Slow Downloads
Apr 28, 2009
I own the website [url]and it's hosted at Host Excellence. Recently there have been some downtime periods, and most importantly, I have noticed that downloads are very slow. For instance, when I download a file such as [url]I get an approximative transfer rate of 100-150 KB/sec (whereas most other sites download at 500 KB/sec or more). First of all I'd like to know if you guys get similar results, and what do you recommend? I have contacted my host about it, they seem to deny the problem. Should I switch? What to? I need something reliable and fast.
View 14 Replies
ADVERTISEMENT
Sep 12, 2008
Is anyone else experiencing slow downloads on midphase dedicated servers in the softlayer dallas datacenter?
I'm getting 1/2 my connection speed from it, with softlayer server I get about 6.4mbps with midphase i'm getting only around 3mbps.
You can do a speed test here from it ....
View 14 Replies
View Related
Apr 8, 2009
I ordered a new server from iWeb a few days and after I transfered everything and was stating to set everything up I noticed that I as only getting about 1/2 of my download speed from both of my iWeb servers.
Is anyone else experiencing slower then normal downloads from iWeb?
Normally I could max my connection out at 2.1 MB/s now I can only get about 800 KB/s - 1.0 MB/s
View 9 Replies
View Related
Nov 11, 2008
I've got 25 domains on a Virtuozzo/Plesk8.6/CentOS5 VPS. Each domain has one up-to-date install of WordPress, most have very little traffic (average 200mb per month), maybe 2 domains get 5-7gb traffic per month.
I monitor port 80 connections and rarely see more than 10 at a time.
That should in my opinion be no problem at all for a VPS with 768mb guaranteed ram and 2.4ghz cpu. I've got 30gb hard drive spare too.
But.... about 8 or 10 times a day it grinds to a complete halt: server load at 500-1000%, sites timing out, plesk takes 3mins to load, often I can't even connect with SSH, and the plesk web server, apache
INSERT INTO module_watchdog_sys_stat (time, type, value, service_id) VALUES(FROM_UNIXTIME(1226404705), 'MAINMEM_USAGE', 17472, 11);
80 seconds sounds like a huge amount of time for a MySQL insert to me! Does anyone know if this is likely to be the cause of my trouble? Some problem with Plesk and the database? Or could it be something else?
View 3 Replies
View Related
Jan 30, 2007
I've come across something that has stumped me. A client who has pdf files download fine when using firefox but using IE 6 or 7 prompt to save a tar file which does not open properly.
Example: [url]
Direct link: [url]
Has anyone experianced this or seen this?
View 4 Replies
View Related
Mar 12, 2008
My clients in LA - those on AT&T and Time Warner in paticular - are having bad download speeds from my server with Softlayer. Anyone else having similar trouble? Clients who normally get 500-700kb/s down are getting < 50 kb/s down, even early in the morning when the total traffic on my 100mbps port is under 1.5mbps.
Basically, east coast is fine, and anyone with a T1 in LA is fine as well - it's just DSL and Cable modems in LA that are screwed up. In fact, one of our are clients is using Apple Remote Desktop to connect to a remote client with a T1; it's faster to through Time Warner, then VPN to Verizon, and then connect Softlayer and back again than to go directly from Time Warner to Softlayer, which is really weird.
View 14 Replies
View Related
May 18, 2008
My site is hosted on siteground, and i offer a few mp3s for download on my site. But, when my visitors download the songs, only a part of the song is downloaded, not completely. Siteground says this problem is about the apache server limitations on the http protocol downloads.
Can any user defined apache handler be defined to increase the http timeout value? I am on shared hosting.
View 1 Replies
View Related
Nov 20, 2007
i have alot of files on my server, each of one more 60 mb
can i limited download
so when somebody download file cant download other file in same time?
and pervent using if programme to download?
and also now
Server Load 0.94 (2 cpus)
Memory Used 50.9 %
Swap Used 5.59 %
and i see in top
/usr/local/apache/bin/httpd -DSSL
many time and kill the memory
all thing about my server here
[url]
View 6 Replies
View Related
Mar 9, 2009
I'm selling downloads of music files. The zip files are quite large. I've had several people complain that they get a message that the server resets their connection before the download finishes.
