SolarVPS - High CPU Load On Their UK Node!
Apr 19, 2007
I have been with SolarVPS for some months now, and I'm pretty happy with their services. But some months ago I have problems with very high CPU load on their server, every day for a week or so. Since then I have had little problems, before the last two days. Now they are back to the same problem as last time, almost 100% CPU load on their server, causing my sites to work VERY slow, and I’m getting timeouts on my MySQL database.
When sending tickets, they kill the process, but it’s only mather of time before the CPU skyrockets again. Yesterday they told me that it was a abusing client, and they was taking care of it. But today I got the same problem.
Are they hiding the fact that they have oversold the node I’m on? (the UK node), or do I only have bad luck? And how much can I take before I start looking for a new host? I think their service and support is very good, but not when I got problems with high CPU load. They reply fast on ticket, but I cannot monitor my server 24/7 to see if the CPU load is high.
What would you have done if it’s was you that had the same problem. Do I have to accept the fact that I only pay around $55/mo for a 384MB/25GB/150GB BW and 4 IP’s (with Windows 2003 and Plesk 30 domains) and cannot demand a VPS server that runs without problems?
Anyway, it’s my experience with SolarVPS after 3 months (and three days).
View 10 Replies
ADVERTISEMENT
Sep 5, 2008
I am a SolarVPS customer. So far, I have been really happy with their service - setup was very smooth, I had to contact support a couple of times at the start and they were really quick, and otherwise I've had simply no problems.
I was alerted yesterday to the fact that my site was down. I immediately logged into the box, and found that Apache and MySQL had stalled. I restarted them, and everything was ok. So then I started to look into the problem.
Then I noticed this in my logs:
Sep 3 23:07:26 myvps shutdown[26281]: shutting down for system halt
Sep 3 23:08:41 myvps exiting on signal 15
Sep 4 03:14:22 myvps syslogd 1.4.1#18: restart.
It seems that my VPS was shut down for 4 hours and then brought back up. My Apache and MySQL didn't come back up properly after the restart (ok, my fault here, a configuration issue), so I was down for about 17 hours.
Anyway, I didn't do this shutdown, and I don't think my box was hacked and someone else did it, because even if they did, by my reasoning, it wouldn't have been down for 4 hours.
So I wrote an email to SolarVPS. They got back to me really quickly, asking me to send my server ip's and my root password (I had initially only sent my customer number). I was not really happy sending my root password over email to them, so I just sent them the server IP's.
I then got an email back saying that it was standard procedure to send my root password to the over email, and that it was secure because their helpdesk is secure. I don't know how they are securing the email connection from me to their helpdesk though (of course, it isn't secure, because email is sent in plain text), so I still haven't sent them this. I don't need them to log into my server anyway, I can see that it went down, I just wanted to know if they had brought the machine down for a reason. The whole root password over email thing is not the problem anyway.
What concerned me is the rest of their response.
They told me that they had not brought the machine down on purpose. I sent them the log lines I pasted above, and their response was:
- shows that your VPS has been shut down, just like the owner of the VPS would have shut it down using "halt" command. This issue appears when the VPS is overloaded (RAM is almost 100% used, and CPU is upto 90-100%), and in this case Virtouzzo shuts the VPS down in order to avoid resources abuse on the entire node and not to affect the other VPS's.
This is the part that concerns me. As I understood it, the Virtualization software is there to keep you in a box, and restrict the amount of resources that a person can take up so it doesn't affect others. If my server is under heavy load, I can understand if it becomes slow, but I don't find it acceptable for it to be shut down for 4 hours!
Is this usual policy for VPS's? If this is the case, I guess I'm going to have to look for dedicated, because this is not acceptable to me. Although my server is rarely under high load, I don't want to have to worry that it might disappear for hours if it is.
It would be great to hear some opinions from people with more experience in this area than me. If true, this is definitely something people should mention as a disadvantage to VPS's.
View 7 Replies
View Related
Oct 16, 2009
i have a very high load in my node every time i monitor the load i see load average: 8.19 and some times it's go up to 60 - 80
i'm using this server
Intel Core2Quad Q9650
Ram 8GB
Bandwidth: 10000gb
Hypervm Control Panel
and there is only 6 vpses ....
View 7 Replies
View Related
May 18, 2009
My main node load average is:
load average: 485.91, 482.41, 481.80
And its very high!
I checked all vps load is below than 3
So, why main node load is very high?
View 6 Replies
View Related
Feb 20, 2008
I have a cPanel server with 4GB RAM
My server hangs time to time, once or twice a day. This is the last status when it happens.
Server Load 75.90 (2 cpus)
Memory Used 92 %
Swap Used 65.78 %
When I was still inside SSH when it happens, the processes I can see inside "top" are a lot of httpd processes.
So I "killall -9 httpd", I had to do it 30~40 times
#killall -9 httpd
#killall -9 httpd
#killall -9 httpd
x 30~40 times until no pid process found & the server load is back to normal.
Before that, I check httpd fullstatus, they look very normal, same goes to what I see inside WHM Apache status & cpu usage status.
At first I thought it was a memory problem after consulting with a server admin, so I replaced all 4GB new ram stick (such a waste)
View 12 Replies
View Related
Oct 31, 2009
My server is very slow, High CPU, High Apache load....
I got a new server and i had setup a script on it.
