the server. I'd like to download it to my computer and test it. For this reason I have to change the htaccess file to change the redirects, but it doesn't work, appears 404 error
I'm new to Apache. I'm using a version 2.4 for Windows 7. It didn't come in as an .msi so I had to configure the appropriate web-server name via the httpd text document.
Each time I go to http://localhost, I am present with a page with the content "It works." I tried adding a different .html file into the directory to see if I could access that also, but I was not able to navigate to it via the address bar. So I edited the content of index.html from 'It works!' to "It works?!!!" but sadly, the actual page is still showing 'It works!' for its content (Rather ironic, huh?).
So, for whatever reason, the actual 'localhost' page isn't updating or even noticing any of my edits in what I presume to be the correct directory.
I'm on windows vista. I've got an SDSL line into the house with a dedicated IP 62.etc. I've then got a Prestige 791R and all PC's plugged in to that. I've also got a wireless router for my Wii set up.
Basically I've set up this DHCP thingy to start at 192.etc.3 and the Wireless router is at 192.etc.1 and the Prestige is at 192.etc.2 my pc is at 192.etc.9
This is about where my knowledge stops unfortunately.
I have installed apache as the most basic default install I think you can and it seems to be working absolutely fine. I'm assuming I could also install PHP and MySQL etc and wouldn't have too much of a problem, however, my friend cannot seem to access the environment from the WAN IP and when I type in my WAN IP I get the prestige router's control panel.
I read somewhere that I needed to forward port 80, now I can 'open' ports in the prestige control panel but I did try opening port 80 in the control panel and pointing it to my LAN IP (92.etc.9) but it didn't seem to work.
I'm at a bit of a loss so if anyone could point me in the right direction I would be most grateful, just to clarify:
//localhost loads the html file 100% //192.etc.9 loads the html file 100% //62.WANIP internally loads my prestige routers control panel //62.WANIP externally does not load a page (cannot be found)
If you need any more info just let me know and I'll get it.
My main domain is working perfectly but when I want to add a new domain name it doesn't work. I usually go to addon domain, choose a directory that matches the name and create my addon domain. I have an index.htm file there but when I type the www.domainname.com it doesn't work even after a week.
I have the DNS set to my webhost company's DNS servers.
I have been using IIS 7.5 on a Win7 32-bit computer. We moved to a Win7 64-bit machine and 1 app does not work. I am thinking of trying Apache 32-bit to see if that works. The script that is causing problems calls Office Word to create a document. Here is a simplified version of script.
Yesterday i was putting a website to manage in localhost but i had to abilitate the usage of mod_rewrite. when i'm in the index and i try to open links i have this message..The requested URL /c3click.php was not found on this server.Here are the steps that i followed:
1) Search for LoadModule ReWrite and decommenting 2) Search for Servername localhost
<Directory /> AllowOverride all Require all granted </Directory>
3) Search for C:/wamp/www
Options all
# # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # AllowOverride FileInfo AuthConfig Limit # AllowOverride all
# # Controls who can get stuff from this server. # # Require all granted # onlineoffline tag - don't remove Order Deny,Allow Allow from all Allow from 127.0.0.1 Allow from ::1 Allow from localhost
4) Reboot the server
In the beginning of my .htaccess file there's written
RewriteEngine On RewriteBase / Options -Multiviews
My configuration is Windows 7, Apache 2.4.4 on Wamp Server 64bit.
In the apache_error.log file i discovered this
[Wed Oct 02 10:33:47.582049 2013] [:error] [pid 2412:tid 1496] [client 127.0.0.1:50195] script 'C:/wamp/www/c3click.php' not found or unable to stat, referer: http://localhost/Lavoro/C3click/01-10-2013_Sito/
I'm trying to accomplish a rather common task of removing file extensions, where say, instead of index.php, just index can be accessed.
I've gone through many tutorials that offer all sorts of different ways how this can be accomplished and none of it works but what's commonly given is something like this.
today I noticed that whenever I type any of the domain names on my server with a "www." in the address bar, it simply says "server not found". When I remove the "www.", it loads the site?
This is a major issue. It never used to be this way, but I noticed it today. Where should I edit? Could it be "named.conf"? Or maybe just DNS cname settings in plesk?