What can I do to allow these large downloads?
I'm on IIS.
View 21 Replies
View Related
May 28, 2008
My new server speed seems very low. The downloads are taking too much time. While downloading the os templates I am getting the download speeds in the range of 30K/s - 40k/s (Max 100 K/s)
I have another server in this DC and havent this problem on this.
I send an email to datacenter about this issu and they sayd:
Code:
Dear Mr Yarmohammadi,
I just checked the switch configuration. Could you please look for the
configuration of the network card in your server and if it is in 'Full
Duplex'
mode?
If not, please try and configure it in this way, maybe it already is,
because the switch just changed to 100 MBit FD in automatic configuration
mode.
View 5 Replies
View Related
May 11, 2008
I am wondering if simultaneous downloads could take up a lot of CPU/Ram usage? Could a celeron server with 512MB handle simultaneous downloads and how many users can it support simultaneously? The server will be serving as a pure download, no database, no php, no cgi, no nothing. And what is the highest mbps this server could potentially reach?
View 6 Replies
View Related
Apr 17, 2008
I've ordered 1gbit/s port with one my dedicated servers. But I am still unhappy with the speed of download.
I have 2 mbit DSL connection at home and I can download files with 90 kb/s from the server. I also see the same speed on a 100mbit port server. But I can download files from RapidShare with 210 kb/s..
What do you recommend me to do make faster downloads from server-side?
View 12 Replies
View Related
Mar 18, 2009
I have a file that will probably be a few megabytes in size that will be downloaded 100's of thousands if not millions of times.
Where would be a good place to store this file?
Are there any big file hosting companies out there you've used or can at least recommend for this sort of thing?
View 5 Replies
View Related
Oct 29, 2009
I have a problem with some mp4 videos and the downloads made from cellphones.
I have a plain LAMP server (centos 5, apache 2, php 5), the customers download the videos from a web, mobile section, and play on their cellphones.
The strange thing is that when they opened the video to play it on the cellphone, the video shows itself as a binary, although the extension remains mp4.
Tried moving the same video to another server, and it was played ok without any changes.. so, tested another server and after making this changes, it was able to reproduce the mp4 format:
I changed the Default mime.types from text/plain to application/octet-stream
TypesConfig / etc / mime.types
# DefaultType is the default MIME type the server will use for a document
# If it can not otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text / plain" isnte
# A good value. If most of your content is binary, such as applications
# Or images, you may want to use "application / octet-stream" instead to
# Keep browsers from trying to display binary files as though they are
# Text.
#
DefaultType application / octet-stream
When the videos out in binary, with a lot of strange characters, leaving just this: application / octet-stream
I see in /etc/mime.types and there is support for many formats, including. Mp4
However, on the original first server even if I change the above code, I can not reproduce mp4.
On any laptop or pc from the three servers I can reproduce the videos, the problem it’s just on one server playing from cellphones.
View 2 Replies
View Related
Jan 8, 2008
I just received a fairly scary WHMCS notice, you can view the details here:
<<please don't paste the file names, there are accounts that may have these on them>>
What are your thoughts on the entire situation? Personally, I'm a tad fearful (luckily, I hadn't upgraded to the next version yet as I was letting the other users play beta-testers) given the fact that there wasn't any versioning / modification 'notification' system in place on their end.
I'm fearing further updates. In essence, my concern is that the WHMCS development team isn't entirely certain how they were backdoored or to what scale they were backdoored.
Are their own billing systems & servers hosted in the same environment, were our billing details also released? etc. I want to know the scale of the attack.
View 14 Replies
View Related
Jul 22, 2007
I recently updated to Cpanel 11, which has resulted in a very interesting error.