No server tweaks has been done.
I run a filehosting site so it gets very slow when traffic is high.
Here is some info:
Code:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4135 filedip 19 0 12812 8892 2212 R 18.9 0.4 0:00.74 index.cgi
3140 apache 15 0 22624 9604 2768 S 17.3 0.5 1:54.45 httpd
3556 apache 15 0 22792 9592 2768 S 17.3 0.5 0:43.53 httpd
3739 apache 15 0 22672 9556 2744 S 17.3 0.5 1:09.67 httpd
3884 apache 15 0 22664 9560 2744 S 17.3 0.5 0:23.98 httpd
3474 apache 15 0 22672 9572 2756 R 16.1 0.5 1:34.09 httpd
3548 apache 15 0 22792 9560 2740 S 16.1 0.5 1:33.67 httpd
3991 apache 15 0 22640 9588 2756 S 15.1 0.5 0:22.44 httpd
3475 apache 15 0 22672 9580 2756 S 13.2 0.5 1:31.42 httpd
3493 apache 15 0 22664 9592 2768 S 12.9 0.5 1:15.52 httpd
3769 apache 15 0 22664 9580 2756 S 12.9 0.5 0:45.19 httpd
3638 apache 15 0 22664 9576 2756 S 12.3 0.5 0:32.82 httpd
3724 apache 16 0 22664 9580 2756 R 12.3 0.5 0:34.25 httpd
3626 apache 15 0 22672 9580 2756 S 11.7 0.5 0:52.54 httpd
4023 apache 16 0 22792 9560 2740 R 11.3 0.5 0:13.16 httpd
3882 apache 15 0 22664 9576 2756 S 10.1 0.5 0:38.56 httpd
3005 apache 15 0 22672 9588 2768 R 9.1 0.5 2:06.61 httpd
I dont know much about server managment...
how to fix this so server doesnt go slow?
View 6 Replies
View Related
Jul 2, 2009
I have a site that is eating up my server resources and need to know what the best solution for this is. I'm thinking of getting another server just for mysql but do not know what specs the server should be to handle the current traffic/database load and have the site run smoothly without slowing down to a snail's pace.
An alternative is to get another server just for the videos being served and leave the database and html on the current server. This is where I'm stuck and don't know what route to take with this.
My current server stats:
Dual Xeon 5130
4GB RAM
250GB
50 Mbit/sec
CentOS 3.9
Website traffic stats:
15,000 visitors/day
150,000 pageviews/day
Serving videos
I've attached screenshots of top and bandwidth usage per day. Hopefully with this information you could tell me if I need another server or if there are any things I can do to the current server to help things move faster.
View 13 Replies
View Related
Jul 2, 2008
I am running in a High load problem lately. I have one of those cheap 1and1 servers which was running fine until 2 weeks ago. Once I rebooted accidentaly, it did not come back with some unrepairable kernel errors and I had to re-image it.
I chose to reimage the server with CentOS 5, for better support. The new re-image worked fine for some days, at least so I thought and now I am having high loads. The server crashes if not monitored every moment as the load is unpredictable.
Just a restart of the Apache will bring the server back to normality, but I am not sure if it is apache or some other script to be blamed.
I have beeing monitoring through apache server-status, but I cannot organize something unusual in the high load moments.
At this moment for example:
top - 09:00:36 up 15:43, 3 users, load average: 3.57, 4.60, 5.32
Tasks: 144 total, 2 running, 142 sleeping, 0 stopped, 0 zombie
Cpu(s): 10.6%us, 6.5%sy, 0.0%ni, 18.7%id, 63.5%wa, 0.2%hi, 0.5%si, 0.0%st
12:00:29 AM CPU %user %nice %system %iowait %steal %idle
12:10:01 AM all 9.14 0.00 5.52 44.66 0.00 40.68
12:20:14 AM all 6.83 0.00 3.98 27.88 0.00 61.32
12:30:10 AM all 6.44 0.00 4.20 81.25 0.00 8.11
12:40:09 AM all 5.25 0.00 4.09 81.93 0.00 8.73
12:50:15 AM all 5.11 0.00 3.79 90.74 0.00 0.36
01:00:07 AM all 7.22 0.00 4.52 57.11 0.00 31.15
01:10:13 AM all 6.89 0.00 4.01 55.38 0.00 33.71
01:20:14 AM all 4.37 0.00 3.27 41.88 0.00 50.48
01:30:25 AM all 4.26 0.00 3.29 63.42 0.00 29.03
01:40:06 AM all 27.18 0.00 4.75 58.27 0.00 9.80
01:50:03 AM all 29.64 0.00 6.61 51.50 0.00 12.25
02:00:07 AM all 27.00 0.00 8.48 55.49 0.00 9.03
02:10:10 AM all 19.29 0.00 4.97 73.80 0.00 1.94
02:20:04 AM all 37.85 0.00 6.78 40.70 0.00 14.67
02:30:05 AM all 15.65 0.00 4.80 68.47 0.00 11.08
02:40:08 AM all 9.06 0.00 5.60 37.49 0.00 47.86
02:50:07 AM all 5.36 0.00 3.62 42.29 0.00 48.73
03:00:02 AM all 6.05 0.00 4.08 47.27 0.00 42.60
03:10:02 AM all 4.22 0.00 3.68 38.17 0.00 53.93
03:20:02 AM all 4.06 0.00 3.75 41.37 0.00 50.82
03:30:22 AM all 4.42 0.00 3.93 45.25 0.00 46.41
