How To Install Zend On C Panel Server
Feb 21, 2007i got one cpanel server need to install zend optimizer, what is the command to do so?
View 6 Replies
ADVERTISEMENT
How To Install Zend Optimizer
Jan 22, 2007how to install zend optimizer? I have downloaded it and uploaded the files to my server...
View 4 Replies View RelatedZend Optimizer Install
Jan 15, 2007My server currently has zend optimizer v2.1 installed, but I need to upgrade it to v2.6 or higher. I've downloaded v3.2 from Zend as a '.tar.gz' file, but I have no idea how to install it.
I'm running Plesk 8 with PHP v5.2
Does anyone have experience with this?
How To Install Zend Optimizer
May 6, 2007Could not find a tutorial for this here so here it is.
1) First off you’ll need to grab a copy of the optimizer depending on what platform you would like to install it on. you can find it at zend dot com
Linux users should grab the Linux glibc2.1
2) Once you have downloaded the file locally you’ll need to upload it to your web server. FTP to your server and upload it to a directory of your choice. It’s to bad that Zend had to make it so they couldn’t provide us with a direct download so you can’t wget the file directly from the server… a bit of a pain.
3) Uncompress/extract the file
tar zvfx ZendOptimizer*.tar.gz
cd ZendOptimizer-2.5.3-linux-glibc21-i386/
4) Now run the installer,
./install.sh
5) Now follow the instrustions on the screen.
6) Ensure that Zend Optimizer is working you can do the following in the shell.
php -v
You should see something like this for output:
PHP 4.3.8 (cgi) (built: Sep 1 2004 17:00:35)
Copyright (c) 1997-2004 The PHP Group
Zend Engine v1.3.0, Copyright (c) 1998-2004 Zend Technologies
with Zend Optimizer v2.1.0, Copyright (c) 1998-2003, by Zend Technologies
7) After the installation is complete you can remove the directory.
cd to where the extracted Zend first.
rm –rf ZendOptimizer-2.5.3-linux-glibc21-i386
Plesk 12.x / Linux :: How To Install Ffmpeg On Server With Control Panel
Aug 21, 2014I have server with the Plesk control panel on Linux server and want to install ffmpeg but not sure about the steps to install it. Any script or easy steps to install ffmpeg on my server.
View 1 Replies View RelatedHow I Can Install Xcache With Zend Optimizer V3.3.3
Apr 6, 2009how can i install xcache with Zend Optimizer v3.3.3 to together ?
because when i install it together the php not working on my server
i install only xcache but i need Zend with him.
the php modules
Code:
[PHP Modules]
bcmath
calendar
ctype
curl
date
dom
filter
ftp
gd
hash
iconv
imap
ionCube Loader
json
libxml
mbstring
mysql
pcre
posix
Reflection
session
SimpleXML
sockets
SPL
SQLite
standard
suhosin
tokenizer
XCache
xml
xmlreader
xmlwriter
zip
zlib
[Zend Modules]
XCache
the ionCube PHP Loader
How To Install A Zend Optimizer In Ubuntu
Mar 22, 2008How to install a zend optimizer in ubuntu?
View 3 Replies View RelatedInstall Zend Engine V2.0.4-dev On CPanel Box.
Mar 15, 2007Actually i have PHP 4.4.5 + Zend Engine v1.3.0.
One of my customers needs Zend Engine v2.0.4-dev installed.. this is a RHES 4 + cPanel box..
Does anyone know how to install/upgrade Zend Engine v2.0.4-dev?
May this change cause some problems with PHP Scripts?
Install Ioncube In User/local/Zend
Jun 11, 2007i upload all files ioncube in /user/local/ioncube and go to user/local/Zend/php.ini and in end add zend_extension = /usr/local/ioncube/ioncube_loader_lin_5.2.so
but don`t work.
Trying Install DKIM On A RHEL4 Box With No Control Panel
Jul 1, 2008Trying install DKIM on a RHEL4 Box with no control panel and only one domain on the box. Let's call it DOMAINNAME.COM with IP 999.99.99.99
DKIM seems fine, but I have having difficulties with the DNS portion.
DNS is NOT handled by this box. I have DNS control on another box for this box.
