I currently have 256MB RAM on a VPS. I was wondering, if I upgrade to 512MB RAM will that increase load times on my website?
If so, should one expect the load times be significantly greater - maybe twice as fast?
I've recently moved server and since then I've had a problem with the main site I administrate. The problem is that when I'm moving around the site I frequently get long lag times between clicking on a link and getting to that next page. This isn't slow transfer speeds - the status bar shows 'waiting for xxxx' for sometimes 15 to 20 seconds. The site makes quite heavy use of a MySQL database and associated forum software.
It was suggested I did some tracerts to see what that showed. The thing is I don't know what the significance of tracert results are! It seems to show lots of timeouts - but then it shows lots of timeouts when I try it on other sites as well, which don't have the same lag problems.
I have no reasons to think it's my host, who are really good and responsive. But my ISP says it's nothing to do with them either. If the routing is a problem, where lies the responsibility for selecting the routes between me and the server to my site?
I'm hoping this is just the link between me and my site, as other site users don't seem to have had a problem yet. I'll post a couple of tracert results in case anyone is able to advise me on what their significance might be.
How can i know which site cause load in my server?
View 9 Replies View RelatedI have a growing website that needs to move from its current single-server setup to using a cluster of servers to deliver its dynamic pages.
My current host does not support load balancing among its servers, so I'm left to configure that on my own. Round-rovin DNS doesn't work for me as I'll need certain http requests to always go to the central server (the one with the master database).
My distro is Redhat 9, and I only access the server remotely through SSH. I'm using Apache 2 (and PHP and Mysql).
Any ideas on the simplest way to do this?
I've read a bit about LVS (http://www.linuxvirtualserver.org/) but it seems to require a kernel recompile, which is way beyond the things I would dare to try...
I recently put up a website and after about a week, I suddenly can not access it. The site went down after the host had a problem with the http on the server and it never came back for me but it works for everyone else. It times out while trying to connect in both the web browser and FTP client. The problem appears to be related to my internet connection, because the site won't load on any computer that is using my internet. When I disconnect from my cable and use my cellphone as a modem, the site works fine. The site works for everyone else that has tried though.
Besides changing my IP address, how do I go about getting the site to work?
i have dedicated server
one site on my server compress to my server
cpu and memory
how i can config that the site use of memory only 2% and ...
My machine is pretty good. Here are the specs:
Intel Xeon-Woodcrest 5148-DualCore
3 gigs of ram
250GB Western Digital WD Cavia
I run a forum with a modest amount of traffic along with a content management system handling the other sections of the website. I'm pretty sure the forum isn't the problem though.
The server load for this machine is almost never above a 1. Right now as I type this the load is at 0.17, but it's unbearably slow! Taking up to 16 seconds to load a single page.
What could be causing this? I'm a server n00b. Is there a setting I should be doing to one of my servers configuration files to make it run faster?
My website gets 30-40,000 visitors a day and these problems always occur during peak hours. It would be easier to deal with this though if not for the fact that the server load is always so low. How is it possible for the site to get so slow while the server load is always so low?
I would just like to no how you would load balance 2 sites. Would this be done via dns settings. EG
instead of seting the domain to something like
ns1.server1.com ns2.server1.com
would it be?
n1.server1.com ns2.server2.com
I have 2 reseller accounts with one provider, and in the last several days I have noticed that when you visit the site for the first time, my AV software detects a trojan on the site, but the code & html files are 100% clean!
I'm suspecting that there is something being injected into the scripts from the server daemons that's either running or something else.
Anyone have any suggestions?
what can make site load faster other than replication
(well lets assume that design wise it is ok and doesnt content heavy contents...)
i have heard that increasing networking speed at the server level can make site much faster...
is it true..?
is there any tweak bandwidth wise...
suppose we get 1tb bandwidth per month compared to 100gb ...
will that make site faster...
we want to host a photogalley site...which is fast or images are shown in faster way....
say i have lot of traffic from USA, does my site load slower if hosted in netherlands or uk?
View 11 Replies View RelatedI have seen 1 vps provider having very poor ping results in few online ping sites and they have a very cluster slow loading pages as well.
One of my friend has a package with them, the ping results are very poor even for him as well. Just made an traceroute found its on some node1.vpsprovider.com
Ya, one more major important similarity noticed was, the vps provider emails weren't set properly to yahoo mail, and my friend's emails sent from the server to yahoo weren't delivered as well.
So if the vps provider has poor content may be due to firewall or internal settings do the systems under the node also be affected?
