VIRTUOZZO NODE SCREWED
Apr 30, 2008
I mistakenly ran ELS script [url]inside the NODE in root mode instead of inside the vps container I was intending to run the script in, and everything basically stopped working - even after a hard reboot.
No vps's load, no sites work. The vzagent is not pinging. Cannot connect via VZMC as a result.
Quote:
The following error(s) were detected:
Code
Description
1
Most likely your service Virtual Private Server is down or you have entered invalid host address.
I stopped the ELS script at the mytop install yes/no step. I selected yes for all previous install options EXCLUDING apf and bfd. I did a yes on sysctl.conf hardening, disable register globals, chmod dangerous file folder (which probably caused the problem).
View 0 Replies
ADVERTISEMENT
Apr 11, 2015
We have one Cloud Server hardware node that exists only as the backup location for containers and VMs in Cloud Server/PVA (it hosts no virtual servers). Can it also serve as a Backup Server Node?
A related question, in my case, is whether we can configure a Backup Server Node to use a particular drive/mount/directory, as we can with PVA? I couldn't find any info in the docs about any settings at all for the Backup Server Node.
View 4 Replies
View Related
Aug 15, 2007
I'm not sure what is wrong with my /tmp directory.
Everytime i try to do a PHP file upload, it comes up as fail because the uploaded file would not go to tmp, or is somehow stuck there as the filesize returns 0kb.
Anyone knows where to start looking to fix this problem?
tmp mount:
/dev/tmpMnt on /tmp type ext2 (rw,noexec,nosuid,loop=/dev/loop0)
ls tmp returns:
drwxrwxrwx 4 root root 4.0K Aug 15 10:42 tmp
View 2 Replies
View Related
Oct 30, 2009
I've been with Siteleader for several years, and they seemed okay, if not a bit slow and unresponsive for the last year or two. They billed me, however, $125/year to register my domain, and recommended also registering the .org and .net variations to protect myself, so another $125 each, with no advance notice of billing.
I always suspected this was run by younger folks who don't interact well with people, but it wasn't until I tried to setup online commerce that I really found their shortcomings. The OS Commerce software seems better suited to Europe since it lacks basic functionality for interstate commerce, shipping calcluation, sales tax, and is clunky in my opinion. As I struggled with it, invested in credit card processing, authorize.net, etc., and time to build the catalog, it just didn't work out. The credit card processing didn't happen despite all appearances that I set everything properly.
When asking for help and expressing frustration with the OS Commerce package one response (often without a name) from Siteleader was "we don't know every software program out there". Well, I was just asking for help with the one they were providing. Lack of follow up, promises to help and fix things, my disappointment with the whole ecommerce experience through them drove me to find another provider. A dozen emailed inquiries about ending service later I received a brief reply that indicated that I would be charged $495 (!) per domain to terminate services with their firm.
I tried desperately to reason with them, but emails went unanswered, their phone number goes to voicemail 312-324-0384. Another number, oddly similar, 312-324-0348 rings at a boutique in Chicago and the gal who answers says "Chris" does the computer stuff, but messages or him are not returned. I plead with siteleader via email for a phone number or for a return call so that I can speak with someone in person. (and I had received periodic calls from "Ron" who also answers the accounts@siteleader.com email address-when there is a name) who seemed polite, but I suspect these guys bury their heads in the sand and wait for someone to give up and just pay to leave.
I contacted someone at enom.com since that's where my domain name is registered, a fellow there indicated that since I was shown as the owner, I was good, he would notify them and in 24 hours he could let me take ownership and sign up direct with them. Well, Siteleader saw this "ticket" activity and changed the name of the owner to themselves so now this fellow at enom says there's nothing he can do.
I've been stressed and livid for the past two days. Convinced at first they weren't reading my emails at siteleader, then they'd send 2nd and 3rd notices that to cancel an authorized person would need to contact them and the fees would be due. Irony, since I can't effectively make contact with them.
Then, when I thought they were ignoring my emails, or they weren't getting through (understandable, since emails through my website don't always forward, courtesy of these same idiots) I received an email that just effectively said "pay up and then go work on your own business, go away", no name, but this from a supposed "legal and compliance department". I suspect there are no grown ups involved here.
I'm stuck looking at legal action. I did file with BBB, but it's so tricky with their addresses, though I found a P.O. Box that might work, they seem to merely dodge any customer service issues, yet penalize anyone who wants to leave for better service.
