Does anyone know of any providers in 1950 Stemmons inside of Equinix with space less than a full cab? I only need 1/4 cab or less for a router and some switching equipment.
View 2 RepliesLong story short, my father owns a commercial/industrial distribution company where I work as a broker between contractors and manufacturers.
Our current IT Department (who has no formal computer training) has become more useless to me over the past year and are turning my computer into a counterproductive experience which has about driven me off the deep end.
I am therefore deciding to do the unthinkable and break off of the companies server and start working through one of my own here at home.
Ill basically need the machine to act as a place that recieves and stores emails then distributes out to my machines (laptop, desktop)whatever is connected to it, store and access job files/information, and I would like to be able to hook up to my server at work to access a particular program they use on their server, i guess I could probably just install the program on my server too.
I would also like it for personal use and storage as well as possibly hosting my own website (personal website).
I am looking to get a Dell Poweredge 1950 with some solid specs (spend about 4500) to get me going and will be taking classes at the local CC to educate me on running this thing.
I have a few questions about servers in general.
1. Is it possible for me to connect to the current server at my company to exchange or access files/ programs?
2. Can I do this without compromising the security of the server at work? (security is their #1 argument against everything, they told me once that mozilla on my machine compromised the security of the system - BS)
3. Can I run Apples for my workstation and laptop and still interface with the VMware software?
4. I am currently on FIOS here at home, will I need a new dedicated internet line to run the server? what do I need for speed!??
Thanks guys!
I am still totally new to this whole server scene so I apologize if some of my questions are completely insignificant. I am trying to read around as much as possible but I want to get started on this so i thought i would try and get some direction.
what is the difference in the PE 1950 III vs the original 1950? We're trying to get a couple in house but 1st must get a better price than $2,475 for the following specs below.
If anyone has a good sales rep at Dell (ours no longer works there), please send it via PM.
Dell PowerEdge 1950 III Specs:
2xQuad Core Xeon E5410 2.33 GHz Processors
4x1GB Ram
PERC6i RAID Controller
2x500GB 7.2k SATA 3Gbps HDs
CD-Rom/DVD
3yrs Support (5x10 HW, 5x10 NBD)
Price: $2,475.00
you are going to purchase a new rack and the data center offers you a specific amount of power.
you are going to use server's specs like this
Dell PE 1950 III
two processors intel xeon E5410 2.33 GHZ , 24 MB cache, 1333MHz FSB
2x250 sata HDD
8 GB RAM
My question is how many amp's need for one server?
or how much power does one dell PE 1950 III with the previous specs needs?
We must install Dell 1950 With Centos 5 and WHM/Cpanel
How to setting 2 onboard NIC to fail over
The second card have same IP and must start only when the first is down.
Does anyone have a POC for the facility at Filigree Court and 350 Cermak?
I have a customer who needs to speak to someone about some cross connect orders.
I am looking for small colocation space in Equinix NY2.
(There is another topic here [url]where the original poster was looking for dedi/colo in Equinix NY4; I joined that topic with the same request. But after doing my homework, I've adjusted the requirements: firstly, I need colo only, not a dedicated server; and secondly, NY2 is almost as good for my purposes as NY4. And apparently there are more providers offering colo there.)
If you know someone who has (or might have) colo space in Equinix NY2, please, could you recommend them here?
I've heard a internet bandwidth service from Equinix named Equinix direct, how about the quality of this service? Does there somebody have the experience of this service?
View 14 Replies View RelatedI've got a cabinet @ Equinix Ashburn & need to get another one. My understanding is they're full. Does anyone know if Equinix has a new facility there yet?
View 2 Replies View RelatedVPS provider to have enough support resources to provide 24/7 contact and repairs when necessary and good connectivity to UK. So, a fully managed solution.
The Ashburn datacentres seem to have good connectivity to UK.
Any substantial VPS providers based in this area?
There is a big difference in price between these two servers. I suspect the 1950 might be overkill.
My 15 websites are presently on a dedicated Celeron win 2003 server. Would the SC1435 make much difference in speed and tasking?
I presently am using an MS SQL DB hosted on a shared server. Is there any problem in putting the SQL DB on the same server as the sites are on? Is this a good or bad idea? Should the DB go on its own separate disk if on same server?
Can anyone recommend a reseller that offers colo or dedicated out of this facility?
View 7 Replies View RelatedLet's open those floodgates of opinion!
View 14 Replies View RelatedEquinix Secaucus NY2 (275 Hartz) seems to have cooling prolem for the last 1 hour. The whole DC becomes hot. I went out one hour ago, came back and it's so hot now. I don't have temp now, ut I think it's around 85F (up from around 65F typical).
If you are in the DC, have fun working ... I wonder how much longer I can work here Hope they fix this soon, or else......
Is anyone aware of the current availability of colocation space at Equinix in Ashburn, VA? We are currently trying to obtain some space with them but getting my dedicated sales contact to respond is like pulling teeth! Are they so full (and thus full of themselves) that we will have to operate on THEIR terms (if at all)? At this point we are soliciting quotes from other datacenters of known lesser quality just so we can get this deployment live...
View 14 Replies View Related4-5 continuous racks on the 5th or 6th floor of the Equinix Chicago facility.
