know a good VPS hosting service which offers a lot of RAM & Port speed for a cheap price?
Best one I found so far at the "VPS Hosting Offers" forum:
Code:
Windows 2003 Enterprise
2048 MB RAM
20GB Space
1000 GB Bandwidth
$70 dollars USD
This would be used for hosting a gameserver~
I run a large service on 2 machines (we're talking 8x2.66Ghz processing power, 4-6GB ram, etc), however we are thinking about creating a node/clustered setup to help spread the load, bandwidth, mysql (having one server for hundreds of thousands of databases is not wise it seems :p), diskspace etc. Lots of machines just seems to be a cheaper and more powerful option.
Would you advise going with lots of lower end machines, or just a few mid-range machines.
Here is what I propose:
3 of these
Dual Xeon 3GHZ Dual-Core (4x3GHz)
3GB RAM
500GB Sata Drive
4000 GB Bandwidth
100mbit
or
4 of these
XEON X3220 QUAD CORE 2.4GHZ 1066FSB
2GB DDR2 RAM (Upgradeable)
250GB HDD
2000GB Bandwidth
100mbit
or
7 of these
Dual Xeon 3.06 Ghz
2GB DDR2 RAM
250GB SATA
2000GB BW/MONTH
100mbit
All of the above are roughly similar prices in total.
How can I check the post speed using SSH
so I can know if the server is on 10mbps or 20 or 100mbps?
how to translate this into what would be needed in port speed to cover this server if converted to colo, in Mbps ? Is it 4.5?
--------------------------------------------------------------------------------
The statistics were last updated Wednesday, 14 February 2007 at 10:50,
at which time 'XXXXXXXXX' had been up for 362 days, 17:47:15.
Last 30 days usage (Metered 95%): 4670.57 kb/sec
Last 30 days usage (Metered 95%): 1477797.53 MBytes
Total Utilization ( Last 30 days ): [In 637187 MBytes] [Out 65140 MBytes]
Max Speed: 12.5 MBytes/s
---------------------------------------------------------------------------------
Also, is there a real need to be on a burstable connection, or are flat rates OK most of the time? Just looking for the advantages and disadvantages of it.
how can I change ethernet port speed. For example I want to change 100 mbit to 20 mbit. I m using centos 4.5 final.
View 4 Replies View RelatedI am moving into the world of dedicated servers (from VPS). I just got a server from Serveraday.com /OLM.net.
When I was doing bandwidth tests, I found the server's inbound speed was much slower than outbound. I tried downloading a bunch of different provider's 10MB test files from the command line of my server using wget. They were all around 20-30 Kbps.
When I take those same 10MB files and serve them from my dedicated box, the results are much different. My server can push the files out at over 1Mbps.
Why would my server be set up this way, and is this normal behaviour? I sent a ticket to OLM, but their support seems to take a long time. So I figured I would bounce the question off of all you here on WHT
How can I detect port speed on my CentOS server ? I need to know it's 10Mbit/s or 100Mbit/s
View 6 Replies View Relatedi just buyed a dedicated server with 100mbps dedicated port..
how can i test the traffic on port to see is is realy working on 100mbps?
I've got a CentOS 5 box that I want to cap/throttle the speed of the port to ensure that no more than 50 meg is passing in either direction at any given time.
- I know you can do this with FreeBSD using ipfw but that's not an option for me at the moment...
- I also know you can do this with some reasonably decent switching gear but again that's not an option. It's not my switch and they don't provide capped ports.
So, the question then becomes is there any way to lock the port down to 50 meg using only linux itself?
i have site used over 2000gb bandwidth per month at 100 mbit port speed ,i am thinking about going unmetered with $100 extra but port speed would be reduced to 10mbit...
View 7 Replies View RelatedI wonder whatLs more important on a shoutcast server, to get more bandwidth per month as possible, or a faster port connection?
I have test a 2 hours music stream at 128k bit rate and was only 5MB per listener !
This is not to host 24/7 radios. Its a project to host DJs /Live Bands at
a maximum of 128k, with no more than 2 hours events.
Also each event between 50-80 listeners, and not at same days or hours.
About the port connection, what this means? :
Port: 10/100MBPS SWITCHED VLAN
Is it shared and from 10 to 100mbps?
I am trying to find the best deal with dedi servers.
Have at this moment a unlimited bandwidth /100Mbps shared, but it seems the CPU is too low (AMD Sempron 3100), as I canLt seem to create more than 40 shoutcast accounts (and no client is streaming, just ON), and the server load goes up to 4.5 !!
So, I am looking on the market , as I saw better deals with better processors (Pentium4, Core 2 Duo), and much cheaper (below $100), but they only offer 2000/3000GB bandwidth.
Whats do you think?
Since 15.05.2015 smtp experiencing problems.