View 14 Replies
View Related
Aug 27, 2007
I have a VPS with mctoast and they are closing the door on this next month.
I need to move and I have no to idea what or where and please need help.
I have been with those toads since the first day they opened and lived with a crappy regular account and then switched to VPS when it became available. They wanna move everyone back to shared which I cannot do, I`d rather die. Their shared servers suck.
My problem is that I have 5 resellers and I want full control over them, not on a shared server. Also I need to make sure all databases and scripts work on my new home. The transfer needs to be flawless and I need Fantastico and cPanel installed as well. It would be nice to be able to restart services as well. It was also a managed VPS, I didn't have to do any maint.
So many of my accounts are my students that I teach at college and school just started this week so this announcement of this happening today really has my head spinning.
This is what I had-
1.0 Ghz-512 MB MEM-16 GB-400 GB BW
View 4 Replies
View Related
Jun 4, 2008
i did a lot of research and ended up with leaseweb for the server needs of my new project.. i first got a 10mbps unmetred server and well all went fine..
we were growing at 1000% so i ordered for a 100mbps unmetered server n bam all the problems started..
first of all my server stated showing sql errors saying on the first page that cant connect to sql database n i had to reboot the server every 4 hours so that it does not so that error does not show up coz it sarted showing the error every 5 hours...
i sent in a ticket about the problem n they said none existed!
after a lot of shouting they finally after 2 days checked the server and the hard disc was replaced... n they could not take backups n m in file sharing n ALL my files were lost!
after this the WHM n cpanel stopped working... i sent in a ticket n they replaced the cache with the space taken up by the cpanel... n bam.. nobody could login in coz no sesions could be created...
one more ticket and they said pay 25euros for every 15 min of support... they tried charging me for soemthing they screwed up themselves... after a lot of mails they fixed that!!
nyways we were not given the giga port as was decided n i sent in a ticket n they said they will do it a day after and will change the IP n it is a small thing and the server has to be shifted n the new ip will be sent...
i said ok n they took my site offline for a whole one day!
if that was not enough they sent me the new ip n had done something wrong configuring the server and the name is poiting on the new IP but the site is not working!
now this is a lot... my site is screwed up for more than week now... n my site is no longer online from the last 2 days now! sent them another ticket n awiting reply n i had asked the godaddy support too n its d server issue...
this is bull ****... m sry for the language but m desperate...
tell me what to do? m tired of all this...
i spent $10k on this projct n we reached world rank 3300 in just a month n now my site is no more!
i am practially near being broke... n the lease web ppl are still charging me for the server that is not even working!
tell me what to do?? can i take any legal action?
all the users of the site have shfted to other alternatives and n i have lost whatever i made n my site still not online!
this project is dear to me n leaseweb screwed it all up!
View 14 Replies
View Related
Dec 30, 2008
Had someone contact me to assist in gaining control of their content and name, as it appears their 'host' has vanished (If I've found the right person, he's been arrested for repeated domestic violence). I look into it, and they don't answer emails (for months now, according to the true owner), phone numbers are disconnected and they've tried to hide their "business" by using resellers and multiple dummy companies.
Still active GoDaddy reseller for their domain name...which is registered in this guy's name, not the true owner. He's gone, for months now, and the real owner is left trying to convince GD of the ownership.
Then the hosting, traced to an active Site5 reseller account. They won't let her in or give her the files/db without the reseller's permission, and he's into the wind. Chat support suggested we open a new account. They won't give us anything, mind you, just "open a new account".
Hmm...not very helpful.
They went on to suggest contacting management, but left little hope of success in doing so, according to him.
So, why would this person do all of these things to keep the rightful owner out?
Is it deliberate?
Self preservation?
Honest mistake, or incredibly stupid?
<rant>
Consider this an open recommendation to all of you new, start up or would-be hosts:
Leave a way for your customers to gain access to what they've paid for, should you be hit by a bus, or simply fall off the face of the earth. Domains registered in *their* name, not yours, and have a backup plan in place so someone at your company can at least do the right thing in your absence. Do it today, now even.
You the only one there? Write up a document, and leave it with someone you trust to carry out instructions when you're gone. I've had to deal with everything from accidents to deaths and simply quitting without telling anyone, and it's completely unfair to the customers you leave behind.