I try to backup my sites at "Admin Backup/Transfer" with ftp to another site with admin level it doesn't work. I alway get the message that the admin backups have been created in /home/admin/admin_backups instead of to another site.
I've had two (or three) versions installed on my Fedora linux server. It seems I've had something installed when I just rented server, after that I've tried to upgrade by building PHP from source.
PHP, installed with yum (before upgrading) had 5.1.6 version. When I ran phpinfo(), browser displayed this version. But when I ran "php -v" in command line, it displayed 5.2.5 version.
I've got this error when server booted up:
Quote:
[20-Nov-2007 03:27:30] PHP Warning: PHP Startup: json: Unable to initialize module Module compiled with module API=20060613, debug=0, thread-safety=0 PHP compiled with module API=20050922, debug=0, thread-safety=0 These options need to match in Unknown on line 0
So, I've removed old version(s):
Quote:
rpm -qa | grep php rpm -e *package*
yum remove php
Then I've downloaded latest version of PHP 5.2.5 and installed it. I've copied configuration list that yum uses for older version:
After that PHP doesn't work with Apache2. Whe I try to load any .php page, I get PHP source code as simple text instead of result of executed PHP code.
When I install PHP with yum again, it works.
I wonder how can I install latest PHP from source? How to fix the problem with Apache2?
I ordered a RapidSSL (also called QuickSSL) cert from RapdiSSL.com (GeoTrust) to test out an email service. It works on firefox, but not in any version of IE I have on my two computers at home, a PC and a laptop running 6.0sp2 and 7.0 respectively.
When I raised a trouble ticket, Geotrust responded with a ppt attachment that clearly shows the cert working for the domain in IE. I have no reason to doubt them, but I replied with a ppt of my own showing the cert not working and am waiting for their reply.
Is it possible for a cert not to work on a specific browser like this? When I asked my email service provider, they said the following:
Quote:
Hello,
This indicates a problem with the SSL certificate that was installed. Possibly, an intermediate certificate issued by your certificate authority is need to be installed in addition to the one you gave us to enable Internet Explorer to fully trust your certificate and show the secure site.
Note for example that the only difference between going to [url]and [url] is the certificate in use ... the same server and software with the same settings is used in both cases. I recommend going back to Geotrust and ask if there is a Geotrust Intermediate certificate that should be installed in addition to your issued certificate."
The domain is CNAMED to their server so that the app looks as if it is being run off my domain. I don't think there is anything non-standard about this because LuxSci is a topnotch provider and this is how they enable their clients to run private label services.
I installed Apachetop on one of servers. Installation went fine, but when I run it, nothing is displayed. No data, no stats. I see only blank screen with these details:
last hit: 00:00:00 atop runtime: 0 days, 00:00:00
I left it running for about 10 minutes, and still no output is displayed. There is CentOS 4.4 installed on server.
i have dedicated server and was trying to install torrentflux in there ( well might be any other script with Mysql needs) I created databse with plesk but when i put it to confinguration it does not work. I have done this Many times on shared hosting though
i tried to create .htaccess file to protect hotlinking ; it's worked perfect with Firefox but can't work with IE. Here's my .htaccess file:
Code: RewriteEngine on
<Limit GET POST> order deny,allow deny from all allow from all </Limit> <Limit PUT DELETE> order deny,allow deny from all </Limit> AuthName domain.com AuthUserFile www est.htpasswd
i want to install a red5 streaming server on FreeBSD6.2
The install was no problem and i get no errors.
So far so good.
But, i want to stream with the rtmp protocal so i used flv player to test. The link i tried was rtmp://xxx.xxx.xxx.xxx/oflaDemo/Transformers.flv (standard red5 example file)
But i get nothing on the screen, i tried a lot of other urls but no succes, red5 seems to work (see below for details)
How can i test of red5 works after a standard installation?
Access denied with code 406. Error verifying files: Received no output from the approver script (execution failed?) "/usr/local/apache/htdocs/upload_scan.pl" ....
I created an email account in cpanel. But then when I try to click 'webmail' by that account, it won't work. It takes me to the option screen where I can click Horde Mail or Squirrel Mail. After I click either one of them, it then just takes me to a log in screen like it didn't accept my login info. I try typing in my username and password but it doesnt work.
Is this a permission thing I need to set in WHM? I'm clueless.