Smtp service (qmail) stops responding on port 25:
# time telnet localhost 25
Trying 127.0.0.1...
quit
quit
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
quit
quit
Connection closed by foreign host.
real 4m10.629s
user 0m0.000s
sys 0m0.002s
After server restart or sometimes apache stop or ixnetd restart its responding for a some random time, and then again it stops to respond. Plesk panel show it as stopped but qmail itself running in memory, and does other its work, it just stops responding at port 25, or responds with a huge delay.
I've tried change it to postfix, reconfigured with mchk, repaired with repair.sh -r, disabled and uninstalled parallels antivirus, antispam, dnsbl, disabled firewall, disabled smtp lock. Checked apache, dns. Enabled submission port which works when 25 port doesnt, but i need working 25 port.
Nothing solves problem, its just stops responding after some random time. There is no errors on maillog.
I think this problem occured after recent plesk microupdate, because i didn't do anything to server configuration in last months.
This article says it might be dnsbl [URL] .... but it disabled(from plesk panel) on my server, maybe there is way to focefully kill any relation to dnsbl?
Plesk info:
OS Red Hat Enterprise Linux Server 5.9 (Tikanga)
Panel version 11.5.30 Update #50, last updated at May 18, 2015 05:21 PM
The system is up-to-date; last checked at May 17, 2015 10:56 PM
update: xinetd restart is definitely brings smtp alive, but it goes off after random period of time (5min ~ couple hours)
I'm runnung a server with Apache2 (Apache/2.2.16 (Debian 6.0))
I would like Apache2 listen on port 8080 for IPv4 and on port 80 for IPv6.
This is what I have now:
/etc/apache2/ports.conf
My friend is setting up a media sharing site which will use a lot of bandwidth. He would like to colo two 2U servers with 10TB or so of bandwidth each. I have advised him that FDCservers unmetered is about the best price he can have. Can anyone else suggest a place offering 100mbit or 10TB of transfer for less than $1000/month per server.
View 14 Replies View RelatedCurrently I am using Linux + cPAnel and using the port 25 for email sevrer. Currently we facing 1 problem is, some user's ISP is not support port. May I know how can I add additional port into server and allow users to send mail by different port?
View 1 Replies View RelatedBest management with Lots of bandwidth...
I am going to be starting a filehosting site soon and i need a dedicated server fully managed one. With that i also need alot of bandwidth.
Budget: $150-200
I was looking at [url]but didnt like it much.
We are running an application on IIS that sends out 4-500 emails per day via a smarthost, but nearly 11,000 every weekend. None of this is bulk mail...
We need a new smarthost provider ASAP, as our current host is discontinuing this service this week, and we were just notified.
Our current problem is that when we try to start sshd daemon we get the error "/lib/libc.so.6: version GLIBC-2.4 Not found".
The next problem is that when running things such as "hostname" we get the error "Floating Point Exception (core dump)."
OS: Fedora Core 4
Kernal: 2.6.12-1.1398_FC4smp
Control Panel: cPanel 11.3
Think it could be cPanel? If so, how to downgrade?
Also, when I do ls for the / directory, I see a whole bunch of core.***** files.
I have been experiencing a lot of Keepalive requests for a particular image on a particular domain. please see the lines below.
0-11233931/63/63K 0.15100.40.030.03 195.68.185.13mydomain.comGET http://mydomain.com//images/logo.jpg HTTP/1.1
1-11233941/77/77K 0.18100.40.050.05 122.164.58.63mydomain.comGET http://mydomain.com//images/logo.jpg HTTP/1.1
2-11233951/42/42K 0.76000.40.170.17 89.139.214.74mydomain.comGET http://mydomain.com//images/logo.jpg HTTP/1.1
3-11233971/57/57K 0.04000.40.020.02 82.199.98.229mydomain.comGET http://mydomain.com//images/logo.jpg HTTP/1.1
4-11233981/46/46K 0.27000.40.040.04 217.150.55.41mydomain.comGET http://mydomain.com//images/logo.jpg HTTP/1.1
These are just a few lines from the top.
How can i prevent this from happening.. it seems as a SYN Flood, or maybe a DDoS.
I have a project (using multiple servers) that has generated 3TB of data (compressed), with another .5TB or so each month, and the hard drives on my servers are very close to capacity.
The data doesn't need to be accessible online, so I'm trying to find a low cost way to deal with this data. Keeping the data on dedicated server(s) raises the monthly cost every few months, which isn't good. Transferring that much data to my location via the Internet is costly and inconvenient.
I'm thinking the best option would be to find a host that can ship hard drives to me, after I copy data over. Does anyone know if that is something that hosting companies are willing to do?
I've a few arcades sites and they're using more bandwidth than my servers can handle (> 2TB month). I currently have two dedicated boxes.
The sites are static, so they don't require much processing power, just bandwidth (lots of .swf files).