03:40:11 AM all 4.34 0.00 3.95 39.58 0.00 52.13
03:50:02 AM all 4.67 0.00 4.01 32.53 0.00 58.80
04:00:08 AM all 3.72 0.00 3.87 28.40 0.00 64.02
04:10:02 AM all 13.49 0.00 6.58 20.82 0.00 59.10
04:20:01 AM all 6.70 0.00 4.63 6.06 0.00 82.61
04:30:02 AM all 1.44 0.00 1.21 4.75 0.00 92.59
04:40:01 AM all 12.42 0.00 8.12 7.65 0.00 71.81
04:50:02 AM all 1.43 0.00 1.07 4.02 0.00 93.47
05:00:02 AM all 1.60 0.00 1.40 8.62 0.00 88.38
05:10:10 AM all 3.80 0.00 3.02 17.86 0.00 75.32
05:20:06 AM all 5.10 0.00 4.22 23.34 0.00 67.34
05:30:02 AM all 1.54 0.00 1.40 11.22 0.00 85.85
05:40:05 AM all 1.75 0.00 1.89 13.12 0.00 83.23
05:50:12 AM all 2.15 0.00 2.22 18.92 0.00 76.72
06:00:02 AM all 1.92 0.00 2.01 12.87 0.00 83.20
06:10:02 AM all 2.27 0.00 2.16 11.53 0.00 84.04
06:20:03 AM all 3.56 0.00 3.02 25.26 0.00 68.16
06:30:10 AM all 2.66 0.00 2.05 18.13 0.00 77.16
06:40:02 AM all 2.58 0.00 2.25 22.87 0.00 72.30
06:50:02 AM all 2.68 0.00 1.92 15.77 0.00 79.63
07:00:03 AM all 3.06 0.00 2.48 26.01 0.00 68.46
07:10:03 AM all 3.65 0.00 3.20 36.54 0.00 56.61
07:10:03 AM CPU %user %nice %system %iowait %steal %idle
07:20:03 AM all 4.40 0.00 3.28 43.86 0.00 48.46
07:30:02 AM all 4.10 0.00 3.17 31.30 0.00 61.43
07:40:06 AM all 7.67 0.00 3.95 50.79 0.00 37.59
07:50:02 AM all 4.72 0.00 3.11 44.30 0.00 47.86
08:00:03 AM all 5.57 0.00 3.72 47.15 0.00 43.56
08:10:07 AM all 10.66 0.00 3.59 71.62 0.00 14.13
08:20:17 AM all 5.67 0.00 3.42 58.81 0.00 32.10
08:30:10 AM all 11.12 0.00 3.49 76.71 0.00 8.67
08:40:03 AM all 7.00 0.00 3.36 47.94 0.00 41.71
Average: all 7.53 0.00 3.76 38.90 0.00 49.81
Some configurations:
The reimage partittioning looks like this:
/dev/sda1 950M 138M 765M 16% /
/dev/sda5 4.7G 1.9G 2.9G 40% /usr
/dev/sda7 63G 58G 5.0G 93% /var
/dev/sda6 4.7G 23M 4.7G 1% /home
none 1.0G 500K 1.0G 1% /tmp
KeepAlive On
MaxKeepAliveRequests 300
KeepAliveTimeout 15
<IfModule prefork.c>
StartServers 10
MinSpareServers 20
MaxSpareServers 50
ServerLimit 256
MaxClients 180
MaxRequestsPerChild 2000
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
skip-locking
query_cache_limit=1M
query_cache_size=32M
query_cache_type=1
max_connections=250
interactive_timeout=100
wait_timeout=20
connect_timeout=10
thread_cache_size=80
key_buffer=64M
join_buffer=1M
max_allowed_packet=16M
table_cache=512
record_buffer=1M
sort_buffer_size=1M
read_buffer_size=1M
max_connect_errors=10
thread_concurrency=2
read_rnd_buffer_size=1M
myisam_sort_buffer_size=64M
server-id=1
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 3
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 4
cpu MHz : 2793.324
cache size : 1024 KB
View 10 Replies
View Related
Nov 8, 2008
I have extremely high CPU load average, but when I run TOP command there are not any process with high CPU
CPU load averages:
211.65 (1 min) 227.29 (5 mins) 247.89 (15 mins)
Tasks: 364 total, 2 running, 360 sleeping, 2 stopped, 0 zombie
Cpu(s): 0.0%us, 0.3%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2065460k total, 2012372k used, 53088k free, 60964k buffers
Swap: 2040212k total, 3280k used, 2036932k free, 619900k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
19871 root 15 0 4944 2488 1656 R 1 0.1 0:02.73 top
1 root 15 0 4208 1320 1136 S 0 0.1 0:01.55 init
2 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0
3 root 34 19 0 0 0 S 0 0.0 0:01.77 ksoftirqd/0
4 root RT 0 0 0 0 S 0 0.0 0:00.01 migration/1
5 root 34 19 0 0 0 S 0 0.0 0:01.16 ksoftirqd/1
6 root 10 -5 0 0 0 S 0 0.0 0:01.04 events/0
7 root 10 -5 0 0 0 S 0 0.0 0:00.65 events/1
8 root 10 -5 0 0 0 S 0 0.0 0:00.00 khelper
9 root 11 -5 0 0 0 S 0 0.0 0:00.00 kthread
35 root 10 -5 0 0 0 S 0 0.0 0:00.15 kblockd/0
36 root 10 -5 0 0 0 S 0 0.0 0:00.00 kblockd/1
37 root 15 -5 0 0 0 S 0 0.0 0:00.00 kacpid
127 root 10 -5 0 0 0 S 0 0.0 0:13.16 ata/0
128 root 16 -5 0 0 0 S 0 0.0 0:00.00 ata/1
129 root 10 -5 0 0 0 D 0 0.0 0:01.15 ata_aux
130 root 10 -5 0 0 0 S 0 0.0 0:00.00 kseriod
158 root 16 0 0 0 0 S 0 0.0 0:00.00 pdflush
159 root 15 0 0 0 0 D 0 0.0 0:01.00 pdflush
160 root 10 -5 0 0 0 S 0 0.0 0:10.68 kswapd0
161 root 11 -5 0 0 0 S 0 0.0 0:00.00 aio/0
So my server is "unresponsive" for abour 18 hours, burst net didnt answer my tickets and I dont know what to do. Ive been with this setup for almost 5 months with no problems, No changes have been made to hardware or software.
