SMTP Relay Service ...
Oct 9, 2009I'm searching for a smtp service that lets me send email from several different emails (domains), lets me connect to non standard port numbers, and which is not banned/do not accept spam.
View 7 RepliesI'm searching for a smtp service that lets me send email from several different emails (domains), lets me connect to non standard port numbers, and which is not banned/do not accept spam.
View 7 RepliesAnyone know of a good place to do SMTP relaying through?
We have legitimate clean email that we need to send for my site that gets filtered as junk mail for the major free email services (Hotmail, Yahoo mail, AOL mail, etc.). Unfortunatley it is legitimate email that needs to get through to the end user to register their account.
Right now we use the free 250 smtp relays per day that come with our free GoDaddy hosting account but we are quickly approaching the need to send more than 250 a day and GoDaddy charges a healthy amount for more than 250 a day.
Anyone know of a good economical SMTP relay service?
I have a cPanel server with CSF installed.
Today I face a problem having SMTP Relay attack
I Enabled SMTP Tweak inside WHM and it prevent the relays
But I am still seeing a huge attack inside my exim_mainlog through one of the domain hosting in the server.
I Delete the domain DNS zone, Change the domain name server, it still doesn't stop the attack. How do I go with this? Need help for those experienced in this...
H=mail1.data393.net [208.42.234.80] F=<> rejected RCPT <305stevengan@techobceat.com>: mail1.data393.net [208.42.234.80] is currently not permitted to relay through this server. Perhaps you have not logged into the pop/imap server in the last 30 minutes or do not have SMTP Authentication turned on in your email client.
I'd like to describe an issue and see if this sounds familiar to anyone, or if there is a solution that I have not thought of yet.
CAUSE: My ISP (yeah, it's comcast) began blocking port 25 inbound so my personal mail server was no longer receiving mail.
RESOLUTION: I worked through a new DNS re-router to change the port that would now receive mail: from port 25 to port 587. It took me a while to get the routes pointed correctly, but I finally got the messages to route, get through my firewall, and hit the mail server.
NEW PROBLEM: After some IP and DNS routing issues, I finally got things to work, the email that gets sent finally arrives at my mail server. However, the mail server (Alt-N MDaemon) now requires AUTH from the incoming DNS re-direct.
BIG QUESTION: How do I configure MDaemon mail server (or any other mail server, for that matter) to accept the mail from the new re-route server? Mail now re-directed to the new port ALWAYS comes from that route (mx-routes01.editdns.net). Where in the configuration settings of MDaemon do I set it up? I've tried including the host name and the IP address into every WhiteList list I can find, added it to the trusted host name list and everything. I'm at a loss, since it's impossilbe to configure the re-route server to provide AUTH credentials to my mail server. MDaemon now replys to every mail reuqest with : 530
Authentication required (in reply to MAIL FROM command)
GoDaddy says: "You have reached your current SMTP relay limit of 1000 per day on the following hosting account" But they assigned a limit of 1,000 -- and i don't use SMTP relay at all. I have set up my active email accounts to use Google SMTP. When I tell GoDaddy about this, they tell me it is my responsibility. So what do i do?
View 2 Replies View RelatedI m using cpanel and exim 4 and my server ip is black list. Now i want to change my server ip address.
How can i do this?
I have edited exim.conf
Remote_smtp:
driver = smtp
interface = 192.168.0.1
But it is not working please guide me any other way.
Server - Windows 2003, IIS, Windows Mail
I am undergoing heavy SMTP attack, if i accept all connections in RELAY setting of SMTP
If i grant access only to Server IP, then attack stops, but all emails send, start bouncing back to me, as relay failed.
to change ip for smtp relay. I need to use a separate ip to send all the emails from my server.
View 6 Replies View RelatedI have a dedicated windows 2003 server that acts as an smtp relay (legit purposes, not open).
There are large amounts of mail relayed through the server and I would like to install some 3rd party software that can scan the messages/attachments for viruses.
