Provider That Allows Multiple Template Based Sites
Oct 10, 2009
I have a friend who needs to setup about 3 websites with a template builder type hosting solution. I personally have space at hostgator, but they only allow their template program (sitebuilder) to be used with your topmost domain, so I cannot refer my friend to hostgator.
Does anyone know of an inexpensive (<$10 per month) host that has some sort of built in sitebuilder/template program that will allow hosting of multiple sites running the template application under the same account?
We have a PPA environment with 7 service nodes (one management node, two web-, two database- and two e-mail servers). We also have 2 variants of hosting, a consumer and business variant.
We want separate the consumers from the business variants on the service nodes.
I want to use webserver1, databaseserver1 and emailserver1 for consumer hosting and webserver2, databaseserver2 and emailserver2 for business hosting
I want to make two service templates, one consumer and one business template.
Is it possible to configure ppa : When we subscript a consumer template, everything must provision only on the consumer service nodes automatically (web01, db01 and email01) and not on the business services nodes.
I have been with Virpus for several months and have been very satisfied with the service in the last two months. Unfortunately, Ken has decided to discontinue Xen service and I need to find a new home. My basic needs are as follows:
Support: 7x24 (with less than 3 hours average resp. time) Memory: 1GB+ with swap Bandwidth: 500GB+ Storage: 50GB on RAID #IPs: 4 (justification will be provided) Platform: Xen OS: Centos (preferably 64bit) Cpanel/WHM (not required)
and the usuals such as HyperVM, root access, reboots, OS reloads. Thanks for all the replies.
For some reason, my IPs that we use for a IP based site are un-pinable (ping time out) after some time. However, when I restart apf (firewall) the ip are back again and are pinable again.
We added the IPs for the IP based site over the ensim panel.
I belive its a Firewall issue, does anyone know how to check why the Ips are always getting un-pinable?
i currently have 2 webhosting providers but want to consolidate to one acct at one host with a bit better load times...
1. JaguarPc - i have two accts with them
a. i have a shared acct with them currently - i believe its called the gigadeal (something like $10 a month). i have been with them since 2000, pretty decent host not too much downtime. support is "ok" when needed. currently i have 3 smallish websites hosted on this one acct, they dont get a lot of traffic. two of them are using wordpress one is just a static html site. i did a look up and found the server has about 130 sites hosetd on it. so not too bad in regards to overselling. however my big problem is the site takes about 900-1500ms to generate a page. this seems to be pretty often. again the sites dont really draw that much traffic. so thats not the problem here.
b. i also have one of their freedom vps accts with upgraded ram and bandwidth. i only have one site hosted on it. this site used to get about 500K+ unique visitors a month. at its peak we were serving around 1tb bandwidth a month... i know we ran the vps hard but considering we wanted to stay under $50 it worked well. there was of course some downtime due to the massive traffic - [we serve up a popular flash cartoon website].
2. Hostgator - babygator plan this host only serves up one wordpress site - the site isnt very well known yet, but the site is growing each month. the funny thing is that when i looked up this server there was about 830 websites hosted on it - obviously oversold and crowded. support really sucks here imho. however, the page load time is anywhere between 250ms to 500ms a lot faster than JaguarPcs. which is crazy since jag has much less sites on the server... im looking to basically consolidate the websites that are on both shared plans. my original thought was to keep them all on my shared hosting acct at jaguarpc (the one with the 3 sites). obviously i cannot add them to the vps since its pretty active. also the vps is business and the other sites are all personal. and i dont want them to mix so to speak.
i am currently spending about $20 a month between the two shared host plans. im looking for some recommendations as to where to move -- where speed isnt such a big problem, and i can maintain one acct. it would be great if i could host these sites all for around $20 - hopefully without much lag.
was thinking mediatemple - but after reading so many negative posts here about them - im not sure...
Just getting started with IIS on Windows XP Pro. One thing I have a question about is why don't I have an option to 'create new website' when I right click on the Web Sites node? Am I only allowed to use Default Web Site? Also, I know it's not a rights issue because I'm logged in as administrator.
I'm looking at IIS on our server which has Windows Server 2003. On that machine I can create multiple web sites by right clicking on the Web Sites node? Is this just not an option with XP Pro?
