Xen Windows Template
Jul 4, 2008Does anyone know how to a template of a windows guest in Xen?
I want to create a image for future deployment. I'm using LVM system, most of the instructions on the web are for .img files.
ADVERTISEMENT
Plesk 12.x / Windows :: Template Doesn't Work
Jul 15, 2015I installed wordpress on a website space of my customer using the plesk install-wordpress function.
I bought a wordpress template to templatemonster.com .
I followed instructions to install it [URL] .....
After the cherryframework upload, when I click on "activate", the server returns a 500 error.
I contacted the templatemonster.com technical support, and they say that it is a plesk issue ( [URL]
Plesk 12.x / Windows :: Virtual Machine Template With Installed Panel
Mar 20, 2015I would like to create VMM template with installed plesk panel 12.0.18
But after I executed sysprep plesk panel didn't work.
All services, application pool work, but when I try to connect https://localhost:8443 I get an error "The page can't be displayed"...
Plesk 11.x / Windows :: Migration - DNS Server Does Not Support Networks In Transfer Restrictions Template
Oct 18, 2013I'm migrating from Plesk 9.5 to 11 and I'm getting the following on my Transfer Pre-Check from within the Migration Manager."The destination DNS server does not support networks in the Transfer Restrictions Template, but some subscriptions have networks in DNS transfer restrictions. The records with network IP addresses in the DNS transfer restrictions will not be restored."
I've gone to Server, DNS Settings, Transfer Restriction Template and added the new server's IP to the list of allowed networks to no avail. I also couldn't find any documentation on what the cause might be.
Building An Os Template
Oct 9, 2009How would I go about building an ostemplate?
I want to build one running Ubuntu 8.04 LTS and ISPConfig on openvz
Could I pretty much start with the Ubuntu 8.04 minimal install and then run the ispconfig installation [url]
and then make an ostemplate out of that?
The part that concerns me is will the hostname autopopulate based on what is setup during the build of the vm?
What about the SSL info it asks me for during the install, should I just enter something generic for that or?
Has anyone else done this?
I don't want hostinabox to be the only image with a control panel
Adding A Template To An URL
Feb 19, 2009i saw a website template that i would like to purchase. i can change the contents of the template to whatever i like. i can also register a URL and have it hosted. my question is..... how do i get the template to show on the URL? do i need to know HTML?
View 5 Replies View RelatedVps Template (virtuozzo)
Jul 8, 2008I'm having Virtuozzo vps template issues (now known as "Parallel").
I downloaded the ubuntu ez template and ran the below accordingly after wget'ing the template files in root mode of the *node*
vzpkg create cache
It was going just fine, until this in the end
Quote:
Selecting previously deselected package console-common.
Unpacking console-common (from .../console-common_0.7.68_all.vz.deb) ...
Selecting previously deselected package screen.
Unpacking screen (from .../screen_4.0.3-0.2ubuntu2_i386.vz.deb) ...
Selecting previously deselected package vim-runtime.
Unpacking vim-runtime (from .../vim-runtime_1%3a7.0-164+1ubuntu7.2_all.vz.deb) ...
dpkg-deb: unexpected end of file in between members in /vz/template/ubuntu/7.04/x86/apt/archives/vim-runtime_1%3a7.0-164+1ubuntu7.2_all.vz.deb
E: Sub-process /usr/bin/dpkg received a segmentation fault.
ERROR: /usr/bin/dpkg error, retcode=100
I also get this error on a second vps node:
Create cache for all uncached OS templates...
Debug: Using temporary VEID 10000001
Debug: Mounting VE private area
E: The method driver /usr/lib/apt/methods//download/mirrors/fedora-core-7 could not be found.
ERROR: Can not load mirrirlist(s): /download/mirrors/fedora-core-7
ERROR: Can not get yum configs for fedora-core-7-x86 OS template
cat /vz/template/fedora-core/7/x86/config/os/default/mirrorlist
$SW_SERVER/download/mirrors/fedora-core-7
$SW_SERVER/download/mirrors/updates-released-fc7
http://mirrors.fedoraproject.org/mir...ra-7&arch=i386
http://mirrors.fedoraproject.org/mir...d-f7&arch=i386
Virtuozzo Ez-template Errors
Nov 21, 2008I have a Virtuozzo NODE here.
