For some reason, every time I setup the SSL cert on my Windows box, I receive a error 400 when I try to visit the site. When I take the SSL cert out then the site loads again. Anyone know what the problem is here?
View 1 RepliesI'm trying to set up a SMTP server on my local machine.. can i do this with a windows OS using apcahe?
View 3 Replies View RelatedI run mdaemon mail server and IIS6. Recently the machine started acting real freaking slow and I noticed that mdaemon was taking up 25-50% cpu almost all the time. When browsing through my computer/explorer, it takes a number of seconds (about 5-10) to show all the folders as you drill down any directory tree. Also, when you right click on any folder/set of folders/set of files/individual file, it takes a good 5 seconds for the right click menu to show up.
The entire machine is just going butt slow for some reason and I'm at a total loss as to why. Here are a few bits of info regarding how the machine responds to things. If I reboot the machine, its totally fine for a short time... mail takes up the usual 1-5% cpu and all folder browsing is normal and speedy. When the machine does become slow as crap, if I turn off the mail server, the machine still runs super slow, nothing changes really. The folder browsing takes forever still and so does right clicking anything. I've done a full virus scan, and nothing. I'm not sure what else to do, but there are no processes running that are taking up a lot of cpu or ram that might be programs causing problems. Bandwidth is not being eaten up either, its on a T1 and on average does about 5-10GB of total IN/OUT bandwidth and that has not changed. I'm not stupid when it comes to computers, but I'm at a total loss as to what could be causing this.
We have a domain portal controller for windows. All the machines in the n/w are connected to it. So, when ever an user enters the user name and password it gets authenticated from the domain portal controller. So, my login can be accessed anywhere in the netowrk.
Example : my login is sabarishks which can be used in any machine under this domain controller.
But, if the system is installed with both linux and windows only windows username will be authenticated using the domain controller. Whereas, the linux users will work with in the system using /etc/shadow file. Hope, I am clear so far.
The requirement is same as above. The authentication mechanism for linux should work as windows. When ever an user is entered with a username and passwd, it should get authenticated from domain controller.
I mean, the user created in a windows machine should be used for linux login also. More importantly, It should work in all systems.
Which technology can be used to do this? Samba,Ldap, NFs or what?
I changed Machine Name but myLittleAdmin Object Path shows my old machine name.How can update this name?
View 3 Replies View RelatedApache seems to have a maximum client download speed of 5Mb/s. That too after I use these commands:
# Improve file transfer speeds on Windows Machines
EnableSendfile Off
EnableMMAP Off
Which without, the speeds are even slower!
I know for sure the server I am running Apache on can go to much higher speeds (2MB/s to even 12MB/s) because I tested it via FTP.
I would like to create VMM template with installed plesk panel 12.0.18
But after I executed sysprep plesk panel didn't work.
All services, application pool work, but when I try to connect https://localhost:8443 I get an error "The page can't be displayed"...
Am using Windows 2003 server with IIS6.0 and SMTP.I tried to send mail using ASP.net C# code through SMTP service.But my mails are getting queued in C:InetpubmailrootQueue.
What could be the problem??I've done many trouble shooting steps but no luck.I changed the Relay settings.Since I am in a LAN connection, i've tested the relay setting using both the 'localhost'and 'MyDomainIP'but everything in vain.
way to automatically export/backup all the certificates on our Windows Server 2003 boxes every night (through a command line scheduled task).
I can do it manually via Certificates MMC (by selecting all certs and exporting them as an SST file). But I would prefer this process to be automated.
I am able to do a VPN connection to the Windows XP VPN server.
But however i cannot access the remote VPN computers.
I have a dedicated server running windows web edition. What is the easiest way to set up a VPN server on this machine so that I can log in to it from my home connection and route all my traffic through my server.
I've found a few guides for setting this up on linux boxes, but not with windows.
i had a problem with setting up DNS in windows VPS server in plesk.
