My business is on the other side of the world and peak time starts at midnight in America time. I am planning to buy 100Mbps shared servers with FDCServers. I am wondering if the time of the day makes a huge difference for a shared 100Mbps line.
View 1 RepliesHere is the screen shot of the "mtr" running from two servers:
Server1: Fibre optic line from Tata Communication
Server2: DSL line from Tata Communications
Source servers are located in Kolkata India
Target server is located in Fremont California.
The fiber optic cable has:
A. Higher ping time and
B. Higher standard deviation
compared to the DSl line.
Our web site has been hacked many time over the last few months. The hacker only puts links to other site in our html code. We changed the FTP password many time but we are still finding malicious code in our main index page and other pages on the site.
We can figure how and from where they are coming in and how prevent further hacks.
I'm going to be rolling out a php/mysql driven site soon and I'm pretty much resigned to the fact that the mysql performance dreamhost has given me isn't going to cut it, its probably too oversold. Simple one table one column selects can take 30 seconds or time out depending on how badly the server is being hammered. HTTP requests are usually snappy, but the mysql performance is bogus.
What is a good host for me to launch this site with? Storage wouldn't need to be too terribly high, at least initially. I'm tempted by MediaTemple's slick marketing, but I've seen on here that some people have had poor sql performance (contrary to what some personal friends have experienced, so I'm torn). I was reading about downtownhost on here, but their load times seemed slow when I hit a couple domains listed on here that are hosted by them.
This host needs to be located in the US. Honestly, I like dreamhost and their panel, save for the sql sluggishness I'm getting.
im running a few blogs on a shared hosting account (steadfast) and i noticed the 18 sql queries being generated by a fresh install of wordpress 2.7 are taking 0.246 seconds to execute.
<!-- 18 queries. 0.246 seconds. -->
considering this is a shared hosting server with over 800+ more domains on it, is the performance better or worse when compared to other shared hosting providers ?
archim3des
i have 1 decent server hosted by netriver, managed by PSM, for the past 3 weeks, my server down every night at the same time, during the day the load was really low ( below 1 ) and suddenly just before 3 oclock in the morning it goes up upto 2000 and the system crash, and need to reboot, then it will back to normal again, PSM doesnt know what causing it and just advised me to install PRM ( which i tried before and really give me headache ), what you guys think causing it ?
View 6 Replies View RelatedI'm having a problem with Apache restarting every night - in the error logs I get the following message:
[Tue Jul 31 21:39:02 2007] [notice] caught SIGTERM, shutting down
[Tue Jul 31 21:39:03 2007] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Tue Jul 31 21:39:03 2007] [notice] Digest: generating secret for digest authentication ...
[Tue Jul 31 21:39:03 2007] [notice] Digest: done
[Tue Jul 31 21:39:03 2007] [notice] LDAP: Built with OpenLDAP LDAP SDK
[Tue Jul 31 21:39:03 2007] [notice] LDAP: SSL support unavailable
[Tue Jul 31 21:39:03 2007] [notice] Apache/2.0.52 (CentOS) configured -- resuming normal operations
I know that this wouldn't normally be a problem but on this server I run Cast Control which uses PHP to start shoutcast servers - when Apache restarts it turns off all of the Shoutcast servers. Is there any way to stop Apache from restarting all the time?
Alternatively, is there a way to run processes under a different user other than apache so that they don't go down with it?
I have server with acompany, and after tracing this server I found it is hosted with softlayer.
I feel that Internet connection at this time is getting very slower than morning in my time, I tested this coz i used to move big data from server to server, and i found if i moved data at night it is very slower than in the morning... approximately if a 1GB requires 5 min in the morning it will take 15 at night...
if a provider provides me a 1Mbps AIMS dedicated line for my dedicated server, is it possible for him to make it burstable to 1.5Mbps? i thought when i get a dedicated line i would be able to get max 1Mbps only? How is it possible that it can be burstable? Does that mean its not dedicated, instead shared?