When attempting to create a new vps container using Ubuntu 7.0.4 ez-template in VZMC, I get this:
The following error(s) were detected:
Description
1004
Error during VPS 106 creation: Error invoking vzctl utility: Creating VPS private area (ubuntu-7.04-x86)
Cached package set /vz/template/cache/ubuntu-7.04-x86.tar.gz not found
You probably need to run 'vzpkg create cache'
Creation of VPS private area failed
I ran vzpkg create cache again and getting errors...
Unpacking console-tools (from .../console-tools_1%3a0.2.3dbs-65ubuntu3_i386.vz.deb) ...
Selecting previously deselected package console-common.
Unpacking console-common (from .../console-common_0.7.68_all.vz.deb) ...
Selecting previously deselected package screen.
Unpacking screen (from .../screen_4.0.3-0.2ubuntu2_i386.vz.deb) ...
Selecting previously deselected package vim-runtime.
Unpacking vim-runtime (from .../vim-runtime_1%3a7.0-164+1ubuntu7.2_all.vz.deb) ...
dpkg-deb: unexpected end of file in between members in /vz/template/ubuntu/7.04/x86/apt/archives/vim-runtime_1%3a7.0-164+1ubuntu7.2_all.vz.deb
E: Sub-process /usr/bin/dpkg received a segmentation fault.
ERROR: /usr/bin/dpkg error, retcode=100
CentOS release 3.6 (Final)
ISPconfig OS Template Review
Oct 25, 2008I decided to create an os template for hypervm with iscpconfig [url]
installed as control panel, to offer as an alternative to cpanel/lxadmin.
Of course the panel is bit ghetto and unappealing but it works and does the job right and it's also absolutely with no limitations free
I was wondering if few fellow competitors can take the time to review this image and notify me if they find any bugs/errors.
You can download it here [url]
After you create a VM with this template the control panel can be found on [url]
Please note that I wouldn't recommend on using this template on a production server.
CentOS - CPanel OS Template
Dec 14, 2008I have a HyperVM server and want to see if anyone have a CentOS 5 / cPanel OS template they care to share?
View 7 Replies View RelatedWHM Account Setup Template
Oct 19, 2007Im running Cpanel 11 Release (stage 2) and i was wondering if you can setup WHM so that when an account is created, it automatically has:
A default generic SPF record
suphp_ConfigPath set for custom php.ini (/home/username/php.ini)
Custom session.save_path for php (/home/username/tmp)
Create /home/username/tmp folder
I think thats about it for now. Any ideas? I know about zone templates, but they dont seem to fit this bill. They might work for the SPF records though.
Supports Mod_perl And Template Toolkit
Aug 23, 2008web host that offers a shared hotsing account that allows users to install or already have installled perl modules like mod_perl and template toolkit using cpanel.
View 4 Replies View RelatedWhere To Find A CPanel/WHM OS Template For OpenVZ
Oct 5, 2008where I can find a cPanel/WHM OS Template for OpenVZ. Also looking for a DirectAdmin.
View 5 Replies View RelatedPlesk 12.x / Linux :: Apply DNS Template Changes
Mar 11, 2015I am currently in the process of migrating a few hundred domains from one server to another using Plesk's Migration & Transfer Manager. The servers have the following name servers allocated:
Server 1: ns9.example.com & ns2.example.com
Server 2: ns1.example.com & ns2.example.com
In the DNS Zone Template in Tools & Settings on Server 2, can I just click Apply DNS Template Changes and change all migrated domains NS records to ns1/ns2? Will this affect custom DNS entries as a lot of the domains have DNS changes that need to remain. I'm just hoping that this might be a quicker way than going into each domains DNS zone and manually changing ns9 to ns1.
I just really don't want all the domains DNS zones to reset to the standard template on Server 2 ...
