After a downtime of my server i got my main server back but my vps never work.
I am able to ping my ns1 and ns2 and get back correct ips.
But not my vps ip.
When i run vzlist -a i got in status running.
Also in my shared server i got the server up and i can login to whm but my account doesn't work there also.
All additional ip's in my server seems to not work and my DC told me that they are ok....
Can you put two of these supermicro mini servers back to back in a standard rack? I am looking at the [url]
View 14 Replies View RelatedHow can I back up my mail from old server and import to new server?
HostGator support was so good for first couple days now no response in 3 days
We have 2 harddrives on the server and a private network on the back end with limited storage space. Hard drives are SATA II (not in raid). As far as we know, 2nd harddrive is not used for anything yet.
We are new at this and any configuration suggestions would be helpful. What kind of a backup setup would you recommend? What kind of schema ie. full backups, incremental, data backup only, public_html backups?
just wonder if anyone ran into this problem. We were collocating our server with a "certain" provider and decided to move it elsewhere due to their lack of service. Everything was going OK even the outrageous termination fee and the shipping fee that we had to pay. However, after the host received the payment they went completely silent on us ignoring all of our emails and phone calls. I've spoken with our lawyer who estimated the legal actions against them could cost us thousands of dollars. The physical cost of the server was about $2,000 so I'm not sure if legal action would be worth it. Anyone has any suggestions on what else we can try to get our server back.
View 14 Replies View RelatedHow Can I Blocks back connect from web server
The server is with visiteur connection
I try Every Firewall
what is the best way?
What's the best way I can fully back my server up? I use cPanel/Whm
View 1 Replies View RelatedI need a backup server
main tasks
- Download/Upload files from/to my other servers very fast.
- 1 GBps Port
- Storage no more 250 GB .
- 600 GB Traffic
- access the server from the IP no domain
- Cheaper always better : )
What offers / recommendation do you have for me?
I have a problem with the server time, when I reboted the server, the time change 4 hours back. Only the time changed not the time zone.
To solve this, I have to sync the time from WHM and then it get the correct time.
We have a server with a fine company, BocaCom. They are who the IP addresses are we use ultimately registered to. It seems we are being blacklisted by secureserver (isn't that Godaddy?) because the IP does not register to us for our outgoing email. It registers to BocaCom.
Is anyone else having this problem, and how to we get around it? We've contacted BocaCom and are waiting for their reply. Is this an IP issue or am I reading the secureserver reply wrong?
----------------
Dear Sir/Madam,
While there is indeed an rDNS record created for 72.35.xx.xx, it does not point back to the original A record. This will need to be updated before we can look further into unblocking the IP.
----------------
Many of the VPS providers I've looked at don't back up the servers that house the VPSs and as such don't back up the VPSs either - have you considered what would happen should the VPS itself be erased (such as what happened to vaserv/fsckvps not too long ago)?
View 14 Replies View Relatedwe are moving a website to a different provider. Can someone recommend some free software to back up the site (with ftp)?
View 8 Replies View RelatedThe MS DNS server in one of my Windows 2003 server does not start. When I try to start the server, I get the error Not enough storage available to complete this operation. I have enough of space and memory available in the server and all the other services are working fine. What could be the issue and what is the solution for this?
View 3 Replies View RelatedWe are experienced in Linux VPS Servers, HyperVM, OpenVZ...
But, how shall we start a Windows VPS server?
What software do we need?
I was thinking of Windows 2008 with Hyper-V support, is it the best way?
I just ordered a server from VD. I got an email said that my server was online from 5 hours ago. However, I do not know how to connect my server. They gave me 2 IPs but when I clicked those, I got an error like this:
Firefox can't establish a connection to the server at *.*.*.*.
and they said that my Directadmin control panel will be installed shortly, but after 5 hours, I did not get any more information update from them.
Can the guys tell me what should I do? Those information is enough for me to run a server?
This is the first time I run dedicate server, so it made me a little bit confused.
I install CSF on a vps (openvz based) server.
Server crashed after im start csf.
