Increase Maxclients Limit
Nov 30, 2007
well now my server load is back to normal i.e 1 - 2
but i want to increase the maxclients limit in my httpd.conf..
when i did 312 and restarted it, it says the max is 256.. so how do i increase the limit
View 8 Replies
ADVERTISEMENT
Feb 1, 2007
One of my sites gets around 10k+ visitors a day which has caused my httpd to be really slow.
My MaxClients is set to 250.
What should I do to get it back to normal?
View 5 Replies
View Related
Jun 14, 2009
I'm sending out a mail campaign and noticed that there is a default limit of 300 set somewhere on my server. how do i chance this...
has exceeded the max emails per hour (300) allowed. Message discarded.
View 5 Replies
View Related
Oct 11, 2007
error message: [Warning] Could not increase number of max_open_files to more than 65535 (request: 71410)
in my.cnf, I have this already
open_files_limit=90000
and
#cat /proc/sys/fs/file-max
370603
Is there any idea to fix this error?
View 5 Replies
View Related
Feb 1, 2014
why, or when this happened, but all of a sudden the PHP Memory Limit for all of my domains is 64M? I used to have it set to 128. How to change this setting so that all domains have the ability to go to 128M ?
View 5 Replies
View Related
Jul 14, 2008
How to increase the Open Files limits descriptor in Apache. In the earlier version of Cpanel, we had an option of Raise FD Size Limit to 16384, but the option no longer appear while rebuilding Apache. What is the way to do it and make the change permanent?
View 2 Replies
View Related
Feb 5, 2015
I have tried the links below and it still has not made a difference to the upload limit. I am still getting a 500 error.
[URL] ,.....
In the error logs it is still saying
'mod_fcgid: HTTP request length 16777994 (so far) exceeds MaxRequestLen (16777216)'
I did not try editing last_httpd.include as it was recommended that this was not edited in the post above.
Is there something I am missing!
The Parallels version is 11.0.9 on Linux. It is a VPS package. Is it possible that the host is not allowing the increase or is it all down to my setup?
View 18 Replies
View Related
Nov 12, 2014
I am trying to increase the PHP memory limit for all Plesk hosted sites.
I've updated the 'memory_limit' setting in /etc/php.ini
Then I ran
Code:
/usr/local/psa/admin/sbin/httpdmng --reconfigure-all
/usr/local/psa/admin/sbin/httpdmng --reconfigure-server
Checking a phpinfo() page on hosted sites I see that this setting has not been effective.
Checking some /var/www/vhosts/system/domain.com/etc/php.ini also shows the old setting, and I can see that these files have not been updated.
I note that all these domain php.ini files have been modified earlier today, all at the same time, so presumably some process did regenerate them earlier. All these files hae the "DO NOT MODIFY ..." heading
I realise that I can go the the domain in Plesk GUI and save the PHP settings to force an update, but is there anyway to force the regeneration of all of these files via CLI?
View 3 Replies
View Related
May 27, 2009
im using apache2, and in apache config i set maxclients value is 60.
it mean, my vps will accept only 60 clients at the same time.And when vps have more than 60 clients, all clients over are locked out till my vps have less than 60 connections.
But when my vps had more than 60 clients, apache is crash, ram is not full, and i must restart apache.
View 6 Replies
View Related
Jun 13, 2008
i want to larger the "MaxClients",
i add the MaxClients 1000 in the httpd/conf/httpd.conf and restart the httpd
but it looks likely not work at all,
what should i do else?
my apache is version 2
View 10 Replies
View Related
May 25, 2008
Noticed that our http.conf file only contains MaxClients but not HardServerLimit. Is it because we are running an older version of Apache where the server limit has to be compiled with that set? We are running: 1.3.37
Our management server has set MaxClients to 2000 and it seems to work. Have been doing lots of reading and this number may cause issues when the server spikes in traffic. Most users recommend a number below 500.
View 0 Replies
View Related
Aug 17, 2014
I am using Plesk 12 / Ubuntu 14.04
In PLESK 11 I could set maxclients, ServerLimit ..... in /etc/apache2/apache2.conf
But I cannot find these settings in apache2.conf.
Where to configure these settings, in which file?
View 6 Replies
View Related
Mar 25, 2008
I`m on VPS 768Ram WHM/Cpanel
when i check error log on apache i see that error around 5 times daily.
[error] server reached MaxClients setting, consider raising the MaxClients setting
the apache restart automatically (~3 second). and that the problem when user make downloading all connections CUT.
my httpd.conf
maxclients 150
maxrequestperchild 0
i can increase maxclients no problem but i don`t know if i need to do something else or not.
Is there any way to LIMIT connection ( if server get more than 256 connection it says SERVER BUSY and doesn`t accept any connection )
View 7 Replies
View Related
Jan 8, 2008
Since I upgraded to apache2.2 I dont seem to be able to find the "MaxClients" setting in httpd.conf.
I spent some time on google and aparently this has been taken out because apache2 is multi-threaded. What I do know is no more than about 250 people can connect to my server.
View 13 Replies
View Related
Mar 23, 2005
I am using prefork MPM in apache because we are running php which is not thread safe.
I have a ServerLimit of 500 and a MaxClients/MaxSpareServers set at 500. However, the server seems to be stuck at 352 processes.
Any ideas of why that may be?
View 0 Replies
View Related
Jun 18, 2015
I am using apache 2.2 webserver and tomcat 6 as app server.
I have two unix boxes (let say A and B) where apache is installed for load balancing purpose.
The issue is now and then I see that on both the server reaches to 250 busy servers which makes my site very slow and after some time the site is unaccessible.