View 4 Replies View RelatedI currently have a dialup isp. We use a couple of wholesale dialup service providers to provide service to our users across the nation. I would like to provide my own dialup services across the nation if the cost is justible.
Here is what I want to do:
1. Buy a remote access server (RAS) with hundreds of modems in it. The RAS will have multiple T1/PRI/T3 interface cards in it depending on which one I get.
2.Place the RAS in a Houston, TX datacenter.
3. Get voice services from a carrier that can deliever multiple T1/PRI lines (or a T3). I would want a local DID or phone number in hundredes of locations across the nation. When a number is called, it would be rerouted back to the Houston, TX PRI/T1/T3 connections WITHOUT ANY LONG DISTANCE CHARGES.
Is this possible without paying an arm and a leg for it? Can anyone give me any recommendations besides stay with a wholesale dialup provider.
Has anyone noticed how there is more and more hosts which offers 10tb bandwith on dedicated server lines?Looks like soon that will become standard on all hosting datacenters.
View 14 Replies View RelatedCould someone please help me with:
1.) the command line to hard power off a VM that has frozen up
2.) the command line to boot a VM linking to its config file
I have seen various hosts runnig very cheap hosting on DSL lines, are they any good?
View 14 Replies View RelatedEvery email which gets automatically sent out from my server begins with:
Reply-To: noreply@MYDOMAIN.com
X-Mailer: PHP/4.4.7
Message-Id: <20080319210750.564111CEC004@mx.MYDOMAIN.com>
Date: Wed, 19 Mar 2008 22:07:50 +0100 (CET)
Dear DOMAIN.com Member,
This is not in our PHP code or anything, and I can't seem to remove it, its just a tad annoying. How do I remove it?
My linux host requires a few lines of codes in my .htaccess file to properly run my site.
However, these few lines of codes are not supported by my local Wamp on Win7.
Is there a way to add a "If Wamp Then not run these lines" in my htaccess file
So that I don't have to manually change the .htaccess file before upload/downloading the site between the two systems?
I am using dreamhost host 3 of my web sites and 1 blog. Dreamhost is great, offers alot space and bandwidth.
but I think they are oversellling their space, sometimes it gets really slow. (overselling ? ok, I dont really know, but sometimes its really slow, and most my asian readers said need to refresh to load the page. I am wondering if theres a way to check if they are overselling or not.)
I am thinking about buying vps, even tho, I still got 5 month left with dreamhost.
I found 2 vps companies are highly recommanded on this forum, JaguarPC and LiquidWeb.
theres already a post compared both companies in terms of price and service. I say I will pick JagarPc, cuz, its basic plan just 20 USD, and htey got promotion now, its even cheaper. and basic Liquidweb vps plan is 60 bucks.
I am wondering why Jagarpc is so cheap , are they overselling? how can we check if they are overselling.
I found a few posts saying how good jaguarPc is. and they are not overselling, but those members just signed up this month, and only have 1-3 posts. I cannot really trust those new members.
Can someone share their experience with JaguarPC? compare JaguarPc performance and liquidweb performance. antoher question is switch from dreamhost to JaguarPC basic vPS plan, will performance gets better?
last question: VPS account allows 3 IP, 3ip = 3 domains? if not, how many domains can I have?
login as: root
root@20*.17*.3**.1**'s password:
Last login: Fri Feb 22 15:21:26 2008 from 20*.5*.4*.2*
[root@vian ~]# yum install php-gd
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
extras 100% |=========================| 1.1 kB 00:00
updates 100% |=========================| 951 B 00:00
base 100% |=========================| 1.1 kB 00:00
addons 100% |=========================| 951 B 00:00
Reading repository metadata in from local files
Excluding Packages in global exclude list
Finished
Parsing package install arguments
Nothing to do
[root@vian ~]#
Does that mean I have installed GD? I am new to this dedi thingy.
I asked my host to reload/rebuild my dedicated server as I wanted to clear my entire server so that I can used it for a brand new project but I was told that it would cost me $75 per server.