Im using Centos 5.0
View 10 Replies
View Related
Jun 24, 2009
My VPS holds about 80 domains and low-use accounts.
Every night, from around 1.30am, the load suddenly skyrockets and will usually be around 5 to 10 for a few hours. Occasionally it'll spike to 30+ for a few minutes.
I had some antispam software running, and a couple of other packages (mail queues, mail manage etc), so I disabled all of that and removed all the crontab entries etc.
It's not really made any difference.
I can see the load stats going back 8 hours, as part of the ASSP spam package (I've just left the ASSP server load cron running just so I can continue monitoring it!)
Can the apparent load on my VPS be caused by other VPS's on the same node?? So in reality, my load is fine but is being affected by other people's VPS's?
I hope that makes sense. I'm 99% sure that my VPS is 'clean' (in so far as cron entries)
I'm asking the question because I took a second VPS on the same node and that one too has high loads overnight when there's nothing running on it (ie, no add-on software, no Cpanel accounts added)
View 9 Replies
View Related
Apr 19, 2009
I have a VPS with LXadmin control panel and 1024 Ram.
the memory always 333-450 but now it is more than 800 and the VPS stopped I restarted it many times but after restarting it the memory gone crazy again.
So, how to know what causes high load and eating my Memory?
View 6 Replies
View Related
Feb 6, 2008
when i install BFD and APF on my server thie processes appears every time on "top" commad on my server and it cuse hight load
------------------------------
4766 root 25 0 100 10:22.56 3.2 165m 130m 420 R grep -vf /usr/local/bfd/tmp/attack.pool.tmp
7747 root 25 0 100 30:20.34 9.8 430m 397m 420 R grep -vf /usr/local/bfd/tmp/attack.pool.tmp
----------------------------
View 1 Replies
View Related
Jun 30, 2007
Just signed up for a VPS with solarvps, which so far is lightning fast compared to my shared reseller account with RZ.
I want to create a script which checks the server load and drops me a text message on my mobile if the server load hits a certain level.
Just wondering what I should consider a high server load?
The server is the JupiterLX UK one from solar vps with over just over 800mb of SLM RAM.
View 5 Replies
View Related
May 11, 2007
Im in a VPS and everyday at the same hour goes very slowly due to high load problems.
The main site is a vBulletin forum and I get this error:
Too many connections
Ive change some details in my.cnf:
Quote:
max_connections=500
max_user_connections=70
But it didnt solve the problem.
This high load occurs at the same hour, I think that it is a cron job related problem, but this is my /etc/crontab
Quote:
# cat crontab
SHELL=/bin/bash
PATH=/sbin:/bin:/usr/sbin:/usr/bin
MAILTO=root
HOME=/
# run-parts
01 * * * * root run-parts /etc/cron.hourly
02 4 * * * root run-parts /etc/cron.daily
22 4 * * 0 root run-parts /etc/cron.weekly
42 4 1 * * root run-parts /etc/cron.monthly
View 5 Replies
View Related
Nov 28, 2007
i was previously using maxclients 256 in httpd.conf and the load was normal even when the server was processing 256 requests..
recently i had changed it to 320 coz of which my load had increased a lot.. Now when i have decreased it back to 256 the load is still high even when the no of requests are just 150..
View 9 Replies
View Related
Mar 18, 2007
i have trouble with transport from company to another company
and i had problem with the best company ( resellerzoom.com )
i order one month this palnt ( Failover Plans ) then i swa this messeage
[PHP]
Hello,
Accounts usage is very high, MEMORY usage is very high than allowed limit of 3% for Daily average. You still have Cpanel/FTp access.