When I see this I restart apache on both unix boxes and also restart my app server.
But that does not work. As soon as I start apache the httpd process ramps up to 12 (ps -ef | grep httpd) within a minute and the busy servers still remains at 250.
The only I have to do is wait and watch till the busy servers goes down to 250 and then site is back to normal.
Some times it takes hours for busy servers to go down below 250.
I dont understand that why even restarting apache and tomcat doesn't work. why the busy servers are still at 250. even after I restart.
This is what I have in httpd.conf
<IfModule worker.c>
ServerLimit 80
StartServers 2
MaxClients 250
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
I tried to increase MaxClients to 300, which also didn't work and apache or httpd process shuts down by itself.
View 3 Replies
View Related
Jul 7, 2009
we have problem with increase HDD for VPS in vmware
when i increase HDD show this error:
"Reconfigure Virtual Machine" failed to complete OK
If these problems persist, please contact your system administrator.
DetailsOperation failed because file already exists.
View 6 Replies
View Related
Jul 10, 2007
I want to edit the nf_conntrack value 'cause I'm being DDoSed and my /var/log/messages says nf_conntrack is full...
I know how ip_conntrack can be modified.. but I can't figure out how to edit nf_conntrack (installed FC 7...)
if there are any additional settings i must edit on apf to work with nf_conntrack please warn me about it.
View 6 Replies
View Related
May 23, 2007
Is there a way to increase FTP timeouts to 60 minutes within WHM? Otherwise, how would one do it via SSH?
View 5 Replies
View Related
Jul 18, 2008
Just received this from cPanel... it is a substantial price increase (33%). Should be fun explaining to customers why they will start to be billed more...
Earlier this year we released cPanel VPS Optimized as part of our ongoing effort to provide quality web hosting automation software. You can learn more about this optimization of our software for VPS environments on our website at:
http://www.cpanel.net/products/cpvps/
In order to provide optimized software and ensure continuous updates for your virtual server customers, effective September 1, 2008 the monthly pricing for all internal virtual server licenses will be increased by $2 per license.
This price increase is for virtual server licensing only and will not affect your dedicated server license pricing.
View 14 Replies
View Related
Jul 13, 2009
i have a dedicated server windows 2008
and i created users on the group (remote desktop users)
but only 2 users can join online
how can i increase this?
View 4 Replies
View Related
Nov 4, 2009
althogh the cpu is very powerful now,
i feel the sata speed and io is the bottleneck of server,
if we use four SATAII HDs to do raid10,
about the hd performance,
will take how many more than original one sata hd?
View 14 Replies
View Related
May 2, 2009
I'm considering upgrading our company's server. We run an ecommerce site php/mysql based, we have about 12,000 visitors per day and we use up about 1500 gig per month. Simple ecommerce site, nothing fancy. We had some complains from people that our site is "slow" (despite it running smoothly for us, but these people claimed that only our site was "slow" and that they use fast connections) so that's why now I'm thinking maybe its time to upgrade.
We are using softlayer, for an extra $50 per month they recommended that we upgrade from our Opteron 1216 to "Xeon 3220 - 2.40GHz (Kentsfield) - 2 x 4MB cache"
Are we going to see a serious increase in performance? Will the increase be enough that most visitors will actually be able to feel it?
View 14 Replies
View Related
Jul 28, 2009
Anyone else see an influx of fraudulent CC orders with all valid information? Even the IP of these orders matches or comes close to matching the address. What's in common is that email correspondence reveals Asia-based IP addresses and the phone number never checks out.
Could this be due to the recent Network Solutions breach? I've never seen so many fraudulent orders with nearly everything checking out.
View 6 Replies
View Related
Oct 21, 2008
I use a VPS with CentOS and LX-Admin. My VPS run only 1 forum phpbb3.0.2 and nothing else.
3 days ago, disk used was 2.6GB, yesterday disk used was 2.7BG and to day disk used is 2.8GB ...
I wonder why disk used of my VPS increase everyday? It's may be because of cache and log? How to clean unnecessary cache and log?
View 7 Replies
View Related
Nov 3, 2008
how can you increase the uptime of your server?
can i ask how could you increase the uptime of your server?
View 2 Replies
View Related
Jan 19, 2007
We've been considering getting a cabinet at Level3 in Tampa and the last pricing we got was November 2006. Yesterday I spoke with the rep I'd been dealing with to place the order, and was told that Level3 raised their prices substantially as of January 1st.
The quote we got 2 months ago is now a full 30% higher.
Can anyone confirm whether Level3 really did take a fat increase, or am I being hustled?
View 4 Replies
View Related
May 25, 2007
I have an increase in bandwidth for one of my site.
Usually, it average around 6 or 7 gigs per month. This month im almost at 10 gig. In awstats, it report that a spcific ip have used 3.49 GB alone and as 128668 pages view and 128668 hits. Last access was 18th of may.
I have done a IP whois, and it appears that this IP belongs to [url], which is an ISP.
Now, im thinking of all types of things. Is my account serving files for someone? hack?
View 3 Replies
View Related
Apr 23, 2008
Is it possible to add another hard-drive and attach it to increase the size of the /home directory?
Beginning to run out of space.
View 6 Replies
View Related
Dec 15, 2008
I have CentOs 5 With LxAdmin
My Current Import Max File in PhpMyAdmin is 8192 KiB
I have Changed Values in php.ini and my.cnf But Still No Luck At ALL, Its Not Working
View 4 Replies
View Related
Mar 31, 2008
I can not find anything weird on the server.
Everything seems normal.
Why the traffic go high suddenly, then it drop to normal after a while.
View 8 Replies
View Related