View 0 Replies View RelatedI am having a problem setting mails on Thunderbird.i did exactly as you said in the documentation but still receive an error for sending an email (incoming email is good).i used full email address as username.domainname.tld as Incoming/Outgoing server address.
port 25 and 143 but still seem that i can't send emails.via web-mail i can , but via Thunderbird on my local PC i can't.I have a dedicated windows server with plesk 11.0.9
I have upgrade my mysql plesk installation from 5.1 to 5.6 and have troubles in setting utf8mb4 charset for server and databases. Special characters still display badly in my websites. I'm running Windows Server 2012 R2 and plsk 12.Â
View 1 Replies View RelatedCode:
Error: Unable to reconfigure web server. websrvmng failed: Site MailEnable WebMail does not exist at IIS7WebSites::get() In IIS7NativeProvider module Exception type: System.Exception at IIS7WebSites.get(IIS7WebSites* , auto_ptr* , Int64 id, basic_string,std::allocator >* idnName)
Windows Server 2012
Plesk 11.0.9 Update #62
Note: Recently migrated from Plesk 9.2
Trying to set Default Site for a Dedicated IP Address.
I go to Subscription, then to domain > Change Hosting Settings, select dedicated IP address and OK, works fine. Site goes to Default Plesk Page.
Go to Tools & Settings, IP Addresses > Select the dedicated IP address I set above. Change Default Site to site above. Click Ok.
I get the error message above and nothing changes.
I looked on my IIS Server and MailEnable's Webmail is installed under the Default Website.
I have another Dedicated IP on this server and it has a default site on it working properly, but it was set up on the old site and it was configured as part of the Migration using Migration Manager.
I tried deleting the IP address and adding it back in. That didn't change anything. I also tried running: "%plesk_bin%websrvmng.exe" –reconfigure-webmail since that came up under someone else's issue when searching the web and that .exe is what's throwing the error.
I'm wondering about colocation but weary of sending a server that's valued at $2k+ to a facility I've never used before.
What do you do to "test" out a colo facility? Do you send them a less expensive machine to test them out?
Do you buy insurance for the system you're colocating?
Or do you just send them the server and hope all works out?
I have server for testing UBC an SLM memory management (Virtuozzo 4). I use SLM memory limits and setup 2 VPS's with my hosting plan (1024MB guaranteed and 4096 MB dynamic).
Host machine have 8 GB of RAM. My problem is, that host machine has have 100 MB of memory free when these two VPS's are running.
Where is all memory?
I was using apache on my old xp machine but recently got a new computer, vista 64 bit which comes with IIS server.
I am familiar with html/css and starting to learn php, asp etc. Am I correct in assuming that it would be good to setup both Apache and IIS on my machine so that I can test database driven sites on my system, because I will want to work on many client websites who some will use windows/IIS hosts and others apache.
Or is it that with just IIS, I can test all sites in my dev environment since IIS supports everything apache does and more?
I am not sure if when developing a site for a client with a linux/apache host there is a lot of apache configuration that I would not be able to test on my local IIS server?
In fact, I am not even sure if a web programmer would need to do anything different at all dependant on which server type their code was running on.
I have a dedicated machine with Xen configured... Dom0 stuff runs great.
I have a pre-made image from jailtime.org, with an ubuntu.7-04.img, ubuntu-7-05.xen3.cfg, and ubuntu.swap -- obviously, the actual image, the config file, and the swap file.
Starting it fails:
Code:
$ sudo xm create ./ubuntu.7-04.xen3.cfg
Using config file "././ubuntu.7-04.xen3.cfg".
The config file:
Code:
kernel = "/boot/vmlinuz-2.6.18-xen"
memory = "256"
name = "ubuntu"
vif = [ 'mac=00:01:02:03:04:07, bridge=xenbr0, vifname=vif1.0' ]
dhcp = "dhcp"
disk = ['file:/home/matt/vms/ubuntu-7.04/ubuntu.7-04.img,sda1,w', 'file://home/matt/vms/ubuntu-7.04/ubuntu.swap,sda2,w']
root = "/dev/sda1 ro"
Actually, a couple derivative questions here...
- Are the /boot and /dev/sda1 literal? That is, do they relate to Dom0 names (/boot on the server, and /dev/sda1, my "real" disk), or are they telling the new DomU what to call them?
- I don't want DHCP.... Do I change dhcp to "0" / "false," or do I specify an IP?
I've found a zillion guides out there, and they cover everything about setting up Xen, except for this one part, it seems?
I have a server in my office. I also have a ADSL router which is connected in ethernet. Now my question is how do I make this machine Live?