Plesk Automation :: Apply DNS Template
Feb 3, 2015I try to apply my dns template to all dns but it can't work.
I try on the interface and on the command line.
/usr/local/psa/bin/dns --reset [domain_name] -ip [ip]
Plesk 12.x / Linux :: DNS Template For Domain
Jul 2, 2014It seems to me that the panel is not DNS Template for any domain.
Plesk v. 12.0.18
[openvz]How To Create A Simple Template Using Existing VPS
Nov 6, 2008How to create a simple template using existing VPS?
I can create simply compressing the dir of an active VPS?
Example: tar -zcvf template.tar.gz /vz/private/VEID
Provider That Allows Multiple Template Based Sites
Oct 10, 2009I have a friend who needs to setup about 3 websites with a template builder type hosting solution. I personally have space at hostgator, but they only allow their template program (sitebuilder) to be used with your topmost domain, so I cannot refer my friend to hostgator.
Does anyone know of an inexpensive (<$10 per month) host that has some sort of built in sitebuilder/template program that will allow hosting of multiple sites running the template application under the same account?
Change Email Address In DNS Zone Template
Apr 4, 2007When I load a new account into WHM a pre-figured email address is entered into the DNS Zone automatically using the DNS Template field %rpemail%
Can you tell me where the email address %rpemail% can be found and how to change it.
Also can I change %rpemail% to something else in that field so that the email address it calls up is perhaps the contact address for root or similar?
Plesk 12.x / Linux :: VPS Template - User Already Exists
Feb 10, 2015I've been messing about a lot recently and I've had to rebuild my VPS template a lot in the past month. For some reason, Plesk is finding user data from a bunch of previous instances, so I've got to a point now where it's saying users exist when they can't be found in the panel interface.
I don't know how my VPS provider's infrastructure works but I'd presume that when I rebuild the server it's a total new instance and no data should carry over.
Is the the user data stored locally, and how would I go about clearing out the obsolete data?
Plesk 12.x / Linux :: Inbound TLS Due To Standard DNS Template
Jul 17, 2014With the standard-DNS-Layout every customer has an MX-entry like MX 10 mail.customerdomainexample.com
The problem is, that inbound mailservers get a TLS warning, because the mailhostname does not match mail.companydomainexample.com, which is the domain with a valid SSL-Certificate pointing to the same server.
Wouldn't it make sense to change the default template to mail.companydomainexample.com since it is the same machine anyway?
Plesk 12.x / Linux :: Reseller Custom DNS Template
Apr 2, 2015Is there a chance to change the default nameserver name for customers created by a reseller.
Example:
System wide default
ns.provider.de
ns2.prodiver.de
ns3.provider.de
Now the reseller wants:
ns.reseller.de
ns2.reseller.de
ns3.reseller.de
The NS-Entries of the reseller may be the same physical nameserver, but it should be anonymized. How can I achieve that?
Plesk 12.x / Linux :: Error While Recreating Template
Sep 3, 2014I disabled the reverse proxy and i got following error:
Code:
Fehler: Aufgrund von Fehlern in den Konfigurations-Templates konnten keine neuen Konfigurationsdateien für den Apache Webserver erstellt werden: Template processing failed: file = /opt/psa/admin/conf/templates/default/server.php, error = Template_Exception: syntax error, unexpected '=>' (T_DOUBLE_ARROW)
file: /opt/psa/admin/plib/Template/Processor.php
[Code] ....
Now I got the problem that i can't create the /etc/apache2/plesk.conf.d/server.conf
Plesk 12.x / Linux :: Host Template Only For One Vhost
Aug 13, 2014edited /usr/local/psa/admin/conf/templates/custom/domain/nginxDomainVirtualHost.php and add this include hhvm.conf; and work but it's possible to edit this setting only for one vhosts? I must enable only for one vhost because i have some php script not work with hhvm
View 3 Replies View RelatedPlesk 12.x / Linux :: FTP Account - Username Template
Feb 7, 2015I am now encountered the problem, in which a user wanted to create an FTP account that is already in use by another user.
Is there a kind of template / mask in which you can optionally specify the user name style.