I have no problems with my host so nothing to be worried about, but need to help him as he is just starting it out with a cheaper vps
we have problem with increase HDD for VPS in vmware
when i increase HDD show this error:
"Reconfigure Virtual Machine" failed to complete OK
If these problems persist, please contact your system administrator.
DetailsOperation failed because file already exists.
I want to edit the nf_conntrack value 'cause I'm being DDoSed and my /var/log/messages says nf_conntrack is full...
I know how ip_conntrack can be modified.. but I can't figure out how to edit nf_conntrack (installed FC 7...)
if there are any additional settings i must edit on apf to work with nf_conntrack please warn me about it.
Is there a way to increase FTP timeouts to 60 minutes within WHM? Otherwise, how would one do it via SSH?
View 5 Replies View RelatedJust received this from cPanel... it is a substantial price increase (33%). Should be fun explaining to customers why they will start to be billed more...
Earlier this year we released cPanel VPS Optimized as part of our ongoing effort to provide quality web hosting automation software. You can learn more about this optimization of our software for VPS environments on our website at:
http://www.cpanel.net/products/cpvps/
In order to provide optimized software and ensure continuous updates for your virtual server customers, effective September 1, 2008 the monthly pricing for all internal virtual server licenses will be increased by $2 per license.
This price increase is for virtual server licensing only and will not affect your dedicated server license pricing.
i have a dedicated server windows 2008
and i created users on the group (remote desktop users)
but only 2 users can join online
how can i increase this?
althogh the cpu is very powerful now,
i feel the sata speed and io is the bottleneck of server,
if we use four SATAII HDs to do raid10,
about the hd performance,
will take how many more than original one sata hd?
I'm considering upgrading our company's server. We run an ecommerce site php/mysql based, we have about 12,000 visitors per day and we use up about 1500 gig per month. Simple ecommerce site, nothing fancy. We had some complains from people that our site is "slow" (despite it running smoothly for us, but these people claimed that only our site was "slow" and that they use fast connections) so that's why now I'm thinking maybe its time to upgrade.
We are using softlayer, for an extra $50 per month they recommended that we upgrade from our Opteron 1216 to "Xeon 3220 - 2.40GHz (Kentsfield) - 2 x 4MB cache"
Are we going to see a serious increase in performance? Will the increase be enough that most visitors will actually be able to feel it?
Anyone else see an influx of fraudulent CC orders with all valid information? Even the IP of these orders matches or comes close to matching the address. What's in common is that email correspondence reveals Asia-based IP addresses and the phone number never checks out.
Could this be due to the recent Network Solutions breach? I've never seen so many fraudulent orders with nearly everything checking out.
I use a VPS with CentOS and LX-Admin. My VPS run only 1 forum phpbb3.0.2 and nothing else.
3 days ago, disk used was 2.6GB, yesterday disk used was 2.7BG and to day disk used is 2.8GB ...
I wonder why disk used of my VPS increase everyday? It's may be because of cache and log? How to clean unnecessary cache and log?
how can you increase the uptime of your server?
can i ask how could you increase the uptime of your server?
We've been considering getting a cabinet at Level3 in Tampa and the last pricing we got was November 2006. Yesterday I spoke with the rep I'd been dealing with to place the order, and was told that Level3 raised their prices substantially as of January 1st.
The quote we got 2 months ago is now a full 30% higher.
Can anyone confirm whether Level3 really did take a fat increase, or am I being hustled?
well now my server load is back to normal i.e 1 - 2
but i want to increase the maxclients limit in my httpd.conf..
when i did 312 and restarted it, it says the max is 256.. so how do i increase the limit
I have an increase in bandwidth for one of my site.
Usually, it average around 6 or 7 gigs per month. This month im almost at 10 gig. In awstats, it report that a spcific ip have used 3.49 GB alone and as 128668 pages view and 128668 hits. Last access was 18th of may.
I have done a IP whois, and it appears that this IP belongs to [url], which is an ISP.
Now, im thinking of all types of things. Is my account serving files for someone? hack?
I'm sending out a mail campaign and noticed that there is a default limit of 300 set somewhere on my server. how do i chance this...
has exceeded the max emails per hour (300) allowed. Message discarded.
Is it possible to add another hard-drive and attach it to increase the size of the /home directory?
Beginning to run out of space.
I have CentOs 5 With LxAdmin
My Current Import Max File in PhpMyAdmin is 8192 KiB
I have Changed Values in php.ini and my.cnf But Still No Luck At ALL, Its Not Working
I can not find anything weird on the server.
Everything seems normal.
Why the traffic go high suddenly, then it drop to normal after a while.
How can I increase/decrease a mail box quota from SSH?
we use cPanel.