I have successfully installed the following SPF Record in the DNS Zone File:
DOMAINNAME.COM. IN TXT "v=spf1 a mx ptr ip4:999.99.99.99 mx:mail.DOMAINNAME.COM -all"
From the [url]I need to add another line to the zone file. So I added:
dktest._domainkey IN TXT "k=rsa; t=y; p=MFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBAMK+ItLAy3VWNhuZHZ/iF51.....
zeZnksVUnGtk224tQASKXijuHTyhptKdpedvH+TWESeTUFgzZWjEFGcCAwEAAQ=="
It then says you can run "dig +short dktest._domainkey.DOMAINNAME.COM txt" and receive the results. Everytime I run it, it returns nothing. I have even waited 24 hours and still get blank returns.
Since DNS is on another server, would this "dktest._domainkey" section need to be changed to "dktest._domainkey.DOMAINNAME.COM"?
Can I run both the Domainkey record and SPF record together?
Plesk 11.x / Linux :: Install Anti Virus And Get It Work With Panel?
Nov 9, 2012I like to use an other virus software for scanning mails. e.g. clamav I found an old HowTo on [URL] .... but this not work with panel 11.
Is it possible to use an other antivirus software like clamav, sophos, eset, or ... ?
IonCube - Zend Together -> 500 Internal Server Error
Jun 17, 2007Zen optimizer is installed my server, when I try to intall ioncube, all php sites goes down and I get Internal server error, Ioncube and zend dont work together?
and if it s possible to intall ioncube for single site in shared host?
Plesk Vs. C-Panel / Control Panel
Oct 11, 2007I indicated that I've basically been using my webhosting company as "file storage".
1) I create all my files in .html using notepad
2) My files are limited to .html, .jpg, .gif, (and a couple of .js and .css) files.
3) My domain is not connected with my webhost; I use the nameserver zoneedit.com and I use URL forwarding and mask/cloak the domain the address bar (using multiple domains) as follows:
domain1.com --> forwards to [url]
domain2.com --> forwards to [url]
domain3.com --> forwards to [url]
4) For uploading files, I go to ftp://123.456.78 and drop/drag/copy/paste files into the window using my browser
5) I'm able to password protect the subdirectories as I choose.
---------------
I called my webhost, Hostik, and told them that I was unable to do anything on my web console. I can't change a password, create a user, or even access my usage/bandwidth quotas.
They told me that I'm on an "old server" using the windows-based console (probably C-Panel / Control Panel) and they're in the process over the next three months of transfering everyone over to "Plesk".
So, they set me up with a new Plesk account, while keeping the old one in place, so that I could move/transfer my files to the Plesk account.
When I went to Plesk, I realized things are not the same:
1) In my Control Panel / C-Panel, I had a unique IP URL Address - [url]
2) In Plesk, it seems there's a set IP URL Address - [url] - that everyone shares.
3) I was told that in Plesk, many people use that IP URL address and that I'm supposed to place my files into the "httpdocs" folder.
Appearently, this is a system of shared hosting whereby many people have the same IP URL address (different from what I had before) and it recognizes each account by the login or something, so the "httpdocs" folder would identify my domain.
I was then told that in Plesk, I must have my domain affixed to the Plesk account.
In other words, I can no longer do what I was doing before, having my domain separated in another location and using URL forwarding from an outside nameserver.
--------------------------
So, my original question is what's the difference between Plesk vs. C-Panel/Control Panel?
Perhaps I answered most of it above.
Is it correct that I can't do things the way I've been doing them so far if that's the case?
It might be that Plesk is not for me and I may need to find a host that gives me my own unique IP URL Address. However, I was informed that not many companies are doing that as most are switching over to Plesk.
In addition, Hostik does not offer multiple domains.
In response to this thread, David recommended I try synhosting.com
synhosting.com has "Multiple Websites". I assume this means mulitiple domains. Correct?
What's my best option at this point?
1) Find a host that has C-Panel / Control Panel (if any there are)?
2) Use a service such as synhosting.com and move all my domains over to them?
3) If I do use synhosting.com, am I required to move my domains over to their nameservers?
4) I have my MX Mail records pointing to Fastmail.fm for my email virtual domains. Would I still be able to do this if my domain is dedicated to a webhost and opt not to use their email feature?
5) Should I get rid of this old-school thought of using my web host as "file storage" and stop this practice of using URL forwarding and cloaking?
