Switch Suggestion, 1000Mbps Ports, 2 X 1Gbps Uplinks, Simple Layer 3

Jun 24, 2007

I'm investigating "suspects" that could be used in a server access environment. My requirements are:

*24 or 48 10/100/1000 Mbps Ports
*Atleast 2 x 1000Mbps uplinks (fiber preferred)
*SNMP-enabled for remote bandwidth polling @ ports and uplinks
*Simple Layer 3 allowing for per port rate limiting
VLAN creation support would be a plus, but not required

The switch needs to be able to handle ~1000Mbps of constant usage

I would be open to using non-Cisco switches as well.

View 9 Replies


ADVERTISEMENT

Colo Layer-3 Switch...

Dec 27, 2007

I currently have a rack of gear in a nice colo. At first this colo was established to provide for some of my own equipment. However, in the past year or two I have had several customers express interest - so I have started reselling some colo space to them.

Currently I have three network feeds from the provider coming into my cabinet. I am about to add a 4th feed. All of these feeds have been added so that my customers could have a dedicated connection to plug into their hardware firewalls.

Since I am growing and about to add a 4th customer, I am now trying to figure out how to simplify this, and better provide for future growth. I am thinking that the best way would be to have one "feed" from the provider. Then I would bring that one feed into a layer three switch which I could use to break the feeds out to my customers. This would also allow me to measure the bandwidth being used by each customer and bill them accordingly.

Does this sound right to you all? Also - any recommendations on a good layer-3 switch?

View 14 Replies View Related

Search For Reliable Layer 2 Switch

Nov 4, 2007

i have two servers colo on the IDC,

i want to search for a Layer 2 Switch for them,

the bandwidth we use now is about 5-10Mb only.

i hope the switch is reliable,but not expensive,

i do not need a lot of feature,just reliable for the connection for my service.

i find some cheaper switch,like d-link,ProCurve,

View 7 Replies View Related

Simple And Reliable Switch

May 14, 2008

i want to set about 3-5 servers behind a switch,

the purpose of the switch is just for sharing bandwidth for the 3-5 servers,

i do not need any special feature,for example,mrtg,limit port bandwidth,...etc,

it run about 5-10M only,

i just hope it is reliable and cheap,

can you recommend any switch suit for my needing?

View 11 Replies View Related

SNMP Monitoring Software For Switch Ports In Your Data Center

Jan 8, 2008

We currently have a OK solution to monitor and graph our client bandwidth at the switch port. It's a great product, but we have been expanding quickly and we are looking for a solution that is a bit more scalable and user friendly. Any recommendations?

Basically we want software to do the following:Monitor/log bandwidth in/out
Graph data in some way shape or form
Provide a web interface for users to login and view bandwidth usage
Scalable and cost effective
Easy to use
Windows or Linux

If you don't feel comfortable divulging what you use, just PM me. Also, we are already aware of MRTG.

View 4 Replies View Related

100mbps Vs. 1000mbps

Jan 2, 2009

Let's say I have a site that gets around 500,000 page views per day, has an average of 150 - 200 users online at any given time, and runs 1000+ queries per second. Should I stick with a 100mbps uplink speed, or would I be able to see a difference with a 1000mbps speed?

View 14 Replies View Related

Myip:0 -- Mixing * Ports And Non-* Ports With A NameVirtualHost Address

Mar 2, 2008

i have one problem in cpanel take one error for restart httpd

xx.xxx.xxx.xx:0 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results

View 2 Replies View Related

1000mbps Uplink Provider

Aug 22, 2008

Well i need for a week some provider who can setup a spare server/vps with 1000gps uplink , to maybe convince my college to get in contract and get better providers, instead of hosting the college site on our in-house machines. Since the loading speed of site is awful ! So am thinking of trying out for only a week the machine from that provider, and if am able to convince the department to maybe get into some contract with me (who in turn will be than using that provider for getting the server).

So if anyone around wht knows someone who has spare box for a week with 1000mbps uplink would be great.

Please note, no mysql is required, just simple apache, and no traffic, just 1 or 10 hits in the entire week.

I was told that there are some companies out there that provide universities free hosting, so if anyone is aware of such company do let me know please.

View 9 Replies View Related

1Gbps Dedicated Line What Does That Mean?

Jun 28, 2008

I do not understand what network: 5 mbps and the traffic 1Gbps mean

=========
CPU Intel Core2-Duo E4500
2.2GHz-FSB 800MHz -L2 2MB

RAM DDR2 PC2-5300 (667Mhz) 2GB
HDD SATA2 250GB (7,200rpm)
LANcard Intel PRO/1000 PF Server Adapter
Rack Type 1U (4.5cm)
Network: 5Mbps
Traffic 1Gbps Dedicated Line
=======

View 12 Replies View Related

Any Cheap 1gbps Unmetered Providers Out There

Sep 5, 2008

We host a huge image host that is spread across 3 dual xeon machines on 100mb unmetered machines.
Each machine uses up about 12-15TB a month and we need more.