I currently have few websites hosted for few of my clients over different hosting providers which include from godaddy to other small hosts. I have been thinking about switching them over to a VPS.
After reading lot of threads on the WHT forum, i have decided to stick with wiredtree. Now for the questions.
1. Wiredtree is a managed VPS server right? that means they install the OS and apache and other applications that are essential to running a site. (not talking about blog software and stuff just basic server software)
2. Do i need to have a Reseller software that lot of them are providing for billing and stuff? I bill my clients myself and take the money upfront. There are no monthly billing and stuff. I dont want to sell the hosting to anyone else then the clients that i pick. Keeping this in mind do i still need the above mentioned software.
3. If i dont get the reseller software for billing and stuff, can i still host multiple websites and have their own control panel and stuff. Basically i want to give every client a username and password where they can log on and add/remove mail accounts, create ftp accounts and etc.
4. If i dont have the reseller software can i still specify different configurations options for different clients, like client 1 has 4gb of space and 50gb of bandwidth?
Right now I have maybe 6 personal sites that I keep on my new VPS. They are mixed together in the public_html file. Ex: coolsite.com and anothersite.com are found in public_html/coolsite/ and public_html/anothersite/ so the result is somewhat messy with many folders. What is the proper way to add sites so I have access to each site separately so it is not so cluttered? Or am I doing this right?
I have three sites running on three separate servers behind a single router with DDWRT. One of the servers is a Windows 2003 server that I have DNS running on.
Each domain name points to my public static IP address.
My router is set to use the windows 2003 server as the DNS server.
I have port 80 forwarding to the windows 2003 server.
I can access the sharepoint site that is on the 2003 server from outside my network and within it without any problems.
When I try to access one of the other two sites from outside the network, i get a 400 error. When I try to access the same sites from within the network, they work fine.
i have about 80 domains with godaddy and about 30-40 with 1and1. i have two hosting packages with 1and1 a "home" package and a "business" package. i have a main site up on the business package right now. the home package has tons of files from an old forum that really could just be wiped out.
My question is that i have a few sites being developed right now. 3-4 to be exact, can i host them all on the same package? i want each to not be a sub of anything. What do i do? Calling tech support yielded worthless answers. Do i need a different type of account?
I am starting a small template based company. How many unique websites in their own unique folder can I host on a single server?
These websites would not get many hits, maybe a few hundread to a few thousand a month per site. My goal is to minimize the number of accounts I will have to open up with a web service provider.
Should I purchase 1 package per site or is there a way to get around this. Each unique site would have its own unique domain.
I have been tasked with setting up IIS6 to run 10 different sites. We will be using the Host Header Names approach as I do not have 10 IP addresses. I want to allow clients to upload/download to their site via FTP. My IIS6 books have examples of how to setup separate FTP sites for individual IP addresses, how do I accomplish this when using Host Headers? I just need to be pointed in the right direction.
I am using Windows Server 2008 R2 with Plesk 12.0.18 Update #25 with single IP address assigned to the server.
Is it possible to do the following with only 1 IP address:
-Host 4 shared hosting websites on the same IP but also use the same IP address to install and setup a shared SSL Cert. for hostname AND for 1 of 4 hosted websites ...
I host about 30 sites for clients who don't want to manage their own hosting. All of the sites are low-traffic. Almost all use FrogCMS or Wordpress /w minify and cacheing options. All of my clients use Google Apps for email.
I guess I'm looking for a reasonable host (nothing unlimited) more storage than ASO would be nice - I'm looking from something from $10-20 monthly and I can purchase for a year at a time.
Sharkspace, downtown host and host gator seem a little "dreamhost-like"... but have good reviews.
Also, I'm in Montreal so a datacenter on the east-coast would be nice
the subject pretty much sums it up, is there a method or solution for multiple websites (whic reside on the same dedicated server) to share just one .htpasswd, or automate the mirroring of said .htpasswd file?
if so any suggestions for methodology or products that would facilitate this action would be most welcome, thx in advance friends..!