All pages (html, PHP, etc) do not display, but rather show a download dialog box. What's wrong?
something is wrong with httpd config?
View 5 Replies
View Related
Aug 30, 2007
I have a little project for a website that contains some of Downloadable files
and Media Files!
In my calculation..., I may use about 50 GB storage
and if the number of visiors is as what im expected i'll need 1 TB bandwith or some less!
==
let's talk about the hosting part here
i know that there are some companies that over more than 300 gb storage and more that 3 TB of traffic!
but i don't think they are going to work with my project so... i searched for a vps to start my project ..., and im thinking in dedicated server in the future..,so let's not talk about the future right now!
I want to talk about the ability of vps for downloads hosting!
the vps I've found is this one:
Disk Space : 60,000 MB (60 GB)
Number of Domains : Unlimited Domains
CPU Limit : Equal Share
Guranteed Memory : 512 MB
Burstable Memory : 2048 MB
Monthly Bandwidth : 2,000 GB
Included Control Panel : cPanel / WHM
View 6 Replies
View Related
Apr 4, 2009
I have a problem in that I sell somewhat large download files, and Hostmonster told me their servers don't support 'resume'.
So if my customer has a power failure, etc., during the download, he'll have to start all over again.
So it looks like I'm going to have to move my download files to a different server.
Can anyone recommend a good host that will store my digital downloads and, that, most importantly, support 'resume'.
View 7 Replies
View Related
Mar 9, 2008
I thought some might find this short review useful. I recently found my website - vladstudio.com - pushing shared hosting limits fast (powweb.com at that time). After long days of (unsuccessful) searching for ideal hosting (fast, with lots of traffic, managed, and of course cheap :-) ), I got good idea from my wife and splitted my website into 2 pieces hosted separately.
For domain, PHP and MySQL, I've been using MediaLayer Application (shared) hosting. I might already mention it here before - I'm extremely happy with them, once my site hit digg.com frontpage and I got 500000 visitors in a day, and hosting did not go down! Right now, it serves about 25000 visits (500000 hits) a day, every hit being dynamic PHP page with several MySQL queries.
For hosting images and downloadable files, I use PacificRack dedicated server (most basic one, but with 2000 Gb/m traffic included). I am very bad at managing servers, but default configuration and my modest knowledge of Linux was enough - it is only used to store files that visitors download from vladstudio.com.
So, if your site is growing out of shared hosting too, consider 2 separate hosting accounts for application and files - it works very well for me. And once again, big thanks to MediaLayer and PacificRack.
View 9 Replies
View Related
Dec 4, 2007
I've tried Lighttpd and Apache. Server is QuadCore 1 cpu.
Either one when I have one long curl download occurring in Firefox, and open up another window to connect to the site it waits until the curl process completes.
In Lighttpd I have php 5.2.5 fastcgi and xcache.
There is no errors. It simply just waits until the process is completed and 1 second later the second request (2nd browser) starts.
Code:
fastcgi.server = ( ".php" =>
( "localhost" =>
(
"socket" => "/tmp/php-fastcgi.socket",
"bin-path" => "/usr/local/php5/bin/php-cgi",
"max-procs" => 1,
"bin-environment" => (
"PHP_FCGI_CHILDREN" => "16",
"PHP_FCGI_MAX_REQUESTS" => "10000"
)
)
)
)
View 5 Replies
View Related
Jun 5, 2013
Server version: Apache/2.2.22 (Unix)
Server built: Dec 9 2012 18:57:18
OS/X 10.8.4
I am trying to run a shell program to generate a web page. When I enter it as test.cgi, it does exactly what I expect. When I enter it as test.sh
View 2 Replies
View Related
Dec 25, 2014
I need to know how to configure awstats (Plesk's webstat) not to show report of downloads from a certain directory on my website.