I've seen some sales lately with 8 core machines on 1gb unmetered ports.
We don't need management but we do need a SLA as we are going to put all of our "eggs" in one "basket".

My question is: can you guys recommend a cheap 1gb unmetered provider?

We will need a 8 core machine with 8gb ram and at least 2x1TB drives and we will use at least 80TB a month of bw (80% out going and 20% in going).

I tried OVH but seems they cap it at 100mbs average which isn't good enough.
Also looked at FDC but seems the prices are 3xtimes more then EU based machines.

I'm ok with EU/US machines as customers are from US and EU.

View 14 Replies View Related

Who Has The Best 1gbps Dedicated Colo Offer

Mar 12, 2008

I'm looking to get a 500mbps or a 1 gbps dedicated colo plan for 2 streaming servers.

View 14 Replies View Related

Router Suggestion - Hundreds Of Peers

Jul 22, 2009

for a router than can handle a couple hundred BGP peers, but will not necessarily be pushing a lot of traffic. The router should be able to handle 200-400 BGP peers, but will only need to push around 2-3 Gbit/sec.

What would anyone recommend for this specific configuration?

I am willing to spend whatever is needed, though I also don't want to just be throwing more money at it than I need to to get the job done effectively.

View 13 Replies View Related

Cheap Dedicated Server With 1Gbps Shared Connection

Jul 14, 2008

I currently have godaddy dedicated server and the 100mbps connection is shared with other servers, and I pay about $120 a month. I normally get an average of 30mbps out of it. Do you guys know of any cheap hosting companies that offer dedicated servers with a 1Gbps shared connection? And the main point I'm trying to get to is, do you guys know of any web hosts that would be faster than an average of 30mbps, even if they're only 100mbps shared connections? I'd really appreciate any potential hosts you guys can direct me to that are pretty fast.

View 3 Replies View Related

Mod_evasive Suggestion For High Traffic Server

Mar 12, 2008

The server gets around 25k unique visitors per day, but one website in particular allows hotlinking and uses a lot of bandwidth. Last time I checked...according to whm apache status page, I was getting 180 requests per second. Not sure what time it was though. So it might be higher at a different time of the day.

Recently got mod_evasive installed, but I didn't want it to block out legitimate users. Currently it's set to this...

<IfModule mod_evasive20.c>
DOSHashTableSize 3097
DOSPageCount 5
DOSSiteCount 100
DOSPageInterval 2
DOSSiteInterval 2
DOSBlockingPeriod 10
DOSBlockingPeriod 600
</IfModule>

what a better configuration would be? When I run the log I already see it block out a bunch of IP's. I don't want to lose any visitors to this program, but I do get ddos a lot.

View 1 Replies View Related

Layer 2-4 DoS Protection

Apr 5, 2009

What exactly does the DoS protection layer 2-4?

in which attacks are successful.?

View 1 Replies View Related

Cage Space Hardware Suggestion Seattle Area

Jun 24, 2009

We are looking to install hardware barriers for caged spaces.

We were hoping not to use cyclone fencing.

Would like to use a solution aesthetically appealing without going completely over budget.

View 4 Replies View Related

2+ Years Experience - Blurstorm (review) - Need Suggestion For New Hosting

Aug 5, 2008

I've been with Blurstorm for 2+ years and I can say alot of good thing about the company and support. I even gave them a 5 out of 5 of webhostingjury and went as far as to say I would give them 10 out of 5, so you can imagine how happy I WAS with their service until this past week.

I has been an absolute hell. First the server kept blocking my ip and locking my session, when I would try and upload files with filezilla. They suggested to try a different ftp software which I did and it worked. At first I thought it was my computer/isp/router, so I tried it from my friend computer, same thing. And by the way, I never had this problem before. So I didn't make a big deal out of it, even though I prefer filezilla.

Now a couple of days ago, seems every time I would browse the pages or try and use the admin section the site would go down, or at least that's what I thought. After sending 8 hours going back and forth with support(Robert) through their support ticket system, because there is not live chat, Robert tells me there is nothing else they can do because they dont see any errors happening and I would have to pay a 3rd party monitoring service to find out what the problem is.

I mean I completely understand that if they cant find the problem but the site was working couple of days ago and I havent done anything different, so something must of happened on their end. Also I uploaded the site onto a friends server with a different hosting company and the site works perfectly with no problems.

Now being left high and dry with no help from Blurstorm, I did a couple of more test and found out that the site was not down but was blocking my ip and locking my sessions and the only way around it was for to renew my ip and to try again, but that would only help me for a couple of mins before it locked it again. Again, I also tried it from my friends computer and same thing. So I know for a Fact that it has to be from Blurstorm's end. I told that the server was blocking my ip and locking my session and haven't heard from them for over 16 hours, which is horrible customer service compared to the way they were before.

The main reason I stayed with blurstorm was for their support and quick response and I've referred them a boat load of business, and this was not the first time i've had problems with the server and support but I didnt make a big deal out of it and from now on no more referrals.

Well there is my review, sorry it's a little lengthy but just wanted to give an indepth review.