</rant>
View 14 Replies
View Related
Jun 14, 2007
Our server with raid 10 has had a failed hdd (which was replaced) and a
corrupt ext3 filesystem.
The server is now booted with Knoppix but drives will not mount. All we are trying to at this point is salvage as much data as we can.
View 12 Replies
View Related
Nov 7, 2009
i'm a vps provider and i'm using this server for vps host
Code:
Dual CPU Xeon 5420, 24GB Ram, 1TB HDD
24GB of Ram
and now i see the used ram is un normal
Code:
[root@216-19-200-162 ~]# free -m
total used free shared buffers cached
Mem: 24064 23865 199 0 541 19509
-/+ buffers/cache: 3813 20251
Swap: 4094 0 4094
[root@216-18-201-162 ~]#
the free ram us 199 of 24GB!
every time when i reboot the server the used ram back normal but after per hours the issues back again
i have contacted the DC and they say that there is no problem with there hardware
the number of vpses in that node is 7 and all the vps have a limit ram.
View 14 Replies
View Related
Mar 6, 2009
I want to build a VPS Node using Quad Socket Tyan Motherboards and AMD Opteron 2376 Shanghai 2.3 GHz Processor (Quad Core).
I am in doubt since I notice that some providers (at least two rather big provider which I have account) are using Dual Core AMD Opteron 2212.
Is there any specific reason why those providers is not using 2376 AMD Processors? .. is it because the Dual Core AMD Opteron 2212 supports Virtualization Technology, while the 2376 is not?
I will use Xen Hypervisor, usually I use Intel 54xx Processors but looking for *cheaper* solution , so I am really new in AMD Base Server.
View 3 Replies
View Related
Oct 22, 2009
I build raid10 for VPS nodes. Now, I will use SAN, so all VPS will be created in SAN. With the host server, I assume that I don't need fast disk array, because all the disk requests have been processed in SAN already?
View 4 Replies
View Related
Oct 18, 2009
For a quad core processor with 16-32GB RAM and SAS raid 10, would 30 VPS's be a lot?
I have a VPS with 1Gb RAM on a machine as above. I'm running about 40 (relatively low-volume) websites on it. Seems to me that if 30 others were doing anything similar, that would overwhelm a single machine.
Am I just making an uninformed bad assumption? So far, performance on my VPS has been fine.
View 14 Replies
View Related
Mar 6, 2009
Well the age old question for virtual servers, would you rather a host put all his eggs into one basket "monster node" or several smaller ones. From a provider standpoint one server is easier to manage than several, although if that one goes down, all your customers do with it. Lower costs for the provider, s/he can then pass the savings along.
Example Package:"2GB Ram Packages, 500GB bandwidth, and 20GB space."
The "EXAMPLE" Specs.
All in one
Max Clients: 126
4U Rackmount,
4 Quad Cores, "16 total cores"
256GB DDR2,
8 600GB SAS 10k,
RAID10
Several Server setup:
Max Clients: 14
1U Rackmounts,
Single Quad Core, "4 cores"
32GB DDR2,
2 300GB SAS 10k,
RAID1
If you could tell me why you picked either or.
View 14 Replies
View Related
Oct 16, 2009
i have a very high load in my node every time i monitor the load i see load average: 8.19 and some times it's go up to 60 - 80
i'm using this server
Intel Core2Quad Q9650
Ram 8GB
Bandwidth: 10000gb
Hypervm Control Panel
and there is only 6 vpses ....
View 7 Replies
View Related
Jun 19, 2009
i'm using hypervm/openvz
and i have the main package of ips which i have received from datacenter
i orderd other package ips (13) ips
i have add them to ip pools in hypervm and it didn't working
Note : netmask are different for the first ips and the second ips
when i create vps i can't login and when i ping ip it didn't ping ( requested timed out )
i have one server from softlayer and the other from limestonenetworks
when i order additonal ips from softlayer it works proberly .. now when i orderd those ips from limestonenetworks ; i think it must be modified manually
View 14 Replies
View Related
Apr 14, 2009
i have node 16 cpu AMD 64 gb ram HDD sas 15 with raid 10 /hypervm + openvz i host 10 vps
my problem when any vps load go over 2 the Node load go to 30 - 40 some time 100 i set CPU UNITS , Number Of CPUS and Cpu Usage for every vps but the load in node is go up
how i can set limit in vps and prevent from effect on load Node?