(Plesk version 12.0.18)
View 1 Replies
View Related
Aug 6, 2008
I just try install
but as title I have this error
./chkrootkit.sh: line 2: cd: /downloads/chkrootkit-0.48/: No such file or directory
./chkrootkit.sh: line 3: ./chkrootkit: No such file or directory
I’m edite
pico /etc/cron.daily/chkrootkit.sh
and set it to
#!/bin/bash
cd /downloads/chkrootkit-0.48/
./chkrootkit | mail -s "Daily chkrootkit from Servername" ****@****.com
then I try make test by
cd /etc/cron.daily/
./chkrootkit.sh
and it give me this error
./chkrootkit.sh: line 2: cd: /downloads/chkrootkit-0.48/: No such file or directory .
./chkrootkit.sh: line 3: ./chkrootkit: No such file or directory
View 8 Replies
View Related
Apr 15, 2009
At 15.00 PM (+1 hours here) my isp rebooted the hardware node. After the reboot there were some issues, they think it is possibly a DDoS Attack. They said the load on the host node was in the hunderds and my VPS was stopped because of the reboot and when I started it, HyperVM first told me it was not possible and after a few tries it started finally.
But the load was very high, and it still is. How can I check what the problem is that creates the high load?
View 8 Replies
View Related
Nov 29, 2007
Im getting very poor ftp speeds from my server, can someone test the speed and report it back, link below:-
[url]
View 11 Replies
View Related
Jun 20, 2007
I did nothing but my whole server got slower.
Especially the sshd and mc.
I solve the sshd problem cos I edited the conf file with UseDNS no so it faster right now but I couldnt do anything with mc.
I have to wait about 15 seconds to load it.
Any suggestion?
or any ideal why my server become slower?
System: Debian 4.0
kernel: grsec 2.6.19-1
Till today morning its okey.
Oh, yes, I run tiger and got the following message in log:
09:50> Beginning security report for atdn.us (GNU/Linux Linux 2.6.19.1-grsec).
# Performing check of passwd files...
# Checking entries from /etc/passwd.
--WARN-- [pass014w] Login (firebird) is disabled, but has a valid shell.
--WARN-- [pass016w] User oident has / as home directory
--WARN-- [pass015w] Login ID sshd does not have a valid shell
(/usr/sbin/nologin).
--WARN-- [pass015w] Login ID sync does not have a valid shell (/bin/sync).
# Performing check of PATH components...
--WARN-- [path009w] /etc/csh.login does not setenv an initial setting for
PATH.
# Only checking user 'root'
I modificated this to the correct one (I mean I try to solve this warnings) but when I noticed that my machine becmome slower, I recover everything.
View 0 Replies
View Related
Jul 16, 2009
I have an ASP.Net + SQL Server 2008 Express website I was hosting with DiscountASP.net. Their service seems pretty solid, and I didn't have any issues hosting with them. Customer support was quick and knowledgeable.
However, I had noticed for quite some time that the website seemed pretty slow. Please note that the website isn't live yet, so it was only me and a colleague who were accessing it. I was accessing the website from Dubai, UAE and he from Doha, Qatar. Therefore traffic/load definitely wasn't the problem.
We tried an instance of the website on a VPS (the DB was still running on DASP), and it was blazing fast! The difference in speed was quite significant and sustained. What could the reason for this be? Is it because we can't expect good speeds from shared hosting? Or should I report this issue to DASP?
I would be paying around 5x of what I'm paying right now ($100 instead of $20) if I switched to a VPS, but if there are definite advantages, I would be willing to do so. I don't expect large volumes of traffic on the website for quite a while.
View 14 Replies
View Related
May 22, 2009
I have a problem with my company's web hosting solution: occasionally we go through periods where we cannot seem to access our webpages very quickly. In different browsers (IE, Firefox) it takes literally minutes to load a single page. Most of the time the pages load very quickly from inside our office or outside.