I have about 5 sites all hosted on my same hosting account. One of those domains is attached to the hosting account. I place my other domains in a folder of a sub-directory of my main domain. This has been working fine, up until today when i noticed a weird error. I give you a little example of how my sites are setup
my main domain: www.maindomain.com
My other sites hosted in a sub-directory of my main domain: www.maindomain.com/sites/site2/ www.maindomain.com/sites/site3/
How my other sites appear on the web: www.site2.com www.site3.com
This works fine for every page until i go to www.site2.com/index.php It redirects to www.maindomain.com/sites/site2/index.php for some reason
I have a task of converting a current Win Server based apache server from multiple IP based virtual hosts to a full name based virtual hosting.I'm famiilar with the steps but I was wondering if there are any gotchas in Windows that I should be aware of. It seems that now matter what I change in the new config it doesn't work or work as expected.
I have two domains as virtual hosts on same IP address.
I am getting certificate error for the second domain when I try to check email (using MS Outlook). I can't permanently "accept" certificate, it complains again and again. Certuficate I created and self signed for imap.domain1.com, but the second email server is imap.domain2.com, so it complains.
How do I set separate email certificates for two domains? Is it possible at all?
i saw a website template that i would like to purchase. i can change the contents of the template to whatever i like. i can also register a URL and have it hosted. my question is..... how do i get the template to show on the URL? do i need to know HTML?
I'm having Virtuozzo vps template issues (now known as "Parallel").
I downloaded the ubuntu ez template and ran the below accordingly after wget'ing the template files in root mode of the *node*
vzpkg create cache
It was going just fine, until this in the end
Quote:
Selecting previously deselected package console-common. Unpacking console-common (from .../console-common_0.7.68_all.vz.deb) ... Selecting previously deselected package screen. Unpacking screen (from .../screen_4.0.3-0.2ubuntu2_i386.vz.deb) ... Selecting previously deselected package vim-runtime. Unpacking vim-runtime (from .../vim-runtime_1%3a7.0-164+1ubuntu7.2_all.vz.deb) ... dpkg-deb: unexpected end of file in between members in /vz/template/ubuntu/7.04/x86/apt/archives/vim-runtime_1%3a7.0-164+1ubuntu7.2_all.vz.deb E: Sub-process /usr/bin/dpkg received a segmentation fault. ERROR: /usr/bin/dpkg error, retcode=100
I also get this error on a second vps node:
Create cache for all uncached OS templates... Debug: Using temporary VEID 10000001 Debug: Mounting VE private area E: The method driver /usr/lib/apt/methods//download/mirrors/fedora-core-7 could not be found. ERROR: Can not load mirrirlist(s): /download/mirrors/fedora-core-7 ERROR: Can not get yum configs for fedora-core-7-x86 OS template
Depending on where u are at on my site (documents pages, training, main root, etc.) will depend on which type of background, footer, header and the like you'll get. Now I was thinking. Is there a way to have multiple error messages for more then one page depending on where you are at on a site? Right now it's intranet site and a modded snitz forum. What is the code and were does it go and in which apache conf file(s) does it go in?
When attempting to create a new vps container using Ubuntu 7.0.4 ez-template in VZMC, I get this:
The following error(s) were detected:
Description 1004 Error during VPS 106 creation: Error invoking vzctl utility: Creating VPS private area (ubuntu-7.04-x86) Cached package set /vz/template/cache/ubuntu-7.04-x86.tar.gz not found You probably need to run 'vzpkg create cache' Creation of VPS private area failed I ran vzpkg create cache again and getting errors... Unpacking console-tools (from .../console-tools_1%3a0.2.3dbs-65ubuntu3_i386.vz.deb) ... Selecting previously deselected package console-common. Unpacking console-common (from .../console-common_0.7.68_all.vz.deb) ... Selecting previously deselected package screen. Unpacking screen (from .../screen_4.0.3-0.2ubuntu2_i386.vz.deb) ... Selecting previously deselected package vim-runtime. Unpacking vim-runtime (from .../vim-runtime_1%3a7.0-164+1ubuntu7.2_all.vz.deb) ... dpkg-deb: unexpected end of file in between members in /vz/template/ubuntu/7.04/x86/apt/archives/vim-runtime_1%3a7.0-164+1ubuntu7.2_all.vz.deb E: Sub-process /usr/bin/dpkg received a segmentation fault. ERROR: /usr/bin/dpkg error, retcode=100 CentOS release 3.6 (Final)