View 2 Replies
View Related
Jun 13, 2008
GeekLayer is looking in to expanding in to the UK - We want to offer VPSs in the UK, but to be honest, I have no idea who people consider the SoftLayer of the UK hosting industry - Who has the best rep around WHT with reasonable(ish) pricing for something like a core2quad with 8gb ram and 2tb+ bandwidth?
View 4 Replies
View Related
Jul 21, 2007
I figure while I am twiddling my thumbs here waiting for my host to tell me what the heck happened for the second time in two or three months why they have to do an entire VPS hard restart, which of course causes another hour of fck delays, that I'd ask some of the more skilled and experience folks here, how?
Just before it happened, as I was watching, the load shotup over 1, 2, 4, 20, 30 boom. (I opened a ticket at 4)
Shouldn't virtuozzo always guarantee a certain amount of cpu and bandwidth to the node root? Why do they have to hard reboot and not access it directly and stop the badly behaving vps? Better yet, why isn't the badly behaving vps stopped automatically by virtuozzo?
(oh and am I an idiot for putting up with over two hours of downtime?)
View 14 Replies
View Related
Sep 22, 2009
I'm reseller vps, and now i decided to run own node, and sell vps, i choosed VDSMANAGER control panel, because virtuzzo is expensive.
Please help me to choose best options to run best and quality node,
VDSManager or VEportal ? (good optios&security&support&...)
XEN or OPENVZ ? (uutil now OPENVZ best for run static and dynamic site, but on xen can be run vpn & shoutcast & windows & linux & ...)
RAM GB ?
CPU ?
Hard ?
can i use load balancing for vps node ?
how many vps can be run on this node ?
Ex:
VDSmanager
XEN
Core2Quad Q9300
8 GB RAM
500 GB HDD
View 8 Replies
View Related
Oct 18, 2009
Let's make this straight,
I have this vps,which is pending cancellation in a few days.
Hardware Node = EL 5 x86_64,
Vz = Xen
I asked my provider for 32 bit centos, I even rebuilt it, but my "uname --all" still
Quote:
Linux xxx.xxx.com 2.6.18-128.1.10.el5xen #1 SMP Thu May 7 11:07:18 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
so I opened a ticket asking about the vps arch.
The provider have told me that to run a vps 32 bit guest, what you have to do is (?)
+++++++++++++++++++++++++
yum clean all
echo i686-redhat-linux > /etc/rpm/platform
+++++++++++++++++++++++++
so yum will exclude any x86_64 packages.
The provider has told me also that my "uname" display x86_64 because the hardware node is 64 bit. Is this true ?
I'm no linux or vps guru, but that's doesnt feel right at all.
This has cause me some issues especially with kernel-headers and some program failed to compile.
So, is it possible to run a 32 bit OS as xen guest inside 64 bit node?
View 4 Replies
View Related
Apr 1, 2009
I want to know if there is a set of tools or a linux distro that I can use to create several Virtual Machines and make them use up all their allocated Memory/CPU to the max to see how much the VPS Node will hold.
I do this on Windows easily as I overclock my PC at home. But in linux, no idea. I need something that will do iterations like Prime95 or SuperPI.
View 1 Replies
View Related
Jun 29, 2009
I had 3 IP pools in HyperVM node. I removed (deleted) 2 pools completely because I had an error trying to create a VPS, told me the IP was being used by someone else. So I deleted the pools completely and I see they still ping. I did a tracert and the IPs come to my server so i know nobody else is using them or that they were assigned to somone else. I rebooted the server and while it was in the process I tried to ping the ips and they didn't respond. When node came up, the ips started pinging again. How can I manually remove the IPs so that my server doesn't respond to the pings and I can add them to the pool and use them correctly.
View 6 Replies
View Related
May 18, 2009
My main node load average is:
load average: 485.91, 482.41, 481.80
And its very high!
I checked all vps load is below than 3
So, why main node load is very high?
View 6 Replies
View Related
Apr 9, 2009
My VPS wen't down around 9am (Pacific) this morning, send a ticket in and have not heard anything back. Trying to start it from HyperVM results in:
Alert: no_kernel_support_for_openvz_check_if_right_kernel
Not sure if this is an issue on my side or on the entire node, haven't seen any threads regarding it yet so thought I'd make one. It's been about 4 hours now and my ticket hasen't even been updated yet. Just wondering whats going on...