Ideally, if one exists it strips it from the message and notifies the recipient and/or sender of the problem.
any ideas on where to start?
I've been trying to set up Postfix to send email for the past few days. I've managed to get it to ask for a username and password, in order to try and send mail to an external domain
I can receive email fine on the server, but I can't send email out
Here is my main.cf file
Code:
command_directory = /usr/sbin
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
unknown_local_recipient_reject_code = 550
mynetworks = 127.0.0.0/8 192.168.3.0/24
smtpd_recipient_restrictions = permit_mynetworks permit_inet_interfaces permit_sasl_authenticated reject_unauth_destination
mynetworks_style = class
smtpd_sasl_auth_enable = yes
allow_untrusted_routing = yes
relay_domains =
smtpd_client_restrictions = permit_mynetworks permit_inet_interfaces
smtpd_sasl_application_name = smtpd
smtpd_sasl_local_domain = $mydomain
smtp_sasl_mechanism_filter = !plain, static:rest
broken_sasl_auth_clients = yes
smtp_sasl_mechanism_filter = login
myorigin = literatifoundation.org
mydomain = literatifoundation.org
myhostname = literatifoundation.org
mydestination = $myhostname, localhost.$mydomain, $mydomain
When I try to login to send the email, it doesn't accept the password.
I have Plesk 12 on CentOS 7. I have only MSMTP installed not Postfix or Qmail. No matter what settings I use in the external SMTP settings the mail is never sent and I cannot find any error logs.
I have tried gmail smtp, sendgrid smtp and another smtp server that I own.
This is not a firewall issue as far as I can tell since if I install postfix it just works. Also any Wordpress or Joomla installs that use SMTP settings with gmail or sendgrid work just fine.
Screenshot for information only. I used accurate usernames, passwords, etc.
↑
Quick update. I tried the recommended CentOS 7 with the same result. Can installing Plesk 12 without a mail server and using the msmtp relay option actually works?Click to expand...
After setting up a new server on Plesk12, I successfully ran some test mail outs using phpmailer using the SMTP server on this machine
However, there was an issue in creating new local mail accounts in plesk with an error message each time.
Investigating this issue led me to a solution that I should run mail_restore from the Plesk scripts
This cured the problem of setting up new local accounts but outgoing SMTP mail is always failing with 'relay access denied'.
i found the service for backup of SMTP:
If your mail server or network goes down, our backup SMTP can receive and store your incoming e-mail for up to 30 days. E-mail and ecommerce orders will keep coming, giving your IT staff time to repair the problem. Our standard service reattempts delivery every 15 minutes until your mail server is back online.
Seems that is good decision if you want to provide quality services for your cusutmers, but i want to know your opinion regarding this service or similar. did you use services like this , and can you share some experience for this?
Am using Windows 2003 server with IIS6.0 and SMTP.I tried to send mail using ASP.net C# code through SMTP service.But my mails are getting queued in C:InetpubmailrootQueue.
What could be the problem??I've done many trouble shooting steps but no luck.I changed the Relay settings.Since I am in a LAN connection, i've tested the relay setting using both the 'localhost'and 'MyDomainIP'but everything in vain.
Since 15.05.2015 smtp experiencing problems.
Smtp service (qmail) stops responding on port 25:
# time telnet localhost 25
Trying 127.0.0.1...
quit
quit
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
quit
quit
Connection closed by foreign host.
real 4m10.629s
user 0m0.000s
sys 0m0.002s
After server restart or sometimes apache stop or ixnetd restart its responding for a some random time, and then again it stops to respond. Plesk panel show it as stopped but qmail itself running in memory, and does other its work, it just stops responding at port 25, or responds with a huge delay.
I've tried change it to postfix, reconfigured with mchk, repaired with repair.sh -r, disabled and uninstalled parallels antivirus, antispam, dnsbl, disabled firewall, disabled smtp lock. Checked apache, dns. Enabled submission port which works when 25 port doesnt, but i need working 25 port.