If the user is set up, but it creates the system user name, you could not let this might Automatically set before that?
Plesk 11.x / Linux :: Template Processing Failed
Apr 23, 2015We have a problem with our plesk servers. I executed "/usr/local/psa/admin/sbin/httpdmng --reconfigure-all" and now the plesk interface shows an error message:
Template processing failed: file = /opt/psa/admin/conf/templates/custom/server.php,
error = Template_Exception: Incomplete metainfo, domainId undefined.
file: /opt/psa/admin/plib/Template/Processor.php line: 27 code: 0
[Code] ......
I found out that all domain configs were generated correctly, but the psa database shows an error (select * from Configurations where status = 'error'; ) for file /etc/apache2/plesk.conf.d/server.conf.
Plesk 12.x / Linux :: Command Line CLI DNS Template Changes Warning
Jul 23, 2015I'm using this script as a cron to generate DKIM keys for the domains I have. It's an easy script. And it does it's job just OK. I have the necessary software installed and configured.
The way it works is:
The script check if the domain in queue has a record for it. If it doesn't, OpenDKIM generates a one time DKIM record for mail._domainkey that I am entering to my dns records for all the domains I have.
After creating the DKIM record, it checks and deletes mail._domainkey records if there's any. Then adds the generated DKIM to plesk dns zones and disables/enables greylisting to create the appropriate dns entry.
If it does have a DKIM recors on the hdd already, then it removes
mail._domainkeyand
TXT o=-entries.
After that it basically adds the already generated DKIM record and it disables/enables the greylisting for each domain in order to recreate "TXT o=-"
Up till here, it works fine. I can see these entries when I check the DNS Settings. They are there.
But whenever I run this script either via cron or manually, I get an error message on my panel: (You can check the screenshot as well)
Code:
Warning: The DNS zone was modified. If you would like to apply DNS template changes to this zone, either click the 'Apply DNS Template Changes' button on this page or choose the 'Apply the changes to all zones' option in Server Administration Panel > Tools & Settings > DNS Template Settings > Apply DNS Template Changes.
And unless I manually click "Apply DNS Template Changes" for EVERY SITE it doesn't go away.
So, I was wondering, is there a way to scriptize that command? Or how to prevent it?
This is the command I use to generate DKIM and add it to Plesk database, also if any such record exists, delete and re-write it:
Code:
#!/bin/sh
ADMIN_PASS=`cat /etc/psa/.psa.shadow`
MYSQL_BIN_D=`grep MYSQL_BIN_D /etc/psa/psa.conf | awk '{print $2}'`
mysql="${MYSQL_BIN_D}/mysql -N -uadmin -p${ADMIN_PASS} psa"
query="select name from domains;"
domains=`echo $query | $mysql `
for i in ${domains}; do
echo "Processing $i"
[Code] ....
Plesk 12.x / Linux :: How To Create Custom Application Template
Jun 23, 2015Plesk Applications Installer. I wish to create my own WordPress template (with preinstalled plugins/themes) for my customers.
Is there an easy way to do this (or anyway to do this)?
Plesk 11.x / Linux :: How To Update DNS Template To Remove Domain
Aug 19, 2014I want to use the Panel as a Master DNS Server.
1: Obtain two Nameservers. ns1.maindomain.com, ns2.maindomain.com. (Completed)
2: Glue the Nameservers to the server's IP addresses. 1.1.1.1 -> ns1.maindomain.com / 2.2.2.2 -> ns2.maindomain.com (Completed)
3: Successfully register domain and make sure it's pointing to the correct server. (Completed)
4: Register new domain (client.com) to server using ns1.maindomain.com & ns2.maindomain.com as it's nameservers. (Problem)
Reason: Can't edit the template correctly due to a suffix .<domain> that I cannot get rid of.
In order for me to use (ns1.maindomain.com) and (ns2.maindomain.com) as the namerservers for client.com, I'll need to be able to edit those fields entirely. I don't want Plesk to append the client's domain name to the NS record.
This may be a very simple thing to remove, but I give up.