========================
Account usage Daily average
Average CPU%:- 1.23
Average MEM%:- 3.24
Top Process %CPU 58.0
PHP Code:
Top Process %CPU 54.0 /usr/bin/php forumdisplay.phpTop Process %CPU 52.0 /usr/bin/php showthread.php
i asked him what's can i do?
he toled me
PHP Code:
Upgrade to VPS or Semi-dedicated server
i don't want Upgrade vps with same company
View 5 Replies
View Related
Dec 30, 2007
How can you tell if your server was a victim of a DDOS attack? Server load goes so high that you cannot get in via SSH, and the server has to be power cycled to get back online. When it comes back online, load goes back up, we shut apache down, and the let the load come back down and then restart apache and everything is fine. Any way to determine what caused the load to skyrocket? System has APF, BFD, and mod_evasive installed.
View 3 Replies
View Related
Oct 5, 2007
I have 2 servers
Dual Quad Core 5310
One for Mysql and the other one for Httpd
I have one large website , when i put this website in one server i mean by one server is making the website work with mysql and httpd in one server no external server it's load seems to be on 1 - 5 but when i but the mysql on other server the load got high and i got high httpd connections , also when i try to see the the amount connections between the servers it's too high in one of them and low in the other and i am always suffering from load .
here the details
192.168.0.1 the mysql server
192.168.0.2 httpd server
[root@httpd etc]# netstat -n | grep 192.168 | wc -l
453
this the mysql server my.cnf conf
[root@mysql ~]# cat /etc/my.cnf
[mysqld]
safe-show-database
skip-name-resolve
skip-innodb
max_connections = 800
key_buffer = 96M
myisam_sort_buffer_size = 64M
join_buffer_size = 1M
read_buffer_size = 1M
sort_buffer_size = 2M
table_cache = 2500
thread_cache_size = 384
wait_timeout = 30
connect_timeout = 10
tmp_table_size = 128M
max_heap_table_size = 128M
max_allowed_packet = 64M
max_connect_errors = 10
thread_concurrency = 8
read_rnd_buffer_size = 1M
bulk_insert_buffer_size = 8M
query_cache_limit = 8M
query_cache_size = 128M
query_cache_type = 1
query_prealloc_size = 131072
query_alloc_block_size = 65536
[mysqld_safe]
nice = -10
open_files_limit = 8192
[mysqldump]
quick
max_allowed_packet = 16M
[myisamchk]
key_buffer = 64M
sort_buffer = 64M
read_buffer = 16M
write_buffer = 16M
[mysqlhotcopy]
interactive-timeout
[root@mysql ~]#
this the httpd.conf config
Timeout 30
KeepAlive On
MaxKeepAliveRequests 120
KeepAliveTimeout 1
MinSpareServers 15
MaxSpareServers 25
StartServers 15
MaxClients 256
MaxRequestsPerChild 1000
here the total connections in the mysql server
[root@mysql ~]# netstat -n | grep 192.168 | wc -l
25
[root@mysql ~]#
[root@mysql ~]# netstat -n | grep 192.168
tcp 0 0 192.168.0.1:3306 192.168.0.2:47876 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:48923 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:46610 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47142 TIME_WAIT
tcp 0 0 192.168.0.1:3306 192.168.0.2:49209 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:44344 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:44365 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:44359 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:46406 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:44355 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:44352 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:48217 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47208 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:46463 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47229 TIME_WAIT
tcp 0 0 192.168.0.1:3306 192.168.0.2:46459 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47987 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:46469 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:42371 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47259 TIME_WAIT
tcp 0 0 192.168.0.1:3306 192.168.0.2:47252 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:46480 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47275 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47293 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47291 TIME_WAIT
tcp 0 0 192.168.0.1:3306 192.168.0.2:47311 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47304 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47303 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:46530 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:49089 ESTABLISHED
tcp 0 100740 192.168.0.1:3306 192.168.0.2:47318 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47315 ESTABLISHED
tcp 0 0 192.168.0.1:3306 192.168.0.2:47312 ESTABLISHED
[root@mysql ~]#
Do you see the high different number between connections !!
I am sorry for bad english but i am really get more pain daily with the high load
My server kernel
Linux httpd 2.6.18-8.1.8.el5 #1 SMP Tue Jul 10 06:50:22 EDT 2007 i686 i686 i386 GNU/Linux
I use CentOS 5 and httpd 1.3 and php 4.4.7
I try to upgrade them to httpd 2.0 and php 5.2.4 but most users can't browse the site so
i come back to 1.3
View 14 Replies
View Related
Sep 11, 2007
I have upgraded the kernel, I have optimized the my.cnf (mysql), the swap file is free.