Nothing solves problem, its just stops responding after some random time. There is no errors on maillog.
I think this problem occured after recent plesk microupdate, because i didn't do anything to server configuration in last months.
This article says it might be dnsbl [URL] .... but it disabled(from plesk panel) on my server, maybe there is way to focefully kill any relation to dnsbl?
Plesk info:
OS Red Hat Enterprise Linux Server 5.9 (Tikanga)
Panel version 11.5.30 Update #50, last updated at May 18, 2015 05:21 PM
The system is up-to-date; last checked at May 17, 2015 10:56 PM
update: xinetd restart is definitely brings smtp alive, but it goes off after random period of time (5min ~ couple hours)
Is there a KB (I couldn't find one) - to implement rate limiting for receiving mail on our service nodes?
Just had another customer account compromised (not a very weak password either) - and that meant > 250,000 emails - a LOT of cleanup.
Not only do we need rate limiting, but we also need notification of potential abuses.
I have a Server with Centos7 + Plesk 12 and in the service configuration say that the Bind service is not installed, from command line i have install named services and make a manual configuration the first domain, but when I return to the service page in plesk... the problem is the same, the Bind Service is not installed; then the problem is when i want create a new hosting i need to go to the ssh to make the DNS configuration...
View 1 Replies View RelatedGot following Problem: Unable to find service node for web service on domain with id = 0
After a Check from [URL] ....
I tried this: [URL] ....
Result:
+--------------------+--------------+---------------------------------------+------------------------------+------------+
| Domains | Service Type | IpAddressesCollections.ipCollectionId | Current value of ipAddressId | Have to be |
+--------------------+--------------+---------------------------------------+------------------------------+------------+
| XXXXXXXXXXXXX.org | mail | 30 | 0 | 1 |
+--------------------+--------------+---------------------------------------+------------------------------+------------+
Resolution:
mysql -uadmin -p`cat /etc/psa/.psa.shadow` -Dpsa -e 'Update IpAddressesCollections SET ipAddressId = 1 WHERE ipCollectionId = 30'
Result: ERROR 1062 (23000) at line 1: Duplicate entry '30-0' for key 'PRIMARY'
Deleted a domain workspace in Parallels Plesk and now I am getting this error when signing into the panel:Looked at the logs and been trying multiple commands (including the bootstrapper repair etc.)I found the full error from the logs:
[13-Jun-2015 16:35:33 UTC] PleskDBException: Unable to find service node for web service on domain with id=6
file: /usr/local/psa/admin/plib/PhDomain.php
line: 1404
code: 0
trace: #0 /usr/local/psa/admin/plib/Smb/Subscription/Domain.php(490): PhDomain->getWebHostingServiceNode()
[code]....
We are currently using Parallel Plesk 11.0 version and there is one requirement from microsoft provider to add the exact same values in SRV Records.
Priority of Service = 100
Weight of Service = 1
but these values are not available in the dropdownlist. attached are the screenshots.
Clean install on openSUSE 13.1
After deleting a domain, we got the following error which rendered the panel useless.
