I do not understand what network: 5 mbps and the traffic 1Gbps mean
=========
CPU Intel Core2-Duo E4500
2.2GHz-FSB 800MHz -L2 2MB
RAM DDR2 PC2-5300 (667Mhz) 2GB
HDD SATA2 250GB (7,200rpm)
LANcard Intel PRO/1000 PF Server Adapter
Rack Type 1U (4.5cm)
Network: 5Mbps
Traffic 1Gbps Dedicated Line
=======
I'm looking to get a 500mbps or a 1 gbps dedicated colo plan for 2 streaming servers.
View 14 Replies View RelatedI currently have godaddy dedicated server and the 100mbps connection is shared with other servers, and I pay about $120 a month. I normally get an average of 30mbps out of it. Do you guys know of any cheap hosting companies that offer dedicated servers with a 1Gbps shared connection? And the main point I'm trying to get to is, do you guys know of any web hosts that would be faster than an average of 30mbps, even if they're only 100mbps shared connections? I'd really appreciate any potential hosts you guys can direct me to that are pretty fast.
View 3 Replies View Relatedi'm trying to look for a reliable server host where i need 1 Xeon server with a dedicated 100Mbps private bandwidth, can anyone advice or provide some kind of price quote so that i know what kinda range i'm looking at? i got sth from burstnet which is around 1300$/month for 100Mbps private.
View 3 Replies View RelatedI have a client who subscribed for a 1 Mbps dedicated line, he is getting about 900Kbps max, he insist that the datacentre is cheating on him. Datacentre reply
The bandwidth test is done remotely, which bounds to have lost of bandwidth in internet traffic to the remote site including the download test probable taking off about 100Kbps. 1mb bandwidth is base on IDC to POP
Is it reasonable to expect exactly 1024 kbps? Whats the loss to be estimated for overheads?
We host a huge image host that is spread across 3 dual xeon machines on 100mb unmetered machines.
Each machine uses up about 12-15TB a month and we need more.
I've seen some sales lately with 8 core machines on 1gb unmetered ports.
We don't need management but we do need a SLA as we are going to put all of our "eggs" in one "basket".
My question is: can you guys recommend a cheap 1gb unmetered provider?
We will need a 8 core machine with 8gb ram and at least 2x1TB drives and we will use at least 80TB a month of bw (80% out going and 20% in going).
I tried OVH but seems they cap it at 100mbs average which isn't good enough.
Also looked at FDC but seems the prices are 3xtimes more then EU based machines.
I'm ok with EU/US machines as customers are from US and EU.
I'm investigating "suspects" that could be used in a server access environment. My requirements are:
*24 or 48 10/100/1000 Mbps Ports
*Atleast 2 x 1000Mbps uplinks (fiber preferred)
*SNMP-enabled for remote bandwidth polling @ ports and uplinks
*Simple Layer 3 allowing for per port rate limiting
VLAN creation support would be a plus, but not required
The switch needs to be able to handle ~1000Mbps of constant usage
I would be open to using non-Cisco switches as well.
Im trying to zip up an sqlite database backup.
I execute this command
Code:
zip ../d/db/backup.zip ../d/db/09-02-15.sqlite
backup.zip never appears. Instead, I get some random filename in the directory. Like ziOHokOw
If I try to zip a smaller file(last weeks backup) everything runs fine?
Code:
zip ../d/db/backup.zip ../d/db/09-02-08.sqlite
So the 134mb file zips fine, but the 200mb one seems like its failing and im left with some type of temporary file. I tried downloading the weird filename and unzipping it. It has partial info like directory structure, the filename but the actual file inside is corrupt.
I found this line in my crontab file
0 7-23/3 * * * top.sh
when it's running?
and what is it doing?
What is the Command Line, hoe do I get to it, when I do how do I update Perl to 5.88
View 5 Replies View Relatedto append the directory that the accounting.php.inc file is located in to the open_basedir line.
How do i do it, where n how do i make these changes.
i have a win 2003 server and iis6
i have about 300 sites i will change my internet line
to change all web sites ip's to new ip in iis how can i do that?
I remember some companies were offering servers on 1 gbit/s line and 10 TB of bandwidth for $100/month. Or did I dream this one up?
iweb was offering 10 TB/month servers for $99 (I don't remember if it was 100mbit/s or 1 gbit/s line though), they don't seem to offer this anymore.
This is our setup: We have two locations about 120 miles apart. We have direct connection with a T1 line.
My question: How much safer is our data passing through the same T1 everyone else is using. Most people sending data through the same T1 line are using ISP, so are safer by not using an ISP? .........
What command could I use to get the last line of an output?
Heres why...
