Currently I am using Linux + cPAnel and using the port 25 for email sevrer. Currently we facing 1 problem is, some user's ISP is not support port. May I know how can I add additional port into server and allow users to send mail by different port?
View 1 Repliesshould i need to edit /etc/services and /etc/exim.conf?
View 3 Replies View RelatedI just enabled SMTP on my box, and tried requesting a loss password on my website, i get this error.
Quote:
Warning: mail() [function.mail]: Failed to connect to mailserver at "localhost" port 25, verify your "SMTP" and "smtp_port" setting in php.ini or use ini_set()
How do i get rid of this error.
Is anyone successfully using cPanel with smtp port 587 and have a working email account?
After deciding that Plesk wasn't for me due to the lack of reference material in this and other forums, I had my hosting company, ServInt, delete my old vps and install a new one with cPanel.
Everything went fine until I configured my email. Just like with Plesk, I cannot access the smtp server via Outlook. I can ping it successfully, but it either terminates the connection or doesn't recognize the correct user name and password. With Plesk, it was a simple matter of enabling the use of port 587.
Not so with cPanel, at least for me. Even though the Exim service is enabled and another instance is enabled on port 587, I still can't connect. Thought it might be CFS, which is new to me with this install, so made sure it was disabled. Opened up a ticket with ServInt and even their techs can't get it functioning, so _they've_ opened up a ticket with cPanel.
Hence the title of this post, I can't beleive that I'm the only one whose had this problem before because blocking port 587 has been done by BellSouth/AT&T for many years now.
Nothing like having your company email down for over 6 hours to keep you up at night.
I was wondering if I could change the default port of vnc server and how to do so?
What is the default port for vncserver server anyway? Is it 5900?
I would like to close port 25 and use other port for SMTP service and so avoid a lot of attempts to Access my SNTP port.
I followed all the steps in [URL] ... included the last one, about close port 25 from external.
And now qmail can send mails but can not receive from external senders. Is there any solution for solve it? or qmail must listen port 25?
i want to changing my ssh port from 22 to other .
so i have edit ssh_config and change 22 to for example 9000 .
and add 9000 in TCP_IN and TCP_OUT on my csf Config and delete 22 from them
and restart ssh .
but my ssh isnt login with 9000 and no effect .
I decided to change my SSH port. I red an Article about it.
Quote:
At command prompt type: pico /etc/ssh/sshd_config
Scroll down to the section of the file that looks like this:
Code:
#Port 22
#Protocol 2, 1
#ListenAddress 0.0.0.0
#ListenAddress ::
Uncomment and change
#Port 22
to look like
Port 5678 (choose your own 4 to 5 digit port number (49151 is the highest port number)
Uncomment and change
#Protocol 2, 1
to look like
Protocol 2
Save file and restart SSH
And I do all step. I change Port 22 to port 8443 . But Now I cannot loging to root via port 8443 . WHy?
How can I change this port to 22.
i have a few windows xp running IIS in a LAN.
i have a static IP from my current ISP.
is there any way that i can have all these 7 machine to work with individual domain names
eg:
server 1 = demo1.com
server 2 = demo2.com
.
.
.
any way to have this work?
I'm runnung a server with Apache2 (Apache/2.2.16 (Debian 6.0))
I would like Apache2 listen on port 8080 for IPv4 and on port 80 for IPv6.
This is what I have now:
/etc/apache2/ports.conf
I want to add a new port for SMTP (1024) as a client's ISP block 25, 587 and 2525. I tried following this guide: [URL] ... but it doesn't work with Parallels Plesk Panel 11.5 ...
How to add an additional SMTP port to Qmail in Plesk 11.5?
Is it possible to change the port of ftp, similarly to what you can do with SSH?
View 13 Replies View RelatedI have an office internal website and I opened a port in the gateway of my office (7080) to this website (server )'s 80 port. That makes this website open to public as office has static IP. And then when I view the site from home . it's fine. But when I tried to login, the site is using a pop-up, I guess it's http authentciation, login, I was redirected to a url without my port number any more, that stops my access to the site as obviously I would.
How can I keep my connection/port number ...?
Since 15.05.2015 smtp experiencing problems.
Smtp service (qmail) stops responding on port 25:
# time telnet localhost 25
Trying 127.0.0.1...
quit
quit
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
quit
quit
Connection closed by foreign host.
real 4m10.629s
user 0m0.000s
sys 0m0.002s
After server restart or sometimes apache stop or ixnetd restart its responding for a some random time, and then again it stops to respond. Plesk panel show it as stopped but qmail itself running in memory, and does other its work, it just stops responding at port 25, or responds with a huge delay.
I've tried change it to postfix, reconfigured with mchk, repaired with repair.sh -r, disabled and uninstalled parallels antivirus, antispam, dnsbl, disabled firewall, disabled smtp lock. Checked apache, dns. Enabled submission port which works when 25 port doesnt, but i need working 25 port.
Nothing solves problem, its just stops responding after some random time. There is no errors on maillog.
I think this problem occured after recent plesk microupdate, because i didn't do anything to server configuration in last months.
This article says it might be dnsbl [URL] .... but it disabled(from plesk panel) on my server, maybe there is way to focefully kill any relation to dnsbl?
Plesk info:
OS Red Hat Enterprise Linux Server 5.9 (Tikanga)
Panel version 11.5.30 Update #50, last updated at May 18, 2015 05:21 PM
The system is up-to-date; last checked at May 17, 2015 10:56 PM
update: xinetd restart is definitely brings smtp alive, but it goes off after random period of time (5min ~ couple hours)
After migrating our existing client base from legacy Plesk 9.x servers and Expand to PPA, clients phoned in with mail sending problems. These clients are using submission port 587 because their ISPs intercept port 25.