The memory is not overloaded even then the I/O wait is too high, the top result is as below
The server become very very slow due to high I/O load, I am failed to dins out the reason. Please help me with the commands so I can sort it out
top - 06:09:17 up 13 min, 2 users, load average: 7.51, 8.26, 5.35
Tasks: 179 total, 1 running, 178 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.7% us, 2.0% sy, 0.0% ni, 0.0% id, 95.0% wa, 0.3% hi, 0.0% si
Mem: 1027536k total, 1014232k used, 13304k free, 114232k buffers
Swap: 2040244k total, 0k used, 2040244k free, 242300k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
3474 apache 16 0 92232 54m 5780 D 0.7 5.4 0:04.01 httpd
2914 named 18 0 39448 4404 1964 S 0.3 0.4 0:01.44 named
3067 mysql 15 0 283m 42m 4288 S 0.3 4.3 0:03.87 mysqld
3826 popuser 15 0 34572 29m 2348 D 0.3 2.9 0:10.69 spamd
3876 apache 15 0 93716 55m 5512 S 0.3 5.5 0:03.41 httpd
7049 root 17 0 10508 2572 1996 S 0.3 0.3 0:00.05 sshd
7161 root 26 10 12712 5804 2656 S 0.3 0.6 0:00.37 mytop
7651 root 16 0 2784 1020 760 R 0.3 0.1 0:00.03 top
7688 popuser 16 0 6068 932 740 D 0.3 0.1 0:00.01 imapd
1 root 16 0 2588 552 472 S 0.0 0.1 0:00.72 init
2 root 34 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0
3 root 5 -10 0 0 0 S 0.0 0.0 0:00.00 events/0
4 root 9 -10 0 0 0 S 0.0 0.0 0:00.00 khelper
5 root 15 -10 0 0 0 S 0.0 0.0 0:00.00 kacpid
19 root 5 -10 0 0 0 S 0.0 0.0 0:00.00 kblockd/0
20 root 15 0 0 0 0 S 0.0 0.0 0:00.00 khubd
37 root 20 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
38 root 15 0 0 0 0 S 0.0 0.0 0:00.03 pdflush
39 root 15 0 0 0 0 S 0.0 0.0 0:00.01 kswapd0
40 root 11 -10 0 0 0 S 0.0 0.0 0:00.00 aio/0
186 root 25 0 0 0 0 S 0.0 0.0 0:00.00 kseriod
415 root 15 0 0 0 0 D 0.0 0.0 0:00.32 kjournald
1606 root 7 -10 0 0 0 S 0.0 0.0 0:00.00 ata/0
1607 root 7 -10 0 0 0 S 0.0 0.0 0:00.00 ata_aux
1617 root 6 -10 2044 448 380 S 0.0 0.0 0:00.01 udevd
1850 root 6 -10 0 0 0 S 0.0 0.0 0:00.00 kauditd
1915 root 19 0 0 0 0 S 0.0 0.0 0:00.00 kjournald
1916 root 19 0 0 0 0 S 0.0 0.0 0:00.00 kjournald
2698 root 15 0 3540 548 456 S 0.0 0.1 0:00.26 syslogd
2702 root 16 0 1564 384 316 S 0.0 0.0 0:00.00 klogd
2729 rpc 15 0 3560 548 452 S 0.0 0.1 0:00.00 portmap
2748 rpcuser 18 0 2348 724 620 S 0.0 0.1 0:00.00 rpc.statd
2774 root 16 0 5944 344 172 S 0.0 0.0 0:00.00 rpc.idmapd
2845 root 19 0 2568 472 264 S 0.0 0.0 0:00.00 smartd
2854 root 18 0 2928 444 368 S 0.0 0.0 0:00.00 acpid
2863 root 16 0 9548 2008 1456 S 0.0 0.2 0:00.02 cupsd
2957 root 16 0 5440 1132 832 S 0.0 0.1 0:00.04 sshd
View 0 Replies
View Related
May 11, 2007
eveyday i see my vps high load
1st problem <<<<
now i show this error for load in CPU/Memory/MySQL Usage
--------------------------------------------
/usr/sbin/mysqld --basedir/ --datadir/var/lib/mysql --usermysql --pid-file/var/lib/mysql/server.nogomhost.net.pid --skip-external-locking
---------------------------------------------
this " mysql " used 90% and 80 % from CPU
And all account used sql 0.0 , why load mysql ?
2nd problem <<<<
some times my vps is down , i don't why
3rd prblem <<<
my vps is not working to some clients , i make allow after user's sent to me ip's by apf program
i'm Disable Backup " Restore only "
View 10 Replies
View Related
Mar 22, 2007
top - 00:21:30 up 4 min, 1 user, load average: 20.30, 6.74, 2.42
Tasks: 221 total, 12 running, 209 sleeping, 0 stopped, 0 zombie
Cpu(s): 33.7% us, 4.4% sy, 0.0% ni, 0.0% id, 61.8% wa, 0.1% hi, 0.0% si
Mem: 1025804k total, 639076k used, 386728k free, 1296k buffers
Swap: 2031608k total, 22584k used, 2009024k free, 23804k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
3359 apache 16 0 30968 16m 5752 S 11.9 1.7 0:00.61 httpd
3065 apache 16 0 31092 16m 5776 S 5.0 1.7 0:01.38 httpd
2478 apache 16 0 29068 14m 5680 S 4.0 1.5 0:00.80 httpd
2822 apache 16 0 28420 14m 5756 D 4.0 1.4 0:00.59 httpd
2810 apache 16 0 31412 17m 5764 R 3.0 1.7 0:01.72 httpd
3111 apache 15 0 29312 14m 5756 D 3.0 1.5 0:00.76 httpd
3787 apache 16 0 29164 14m 5668 S 3.0 1.4 0:00.09 httpd
2816 apache 16 0 31556 17m 5776 S 2.6 1.7 0:01.20 httpd
3063 apache 16 0 29740 15m 5760 S 2.3 1.5 0:01.65 httpd
3226 apache 15 0 31132 16m 5772 D 2.3 1.7 0:01.62 httpd
3007 apache 16 0 29160 14m 5744 S 2.0 1.5 0:00.59 httpd
3058 apache 16 0 31612 17m 5764 S 2.0 1.7 0:00.92 httpd
3064 apache 15 0 30300 15m 5764 S 2.0 1.6 0:01.59 httpd
3481 apache 16 0 29032 14m 5752 S 2.0 1.5 0:00.15 httpd
3503 apache 16 0 29076 14m 5756 S 2.0 1.5 0:00.48 httpd
2589 apache 15 0 28980 14m 5760 S 1.7 1.4 0:00.94 httpd
3069 apache 15 0 30900 16m 5760 S 1.7 1.7 0:01.92 httpd
httpd.conf
Quote:
ServerType standalone
ServerRoot "/etc/httpd"
LockFile /var/run/httpd.lock
PidFile /var/run/httpd.pid
ScoreBoardFile logs/apache_runtime_status
ResourceConfig /dev/null
AccessConfig /dev/null
Timeout 30
KeepAlive Of
MaxKeepAliveRequests 100
KeepAliveTimeout 5
MinSpareServers 8
MaxSpareServers 18
StartServers 10
MaxClients 100
MaxRequestsPerChild 500
View 9 Replies
View Related
Jul 25, 2007
I am using rsync to transfer files (tar.gz) between servers. However, it makes server load increasing 3-4. Normally, server load can be around 1, but when doing the transfer, it can go up to 5+
Is there anyway to reduce the load when doing rsync?