View 4 Replies View Relatedwhat do you think of Machine Hosting? Are they good? Here is the url: [url]
I am personally searching for a low cost hosting service that provides functionality to deploy web applications developed with Java.
On their website they say that they support Apach 2.0 as a webserver for around $9 a month! Is this a good deal?
I am mostly refering to Plan 1
[url]
Also are there any disadvanteges if I go with them? (any obvious ones at least)
Can I install say, VMWare on a VPS and use it the same way as if it were installed on an OS running on the physical hardware?
View 9 Replies View RelatedI recently got a 2nd dedicated server to run MySQL for me. I host game servers that require MySQL. I usually ran it locally on my dual xeon machine until it started using a lot of resources, more then all of the game servers combined. So I moved my MySQL to a dual core machine. The MySQL machine is in the same datacenter as my dual xeon machine (I rent from softlayer). So I am using the private network ip to communicate between the 2 servers. However the queries are lagging out a lot, and causing my game servers to freeze up. I never had this problem when it ran locally, both servers are 100mbit and the mysql machine has a 15K RPM hardrive. The queries seem to not go through as fast as they did when it ran locally (of course), but not as much as I thought it would. Is there anything I can do to make it operate faster? Also, both servers are Windows 2003 Server.
View 2 Replies View RelatedI feel like I'm making this much harder than it is. I have one server with multiple IPs. I list my ns1 as (example) 1.2.3.4 and ns2 as 1.2.3.5. All of that's squared away, and it all resolves properly.
Except that tinydns only listens on 1.2.3.4, and I can't for the life of me figure out how to make it listen on the second IP too. Consequently, queries to ns2 fail.
What I ended up doing was just starting a second session with /etc/tinydns2 (and /service/tinydns2)... This is surely not the right solution, but it's made even worse because my "cp -R /service/tinydns /service/tinydns2" command doesn't do anything.
I was wondering what the average web host server machine configuration would be.
View 11 Replies View Relatedi had made my own nameserver on my cpanel server running freebsd OS
im testing one domain uletbulu.org using the nameserver i had set but its seem the domain cannot resolved properly
im try checking it and here is the result
ERROR: Some of your nameservers listed at the parent nameservers did not respond. The ones that did not respond are:
64.85.161.121 Error=Port Unreachable
64.85.161.120 Error=Port Unreachable
completely result is here
[url]
from error msg i think that my server blocked bind port and also tcp connection to bind port
to move data (a lot) from one server to another. The thing is that the old server's host will not allow SSH access, not even just for a few hours. The new server is a dedicated, so I will of course have SSH there, but how should I handle this situation?
The data in question is massive..Much too much to download to the PC via FTP and upload to the new server. I'm not too familiar with FTP on linux. Could I use SSH on the new machine to FTP into the old machine and recursively grab everything (IIRC, the FTP protocol doesn't allow recursive gets...although it's been awhile since I've used CLI FTP)
I have a small linux box that I use as a router (CentOS 4.4 on OpenVZ).
I have quite a few clients connecting to it and using it as a gateway.
I would like to monitor their bandwidth usage if possible, I have iptables installed and am using iptables -L -v -n, which shows me the data transferred on specific ports that I am forwarding to them.
So, is there an bit of software out there that will monitor each IP for all UDP and TCP traffic, and wont be lost if I restart iptables.
I have looked at Cacti, but have never managed to get it to work...?
I had some questions about it.
I'm planning on using a C2D Quad Core and was wondering the following
I am planning on using non-ecc ram is that ok for a server?
Will a normal board work instead of a server board?
Try following PHP code
<?php echo 2022886285 & -2147483649; ?>
It should return 2022886285
- On my current Web hosting: It works OK.
IXWebhosting.com
Dell PowerEdge 2650
DUAL Intel Xeon 2.8GHz, 512K Cache
RedHat - 7.3 OS on your server
- On my new Dedicated Web hositn: It return just 0. Problem!
HostGator.com
Pentium 4 2.4Ghz
CentOS Enterprise.
Why One simple Bitwise statement doesn't work on CentOS?
New Hosting company support from HostGator tells me
It's code problem or php problem.
However it works on others.
Please test the statement in your site and Reply the result if it returns proper value or not.