My current host(liquidweb) offered me a 10mb unmetered for 100usd/month, which sounded too much, as I think that I'd be better renting more servers(Or VPSs) and spreading the sites (avoiding single point of failure).
I searched and thought about trying mediatemple grid service, which offers 1TB bw/month.
What do you guys think? Will I be able to use all the BW they promise, ow they will try to kick me off saying that I'm using too much resources(even I hosting only static files)?
I usually move 900MB to 1.1GB or so of Data per month.
I noticed today that I've moved 3.5GB this month. How can I tell what file(s) are being moved?
I'm uncertain how I have tripled how much data I usually move.
I have an office internal website and I opened a port in the gateway of my office (7080) to this website (server )'s 80 port. That makes this website open to public as office has static IP. And then when I view the site from home . it's fine. But when I tried to login, the site is using a pop-up, I guess it's http authentciation, login, I was redirected to a url without my port number any more, that stops my access to the site as obviously I would.
How can I keep my connection/port number ...?
A weird thing happents once on few days on my server, and it's not a regular thing or on exact time.
When I have this problem no page can be loaded in the browser, but WHM is working, i think because it's accessed by IP .
In apache status page I can see lots of ..reading.. requests which are there even for 10 - 20 seconds sometimes.
Usualy the server has 10 - 20 requests/s :
CPU Usage: u35146 s2297.05 cu2.74 cs4.5 - 6.97% CPU load
11.2 requests/sec - 83.0 kB/second - 7.4 kB/request
10 requests currently being processed, 8 idle servers
But when the ..reading.. requests appear it goes much higher like 100 to 200
11.5 requests/sec - 85.3 kB/second - 7.5 kB/request
200 requests currently being processed, 0 idle servers
after 3 minutes :
160 requests currently being processed, 30 idle servers
When I logged on to SSH I saw that there are ~150 conection from a single IP .
1) What would you guys say is average in terms of the # of emails in the Mail Queue?
2) What steps can be taken to tighten it up? If I start with a clean slate, it only takes about a week or less for my mail queue to reach 1000 or more. Most of it seems like junk mail.
We are going to offer web space to our students and we want to build a new server just for this purpose. We were looking at buying a storage array, a RAID card, and a server. I have no problems building a server; however, I have never built anything with an external enclosure. I am thinking about buying this storage array:
www newegg com/Product/Product.aspx?Item=N82E16816702010
I plan on installing hard drives in every drive bay for a total of 12 drives.
The problem I'm having is I don't know what type of RAID card to buy. I saw this one; but, I don't know if it will work with this storage array.
www newegg com/Product/Product.aspx?Item=N82E16816116062
Thanks so much for any light you can shed on this! I apologize for the link but I do not have enough posts insert URLs.
I have anywhere between 80,000 - 90,000 webpages that have a single code into this. Unfortunately at the time the web developer I used didn't use PHP includes. So each .html file has the code in it.
I want a way so I can do a single command either a program or an SSH command can find the syntax in the files and replace it will code I have. Its just a single line of code that is basically for an adsense code, so the pub-blahblahblah etc..
Does anyone know of a SSH command I can use, or a program that will find and replace without manually opening up each file? 80k - 90k of opening files then find/replace will take forever!
I use a host that gives me way more bandwidth and space than I need, but it is still super slow. It's Dreamhost who is known for charging very low fees and promising the world. Although my sites do load and I get unlimited everything pretty much, I can't stand the slow loads.
They have offered me virtualization of my server so I can create my own virtual server with 150Mhz and 150MB of dedicated CPU/memory for $15 more a month... do you think that will speed me up a lot or should I just suck it up and pay for a better host that doesn't pimp themselves out so badly?
We used Red Hat with ext2 as our file system on an old server with 100k+ of image files in a single directory. This seemed to preform ok until we switched to FreeBSD using UFS. Now images load very slow. I have read that Ext2 uses and internal hash to speed lookups, while UFS does linear searches for lookups.
View 2 Replies View RelatedI have installed APC on our Windows server. After I enable APC and restart apache our pages throwing Lots of PHP Notices.
Code :
System Windows NT 6.1 build 7601 (Windows Server 2008 R2 Web Server Edition Service Pack 1) i586Architecture x86Server API Apache 2.4 Handler Apache LoungeThread Safety enabledPHP Extension Build API20100525,TS,VC9Apache Version Apache/2.4.2 (Win32) OpenSSL/1.0.1c PHP/5.4.4Virtual Server Yes
I have a Plesk v12.0.18_build1200140606.15 os_CentOS 6 server. using postfix
And Lots of spam is send from my server.
I tried: [URL] .... but with no results.
on the moment the /var/log/maillog file is over 5,5GB
and the /var/log/maillog.processed is over 7,2GB and splitted into multiple .gz files
What can I do to find the source of the problem and stop it ?