we are getting a number of:
does not like recipient.
Remote host said: 550 relay not permitted
checked for IP stauts and it is not flagged or listed as banned, there would be no reason however I double checked and there were no issues there.
Can someone suggest if this is a server issue?
Using a custom mx entry as well
So basically it due to the MX change, it looks like it sees any incoming email (addressed to local domain) as relaying.
< gateway4.lastspam.com #5.1.1 SMTP; 550-gateway4.lastspam.com [209.172.54.237]:36995 is currently not permitted to relay>
EXIM errors:
2007-05-19 09:39:32 H=gateway4.lastspam.com [209.172.54.237]:37074 I=[xxx.xxx.67.88]:25 F=<eslight@domain.com> rejected RCPT <test@xtdv.com>: gateway4.lastspam.com [209.172.54.237]:37074 is currently not permitted to relay through this server. Perhaps you have not logged into the pop/imap server in the last 30 minutes or do not have SMTP Authentication turned on in your email client.
I've been working on this for some time now, but I'm not sure on how the settings were transfered over to this server. I wish I was there when it was done.
Anyways, we got a new server and we transfered all the accounts to the new one. The old one is gone. When people send emails to their email accounts on the server, this is returned:
This is an automatically generated Delivery Status Notification
Delivery to the following recipient failed permanently:
admin@crewxp.com
Technical details of permanent failure:
PERM_FAILURE: SMTP Error (state 9): 550 relay not permitted ....
I had this issue some minutes ago, i was trying to send a large email list using outlook, the email client didn't show any errors and delivered everything ok.. but mails never go out of the box... so I decided to search the logs and found this:
Code:
2007-08-15 14:07:41 H=xx.xx.xx.xx.dynamicip.rima-tde.net (info@mywebsite.com) [xx.xx.xx.xx] F=<info@mywebsite.com> rejected RCPT <micheltoria@libero.it>: xx.xx.xx.xx.dynamicip.rima-tde.net (info@mywebsite.com) [xx.xx.xx.xx] is currently not permitted to relay through this server. Perhaps you have not logged into the pop/imap server in the last 30 minutes or do not have SMTP Authentication turned on in your email client.
2007-08-15 14:07:42 unexpected disconnection while reading SMTP command from xx.xx.xx.xx.dynamicip.rima-tde.net (info@mywebsite.com) [xx.xx.xx.xx]
Authentication required was active at the email account configuration, everything was well configured.. it was a server wide error.
Searching over the net i found this solution: ran /scripts/mailperm and after that I added "127.0.0.1" to /etc/relayhosts list, restarted Exim and the problem was resolved, all mails were delivered OK.
My question is, what is the function of /etc/relayhosts, /scripts/mailperm (fixing mailbox permissions?) and /etc/localdomains ? Is it OK to have 127.0.0.1 in /etc/relayhosts list?
I checked everywhere and could find the fix i need so i hope you guys can help me out.
I often get this error when someone on my server tries to send an email:
=====
A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
XXXXXXXX@XXXXX.com
Gid 99 is not permitted to relay mail, or has directly called /usr/sbin/exim instead of /usr/sbin/sendmail.
=====
Any clue on how i could fix this. If you need more info just tell me ill do my best to responde.
This is what I got from the tech support:
Quote:
I able to manage to mount your old var, tmp, usr, and even the old root partitions but the home partition were unsuccessful.
I've tried mounting your old home partition but i was unsuccessfull which might be a bad sector of the drive.
Code:
# mount /dev/ad3s1g /mnt/oldhome/
mount: /dev/ad3s1g: Operation not permitted
I own a dedi server from HFW few hours ago some hacker injected following php code in some of the domains hosted on the server as follows; ...
View 14 Replies View RelatedI've noticed that my site has delays every few seconds when using the database. At least 2-4 seconds. Now the load is 0.05 basically.
So I did a ping from my webserver to the db server and got:
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=0.138 ms
ping: sendmsg: Operation not permitted
64 bytes from 10.0.0.2: icmp_seq=3 ttl=64 time=0.086 ms
64 bytes from 10.0.0.2: icmp_seq=4 ttl=64 time=0.104 ms
ping: sendmsg: Operation not permitted
I then turned off iptables and it works fine now. How to know what's causing this?
I have WHM 11.23.2 cPanel 11.23.6-R27698
CENTOS Enterprise 4.7 i686 on standard - WHM X v3.1.0
I host people who use a certain php script. This script is updatable from their admin panel.
But now 2 of the sites are getting this error when they try to update:
[Install update]
Uncompress update: error
Tar_error.log: /bin/tar: admin/ioncube: Cannot utime: Operation not permitted /bin/tar: admin/cronjobs: Cannot utime: Operation not permitted /bin/tar: admin: Cannot utime: Operation not permitted /bin/tar: fonts: Cannot utime: Operation not permitted /bin/tar: images: Cannot utime: Operation not permitted /bin/tar: includes: Cannot utime: Operation not permitted /bin/tar: mysql_restore: Cannot utime: Operation not permitted /bin/tar: plugins: Cannot utime: Operation not permitted /bin/tar: templates: Cannot utime: Operation not permitted /bin/tar: utilities: Cannot utime: Operation not permitted /bin/tar: Error exit delayed from previous errors
I've never seen that particular error before.