Our self-hosting configuration is:
Windows XP Pro. w/ SP3
Apache 2.2.11 with PHP5.2.9-2
Norton Internet Security
Our internet connection is 10Mbps down / 900 kbps up cable behind a DLink router with port 80 forwarded over to the web server. Each page of our site is relatively small in size.
The same computer server as a mail server for about 10 email addresses.
When we encounter this problem, restarting the Apache service never seems to help, but restarting the computer does seem to help. XP was put on the computer with the latest updates about 3 weeks ago, so I am not concerned about spyware, particularly since this computer is only used as a server.
Does anyone have any troubleshooting steps to determine what the problem is? We don't have hundreds of visitors at a time in traffic as far as I am aware.
View 6 Replies
View Related
Jan 6, 2009
After my bad experiences with the other provider, I decided to go with GeekStorage.com for my hosting needs. I found plenty of positive reviews for them but so far, it doesn't look good :-/
The support was fast enough, but not really helpfull.
My basic problems, so far, are:
1. The VPS is _really_ slow. Simple operations like listing (ls) the contents of directories with 4-5 files takes around 1~1.5seconds. Editing /etc/vim/vimrc with vim takes around 3 seconds (to open, I mean).
2. While trying to install phpmyadmin from the default ubuntu repository took me almost 10 minutes, from downloading to installing the packages. Something my old Dual P3 (yes, pentium 3) did in less than 2 minutes. Accessing the phpmyadmin page (with a web browser) took around 3 seconds, and no, I don't mean loading the database scheme and stuff, just the login screen. It just stood there for 3 seconds, then instant load. No, it wasn't a DNS problem. My browser was just hanging at "Waiting..."
3. Bandwidth is _really_ low. Tried downloading different files located all around the world and I never seen more than 300k/s, max. Sometimes it drops to a painfull 150k/s and just stays there.
4. Timeouts. First night they got my VPS up I had small downtime periods. I was trying to edit the DNS files and I had like 20 disconnects in 1 hour. The connection was working for 2 minutes, then *poof* dropped for another 2 minutes.
5. The virtualization. I can't install simple software as pureftpd. All I get is "Jan 4 20:38:21 vps pure-ftpd: (?@?) [ERROR] Unable to switch capabilities : Operation not permitted". Tried different workarounds (trying to avoid recompilation with --without-capabilities) but nothing worked.
As answers, all I got so far is:
- for the connection problem:
"Could you please provide the results of a traceroute when this problem is occurring? We will forward it to the DC and see if they can determine any network issues. Thank you, and apologies for the trouble."
Got the answer 1 hour after I asked them if there's something wrong, but it was too late... the problems were gone, for the moment.
- the slow response from the vps:
"2-3 seconds is understandable during peak hours, however we have not seen this issue come up on node3 since the server was rebooted recently. If the issues arise again
please let us know, we will check on the cause."
I *almost* understand about the peak hours, but it's not normal. I remember this was an issue with *shared* hosting. This was one of the reasons I got a VPS in the first place.
Basically they're telling me that during peak hours my customers will have to wait 3 seconds for my websites to load. You know what the average user does after waiting that many seconds for a page to load? Closes the browser or types another address.
I have the VPS512 plan (the $55 one + $3 safetyweb protection) + extra 50% bandwidth and disk space. My VPS is located on NODE3.
Anyone else experiencing the same issues (maybe on another node?) I'm still hoping for this issues to go away, maybe it's something temporary, but if this happens for the whole week, I'll definatelly ask for money back (they have a 60day return policy).
View 14 Replies
View Related
Jul 28, 2009
My cPanel/WHM VPS is running slugesh/slow and loading time is affected, for cPanel/WHM and HTTP mainly PHP files.
VPS Spec:
CPU: 1 GHz * 4 cores
RAM: 832MB - Spare Ram 300MB+
Space: 35GB - Left 27GB
Load: Various but normally below 1.00
Is it in the UK, I am in the UK ping and trace route looks fine
View 4 Replies
View Related