Am I able to engage a freelancer to do it rather than getting my hosting provider? I would also need to change the server hostname from www1.xxx.com to www1.yyy.com and the name server to be changed to ns1.yyy.com and ns2.yyy.com instead of ns1/2.xxx.com. In short, I do not want yyy.com to be traced back to xxx.com at all. I do not want a traceroute, cpanel or other means to link the two site together.
About 4 days back i ordered and got a Xeon dedicated box from Softlayer
BUT i am stuck adding one domain. First i tried making a new account for this domain through WHM but problem was not solved, so today i parked this domain to a domain's cPanel account but after that also problem was not solved
So, let me first explain you whole problem. Suppose my domain is my-domain.com
This domain my-domain.com was added to shared hosting account at ace-host.net. But after purchasing dedicated server, i shifted whole site data to new server and changed the nameservers of my-domain.com with new ones and atlast i removed this domain from my Ace-host.net account.
Then i waited for about 2days to domain to propagate with new server's namesevers. But when nothing happened (i checked the domain whois record, they were showing my new server's nameservers), atlast i contacted Softlayer regarding this and after sometime they replied We have given the correct server alias for your domain my-domain.com in apache configuration and it was working fine that monent.
But after sometime i checked that my-domain.com is loading fine but it is taking whole data (including database and templates) from my OLD HOST ... Ace-host.net!
As i have already mentioned that i have already deleted my-domain.com from Acehost account and also updated the my-domain.com's nameservers with new dedicated server's.
And i checked many times WHOIS records from different websites at that moment. All were showing nameserver records of my new server.
I now contacted PSM and they after sometime replied that its working now as they just had to restart dns server.
BUT NOW , today again samething is happening! (on the 4th day)
so, i terminated my-domain.com's account from my server's WHM. and then parked in other domain cPanel account on same (Softlayer) server but still problem is still there!!
Domain is registered at Namecheap.com
NOTE: I am not saying anything against PSM or Softlayer and their support staff. They are both THE BEST in the market! and they have helped me a lot manytimes.
I also have two more domains on this new server and both are working fine from very first day. They are registered with local registrar not with namecheap.
i've purchased a dedicated box with Plesk webhosting, but i can't get the email forwarding services to work
The domain is registered with Domainsite, set in plesk to forward admin@domain.com to my gmail... and it doesn't work no matter what i try...
First settings i tried( I use domainsite's nameservers and set the dns in there, if you know a better/other way, please reply) blanked out the last 2 chars of the ip just in case
Code:
Record Type Record Host Record Answer TTL Priority (MX only) Create Date
A *.domain.com 84.244.-.- (delete) 300 2007-11-10 07:43:03
A domain.com 84.244.-.- (delete) 300 2007-11-10
well that didn't work, so i figured i needed a MX record
I added:
Code:
MX domain.com 84.244.-.- (delete) 300 10
but it still didn't work( i did wait a few days after each change)
Then i tried the domainforwarder from Domainsite itself
which added 2 records:
Code:
MX domain.com mx0.domainsite.com (delete) 300 10 2007-12-01 12:17:37
TXT domain.com v=spf1 a mx ~all (delete) 300 2007-12-01 12:17:37
but it still doesn't work
i'm also getting mails bounced back with the line: "Reverse DNS lookup for your IP address is failing."
what changes need to make?
Am curious about Wildwest Dedicated Servers and VPS Servers.
I'd like to know for those of you - your thoughts either way on your experiences Good, bad, what you learned while being there.
1. What you like about Wildwest Servers Dedi or VPS
2. What you don't like about Wildwest Servers Dedi or VPS
And anything else you'd like to throw in.
I had shortlisted a few, although there may be more choices..
SoftLayer have lesser discount, but they have an excellent DC, hardware & more~
Gigenet have up to 30% discount and 15% at least, which is a plus, but I'm not sure about other stuffs, although they are also pretty reputable around..
LimeStoneNetworks have very little discount, and their servers are cheap, but their specs are pretty much *fixed*, and they do not seem to offer as much as the above..
HandyNetworks have cheap servers too, but they are not as competitive with the above 3, in the sense that they are not much interested to join the competition, remaining on their own track completely..