I'm currently running SAMBA on one my linux servers, and wanting to connect to it from another linux server.
1. Do I need to install SAMBA on the connecting server (client-side)?
2. I can see/mount the SAMBA folder just fine, I can delete,make,etc. The only thing I can't do on the client side is change ownership of a file or folder... even if I'm logged in as root.
I try to upload a big file between 300 and 500 MB by FTP to my dedicated server but connection is broken and when I try to do the resume it's not allowed how can I enable upload big files and resume files in ProFTPD 1.3.0a or am I missing something inthe conf file ?.
Here is the log: ..........
I Have Problem:
Code:
[root@serwer /]# /scripts/upcp --force
Updating /scripts...
Sync Source: http://httpupdate.cpanel.net/RELEASE/scripts
Fetching http://httpupdate.cpanel.net/cpanels...cpanelsync.loc
k (0)....@69.72.164.152......connected......receiving......Done
Fetching http://httpupdate.cpanel.net/cpanels...cpanelsync.bz2
(0)....@69.72.164.152......connected......receiving...26%...53%...80%...100%...
...Done
...Done
Checking and Repairing System Package Setup......Done
Setting up ip startup......Done
Configuring editors......Done
Creating symlinks for common binaries......Done
Setting Clock...rdate: rdate: could not set system time: Operation not permitted
...Done
Running Env Auto Repair...quota test: repquota exited with signal 0 (ok)
...Done
...
This is VPS server on my dedicated server
1. Dedicated server is on Debian 4.0
2. On debian is OpenVZ
3. On OpenVZ is CentOS 5
4. On CentOS is cPanel
How I will unblock rdate on my VPS ?
OS: CentOS 6.4 (Final)
After upgrading components as suggested by "Tools&Settings->Plesk->Updates and Upgrades" item, components remained the previous version (PHP 5.3.3 and MySQL 5.1.73) as stated by phpinfo() result and by "Tools&Settings->Server Management->Server Components" list, though "Update Components" is no more permitted as if there is nothing more to update.
I need both PHP and MySQL servers updated in order to run Joomla 3.3.6.
Whenever I try to create a user account I get the following error
Sorry, resellers are not permitted to create subdomains of the server's main domain
My server domain is www.domain.com and reseller is trying to create a user account like new.domain.com . It was working fine a few weeks back but I think since I upgraded the cpanel and whm, it doesnt allow creation of accounts anymore.
Could someone help me to fix this error please?
I own the VPS and the reseller and all other accounts.
I will wanted to know if hmailserver lets configure the quantity of outgoing emails it is permitted in an hour or minutes. I have found this:
hMailServer is pre-configured to have high security when it comes to relaying and authentication so that no one can use your server to send spam messages.
But I do not know if It refers to what I want or to an antihack or something like that to protect my server.
Somehow I've opened up my postfix server to act as an open relay and it's already being taken advantage of. The following is my postconf
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = postmaster
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
allow_min_user = no
allow_percent_hack = yes
allow_untrusted_routing = no
alternate_config_directories =
always_bcc =
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
append_at_myorigin = yes
append_dot_mydomain = yes
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = yes
body_checks =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file =
broken_sasl_auth_clients = yes
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
canonical_maps = hash:/etc/postfix/canonical
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_limit = 20
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 10000
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
disable_dns_lookups = no
disable_mime_input_processing = no
disable_mime_output_conversion = no
disable_verp_bounces = no
disable_vrfy_command = no
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
enable_original_recipient = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
expand_owner_alias = no
export_environment = TZ MAIL_CONFIG LANG
fallback_transport =
fallback_transport_maps =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred, defer
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
helpful_warnings = yes
home_mailbox =
hopcount_limit = 50
html_directory = no
ignore_mx_lookup_error = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = all
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes =
invalid_hostname_reject_code = 501
ipc_idle = 100s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address =
lmtp_bind_address6 =
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations =
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps =
lmtp_discard_lhlo_keywords =
lmtp_enforce_tls = no
lmtp_generic_maps =
lmtp_host_lookup = dns
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_threshold_time = 500s
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_enable = no
lmtp_sasl_mechanism_filter =
lmtp_sasl_password_maps =
lmtp_sasl_path =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile =
lmtp_tls_CApath =
lmtp_tls_cert_file =
lmtp_tls_dcert_file =
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers =
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers =
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site =
lmtp_tls_policy_maps =
lmtp_tls_scert_verifydepth = 5
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level =
lmtp_tls_session_cache_database =
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_limit = 2
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay =
mail_name = Postfix
mail_owner = postfix
mail_release_date = 200600825
mail_spool_directory = /var/mail
mail_version = 2.3.3
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = fcntl, dotlock
mailbox_size_limit = 51200000
mailbox_transport =
mailbox_transport_maps =
mailq_path = /usr/bin/mailq.postfix
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters =
message_size_limit = 10240000
message_strip_characters =
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros =
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 1000s
multi_recipient_bounce_reject_code = 550
mydestination = localhost.$mydomain, localhost, $mydomain, $myhostname
mydomain = thatscriptguy.com
myhostname = thatscriptguy.com
mynetworks = 127.0.0.0/8 66.90.121.0/24
mynetworks_style = subnet
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases.postfix
non_fqdn_reject_code = 504
non_smtpd_milters =
notify_classes = resource, software
owner_request_special = yes
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_authorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 1000s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
receive_override_options =
recipient_bcc_maps =
recipient_canonical_classes = envelope_recipient, header_recipient
recipient_canonical_maps =
recipient_delimiter =
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
remote_header_rewrite_domain =
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix-2.3.3/samples
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps = hash:/etc/postfix/canonical
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail.postfix
service_throttle_time = 60s
setgid_group = postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address =
smtp_bind_address6 =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_threshold_time = 500s
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_enable = no
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 5
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_delay_reject = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = 40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key = <>
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_mynetworks permit_sasl_authenticated reject_unauth_destination
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_local_domain =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile =
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file =
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers =
smtpd_tls_key_file = $smtpd_tls_cert_file
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_tls = no
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = !EXPORT:!LOW:!MEDIUM:ALL:+RC4:@STRENGTH
tls_low_cipherlist = !EXPORT:ALL:+RC4:@STRENGTH
tls_medium_cipherlist = !EXPORT:!LOW:ALL:+RC4:@STRENGTH
tls_null_cipherlist = !aNULL:eNULL+kRSA
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = dev:/dev/urandom
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = hash:/etc/postfix/virtual
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
Any help is very much appreciated.
I am using Exim4.
Please guide me that how to set domainlevel auth without relay?
I send a few emails today and got a phonecall that people did not get my email. So I went into WHM and viewed "Top Email Relayers" There I saw my emails.
I am using WHM 11.11.0 cPanel 11.15.0
So what are Email Relayers?
How can I get my mails out of there so they can be send?
I have found a bunch of articles to setup Sendmail as a mail relay, but none have been successful for me or the articles are very outdated. Anyone have a 'stupid-proof' set of current instructions on how setup Sendmail Pop before SMTP? This is a CentOS 4.5 Box with Sendmail 8.14.2/8.13.1 and Dovecot. Any successful guidance would be appreciated!
View 3 Replies View RelatedOccasionally when sending an email to an international address, I receive a rejected notice:
550 5.7.1 Relaying denied. IP name forged (PTR and A records mismatch) for (serverIP)
Nothing was changed anytime recently so I'm not sure why this would happen. How would I trace this type of error? Its a legitimate outgoing mail from my server to the intl recipient.
SPF has been set since day one and unchanged.
The mail server IP has rdns set to it and has been for a long time.
i have to get rid of an open relay state on my server, and i cant do it! i have antirelayd on my WHM but it seems its not working, any idea? please or at least wich line in /scripts/antirelayd i have to check to see if its everything ok.
i saw an older post, tried everything but nothing works x_X
i have this notification that keeps coming from the same ip at least 10 or 20 times a day since 3 days aprox. dunno what it is...
this is the message:
Quote:
subject: lfd on nameserver.domain: RELAY Alert for 200.27.xxx.xxx (domain.cl)
body:
Time: Thu Jun 5 10:56:19 2008
Type: RELAY, Remote IP - 200.27.xxx.xxx (domain.cl)
Count: 101 emails relayed
Blocked: No
Sample of the first 10 emails:
2008-06-05 10:19:56 1K4GJo-00040m-Rf <= 3eseofertas@gmail.com H=(mail.gmail.com) [200.27.xxx.xxx] P=esmtp S=1738 id=20080605102044.5323CE2BEB4A1707@gmail.com T="Especial Empresas STGO - CCTV -Evaluacion en Terreno sin Costo."
it looks like spam... is my server sending spam or im receiving it?
Please see this picture attached .
How can i change the Destination email?
I have a cPanel server with CSF installed.
Today I face a problem having SMTP Relay attack
I Enabled SMTP Tweak inside WHM and it prevent the relays
But I am still seeing a huge attack inside my exim_mainlog through one of the domain hosting in the server.
I Delete the domain DNS zone, Change the domain name server, it still doesn't stop the attack. How do I go with this? Need help for those experienced in this...
H=mail1.data393.net [208.42.234.80] F=<> rejected RCPT <305stevengan@techobceat.com>: mail1.data393.net [208.42.234.80] is currently not permitted to relay through this server. Perhaps you have not logged into the pop/imap server in the last 30 minutes or do not have SMTP Authentication turned on in your email client.
I'm searching for a smtp service that lets me send email from several different emails (domains), lets me connect to non standard port numbers, and which is not banned/do not accept spam.
View 7 Replies View RelatedIs it possible to relay a MMS stream from linux?
MMS server in the US -> my VPS in the US -> me in Australia
I've been reading, and it seems that I have to use ACL. But, how do I setup a proper ACL to keep my server from being an open relay?
View 2 Replies View RelatedI am looking for 20 BNC for irc usage with custom vhost and standard vhost options.
I prefer the company to be in UK or Europe, but may look at the US
Can anyone recommend me a company or companies.