I use this command:
netstat -plan|grep :80|awk {'print $5'}|cut -d: -f 1|sort|uniq -c|sort -nk 1
I would like to get just the last line of the output, the output looks like this:
1 203.118.105.*
1 80.195.165.*
1 87.211.51.*
1 91.40.90.*
8 82.2.222.*
213
The reason is because I'd like to get that last figure to place into a file on a certain time period (through a cron), which will then be graphed with PHP.
Got a centos / cpanel box. Had to change the block of IP's with an entirely new block of 8. Problem is I cannot access cpanel/whm due to this, but only via ssh. If I run the below, it shows the old IP's
/etc/init.d/ipaliases start
How do I replace the old block with the new? I've never done it via command line before.
if anybody in the community looks for trixbox as the os to be installed on a dedicated server. I am looking for a new line of servers to provide and i am thinking that Trixbox could be one of them.
View 0 Replies View RelatedI've a rack in the datacentre, and actually sharing the ethernet line with another partner's rack.
Something like:
Bandwidth -> Switch 1 -> Switch 2 (partner's rack)
Bandwidth -> Switch 1 -> Switch 3 (my rack)
After a previous uplinks issue, i'm never able to hit above 4Mbps of download speed to my home's cable broadband anymore. I have no idea whether it's because my partner capped my bandwidth from Switch 1, or his usage has increased such that it's affecting my traffic too. I can't be too concerned about it with him, as he's paying the bulk of the bandwidth costs.
For the whole rack, i'm not able to hit above 5Mbps accumulatively, and my normal bandwidth usage is only about 1-2Mbps.
So i'm thinking of getting another line for bandwidth directly from the datacentre to my Switch 3, perhaps starting from just 1-2Mbps only.
How will things improve? Just a silly thought, whether my total available bandwidth can now be 5Mbps + 2Mbps = 7Mbps.
I posted this problem in the PHP forum without a response. I thought this forum might be better.
View 0 Replies View Relatedhow to reset a password via a single line command? Or script? To make it automated?
View 14 Replies View Relatedhow i can install SVN by command line on centos OS
View 1 Replies View Relatedis KVMoIP like Remote Desktop or is it just command lines?
View 5 Replies View RelatedI just moved to a new server and latly I've seen my mail going out like this:
071 Subject: =?iso-8859-1?B?U3BlZWRFYXJuZXIgUG9pbnQgRW1haWwgZm9yIHJhZmFu?=
039* Return-Path: Fast_Lane@XXXX.com
074F From: "=?iso-8859-1?B?U3BlZWRFYXJuZXIuY29t?=" <Fast_Lane@XXXX.com>
Using Exim 4 and that was the same as my old server. I also moved the exim.conf file over to the new server to see if that would fix it, but it didn't.
This is my current hosting
Virtual Server - $60/Month
100GB disk
1 CPU
512MB dedicated RAM
768MB shared RAM
100mbit unmetered connection
Now, I totally bombed the b/w. I am looking for a webhost that will allow 50-60mbps.
I will be hosting anime, which is unlicensed.
I have a load of PHP files that need trimming down, so for example
Code:
<html>
<?php
$loads_of_stuff = 1231231;
?>
</html>
change to
Code:
<html>
<?php
$loads_of_stuff = 1231231;
?>
</html>
There are 000's of lines, so some awk command or something similiar would be great to execute on each file.
I have been looking around for a new shared host, I am currently with GoDaddy =( And it would be helpful to have command line access for some things I am trying to do.
Particularly with Zend Gdata API (which GoDaddy has trouble with anyway) Is this reasonable to ask for? I also need at least 150GB/month bandwidth for some relatively high quality streaming video.
We have a dedicated server, with chroot access enabled.
We are wanting to backup each site on this server, as well as all mysql dbs on a weekly basis.
Is it possible for us to run a cron job to do this? If so, what commands would we want to use?
We have a local FTP server here, so would like to ftp these backups this machine.
I know it all sounds a little vague, but I just need to know where to get started.
I'm running CentOS with a postfix mail server.
I haven't experienced mail problems on other CMS systems - so the basic setup should be working okay - but apparently not that well.
I get the famous emailer.php line 234 error when some users send PMs to each other... The PMs go through, but the error is annoying none the less.
Does anyone have a decent solution for this?
The phpbb community advise to make a Google search (http://www.google.com/search?q=configuring+php+mail ) or use SMTP just don't do it for me - and I don't want to leave some big hole for spammers.
This might win me the "stupidest idea 2008" award but I was wondering..
I have an active ADSL line at home but I don't have an active account at an ISP.. Could I somehow get Internet access through my VPS (for a week or so, till my new ISP activates my account)?
Back in the day, there was a commandline version of 'ntop' allowing a view of live traffic stats in the format of 'top'.
Does a similar tool exist today effectively allowing us to figure our which VPS or IP address is under DDoS attack?
The only way I could fix this was via KVM access to netstat -an | grep etc... Not too