Best OS - Control Panel For Email Only Server
Mar 30, 2008I am using VPS for my general hosting, but have considered putting together a machine for an email server to host some email accounts that I currently don't have on my VPS accounts and would want tighter security than VPS offers (hosting company/support having access to VPS).
While I have gotten more comfortable with linux during the last 5 months I have been hosting on a VPS, I still prefer a control panel type interface. I am using WHM/Cpanel currently. I know that I cannot get a Cpanel license for the type of server I want to put together, so is there either a linux server distribution with a good gui interface, including email setup and admin, or is there a control panel other than cpanel that is either free or inexpensive to use on a dedicated email server.
I will house this email server on my 6mb/768k DSL line at home, or at work on a 4xT1 (6MBs).
Backup Server Control Panel
Jan 7, 2007I am in the process of getting my new colo setup going. My initial colo is on a per server basis so I don't need a switch right away. I am however going to add a switch so I can have my servers connected privately to a backup server in the same rack. On this backup server, what is the best type of "system/control panel" to use to setup the backup accounts for each of my servers? I could just create accounts manually via the Linux command line, but curious if there is a good way to do this (Webmin maybe?). Of course this server will not be accessible from the internet, it will be on the "private" network and accessible from the other servers.
How are those with a similar setup doing this?
Nameserver On Server W/o Control Panel
Feb 27, 2007I'm used to setting up the nameserver using a control panel (directadmin)
but how do you do it on a server without a control panel?
So far I figured that you just
set up 2 ip addresses in your registrar to use as nameservers
and then
edit /etc/named.conf and put the path to the zone file and of course set up the zone file /var/named/nameofzonefile.db
then service named restart
are these steps correct? am I missing anything?
Best Control Panel For Multi-server Setup
May 6, 2009My host and I discussed over a month ago the possibility of adding on another server so that I can use one for MySQL and the other for web, and eventually as my sites expand add a third one so that two balance the loads and the one will be dedicated just for MySQL.
Well, it's been a month now and I have had a server dedicated for MySQL and the other one dedicated for web set up. A month has gone by and my host and I are having problems setting it up - I have not been able to use the new server and have already had to pay the bill when I have not been able to use it for its purpose!
The old server was supposed to act as the MySQL while the new server was supposed to be for web. We are having so many problems trying to set this up, well at least my host is, and I am becoming more and more frustrated as the days go on because I am paying for the new server that I can't even use because it's not set up properly.
I am using DirectAdmin control panel and linking them is a pain in the butt. I linked my host to this article, but I don't think he's implementing what is being instructed to do:
[url]
The new server is still not working properly with the MySQL server and I have no idea what to do here. I have already paid for a month's service for no reason and now I am starting to feel robbed because this process is taking so long.
I am willing to switch control panels if it will speed up the process. Does anybody know of any control panels that will be better suited for my need? I'd ideally like to simply manage both servers in one control panel - under one license - and manage each server's services and most importantly the MySQL and it's databases on the dedicated server for MySQL.
Hosting Server / ISPconfig2 Control Panel
May 17, 2009I installed Centos4.7, now i am installing the ISPCongif2 but at the last step after configuring the ssl, i was asked to enter my host and domain, but it gives me error the url is not reachable.
The domain is not hosted anywhere but i created an entry for it in the /etc/hosts
[root@serv ~]# cat /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.112.41 serv.mynewdomain.com serv
192.168.112.41 mynewdomain.com
Do i have to make anychanges on any configuration files?
Here are the steps i did to setup this server:
1- I purchased an ip 64.xx.xxx.xxx from my ISP provider.
2- I installed centos4.7 on my PC.
3- Installed the webmin.
4- On the router i pointed the 64.xx.xxx.xxx to 192.168.112.41
what are the steps please i need to follow to get this server running?
Best Control Panel For Windows 2003 Web Server
Jul 7, 2008Whats the best Control Panel for Windows 2003 like cPanel except from thats for Linux but i want a Control Panel for Windows 2003 Web Server. I know their is Plesk & HELM but is their anymore and which is the best one?
View 14 Replies View RelatedInstalling A Control Panel On Already Working Server
Apr 22, 2008We have a dedicated server with domains already setup and everything.
The guy who used to run it for us has left and it appears it was all done via SSH and command line - we don't have that level of skills.