Code:
root@server [/etc/csf]# csf -s
Flushing chain `INPUT'
Flushing chain `FORWARD'
Flushing chain `OUTPUT'
Flushing chain `acctboth'
Deleting chain `acctboth'
Restarting bandmin acctboth chains for cPanel
ACCEPT all opt -- in lo out * 0.0.0.0/0 -> 0.0.0.0/0
ACCEPT all opt -- in * out lo 0.0.0.0/0 -> 0.0.0.0/0
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:67
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:67
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:68
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:68
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:111
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:111
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:113
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:113
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpts:135:139
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpts:135:139
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:445
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:445
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:513
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:513
DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:520
DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:520 ....
Server easily install but it could not be start ,,,it says that Server Root must be a directory..
View 1 Replies View RelatedI'm having issues after changing my system time and rebooting for whatever reason it didn't take effect but now my VMWare servers wont boot. I get this error when trying to run a vmware-cmd
[root@plexus ~]# /usr/bin/vmware-cmd -l
/usr/bin/vmware-cmd: Could not connect to vmware-authd
(VMControl error -14: Unexpected response from vmware-authd: 511 Error connecting to /usr/sbin/vmware-serverd process.)
[root@plexus ~]#
also when i try logging into the web interface same error.
trying to start my IIS's SMTP Default Virtual Server. I keep getting the same message when right clicking and selecting start:
"The service did not respond to the start or control request in a timely fashion.
Check the Windows Event Viewer for details."
There is no entry in the event viewer for this error. I have searched the Microsoft web site and done the default Google seach but can't find anything directly relating to this probem.
Server down after start apache! Too many connection!
When im start apache on server, its crashed.
I am see following error, in access log:
Where is issue and how can fix it?
-bash-3.1# tail -f /var/log/httpd/access_log
::1 - - [16/Nov/2008:20:54:23 +0330] "GET / HTTP/1.0" 403 5043 "-" "Apache/2.2.3 (CentOS) (internal dummy connection)"
::1 - - [16/Nov/2008:20:54:24 +0330] "GET / HTTP/1.0" 403 5043 "-" "Apache/2.2.3 (CentOS) (internal dummy connection)" ....
My server is a dual cpu quad core box. So I see 8 processors in WHM status page. Load is between 1-2 most of the time, sometimes a little bit above 2.
I've never used a dual cpu quad core machine before. When should I start worrying about the server load? When load is above 8 or what?
I'm running 2 Counter Strike Source Servers on one host machine and these are the commands I run:
Server #1:
cd /home
cd srcds1
screen -S css ./srcds_run -console -game cstrike -port 27015 +map cs_office +maxplayers 20
Server #2:
cd /home
cd srcds2
screen -S css ./srcds_run -console -game cstrike -tickrate 66 -port 27035 +map surf_easy +maxplayers 40
How would I enter the commands above in the webmin "Create a new bootup and shutdown action" feature so that I can start the game servers more easily?
I am using Wamp server 2.2.
I recently made some changes to the Apache configuration to allow me to make a virtual host for the Zendframework. the change i made were as follows:
<VirtualHost 127.0.0.1>
ServerName zendy
DocumentRoot "C:workspacezendypublic"
SetEnv APPLICATION_ENV "development"
<Directory "C:workspacezendypublic">
DirectoryIndex index.php
AllowOverride All
Order Deny,Allow
Allow from all
</Directory>
</VirtualHost>
Since these changes were made, my wamp server will not start up. the wamp bar remain red.
What I have to do to find out/trace where the fault is?
I am having some server issues.
A part of my sshd_config:
Port 2255
Protocol 2
ListenAddress 8x.xx.xx.46
PermitRootLogin no
Recently, when I want to connect to my server using putty, I get "Connection Refused" using the above IP address and port.
When I enter the above IP address (or any other IP address that is stored/set on the server) and port 22, I get "Server refused to start shell/command".
It did work before, using 8x.xx.xx.46:2255 and when I enter 8x.xx.xx.46:22 it will block. But now... not anymore.
I am using "Direct Admin" to do a "System Backup". I do see the right port and IP address in the sshd_config file.
How can I fix this? I can not login the server anymore, however I am going to the datacenter tomorrow.