View 14 Replies
View Related
Aug 23, 2007
I am just a beginner and it is about a month that the mysql loads on my server is so high , I have checked the mysql processlist via cpanel and there is no account that takes high mysql and make it high , and even I have checked for any possible rotten databases. but still the server load is so high and I can not control it , even when I restart it just after a minute it goes up again.
just the spamd command takes a high CPU usage sometimes. what it should be from? the spamd for a special account!
I need to optimize mysql , and need help. please do not tell me to hire an expert , just help me thanks
and another question is that how can I check which account is sending spam and stop it?
View 14 Replies
View Related
Oct 22, 2009
I have to move about 50 GB each night from one server to another.
This is the command I'm using:
Code:
/bin/nice -n +19 scp -c blowfish -l 18000 -P 22222 root@XX.XX.XX.XX:/backup/dailybacks/*.tar.gz ./
There is no private lan so i have to use internet. I'm using blowfish, which will reduce cpu load, and also limiting bandwidth transfer, usign -l 18000. How ever, I still do see some high load averages..
Do you have any other suggestion to optimize CPU performance while running scp?
View 6 Replies
View Related
Jun 20, 2009
Why my server - load average is high?
below is output of top:
top - 13:52:53 up 29 days, 5:39, 3 users, load average: 72.05, 68.90, 67.89
Tasks: 857 total, 2 running, 833 sleeping, 20 stopped, 2 zombie
Cpu(s): 4.2%us, 2.5%sy, 0.0%ni, 26.4%id, 63.6%wa, 0.5%hi, 2.8%si, 0.0%st
Mem: 8181908k total, 8135188k used, 46720k free, 35104k buffers
Swap: 4192956k total, 26624k used, 4166332k free, 7321172k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
337 mysql 15 0 327m 56m 4252 S 4.0 0.7 74:18.53 mysqld
24732 root 15 0 13380 1760 808 R 1.0 0.0 0:10.44 top
313 root 10 -5 0 0 0 S 0.3 0.0 90:25.28 kswapd0
22040 nobody 15 0 63148 3272 1572 S 0.3 0.0 0:00.30 httpd
22136 nobody 15 0 63148 3260 1572 S 0.3 0.0 0:00.21 httpd
22291 nobody 15 0 63148 3280 1580 S 0.3 0.0 0:00.18 httpd
22327 nobody 16 0 63148 3280 1580 D 0.3 0.0 0:00.20 httpd
22406 nobody 15 0 63148 3276 1580 S 0.3 0.0 0:00.18 httpd
22522 nobody 16 0 63148 3268 1580 S 0.3 0.0 0:00.10 httpd
23553 nobody 16 0 63148 3244 1556 S 0.3 0.0 0:00.09 httpd
23556 nobody 15 0 63148 3256 1568 S 0.3 0.0 0:00.09 httpd
26260 nobody 16 0 63148 3296 1608 S 0.3 0.0 0:00.13 httpd
26618 nobody 16 0 63148 3244 1556 S 0.3 0.0 0:00.13 httpd
28849 nobody 16 0 63148 3240 1556 S 0.3 0.0 0:00.04 httpd
28903 nobody 15 0 63148 3208 1532 S 0.3 0.0 0:00.02 httpd
29533 nobody 15 0 0 0 0 Z 0.3 0.0 0:00.02 httpd <defunct>
29558 nobody 15 0 63148 3236 1548 S 0.3 0.0 0:00.01 httpd
29587 nobody 15 0 63148 3216 1536 S 0.3 0.0 0:00.01 httpd
29592 nobody 15 0 63148 3208 1532 S 0.3 0.0 0:00.02 httpd
1 root 15 0 10344 576 544 S 0.0 0.0 0:05.36 init
2 root RT -5 0 0 0 S 0.0 0.0 3:58.90 migration/0
3 root 34 19 0 0 0 S 0.0 0.0 6:15.52 ksoftirqd/0
4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
5 root RT -5 0 0 0 S 0.0 0.0 0:12.33 migration/1
6 root 34 19 0 0 0 S 0.0 0.0 0:30.07 ksoftirqd/1
7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1
8 root RT -5 0 0 0 S 0.0 0.0 0:02.57 migration/2
9 root 34 19 0 0 0 S 0.0 0.0 0:02.84 ksoftirqd/2
10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2
11 root RT -5 0 0 0 S 0.0 0.0 0:11.61 migration/3
12 root 34 19 0 0 0 S 0.0 0.0 0:01.12 ksoftirqd/3
13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3
14 root 10 -5 0 0 0 S 0.0 0.0 0:00.22 events/0
15 root 10 -5 0 0 0 S 0.0 0.0 0:00.10 events/1
16 root 10 -5 0 0 0 S 0.0 0.0 0:00.16 events/2
17 root 10 -5 0 0 0 S 0.0 0.0 0:00.09 events/3
18 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 khelper
87 root 10 -5 0 0 0 S 0.0 0.0 0:00.03 kthread
94 root 10 -5 0 0 0 S 0.0 0.0 0:00.78
View 14 Replies
View Related
May 7, 2009
do you know what my server having very strange problem my server load suddenly increas after every 2 or 3 days some time after 1 days but when we talk about those days in which server load is fine then that time server load very low almost 0.4 to 0.1 .