Is there a way which we can:
A) install a Control Panel and administer ourselves
B) Migrate all the domains to a new dedicated server with an existing control panel.
Unmanaged Server Control Panel Installation
Jun 19, 2008We may soon get into the unmanaged arena. Recently there has been debates on whether an unmanaged server should come with anything other than a bare OS, even if ordered with a control panel. I'd like to get a feel for what you as a customer expect from an unmanaged host when ordering a server with control panel.
View 10 Replies View RelatedTutorial Request For Non Control Panel Server.
May 13, 2007write a tutorial how to set up a server without a control panel. A step by step guide how to set up the dns, add doamins. create accounts, create ftp users, create databases, create db
View 4 Replies View RelatedFree Control Panel For Server 2003
Mar 2, 2007what my options are for a free control panel that is operable on windows server 2003.
View 14 Replies View RelatedFavorite Control Panel For Installing In A VPS/cloud Server?
Oct 9, 2009What's your favorite control panel for installing in a VPS/cloud server?
View 14 Replies View RelatedPlesk 12.x / Linux :: Redirecting To Server URL For Login To Panel
Mar 25, 2015How do they redirect to the Server URL in CPanel.
Eg. <Domain.tld>/cpanel
I looked for directory called /cpanel but non-exist.
I wish to use the same method to redirect to Plesk Panel <Domain.tld>/ppp if possible.
Plesk 11.x / Windows :: Control Panel Access IIS 7.0 WIN Web Server 2K
Jun 29, 2012after upgrading to plesk 11 i get this error (Image attached)
so basicaly i cant do nothing..
Plesk 12.x / Windows :: Icewarp Merak Mail Server And Panel
Jul 16, 2014I have a merak mail server with a lot of domains and users. I have installed a plesk 12.0 on a new windows 2012 r2 server together with a fresh installation of merak . Now I want to import all domains and users from my old merak server to my plesk server, but I can't figure out how to do it. I can import them to the installed merak mail server on the plesk server, but I can't find a way to import them into my plesk.
View 6 Replies View RelatedPlesk 12.x / Windows :: Database Server Warning After Panel Upgrade
Jun 23, 2014After Plesk Panel upgrade to 12.x I found a warning showing at Home>Tools & Settings> Database Servers
Warning: Unable to determine the TCP port number used by Microsoft SQL server '.SQLEXPRESS': TCP/IP protocol is not enabled in the server network configuration or the server is configured to use dynamic TCP ports.
To allow your customers to automatically configure firewall for remote database access, manually configure the SQL server to listen on a specific fixed TCP port.Click to expand...
Plesk 11.x / Linux :: Admin Panel - 500 Internal Server Error
Oct 29, 2014I have experiencing strange behaviour of Plesk admin panel. Actually there were a lot of issues similar with 500 Internal Server error but mine is a bit different..
This is the log came from the '/var/log/sw-cp-server/error_log'
/bin/sh: /usr/share/sw-cp-server/applications-conf.sh: Permission denied
Cannot find config item ["global/SERVERsocket==:8443", ".php", 0]
2014-10-29 19:38:22: (mod_fastcgi.c.1068)
[Code] ....
As you can see there is a line starts with /bin/sh: /usr/share/sw-cp-server/applications-conf.sh: Permission denied and i tried to change this one for permission like 0755 or alternatives for a run but nothings changed. Btw i have plenty of disk space, it wasn't also the case.
I cannot even login with my domain name without 'https' and with the port 8880. It's again giving me the same issue.
BTW i want to give a little extra information; it was a long time that Plesk admin panel working but after today it's stuck in 500 Internal server error. What i tried today that to follow 'How to generate custom self-signed SSL certificates and apply it to Postfix: [URL] ....' , but after 6th step i was decied to stop because i couldnt find the root.pem file a minute and than i wanted to try on plesk and i saw the bad news I don't know it was related but i wanted to share.
Plesk 11.x / Windows :: Panel Not Sending DNS Notifications To Slave Server
Mar 21, 2014If I change DNS using Plesk Panel the DNS server does not send a notification to the slave server, however if I change DNS directly through the DNS Manager it does send the notifications. Looking around the only thing I can find is an old post [URL] .... I'm not sure if this is related.
View 7 Replies View Related