Ryans usually been on top of everything whenever something happened so I'm going to wait a few more hours before calling them.
View 14 Replies
View Related
Dec 16, 2008
i just buy a dedicated server for vps reselling.
this is my hardware spec :
Intel XEON E5420
4GB Ecc memory
2x250 GB RAID 1
hypervm/xen
the question is:
how to setting ip pool
how to setup a "resource plan"
how to add a guest vps
View 2 Replies
View Related
Nov 24, 2007
I'm currently considering to enter the VPS market
I have recently acquired a nice box (2x Dual Core Opteron 275 2.2 GHz, 16 GB RAM, 16x500 GB SATA @ RAID5/6) but I'm unsure if it isn't smarter to buy smaller machines (like X2 5600+, 4 GB RAM, 2x400 GB HDD) and put like 15-20 customers on it.
Yes, I know that the hard drives are more than oversized for VPS hosting
The Opteron server will have a very, very nice I/O performance so that customers are going to have a good feeling while working on it. To refinance the costs it would of course be neccessary to put not less than 125 VPS on one box, so I can imagine that there'll be a bottle neck somewhere (CPU power I'd guess?).
What is your opinion? Big boxes with high performance and loads of customers, or small boxes with not-so-many VPS?
View 11 Replies
View Related
Apr 19, 2007
I have been with SolarVPS for some months now, and I'm pretty happy with their services. But some months ago I have problems with very high CPU load on their server, every day for a week or so. Since then I have had little problems, before the last two days. Now they are back to the same problem as last time, almost 100% CPU load on their server, causing my sites to work VERY slow, and I’m getting timeouts on my MySQL database.
When sending tickets, they kill the process, but it’s only mather of time before the CPU skyrockets again. Yesterday they told me that it was a abusing client, and they was taking care of it. But today I got the same problem.
Are they hiding the fact that they have oversold the node I’m on? (the UK node), or do I only have bad luck? And how much can I take before I start looking for a new host? I think their service and support is very good, but not when I got problems with high CPU load. They reply fast on ticket, but I cannot monitor my server 24/7 to see if the CPU load is high.
What would you have done if it’s was you that had the same problem. Do I have to accept the fact that I only pay around $55/mo for a 384MB/25GB/150GB BW and 4 IP’s (with Windows 2003 and Plesk 30 domains) and cannot demand a VPS server that runs without problems?
Anyway, it’s my experience with SolarVPS after 3 months (and three days).
View 10 Replies
View Related
Oct 9, 2009
Who are the most reliable Dedicated/Node Providers? I mean there are the cheap ones like Wholesale Internet and Joe's DC but have they proven to be reliable as well?
View 10 Replies
View Related
May 20, 2009
Our master node unable to connect to slave node for create, rebuild, manage.
But we can give access to slave with hypervm -> Servers and run anything on it.
I checked firewall, also im stopped iptables.
But master cannot connect to slave.
Where is issue and how can resolve?
Note: i can give ping or ssh access with both server to slave/master!
Help me please.
I have this when i run /script/upcp on main node:
[root@server ~]# /script/upcp
Getting Version Info from the Server...
Connecting... Please wait....
hypervm is the latest version
Executing UpdateCleanup. This will take a long time. Please be patient
License Successfully updated
vps backupdir exists... returning
Updgrading Slave xx.xx.xx.xx...
no_socket_connect_to_server
View 9 Replies
View Related
Dec 28, 2008
Is there any way to migrate a VPS from one HyperVM machine to another without the new machine being a slave or part of the same master as the other node? Maybe some kind of simple software that can copy it over? We have root access to the new node, and not the old one. We need to move 3 VPSs over. This is a personal favor for a friend, so I apologize for the lack of specific details. Long story short, he resells VPSs and needs to move hosts (again) as the one he is on turned crappy. He bought his own box @ LSN and wants to put these VPSs on there. It's currently set up as a HyperVM/OpenVZ box, same as the other box that's to be migrated *from*.
View 5 Replies
View Related
Sep 4, 2014
Any workaround for AWS and adding nodes for PPA. Since the AWS instances use key pairs for root access you can't ssh as root with a password.
View 3 Replies
View Related