But on that high load day server load reached upto 500.
when i try to find out what wrong then i only get that there is too much connection of http when i kill httpd through this killall -KILL httpd then server load suddenly decrease and then stable.
View 12 Replies
View Related
Jun 16, 2009
I have a VPS with Future Hosting and recently I have been getting more and more notifications from LFD regarding high CPU load. For example:
Time: Sun Jun 14 06:50:48 2009 -0500
1 Min Load Avg: 9.47
5 Min Load Avg: 6.25
15 Min Load Avg: 3.68
Running/Total Processes: 2/105
I am getting at least one of these a day now and I am also getting alerts about services failing, SPAMD in particular but also EXIM (and messages about LFD being unable to determine the exim queue length). External monitors are also warning me about SMTP timeouts during the same time period that I get the "high load" errors.
Tech support seems a bit stumped by this one and ALWAYS come back with "load looks fine right now". With the frequency of the warning emails increasing I am getting very concerned about the stability of my VPS.
I am not running anything significant on my VPS yet with minimal visitors and load (RAM usage consistently stays below 300MB on a VPS with 1+GB RAM.
View 3 Replies
View Related
Mar 26, 2009
I've search around quite a bit, but I can't seem to find a clear answer.
I've turned on mod_status, and on the status page, I'm worried Apache is being overworked.
Code:
CPU Usage: u334.883 s94.5703 cu177.422 cs0 - 43.3% CPU load
54.1 requests/sec - 181.5 kB/second - 3435 B/request
178 requests currently being processed, 52 idle workers
__RKKK__K___KW_CKCKC_KC_KCK_KKCCK_K_KKWCKCCKCWKKKCRCKKKK._K_C__K
KK_K__K_K_KK_C_KKKKK_KKW.KRCKWKKW_CCKWKRK..___KKCKKKKKKKR_KKKW.W
_KK_____RKRC.KKCKCCRK__CK._KWCK_KKRCCK.C__CR.CWCCKCRKK.RR.K_CR_K
C_KW._._K.K..KKK_KRCCKWKK__..R.CRWCKK.KCK.K.KK_K....._...KK.....
......KC.CK...C...CK......W........C............................
................................................................
................................................................
................................................................
At the time I took this particular snapshot, it's not near its peak... it's not uncommon for the CPU load approach 60%. Reading around, it seems the CPU load should normally be under 1% (such as 0.0139% or what-not). Is this true?
The weird thing though... I have no idea where that number is coming from, because according to "top", the CPU is actually 90% idle.
Here is my Apache MPM settings:
Code:
ServerLimit 512
<IfModule mpm_prefork_module>
StartServers 10
MinSpareServers 15
MaxSpareServers 50
MaxClients 1024
MaxRequestsPerChild 0
</IfModule>
I actually just raised the MaxClients from 512 to 1024 because I was hitting a constant cap of 40 requests/sec... and I was worried it was going to bottleneck. When I raised that value, the max requests per second now seem to be freed up.
If the actual CPU of the server is 90% idle... am I okay? Anyone know where Apache's getting the CPU Load info from?
View 13 Replies
View Related
Nov 2, 2008
My server is running slow, and some process are using high % of CUP.
Please take a look at the screenshot, and also tell me if it's normal to have : /usr/local/apache/bin/httpd -DSSL running as nobody and root, and what is this command ?
View 4 Replies
View Related
Mar 11, 2008
I have a dual xeon server that host around 15 small website, but these days I see that the load generated from mysql is very high as you can see below is consumes 32.6 CPU
mysql 32.60 1.20 0.0
how I can know what is the cause of this load?
View 11 Replies
View Related
Mar 17, 2008
We have a Dual opteron 275+4G ram box.
PHP4+EA+CentOS+Cpanel installed
Normally, load is 2 as long as we do not perform any action on WHM
However, whenever we create/suspend/terminate an account , load burst to 25 and then httpd goes down
Admins say it is hardware issues, which does not sound right to me
View 14 Replies
View Related