OS: CentOS
Installed firewall / protection: APF + BFD
Control Panel: Direct Admin
A lot of people start off with a dedicated server when they first start their website because they feel they will eventually need it anyway. They also don't want to go through the trouble of transferring their website in the future. Do you think it's wise for a new website to do this or do you feel they should start off with shared hosting and then transfer their website after it already has a lot of traffic?
View 7 Replies View RelatedI'm running Apache 2.2 on Windows 7. I'm a casual user of the Apache server, and the server I'm running is only used to develop a Silverlight application on the local machine, nothing more. The following problem is apparently a non-systematic error (sometimes the server can startup, sometimes it cannot. If it cannot, it sometimes can after a reboot (a service startup race condition?))
I get error when starting the server: "The requested operation has failed!"
When I run "http.exe" from a command prompt I get:
Quote:
httpd.exe: Could not reliably determine the server's fully qualified domain name, using 10.0.0.100 for ServerName
(OS 10048)Only one usage of each socket address (protocol/network address/port) is normally permitted. :
make_sock: could not bind to address 0.0.0.0:80
No listening sockets available, shutting down
Unable to open logs
It does not write anything in the "error.log". It cannot? why? rights? but it could yesterday! anything changed from yesterday, no nothing!
I have tried to start the server many times today, and it has not written anything in error.log. Looking in the log there are many entries from yesterday, when the server probably worked!?
Okay there most be something using port 80 then!
Output from "netstat -o -n -a | findstr :80" is nothing! netstat says there is nothing listening on port 80.
I'm running SQL Server 2008 Express, and "Reporting Service" would be a prime candidate for listening on port 80, but netstat says it is not!
I'm using the ZoneAlarm firewall (the Apache server has been given full trust and permissions), and it has worked previously, I belive it cannot be the problem.
I'm using Avast anti-virus, but everything is disabled in it, and I'm only using it to run a virus check from time to time.
(I don't think it has anything to do with the "fully qualified domain name", because the setting it is complaining about has always been the same, also when the server is actually working, from time to time)
Can anyone recommend a Apached and MYSQL optimization expert? I just some optimization done on mysql and apache upgraded... but pache wouldn't restart with the following entries:
MinSpareThreads 25
MaxSpareThreads 35
ThreadsPerChild 25
if i remove above then it starts... but my CPU spikes and I am getting a ton of errors emailed to me:
Invalid SQL:
SELECT COUNT(DISTINCT(userid)) AS count FROM vb_session WHERE vb_session.userid>0 AND vb_session.lastactivity>1245294346;
MySQL Error : Out of memory (Needed 8388580 bytes)
Error Number : 5
Request Date : Wednesday, June 17th 2009 @ 09:39:06 PM
Error Date : Wednesday, June 17th 2009 @ 09:39:06 PM
Its constantly complaining about this same query and i thought i removed all of the vbulletin options...
i am pulling my hair out... cuz my server isn't swapping, ther are 0ver 8GBs in cache.... but my CPU goes up
Here is original problem thread...
[url]
2nd post has recommended config... and my subsequent probs
when I run DNS report for some of domain of my it give few errors on
1)
SOA MNAME Check Your SOA (Start of Authority) record states that your
master(primary) server is: Fail
2)
Invalid characters Checks if MX records use valid host names, without any invalid characters. FAIL
how to fix this using WHM.
I've installed apache, php5 and php handler but couldn't able to the start the server and my error log is below.
stalling the Apache2 service
The Apache2 service is successfully installed.
Starting the Apache2 service
The Apache2 service is running.
ce] Apache/2.0.64 (Win32) configured -- resuming normal operations
[Mon Apr 22 21:16:59 2013] [notice] Server built: Oct 18 2010 01:36:23
[Mon Apr 22 21:16:59 2013] [notice] Parent: Created child process 1060
[Mon Apr 22 21:16:59 2013] [notice] Child 1060: Child process is running
[Mon Apr 22 21:16:59 2013] [notice] Child 1060: Acquired the start mutex.
[Mon Apr 22 21:16:59 2013] [notice] Child 1060: Starting 250 worker threads.
[code]....