HiVelocity - No information, although their requirement is pretty simple..
Take2Hosting, although they have really cheap servers, their datacenter isn't as advanced as the others, and... Cogent... IMO more suitable for personal use, small sites etc.
IMO I will prefer SoftLayer, but their servers are quite expensive, so even if I get 4 dummy servers, which cost $119(their cheapest server) and multiple by 4 is $476, and get a server used to sell hosting, it will not be cheap.. However, on the other end, Gigenet has cheaper servers(especially their specials, really better than SL), although their entry server is $154, which I suppose everything will balance out, I just can't think of anything they can be better than SL, in terms of network, support, server administration(I heard and tried SoftLayer's portal to manage the server, it was excellent!) etc.
I will actually love to resell Gigenet servers, since it is a lot cheaper(in terms of discount), and their prices are roughly the same(except SL RAM is more expensive)..
ASPnix offers SmarterBundle for FREE with any Dedicated Server Accounts.
Purchase ASPnix Dedicated server TODAY and get SmarterBundle Professional ($747 in value) at no additional cost!
So what do you think of their offer?
i have recently get this server , we moved to this server in the same datacenter
Linux OS:centos 5.4
Kernel Version(uname -r) 2.6.28.7
Hardware Information:icore7 920 + 12gb ram
Software Version;csf firewall, ossec Intrusion Detection System, rvsitebuilder
Control Panel(if any)whm+ fantastico
yesterday the dc tech logged-in by ssh (root) cause we couldn't connect to the ftp box we keep our backup's (the new box couldnt connect to the ftp got time out)
They fixed it.
Today i got a time out and after 2 reset and restaring of services the server was back again.Then i got this messages and it still coming (3 hours now i get 1 similar message per 5 second )
Code:
Nov 4 12:31:20 gandalf kernel: martian source 217.20.117.1 from 127.0.0.239, on dev eth0
Nov 4 12:31:20 gandalf kernel: ll header: ff:ff:ff:ff:ff:ff:00:1a:4b:3a:7e:23:08:06
Nov 4 12:31:21 gandalf kernel: martian source 217.20.117.1 from 127.0.0.244, on dev eth0
Nov 4 12:31:21 gandalf kernel: ll header: ff:ff:ff:ff:ff:ff:00:1a:4b:3a:7e:23:08:06
Nov 4 12:31:22 gandalf kernel: martian source 217.20.117.1 from 127.0.0.252, on dev eth0
Nov 4 12:31:22 gandalf kernel: ll header: ff:ff:ff:ff:ff:ff:00:18:71:80:07:86:08:06
Nov 4 12:31:22 gandalf kernel: martian source 217.20.117.1 from 127.0.0.244, on dev eth0
Nov 4 12:31:22 gandalf kernel: ll header: ff:ff:ff:ff:ff:ff:00:1a:4b:3a:7e:23:08:06
Also the firewall stopped the port scanning from a server within the same dc.
I checked it on google and the explanation's varies but most say that is a problem of the router/switch or similar.
I have non-english languages being showed as ? on different servers / vps.
I have tried "yum install french support" which installed but the problem persist.
On one of the VPS i switched to lighttp and the problem disappears.
I guess it has to do with Apache?
I would like share my experience with CreativeVPS/CreativeRACK, I've been around this forum for a while now but rarely post and I never shared my bad experiences but sometimes it is necessary to do so that others would know and maybe improve the service people get. Forgive me if I misspell and the bad grammar English is not my first language.
I currently have a a VPS with Servint which is Great
but lately I felt it wasn't enough and was thinking moving up to a small dedi and yesterday (March 31 2009) I found "[CreativeRACK] Closeouts! DUAL CORE / 2GB RAM / 250GB SATA - $59 (Managed!)" under "Dedicated Hosting Offers"
the offer looked good and Joseph r00ter been around the forum for a while now and has a nice posts counts so I decided to go for it so yesterday March 31 2009 I talked to Joseph on the messenger, he was nice and near midnight(thumbs up to Joseph for working late) I ordered the "last" Intel Pentium D 925 for $59.95+$20 cpanel, he emailed me the invoice I paid it right a way.
I woke up in the morning <--thats how I actually look in the mornings , and saw that Servint had upgraded all the packages, which changed things to me and I decided not to move to a dedi and stay some more with servint. so I opened a high priority ticket to cancel the order, before my morning coffee . the response I got was "Payments made to CreativeVPS are non-refundable as it says in our Terms of Service, which you were bound to when you placed the order..." later that day I messeged Joseph but he said the same thing and that they already bought the hardware *reminder* it was closeout clearance sale server* and that I'm obligated to their TOS that stated that there no refunds.
he quoted "Q: Do you have a moneyback guarantee?
A: Due to the amount of fraud orders we get, we do not offer a moneyback guarantee."
from the offer page.
the worst thing in my opinion is that when I stated that there is no visible link to the TOS on their "Legal Information" page which contained AUP and SLA which did not say anything about refunds Joseph just changed the page.
I can post the entire conversation if needed.
Unfortunately I had to open a dispute with Paypal, I hate doing it and before this incident I only charged-back only once (when RegisterFly charged my credit card and closed their business)
aside the legal part there is a right way to run a business and handle clients, this is not it. you need to be fair and honest. and not just profitable.
I shut down iptables on my dedi to try to install Poweradmin but, when the install did not work (probably because DirectAdmin was controlling files and processes I needed for the package) I attempted to restart iptables by running "/etc/init.d/iptables restart" and "service iptables start". It didn't restart. I restarted the webserver running "/etc/init.d/httpd restart". I even rebooted the dedi. Still, no iptables.
View 11 Replies View RelatedIs there anything like that?
A reseller wants to be alone, server resources, dedicated IP, etc. while doesn't have Sys Admin nor Server management knowledge..
Is there a dedicated/VPS that is fully managed from the Hardware, OS, up to System Admin level, leaving the reseller to just use his reseller account on it?
What is the name of such package? under what name should he look for it? how different is it from Managed dedicated/ VPS?
I was wondering if it's feasible to run a VPS/Dedi server entirely on lightweight alternatives. I.e:
nginx/lighty/litespeed instead of apache
php/fastcgi or php-litespeed instead of mod_php
tinydns instead of bind
and so on...
Is it a viable solution? Is anyone running their hosts on these alt servers? What is your experience?
I'm specially interested in nginx (lighty has been accused of leaking memory, and litespeed std is feature-limited). What's your verdict on running it as a stand-alone server for php-fastcgi and static contents?
i am confused which one is better VPS or Dedi ? my budget is very low under $25-20 / Month , I saw some dedi offers for $30/month from prontoserver i think is that Good?
or Go with a VPS? i need 60GB and 400GB of bw so what is the best thing?
I have been following there posts in the offers section of wht for a few weeks now, I've contacted RN-DAVID a few times about his offers and the response has always been fast and the service sounds good, however i would like to know what everyone else thinks.
I'm looking to order two servers from them with the following specs:
Server 1:
AMD Sempron 3000+
2GB DDR2 RAM
1X 120GB SATA II HDD
1X 160GB SATA II HDD
2 IP Addresses
Windows Server 2003 Std
3TB CAP on a 100Mbps Line
Priced @ £40.95 PM with £20.00 Setup for RAM and Second HDD
This server will just be for my personal use really, I'm planning on backing up some of my personal data to it, photos, documents etc... I'll be using it via remote desktop mainly so doesn't need to be top spec.
The second server is going to be an additional Cpanel Web Server With the following spec's
Intel Core 2 Quad 6600
4GB DDR II RAM
2X 500GB SATA II HDD'S (RAID)
8 IP Addresses
CentOS
CPanel
3TB on 100Mbps Line
Cost £69.95PM + £120 For RAM, HDD & Raid Card Upgrades
Now when it comes to value for money both servers seem fantastic to me, but what I would like to know is does anyone else use them? what are your experiences with them? whats there support like? etc...