Internal error: Unable to find service node for web service on domain with id=5
Message Unable to find service node for web service on domain with id=5
File PhDomain.php
Line 1402
Type PleskDBException
Go To Previous Page
Somehow I've opened up my postfix server to act as an open relay and it's already being taken advantage of. The following is my postconf
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = postmaster
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
allow_min_user = no
allow_percent_hack = yes
allow_untrusted_routing = no
alternate_config_directories =
always_bcc =
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
append_at_myorigin = yes
append_dot_mydomain = yes
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
biff = yes
body_checks =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file =
broken_sasl_auth_clients = yes
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
canonical_maps = hash:/etc/postfix/canonical
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_limit = 20
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 10000
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
disable_dns_lookups = no
disable_mime_input_processing = no
disable_mime_output_conversion = no
disable_verp_bounces = no
disable_vrfy_command = no
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
enable_original_recipient = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
expand_owner_alias = no
export_environment = TZ MAIL_CONFIG LANG
fallback_transport =
fallback_transport_maps =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred, defer
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
helpful_warnings = yes
home_mailbox =
hopcount_limit = 50
html_directory = no
ignore_mx_lookup_error = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = all
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes =
invalid_hostname_reject_code = 501
ipc_idle = 100s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address =
lmtp_bind_address6 =
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations =
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps =
lmtp_discard_lhlo_keywords =
lmtp_enforce_tls = no
lmtp_generic_maps =
lmtp_host_lookup = dns
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_threshold_time = 500s
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_enable = no
lmtp_sasl_mechanism_filter =
lmtp_sasl_password_maps =
lmtp_sasl_path =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile =
lmtp_tls_CApath =
lmtp_tls_cert_file =
lmtp_tls_dcert_file =
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers =
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers =
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site =
lmtp_tls_policy_maps =
lmtp_tls_scert_verifydepth = 5
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level =
lmtp_tls_session_cache_database =
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_limit = 2
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay =
mail_name = Postfix
mail_owner = postfix
mail_release_date = 200600825
mail_spool_directory = /var/mail
mail_version = 2.3.3
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = fcntl, dotlock
mailbox_size_limit = 51200000
mailbox_transport =
mailbox_transport_maps =
mailq_path = /usr/bin/mailq.postfix
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters =
message_size_limit = 10240000
message_strip_characters =
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros =
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 1000s
multi_recipient_bounce_reject_code = 550
mydestination = localhost.$mydomain, localhost, $mydomain, $myhostname
mydomain = thatscriptguy.com
myhostname = thatscriptguy.com
mynetworks = 127.0.0.0/8 66.90.121.0/24
mynetworks_style = subnet
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases.postfix
non_fqdn_reject_code = 504
non_smtpd_milters =
notify_classes = resource, software
owner_request_special = yes
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_authorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 1000s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
receive_override_options =
recipient_bcc_maps =
recipient_canonical_classes = envelope_recipient, header_recipient
recipient_canonical_maps =
recipient_delimiter =
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
remote_header_rewrite_domain =
require_home_directory = no
resolve_dequoted_address = yes
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix-2.3.3/samples
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps = hash:/etc/postfix/canonical
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail.postfix
service_throttle_time = 60s
setgid_group = postdrop
show_user_unknown_table_name = yes
showq_service_name = showq
smtp_always_send_ehlo = yes
smtp_bind_address =
smtp_bind_address6 =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_never_send_ehlo = no
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_threshold_time = 500s
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_randomize_addresses = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_enable = no
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_skip_5xx_greeting = yes
smtp_skip_quit_response = yes
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 5
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_delay_reject = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = 40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key = <>
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_mynetworks permit_sasl_authenticated reject_unauth_destination
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_local_domain =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile =
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 5
smtpd_tls_cert_file =
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers =
smtpd_tls_key_file = $smtpd_tls_cert_file
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_tls = no
soft_bounce = no
stale_lock_time = 500s
strict_7bit_headers = no
strict_8bitmime = no
strict_8bitmime_body = no
strict_mime_encoding_domain = no
strict_rfc821_envelopes = no
sun_mailtool_compatibility = no
swap_bangpath = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = !EXPORT:!LOW:!MEDIUM:ALL:+RC4:@STRENGTH
tls_low_cipherlist = !EXPORT:ALL:+RC4:@STRENGTH
tls_medium_cipherlist = !EXPORT:!LOW:ALL:+RC4:@STRENGTH
tls_null_cipherlist = !aNULL:eNULL+kRSA
tls_random_bytes = 32
tls_random_exchange_name = ${config_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = dev:/dev/urandom
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps = hash:/etc/postfix/virtual
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
Any help is very much appreciated.