I just ordered a server from VD. I got an email said that my server was online from 5 hours ago. However, I do not know how to connect my server. They gave me 2 IPs but when I clicked those, I got an error like this:
Firefox can't establish a connection to the server at *.*.*.*.
and they said that my Directadmin control panel will be installed shortly, but after 5 hours, I did not get any more information update from them.
Can the guys tell me what should I do? Those information is enough for me to run a server?
This is the first time I run dedicate server, so it made me a little bit confused.
A lot of people start off with a dedicated server when they first start their website because they feel they will eventually need it anyway. They also don't want to go through the trouble of transferring their website in the future. Do you think it's wise for a new website to do this or do you feel they should start off with shared hosting and then transfer their website after it already has a lot of traffic?
The MS DNS server in one of my Windows 2003 server does not start. When I try to start the server, I get the error Not enough storage available to complete this operation. I have enough of space and memory available in the server and all the other services are working fine. What could be the issue and what is the solution for this?
I install CSF on a vps (openvz based) server. Server crashed after im start csf.
Code: root@server [/etc/csf]# csf -s Flushing chain `INPUT' Flushing chain `FORWARD' Flushing chain `OUTPUT' Flushing chain `acctboth' Deleting chain `acctboth' Restarting bandmin acctboth chains for cPanel ACCEPT all opt -- in lo out * 0.0.0.0/0 -> 0.0.0.0/0 ACCEPT all opt -- in * out lo 0.0.0.0/0 -> 0.0.0.0/0 DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:67 DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:67 DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:68 DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:68 DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:111 DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:111 DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:113 DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:113 DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpts:135:139 DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpts:135:139 DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:445 DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:445 DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:513 DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:513 DROP tcp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:520 DROP udp opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 udp dpt:520 ....
I'm having issues after changing my system time and rebooting for whatever reason it didn't take effect but now my VMWare servers wont boot. I get this error when trying to run a vmware-cmd
[root@plexus ~]# /usr/bin/vmware-cmd -l /usr/bin/vmware-cmd: Could not connect to vmware-authd (VMControl error -14: Unexpected response from vmware-authd: 511 Error connecting to /usr/sbin/vmware-serverd process.) [root@plexus ~]#
also when i try logging into the web interface same error.
trying to start my IIS's SMTP Default Virtual Server. I keep getting the same message when right clicking and selecting start:
"The service did not respond to the start or control request in a timely fashion.
Check the Windows Event Viewer for details."
There is no entry in the event viewer for this error. I have searched the Microsoft web site and done the default Google seach but can't find anything directly relating to this probem.
A part of my sshd_config: Port 2255 Protocol 2 ListenAddress 8x.xx.xx.46 PermitRootLogin no
Recently, when I want to connect to my server using putty, I get "Connection Refused" using the above IP address and port. When I enter the above IP address (or any other IP address that is stored/set on the server) and port 22, I get "Server refused to start shell/command".
It did work before, using 8x.xx.xx.46:2255 and when I enter 8x.xx.xx.46:22 it will block. But now... not anymore.
I am using "Direct Admin" to do a "System Backup". I do see the right port and IP address in the sshd_config file.
How can I fix this? I can not login the server anymore, however I am going to the datacenter tomorrow.
OS: CentOS Installed firewall / protection: APF + BFD Control Panel: Direct Admin
I'm running Apache 2.2 on Windows 7. I'm a casual user of the Apache server, and the server I'm running is only used to develop a Silverlight application on the local machine, nothing more. The following problem is apparently a non-systematic error (sometimes the server can startup, sometimes it cannot. If it cannot, it sometimes can after a reboot (a service startup race condition?))
I get error when starting the server: "The requested operation has failed!"
When I run "http.exe" from a command prompt I get:
Quote:
httpd.exe: Could not reliably determine the server's fully qualified domain name, using 10.0.0.100 for ServerName (OS 10048)Only one usage of each socket address (protocol/network address/port) is normally permitted. : make_sock: could not bind to address 0.0.0.0:80 No listening sockets available, shutting down Unable to open logs
It does not write anything in the "error.log". It cannot? why? rights? but it could yesterday! anything changed from yesterday, no nothing!
I have tried to start the server many times today, and it has not written anything in error.log. Looking in the log there are many entries from yesterday, when the server probably worked!?
Okay there most be something using port 80 then!
Output from "netstat -o -n -a | findstr :80" is nothing! netstat says there is nothing listening on port 80.
I'm running SQL Server 2008 Express, and "Reporting Service" would be a prime candidate for listening on port 80, but netstat says it is not!
I'm using the ZoneAlarm firewall (the Apache server has been given full trust and permissions), and it has worked previously, I belive it cannot be the problem.
I'm using Avast anti-virus, but everything is disabled in it, and I'm only using it to run a virus check from time to time.
(I don't think it has anything to do with the "fully qualified domain name", because the setting it is complaining about has always been the same, also when the server is actually working, from time to time)
Can anyone recommend a Apached and MYSQL optimization expert? I just some optimization done on mysql and apache upgraded... but pache wouldn't restart with the following entries:
if i remove above then it starts... but my CPU spikes and I am getting a ton of errors emailed to me:
Invalid SQL: SELECT COUNT(DISTINCT(userid)) AS count FROM vb_session WHERE vb_session.userid>0 AND vb_session.lastactivity>1245294346;
MySQL Error : Out of memory (Needed 8388580 bytes) Error Number : 5 Request Date : Wednesday, June 17th 2009 @ 09:39:06 PM Error Date : Wednesday, June 17th 2009 @ 09:39:06 PM
Its constantly complaining about this same query and i thought i removed all of the vbulletin options...
i am pulling my hair out... cuz my server isn't swapping, ther are 0ver 8GBs in cache.... but my CPU goes up
Here is original problem thread...
[url]
2nd post has recommended config... and my subsequent probs
I'm facing problem with latest Apache 2.4.9. Previously we used Apache 2.4.7 ​version which supports DER SSL certificates. But Latest Apache(2.4.9) is not working with DER SSL certificates. I have to convert DER certificate to PEM format to start the Apache server. Am i missing anything ? Is DER certificate not supported in Apache 2.4.9 ?
Problem detected! 19:58:32 [Apache] Port 80 in use by "Unable to open process" with PID 4! 19:58:32 [Apache] Apache WILL NOT start without the configured ports free! 19:58:32 [Apache] You need to uninstall/disable/reconfigure the blocking application 19:58:32 [Apache] or reconfigure Apache and the Control Panel to listen on a different port 19:58:32 [Apache] Attempting to start Apache app... 19:58:32 [Apache] Status change detected: running 19:58:33 [Apache] Status change detected: stopped 19:58:33 [Apache] Error: Apache shutdown unexpectedly. 19:58:33 [Apache] This may be due to a blocked port, missing dependencies, 19:58:33 [Apache] improper privileges, a crash, or a shutdown by another method. 19:58:33 [Apache] Press the Logs button to view error logs and check 19:58:33 [Apache] the Windows Event Viewer for more clues 19:58:33 [Apache] copy and post this 19:58:33 [Apache] entire log window on the forums
that is my error message I have changed skype's port from using port 80 and also uninstalled IIS from microsoft I have only installed xampp on its own without wamp server so that they dont conflict.
I noticed that my spamassassin wasn't running on my server. so I restarted the service from the plesk panel but got the following message:
Error: Unable to make action: Unable to manage service by spammng: spamassassin: unrecognized service ERROR:spammng:Unable to start SpamAssassin service ('--start', 'spamassassin')
So I SSH'ed into my machine and saw that spamassassin wasn't running.
The I reinstalled spamassassin from the "add and remove product components", but that didn't change anything. Still the same error.
It seems the servers dns will not resolve and has crashed. When starting the "Named" service, here is the error:
Error in named configuration: zone 0.0.127.IN-ADDR.ARPA/IN: loaded serial 20010622 zone 215.170.107.in-addr.arpa/IN: loaded serial 1433121512 zone lanewgirl.com/IN: NS 'ns.mydomain.com' has no address records (A or AAAA)
zone mydomain.com/IN: not loaded due to errors.
_default/mydomain.com/IN: bad zone
zone mydomain2.com/IN: NS 'ns.mydomain2.com' has no address records (A or AAAA)
I have downloaded httpd-2.4.9-win32.zip from VC10 Win32 link which includes IPv6 Crypto apr-1.5.0 apr-util-1.5.3 apr-iconv-1.2.1 openssl-1.0.1h zlib-1.2.8 pcre-8.34 libxml2-2.9.1 lua-5.1.5 expat-2.1.0.
I unzipped and installed on my system. Configured SSL. I installed in directory C:Apache24
I am currently using a shared hosting but due to increasing traffic and server load my existing host is not able to provide reliable services and I am planning to upgrade my hosting service.
While I was searching for Dedicated Servers, I learnt about Virtual Dedicated Servers but I am not very sure about their reliability? Are Virtual Dedicated Servers useful? My website current serves over 2500-3000 visitors a day resulting in 30,000 pageviews and I am expecting the traffic to grow by atleast 2 folds in the next few months as I start some PPC campaigns and Email Marketing for my website. Can a Virtual Dedicated Server cater such needs assuming my website to be more of less dynamic website written in php?
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription 2) Look in virtual directories and navigate to error documents 3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