I've already met with Server Central. Can anyone suggest anybody else who is in that facility? I know it might be a long shot to get that many together, but it doesn't hurt to ask.
colocating servers in the N VA market. I've read numerous recommendations on this forum for the Ashburn Equinix facility. Since it's filling up quickly I've also been looking at the SwitchandData facility in Reston. It appears to have more available space and lower prices. Does anyone have any experience with S&D and what tradeoffs should I be concerned about in looking at an S&D facility instead of an Equinix (in general or specifically those two centers)?
View 1 Replies View RelatedI visited the colo space (1 cabinet) we obtained through an Equinix reseller. There was some confusion as initially we were going into DC2, but they put us into DC3 as that's where they had the space (they have a lot of cages in both DCs).
In the past, I had visited DC2 and it's clear the facility was purpose-built for Equinix. You can tell just by looking at it from the outside, but also inside.
Driving up to DC3 (on Chillum Place), I was first surprised to notice glass windows on the outside of the building (they have the reinforced walls inside of that I was told).
Apparently, the building was some other company's datacenter or offices, which Equinix then refitted their standard-build datacenter inside the building. They also have different man-traps (like a rotating door) compared to DC2, raised flooring (which is not used I was told), and lower ceilings.
I drove around the DC3 building, and the other half of it appears to be some other company's datacenter (based on the generators on the roof). Any idea who that is?
Is DC3 the same quality as DC2? It didn't quite "feel" like the quailty of DC2, but that's just an impression and not based on any empirical evidence. It's also a bit further out there, while DC2 and its new "siblings" (DC4/5) are all adjacent to each other (on Filigree Court).
With the reseller we are using, most of their bandwidth in DC3 cross-connects to their network equipment in DC2, and that's where they peer. That's another thing that makes me feel like DC3 is quite secondary.
Are my feelings unfounded, or should I push our reseller to find a cabinet for us in DC2?
Does anyone know what IP carriers are POP'ed in this new Equnix location in Sunnyvale/Santa Clara California at 255 Caspian?
View 2 Replies View RelatedWhat are you paying for 1U of space in Equinix (Ashburn, Virginia)?
We have about 10 servers already hosted there and our co-locator wants to charge us $100 per 1U (for just space, not bandwidth).
Is this a fair price?
Besides contacting them directly and getting an overinflated price on 1GB of BW and 1u space, is there anyone i can contact who can set me up with better pricing in the Ashburn location? I'm in Baltimore. Washington and Ashburn is about 30 or 40min from away. Something to take into consideration.
View 2 Replies View RelatedDoes anyone know of any resellers in Equinix's datacenters?
View 3 Replies View RelatedDoes anyone have experience with voxel.net as a bandwidth provider? I am considering arranging for IP Transit from them in one of the datacenters they operate in.
I've seen some old concerns raised on these forums about their handling of a server move some time ago (affecting their hosting customers). It could have been misrepresented and could be a thing of the past. Just wondering how professional/reliable/reliable they've been lately.
Also, any other suggestions for quality reliable bandwidth at Equinix Secaucus?
Does anyone know any hosting company that provides VPS located in Equinix Datacenters in Europe (UK / Germany / France)?
View 2 Replies View RelatedDoes anyone have a good contact or contractor that they can recommend in the vicinity of Equinix Ashburn? Preferably someone who's done work in the facility before. We're in DC4 - which is building E I believe.
While Equinix has great staff, sometimes I just need simple things like servers unpacked and racked - things that I'd prefer not to pay $200/hr. for.
We just signed today to move our colo to Equinix Ashburn. I'll send out an email to our customers next week, to explain the upcoming downtime for the move. We do SaaS for our own specialized software product, and all our customers are in universities.. usually professors or administrative assistants.
These people are not technical, so saying something like "really good peering" means nothing to them. However, saying "the facility is so good that Google has servers there" is something they would understand. So, who are the tenants there that an average person would know? I realize there are multiple buildings all next to each other, but I don't think it will be necessary to denote by building. Last time I toured the facility (a while ago), I saw Google and Amazon there.
Anyone with the 411 to this facility?
View 7 Replies View Relatedi am about to sign up for equinix's colocation service in LA. I am just curious if anyone else is paying similarly outrageous cross connect fees.. they are charging $300 for ethernet, and $200 for DS3.
View 14 Replies View Relatedim planning to colo server at [url]
anyone here have any review about them
the main reason for going with them is im gonna choose hongkong data center and
warez are allowed in hongkong so thats why im preferring them , because many
of my hosting customer need to host warez.
so pls get me some Suggestion If You Have Better Options and also
reviews about them.
Anyone have any recommmendations on getting two - three cabinets or open racks with 20-30 amps at 208 volt at Equinix 11 Great Oaks SJC asap?
View 6 Replies View Relatedi dont know what is going on exactly
look at this 2 commands
Code:
root@host [/tmp]# ls -hl
total 92K
Code:
root@host [/tmp]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda5 10153988 406444 9223428 5% /
/dev/sda8 1019208 900620 65980 94% /tmp
how is that possible ls -hl shows thats the space used is 92kb
while df shows 65980 94% for /tmp