Second part - need suggestions for new hosting

From what I've gathers from searching that are reliable

precision effect
jaguarpc
innohosting

which would you recommend from those or any others?

And my site is based on joomla 1.5 + virtuemart so it should work with it.

View 15 Replies View Related

Defrag Software Suggestion For Windows 2003 + Plesk 8.3

Jul 31, 2008

I run a small hosting company, I just upgraded to a new windows 2003 server with plesk 8.3 at Serverbeach, I am wondering what everybody is using to defrag their hosting servers, the windows defrag? diskeeper?

View 7 Replies View Related

The Grid Layer - Reloaded

Dec 20, 2007

3Tera's AppLogic could be the expeditor of a lot of small and medium dreams. I read the whopping 28 pages thread about TGL, it sure got my juices running. With enough time, the grid could evolve into something close to a Matrix (and hence the thread title).

Yet it seems it wasn't stable yet (at that time). And 3Tera and TGL were talking about features yet to come. So my question is:

Is their service stable yet?

View 14 Replies View Related

Savvis / Layer 3 Status

Aug 31, 2007

Anyone else seeing packet loss / high latency? I was told that Savvis and or Layer3 are having some routing issues tonight.

View 4 Replies View Related

Max Load Of HP 2848 In Layer 3 Mode

Jun 7, 2008

From the real experience, how many mbps can it process in layer3 mode with 10-20 VLANs?

View 8 Replies View Related

Reasonably Priced Colocation Provider With Similar Private Network As Soft Layer's

Jun 9, 2008

Is there a colo provider that has a free private network for use between their locations, similar to what SL has for their dedicated servers between facilities? They have 10GigE between their locations, with free unlimited usage.

We have around 40 servers now, and colo would really make sense, but we are doing multicasting stuff so we really need a backend network to support our services, as well as many locations for better delivery quality.

View 10 Replies View Related

Use Two Switch To Do HA Avoid Switch Fail

Sep 18, 2009

a sales told me i can buy two switch and do series connection,

then if one fail,another will continue to work,

it will take high HA,

but i still can not understand how to do it and work,

could you know what it is?

View 3 Replies View Related

Simple CDN

May 30, 2009

anybody have any experience with SimpleCDN. We are considering using their Hurricane service to stream our media.

View 4 Replies View Related

DTH Is Simple Great

May 27, 2009

Because i have couple site hosted by both hosting company (DTH=downtownhost and TCH=totalchoicehosting) and have positive experience with them i needed to make decision who will be hoster for my new project.

The problem was by both company and by 99% others that traceroute command is not enabled by default and it is essential for my new project.

After exchanging a couple emails with both companies DTH was winner again because DTH allow on shared hosting traceroute command (in situation that you need it).

Answer from TCH was that only on VPS (semi-dedicated) is traceroute command possible and not on shared envirovment.

I must again praise DTH for the way how they handle with their customers and that they are ready to do everything for their customers. Not wonder that they are one of the greatest hosting company.

View 10 Replies View Related

Where I Can Get A Simple SSL Certificate

Aug 29, 2008

where I can get a simple SSL certificate for my web hosting business? So my customers feel safe on submitting their information. Is the standard SSL from GoDaddy pretty good?

View 14 Replies View Related

VPS Down After Simple Reboot

Jan 23, 2007

So I was trying to run a backup process in Plesk 8.1 and the whole panel froze up on me (it's happened numerous times before).

Anyway, since the panel was all frozen up I just went into SSH and did a simple "reboot" (also, as done before many times). Only problem is, this time after I did the reboot the server never actually came back online... it seems to be locked up or something, I have no idea what.

I called my host and they are looking into it but they have no idea what's going on either and it's taking them forever to figure it out all the meanwhile my sites are down.... this isn't good.

Does anyone have any suggestions or advice as to why this could be occuring?

View 2 Replies View Related

Simple SSL Doubt

Sep 4, 2007

I have an ssl issued from my domain company and i have hosting in another company.

I have created an CSR with my hosting, submitted to mine domain company so i can have the ssl, and installed in my hosting company.

But now i want to change mine hosting because the hosting company doesn't accept chained certificates..

So if i change mine hosting i could mantain mine old ssl ? or what does i need to do?

View 6 Replies View Related

Simple Ftp Command

Jul 24, 2007

using ftp via unix command, how do you get all files and sub directories?

get *.*? but will that get sub dir?

btw, how do you get it to switch between ascii and binary for images? does it do that automaticly?

View 1 Replies View Related

Simple Request

Jun 12, 2007

Can you see if my site will load for you:
[url]

Then (if it loads) post the stats from the bottom of the page:
Page creation time: (Numbers)

And:
Your Os:
Your Browser:

Some people say my site won't load or is loading slowly for them, but I have no one to test it, thanks. If possible, I need quite a few tests.

View 4 Replies View Related

Experiences With Simple DNS Plus?

Oct 3, 2007

We are looking at this software. Seems easy enough, secure enough.

Experiences with Simple DNS Plus?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved