Server-Logix - "no Route To Host"
Oct 27, 2009I have a DS at Server-Logix. It has suddenly become unavailable; tra traceroute to it fails (host unreachable)
Looks like connectivity problem with a datacenter/other routing problem.
ADVERTISEMENT
FTP To Server Gets Connected: No Route To Host
May 31, 2008This worked yesterday.
Now I get connect: No route to host when I try to FTP.
What to do?
I can ping the IP without problems.
Review For SL [Server Logix]
Oct 18, 2009I recently was looking for a good place to colocation some servers and new clients! Bought a P4 from "JSCL" and the story starts out like this....
Jason and I had talked (yes he and me are two different people) on AIM for about 1 hour and then I decided Jason had the right DC for me and my clients!
So far each question I've had about network, price, data, etc has been fulfilled within 12 hours or less! The day I had my P4 colocated it took a few days because they had a mass order so that time took a little bit but it was quick, faster then what I had expected though!
Jason has given me the best prices for colocation! Now I can offer my clients the best services on the net, I truly do not think there is a cheaper spot that fits my needs!
WOW When I started to play on the server I thought it was a quad core because the network is so DARN FAST! I truly am happy that I had found Jason when I did! I have already managed to have a few people talking to me about getting colocation with me!
It was quite funny because I was nagging at him for a while and I felt really bad because he should be sick of me but ya know he wasn't! Best darn support I have ever seen!
This is only a week review I'll review more after one full month!
Ssh (client): No Route To Host
May 31, 2008ssh is driving me CRAZY right now... On an almost stock CentOS 5.1 install (inside a Xen VPS, though), I changed sshd to listen on 2222 instead of 22 and restarted sshd.
All of a sudden:
Code:
matt@t60:~$ ssh -p2222 64.191.108.xxx
ssh: connect to host 64.191.108.xxx port 2226: No route to host
I should note that I'm actively logged into that IP in another window, and that it responds to ping. There most certainly is a route. Yes, I've quadruple-checked that I have the right IP. And I use the -p2222 daily to connect to another machine. This is a virgin CentOS install; I just changed the "Port 22" line to "Port 2222" and restarted sshd (/etc/init.d/sshd restart).
I am not behind any sort of firewall, unless CentOS installs one that I don't know about. (I own the physical hardware, not just the virtual machine.)
I figured it had to do with this error in /var/log/secure
Code:
May 31 19:18:39 relay120 sshd[23359]: Server listening on :: port 2222.
May 31 19:18:39 relay120 sshd[23359]: error: Bind to port 2222 on 0.0.0.0 failed
: Address already in use.
So I changed (uncommented) the ListenAddress directive to:
Code:
ListenAddress 64.191.108.xxx
and restarted sshd again.
Proftpd :: Data Socket Error: No Route To Host
Apr 11, 2008i get this error
I no u gotta added 2 lines in proftpd.conf but i can't seem to find it no where! here's my errors!
[L] PASV
[L] 227 Entering Passive Mode (64,85,164,21,193,144).
[L] Opening data connection IP: 64,85,164,21 PORT: 49552
[L] Data Socket Error: No route to Host
[L] List Error
[L] PASV
[L] 227 Entering Passive Mode (64,85,164,21,202).
[L] Opening data connection IP: 64,85,164,21 PORT: 57546
[L] Data Socket Error: No route to Host
[L] List Error
[L] 421 No Transfer Timeout (300 seconds): closing control connection.
[L] Connection lost: 64,85,164,21
i really do not no there's a command for passive mode or something in proftpd.conf can't seem to find it no where!
Trace Route To My Server - Is This Normal ?
Jun 10, 2007Hi over the last week ive been having numerous problems with hosting accounts on 2 different servers which has lead me to think that my 'security' is not 'secure' and a malicious user is at play. im in the uk on broadband on a private connection to the internet - no-one else should be sharing this connection. This is the traceroute from my connection at home to the server ive had the most problems with - is this normal?
Traceroute has started ...
Plesk 12.x / Windows :: Route 53 Extension To Manage Slave DNS Server
Jun 16, 2015I installed Route 53 extension to manage a slave DNS server but when a add or remove some domain the process does not complete, Plesk stays loading without finish domain creation.
When I disable the extension, Plesk create and remove domains without any problem.
What could be happening?
IP Trace Route
May 13, 2008I got 3 IP addresses i am trying to trace and I want to know where this person has send me those from. Is is possible to get exact addresses/locations?, where the person who sent me the emails is from? and Infos which websites have been visited?
This are the 3 IP's i have got:
216.139.189.105
41.204.234.10
82.13.210.203
After Trace Route, What Next ?
Jul 3, 2009After Trace route whats the next thing to do ? When my ISP dynamic IP address is some like and starts with 112.0.0.0 I cannot see all sites on the server. So what I did run a tracert on DOS prompt. After 9 hops and reach this IP 216.18.239.6 everything timed out and it cannot reach my server.
I already tested several Internet access and its reaching the server except my home DSL with the IP 112. I also checked if the IP is block on the firewall but its not present on the block list. I also mentioned this with my internet provider and still waiting for notification.
what to do next?
Route My IP Space
May 22, 2009what is needed is a dedicated server or colocation in which my portable IP space (a class c assigned to me in 1995) can be routed to in its entirety. We will then have a VPN back to our own site. This could be accomplished by the ISP BGP peering, or simply announcing the routes themselves. We've got clue in routing, both in OpenBSD and IOS.
The machine doesn't have to be too powerful, and needs little storage space, but the bandwidth provided has to be decent. This is for a hobbyist rather than commercial project, so price is an issue.
Trace Route To New Site
Oct 8, 2007I recently moved a customer's site to a new server. Everything went smoothly except for the fact my customer cannot access the new site. When he pings it he gets the right IP address but it just times out.
The URL is regalfire.co.uk
I asked him to run a tracert command and it seems to find the right path but stops just short of finding the server. The last server he connects to is ge-5-2.the.uk.euroconnex.net [87.127.231.90] which is the same as me. The next step is the actual server but for him it just times out.
I can see the new site fine. His ISP is Virgin Media and I have asked several other customers with the same ISP and they can see the site OK.
He has flushed his DNS cache and the problem remains.
Does anyone have any ideas what I could try next?
How To Null Route China?
Mar 16, 2008I use geoip so that if ($country="CN") { die(); }
This works on my site. But for some reason I still get the occasional IP's through.
I looked at my Lighttpd server-status and I have 600 connections from 3 different IPs that come from China.
I typically use ./route add -host 222.221.81.3 reject as the way to block them, but it changes from time to time. The Chinese are using 90mbps of bandwidth and I want it to stop as they must be directly hotlinking my content.
How to null route large blocks from China? Please note I want to keep Hong Kong, Macau and Taiwan.
Need To Create A Static Route
Apr 9, 2007Recently two servers of mine have stopped communicating with each other and I've been told to create a static route between the two, I am using CentOS 4.4 and not sure what the exact syntax would be
I also have the gateway IP which would be needed.
Does OER = Less Internap BW And Less Route Science & FCP
Aug 31, 2007As we are finishing our migration plans to Cisco OER. I would like to get everyone's thoughts on the low latency "brand name" internap bandwidth.
Do you think that the high priced brandname is going to continue with Cisco finally releasing OER to what a large number of datacenters use as their primary core switch? In my eyes the FCP and the Avaya/RouteScience platform just lost a lot of value. The OER product looks very complete and in testing works excellent, the final verdict will be in what the platform actually does.
If you are wondering Cisco OER information can be found here [url]
Route Between Vlans In Same Subnet On BigIron
Jun 9, 2007I'm looking for a solution that I can place a firewall between 2 vlans on
a BigIron router with L3 enabled.
For this moment there is one big vlan2 with a ip-route 0.0.0.0 0.0.0.0
123.123.123.123 and a router-interface ve2 with the IP of the router, the
address I use as gateway on the machines behind it.
The WAN port has the IP address to communicate with to the GW of the
carrier-router (123.123.123.122)
Because I want to let the BigIron the routing I was thinking of 2 vlans,
one for the lan-vlan and one for the wan-vlan, but this will be a problem
because I only have one IP-block what I can use.
So the sitiuation must be as follow on the BigIron:
WAN => vlan2 => firewall => vlan3(lan)
Because of the fact that the firewall will be transparent, this should be
no problem to place it between the vlans. The actual problem is how to
manage this. In simple words, I should be able to replace the firewall
with a cross-cable and it should still work.
Cisco for an example has a SVI solution for this, but I can't find such
thing for a Foundry router.
Cisco Switch IP Route Setup
Dec 1, 2008Cisco Switch IP Route setup
This is probably an easy and simple task for someone that have a good knowledge in Cisco, BGP and Blackhole/Synchole communities.
We do have a Cisco 2948G that is our border and through this equipment we apply Blackhole (a sequence of commands to filter all the traffic from the world except our country, this is done by communities that is setup in cisco).
These are the sequence of the commands to apply it for IP 189.1.XXX.40
Enter configuration commands, one per line. End with CNTL/Z. asw-hl01(config)#router bgp 184XX
asw-hl01(config-router)#network 189.1.XXX.40 mask 255.255.255.255 asw-hl01(config-router)#exit
asw-hl01(config)#access-list 50 permit 189.1.XXX.40
asw-hl01(config)#ip route 189.1.XXX.40 255.255.255.255 Null0 250 asw-hl01(config)#
I have another Cisco 2948G that is connected in a FastEthernet port of the border above, and this other cisco is holding another subnet. To make it clear,
Border - I have 189.1.XXX.1 ~ 189.1.XXX.127 (subnet 255.255.255.128)
Cisco2 - I have 189.1.XXX.128 ~ 189.1.XXX.255 (subnet 255.255.255.128)
This is being done through a ip route from Border to Cisco2 to forward subnet 128 ~ 255 to the switch,
ip route 189.1.XXX.128 255.255.255.128 172.16.1.2
Ps: 172.16.1.2 is the internal IP for switch2
Now we go to the problem. If I want to apply a Blackhole (those sequence of commands for an IP located at subnet 128 ~ 255 switch2) it block all the traffic for that given IP, and I cant get access from national backbones. To make it clear,
Blackhole for IP 1 ~ 128 - It works fine
Blackhole for IP 128 ~ 255 - It doesnt work correctly, instead of blocking only international traffic its blocking everything in the world
How Important Is The InterNap FCP Or Route Science
Mar 12, 2007I wonder how it effects to network performance? The network will be faster? How much? The normal routers can choose the best routes too, is it correct?
View 14 Replies View RelatedDetecting Network Problem Along The Route
Dec 3, 2007Is there any way to detect network problem/congesting along the route? Assumed that you only have a shell access to the server.
I usually do tracepath/traceroute and ping each hop to see if there's any packet loss. It doesn't seem to be effective as many people say router will drop the packet when it's busy/overloaded depending on configuration.
Route By IP Address Over Tun0 - 'ip Rule Add From A.b.c.d'
Jul 11, 2007Would anyone be kind enough to give me some pointers to route packets from a specific ip on my subnet via the tun0 OpenVPN interface, and all other hosts out the default route of the main routing table
(192.168.1.1 on br0)?
i.e. 192.168.1.2-9 -> via br0, and 192.168.1.200 -> via tun0
I have created the tables:
mkdir /etc/iproute2
echo 201 table1 >> /etc/iproute2/rt_tables
ip rule add from 192.168.1.200/32 table table1
But i am really stuck from here. I tried adding default routes in the table1 but all traffic stops at this point (i am pinging from the host 192.168.1.200 out onto the net, it works as soon as this command below is entered it times out):
ip route add 10.19.0.5 dev tun0 scope link src 10.19.0.6 table table1 (not sure if this is needed - either way doesnt work with or without) ip route add default via 10.19.0.5 dev tun0 table table1
I did try: ip route add default dev tun0 table table1. and again that fails to work. I appreciate this isnt a guessing game hence moving to post here in hope of some expert advice.
Routing table for the main table (table 1 contains the entries from above commands):
root@OpenWrt:~# ip route list table table1
default via 10.19.0.5 dev tun0
root@OpenWrt:~# ip route list table main
10.20.30.40 via 192.168.1.1 dev br0
10.19.0.1 via 10.19.0.5 dev tun0
10.19.0.5 dev tun0 proto kernel scope link src 10.19.0.6
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.4
default via 192.168.1.1 dev br0
There is a point to point link to the OpenVPN server on 10.19.0.5 with a local address of 10.19.0.6, but im not sure if this needs to be added in the table1? I did try by adding ip route add 10.19.0.5 dev tun0 scope link src 10.19.0.6 table table1, but again still the same issue.
With OpenVPN setup to push the redirect-gateway option, all works well with the routing table and the box acts as a router sending everything through it (table shown below - this works fine apart from everyone is routed through it). As mentioned, I would like the tables default route below to only apply to the host 192.168.1.200. I am posting the table below as this does work for all hosts:
root@OpenWrt:~# ip route list table main
10.20.30.40 via 192.168.1.1 dev br0
10.19.0.1 via 10.19.0.5 dev tun0
10.19.0.5 dev tun0 proto kernel scope link src 10.19.0.6
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.4
default via 10.19.0.5 dev tun0
I am masquerading on tun0 as i will be routing a number of hosts through the router:
iptables -t nat -A POSTROUTING -o tun0 -j MASQUERADE
I also run 'ip route flush cache' after i enter the routing commands but to no avail.
Plesk 11.x / Linux :: AWS Route 53 Integration
Jun 6, 2014I have been stuck on a rather annoying issue using the Route53.php script included within the Plesk Extensions SDK - [URL] ....
Instructions were followed from [URL] .... but there are obvious confusions with the instructions.
First, it never mentions that within Server Management - Extensions you can load the extension and within the AWS Route 53 extension settings and you are prompted to enter in your identifying security keys. But the instructions ask to code these keys into the actual script, must this be done in both places??
Second, how does it operate?? After I install the extension/script must anything else take place? Do I register private dns addresses using my Route 53 ips and the rest is automatic? Should more information be added within the Plesk DNS template area or can I just turn off the DNS/Bind server and only utilize Route 53? There is no feedback in the UI letting you know it is actually on and working.
Third, I have tried to install the script in ssh and I always receive error:
ERR (3) [panel]: PHP Fatal error: Class 'pm_Loader' not found in /......./modules/route53/scripts/route53.php on line 8 I stumbled on a thread discussing this bug at [URL] .... but it leads to a dead end with the author withholding what the bug fix was and how to achieve it.
we utilize AWS Route 53 for a majority of our domains.
PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
Parallels Plesk Panel v11.5.30_build115130819.13 os_CentOS 6
PROBLEM DESCRIPTION
Unable to integrate Amazon Route 53, vague instructions even for a developer.
STEPS TO REPRODUCE
[URL] ....
ACTUAL RESULT
ERR (3) [panel]: PHP Fatal error: Class 'pm_Loader' not found in /../../.../modules/route53/scripts/route53.php on line 8
EXPECTED RESULT
errorcode0 in ssh and some indication the extension is working properly within the Plesk Panel UI.
Route From Level 3 To Qwest On The West Coast
Aug 30, 2009I am looking at getting some Qwest bandwidth at 200 Paul, San Francisco. Not being too familar with Qwest's network and as part of evaluating that decision I did some testing to see how the routes/latency looked from various points on the Internet and from our other data centers. For pretty much all the testing I did from the major tier 1/2 networks, Qwest has great peering in places you would expect resulting is decent routes and low latency.
The strange thing is that the one exception is routes from Level 3. As an example, traffic from various Northern California points on Level 3's network to a test IP on Qwest's network in Sunnyvale all go via Denver to connect to Qwest and then back to the Bay Area. For LA originating traffic, it goves via Dallas. Same thing for Seattle that is going via Denver.
Hard to imagine these two tier 1 providers don't peer at any location on the west coast at all? Is this typical between these two or is there some temporary outage right now? Or is there some peering spat going on between them?
Seems pretty silly for traffic to go 3,000 miles between points that are only 10 miles apart!
Here is an example of the route to a test IP sunnyvale.speedtest.qwest.net (205.171.214.185):
1 vlan89.csw3.SanJose1.Level3.net (4.68.18.190) 0 msec
vlan79.csw2.SanJose1.Level3.net (4.68.18.126) 0 msec
vlan99.csw4.SanJose1.Level3.net (4.68.18.254) 0 msec
2 ae-62-62.ebr2.SanJose1.Level3.net (4.69.134.209) 216 msec
ae-82-82.ebr2.SanJose1.Level3.net (4.69.134.217) 4 msec
ae-72-72.ebr2.SanJose1.Level3.net (4.69.134.213) 204 msec
3 ae-3.ebr1.Denver1.Level3.net (4.69.132.58) 204 msec 200 msec 204 msec
4 ae-11-51.car1.Denver1.Level3.net (4.68.107.6) 224 msec
ae-11-55.car1.Denver1.Level3.net (4.68.107.134) 212 msec *
5 dvr-brdr-01.inet.qwest.net (63.146.26.133) [AS209 {ASN-QWEST}] 24 msec 28 msec 28 msec
6 dvr-core-01.inet.qwest.net (205.171.10.54) [AS209 {ASN-QWEST}] 24 msec 24 msec 28 msec
7 * * *
8 svl-svcs-01.inet.qwest.net (205.171.214.98) [AS209 {ASN-QWEST}] 28 msec 28 msec 28 msec
9 svl-speedtest-01.inet.qwest.net (205.171.214.185) [AS209 {ASN-QWEST}] 28 msec 28 msec 28 msec
Anyone have experiences with using Qwest bandwidth in Northern California they care to share?
Plesk 11.x / Windows :: AWS Route 53 Service Integration
Nov 1, 2013I'm trying to integrate AWS Route 53 DNS service with Plesk 11 but cant get it to work after carefully following the steps in the administrator and developing extensions guides.
View 19 Replies View RelatedApache :: Why All Virtual Hosts Route Back To Same Document
Oct 7, 2014I am trying to configure Apache 2.2 on Linux Mint 17 ( derived from Ubuntu 14 LTS).
I am wanting to create a variety of localhost sites all for development. One of those is built on Laravel 4. I have followed every tutorial I can find yet, for some reason which I do not understand ALL my sites route back to the Laravel root document when called from the browser. Just don't get it.
Here is my hosts file:
Code:
127.0.0.1 localhost
127.0.1.1 vince-XPS-8300
127.0.0.1 auburntree
127.0.0.1 example
Here is the Laravel conf file:
Code:
NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin mail@shaw.ca
ServerName auburntree
DocumentRoot /var/www/auburntree/public
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>
Here is the alternative "example" conf file with just "hello world" in it.
Code:
NameVirtualHost *:80
<VirtualHost *:80>
ServerAdmin mail@shaw.ca
ServerName example
DocumentRoot /var/www/example/test.html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>
Both conf files have been enabled.
Plesk 11.x / Linux :: Dedicated Route For Mails From One Domain?
Jul 21, 2015we have Plesk Version 11.0.9 and I have the following Problem:
(all adresses are examples)
The Server hostet the following Domains and thay all send Mails too:
a.de
b.de
Now I need the following:
If the user "some.user@b.de" send a E-Mail to "user@mydomain.de" the recipient of the Mail have to be changed to "user@mx.mydomain.de". But if "some.user@a.de" do the same, the recipient should not be changed.
Plesk 11.x / Linux :: DNS Panel - Amazon Route 53 Integration
Nov 13, 2013Referencing this article [URL] ....
What does integration with Amazon Route 53 mean? We can use the Plesk DNS panel and it will update Amazon Route 53? Is it an all or nothing, meaning can we choose Amz R 53 for some domains and local DNS (bind) on others?
Plesk 12.x / Linux :: Amazon Route 53 Extension - Multiple Zone Records
Jun 10, 2015I've run into a problem with my Plesk install with Amazon Route 53. I have the latest extension installed (version 1.2 release 2) on Parallels Plesk v12.0.18_build1200140811.16 os_CentOS 7.
The extension has been working perfectly well for me for months. I was adding new domains to Plesk and discovered that as I was making changes to DNS records that a new zone file was created on Route 53 instead of updating the original one.
I did notice that this started happening when I surpassed the 100 domain limit and seems to only happen on domains created at #101 and on. (in other words, I can edit a domain that was created before I got to domain #100 [ie domain #1] and it does not create a duplicate zone file).
I turned on debug mode for plesk and am seeing the json calls with the correct commands coming through.
Redacted sample of an update of Domain #104
[2015-06-10 16:42:43] INFO [panel] The domain alias <b>mydomain.test</b> was created.
[2015-06-10 16:42:43] DEBUG [util_exec] [5578bd6355bc3] Starting: dnsmng /usr/local/psa/admin/bin/dnsmng '--update' 'mydomain.test'
[2015-06-10 16:42:43] DEBUG [util_exec] [5578bd6355bc3] Finished in 0.06322s, Result: TRUE
[Code] .....
So from what I can see the domain +100 is re-creating the domain whereas domain 1 is not - it's just updating it, even though both json commands show the update statement coming through.
Host Our Own Server ...
Jan 9, 2008We currently have a web based apllication running on a web server, in addition we have two servers running as back up. The application running on these servers is business critical, so important we have 100% or near as up time.
We were wondering what is required to run these servers from within our own office, i.e. is it possible/practical/affordable.
We are only a reasonable sized company so cost is important.
Does anyone know if this is possible, and if so what costs might be involved, what we want is total physical access to our servers.