Existing client, Outlook error message:
"None of the authentication methods supported by this client are supported by your server"
Testing with Thunderbird, error message:
"An error occurred while sending mail. The mail server responded: 5.7.0 Must issue a STARTTLS command first. Please verify that your email address is correct in your Mail preferences and try again."
It seems a "fresh" PPA requires STARTTLS on e-mail clients. It is furthermore confirmed that Thunderbird detects the e-mail server settings as dependant on TLS.
The problem is that TLS doesn't seem to work properly by default.
In order to preserve our existing customer base, we follow: [URL] ....
Bottom line, in your /etc/postfix/master.cf, change the line that says "submission" from this:
submission inet n – - – - smtpd -o smtpd_enforce_tls=yes -o smtpd_tls_security_level=encyrpt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticate d,reject -o smtpd_sender_restrictions= -o smtpd_proxy_filter=127.$
to this:
submission inet n – - – - smtpd -o smtpd_enforce_tls=no -o smtpd_tls_security_level=may -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticate d,reject -o smtpd_sender_restrictions= -o smtpd_proxy_filter=127.$
then do:
/etc/init.d/postfix reload
This is just a quick fix to get you going and stop the phones from ringing. Ideally we would like to re-enable TLS and have information as to why it is not working.
My app needs to be viewed using :8080 behind the domain. I want it be viewable without using adding any port behind. I've research on google and many said about edit the server.xml file but the problem is I can't located the file no mater what
root@kohproxy [~]# find -name server.xml
root@kohproxy [~]#
I need changing the nginx port. I've followed various threads and have created a custom nginxDomainVirtualHost.php file at: /usr/local/psa/admin/conf/templates/custom/domain, while the website indeed moves to the port I have set, a second nginx thread starts at port 80 and takes over in it's place.
I need to put varnish at port 80 and cannot do so until all services relinquish control on port 80.
Followed clues here: [URL] ....
some here: [URL] .....
Turn's out to be able to change the nginx port to a non-standard port you need to edit 6 files
nginx.php
nginxDomainForwarding.php
nginxDomainForwardingIpDefault.php
nginxDomainVhost.php
nginxDomainVhostIpDefault.php
nginxWebmail.php
For the time being i disabled SSL support for my test domain as I didn't need it. The line you need to look for the in above files is:
Code:
$VAR->server->nginx->httpPort
So the line would finally become from this:
Code:
<?php echo $VAR->includeTemplate('server/nginxVhosts.php', array(
'ssl' => false,
'frontendPort' => $VAR->server->nginx->httpPort,
'backendPort' => $VAR->server->webserver->httpPort,
)) ?>
to this:
Code:
<?php echo $VAR->includeTemplate('server/nginxVhosts.php', array(
'ssl' => false,
'frontendPort' => "8888",
'backendPort' => $VAR->server->webserver->httpPort,
)) ?>
To get this to work you'll need to create a custom directory at: /usr/local/psa/admin/conf/templates
And copy the files over from the root of /usr/local/psa/admin/conf/templates/default
I have to change what file and how to modify it to allow only one subdomain to have access through port 8015 and not using port 80?
View 7 Replies View RelatedI have a Windows VPS with Plesk panel. Windows Server 2008 R2 with plesk panel version 11.5.30.
I tried to change the default plesk panel port (8443) to eg (1234) without any success.
The steps i followed are the following:
1) Firewall -> Inbound rule -> allow for port 1234
2) Firewall, Disable inbound rule for port 8443
3) IIS, PleskControlPanel, Bindings: changed binding from 8443 to 1234.
Now i type on browser: [URL] .... and while its loading after some seconds redirects me to [URL] ...
How change control panel url port (8443 to 9859)?
View 15 Replies View Relatedabout the NIC and switch,
there are giga port vs mega port,
in your experience,do they really be different?
I recently changed my SSH port, but locked myself out when my APF firewall was installed.
Where would I got to add a custom port inside the APF's config file?
I have a reseller account that uses WHM/cPanel. So of course, SquirrelMail and Horde are already installed. I like to check my email at work, but unfortunatley, my employer blocks connections for say mydomain.com:2095.
Is there a way around this? I'm too much of a noob to try and install Horde again, bypassing the cPanel. I use Horde as the example because I need a good calendar and address book.
I login & send email through thunderbird using SSL and it's ports (so I no longer connect using 25/26). Occasionally I use webmail (Squirrelmail)
My scripts do send mail via sendmail.
Does my cpanel server still need the basic 25 & 26 ports to deliver and receive mail successfully, or can they be blocked in APF without any problems arising?
if i try to telnet to yahoo's mail server, i get this:
[root: #] telnet mx1.mail.yahoo.com 25
Trying 4.79.181.14...
telnet: connect to address 4.79.181.14: Connection timed out
Trying 4.79.181.15...
telnet: connect to address 4.79.181.15: No route to host
Trying 67.28.113.11...
telnet: connect to address 67.28.113.11: No route to host
Trying 67.28.113.10...
telnet: connect to address 67.28.113.10: No route to host
but it works from one of my other hosted servers.
this keeps mail building up in my queue as it cannot send mail out cause the connection times out.
I can telnet locally to send myself email. This is my own dedicated server.
i have no idea whats up - default policy is ACCEPT in the OUTPUT chain of iptables.