I've a problem with my Plesk 12.0.18 Panel ,I tried to login today with Admin_User for a virtual host ,but there was a problem with logging "Error: You have entered incorrect username or password."then I used the User Administrator ,and I found "No web hosting" Under the Domain Name for the workspace !!!and the icons disappeared there are only
-DNS Settings
-Mail Settings
-ODBC Data Sources
-Remove Website
I have a problem with Parallels Plesk v12.0
Hosting type on website became "No web hosting."
When I try to change hosting type to "Forwarding" it changes ok.
If I change hosting type to "Website hosting", I get message "The hosting type for "website name" was successfully changed.", but hosting plan still stay "No web hosting"....
Please recommend Plesk Windows Hosting companies.
View 13 Replies View RelatedThis questing in regards to a web hosting setup using Windows Server 2012 and the latest version of Plesk for Windows (web host edition). The server will be used for hosting whitelabelled reseller accounts.
I understand that the Plesk supports 3rd party DNS providers such as GoDaddy Premium DNS or Amazon Route 53. If I go with either one of those providers for my DNS solution using Plesk, do you know if my reseller customers will be able to use their "Private Name Server" (example. ns1.theirdomain.com, ns2.theirdomain.com)?
I know the Windows OS comes with a DNS built-in, etc. I prefer "not" to host my own DNS server(s) for security, additional cost and other administrative reasons. So, I want to know if any of you out there use external DNS within Plesk successfully for the above setup?
When I try to set a domain's hosting type from "Forwarding" to "Website hosting" I get the following error:
Error:
Unable to start (/c ""C:Program Files (x86)ParallelsPleskadminbinusermng.exe" exist [username]")
at Plesk impersonation(PipeServer::ServerThread::runAs line 886)
at Unable to execute applicationzif_plesk_proc_open line 1274)
What I tried:
- Using different usernames;
- Checked plesksrv.exe permissions [URL] ;
And right now I'm running the PP Reconfigurator tool, option Plesk File Security, cause I think this issue is related with permissions.
I want to have this option on my homepage ! Is this posible whit plesk panel 11.5 or do we need to upgrade??
View 3 Replies View RelatedOSMicrosoft Windows Server 2008 R2 Service Pack 1
Panel version11.5.30 Update #47
We have a few hosting plans setup with different "allowances" for each.The website permissions allow basic html and PHP.In Windows Advanced: The website settings allow for html, php, asp and asp.net
When we change a Basic Hosting plan to Windows Advanced using "Change Plan", it will reassign the subscription/domain to use the new plan, but it will not add-on the extra features in Hosting Settings.
I have a server setup and running shared hosting perfectly. I duplicated one of the plans and just set it to DEDICATED IP. This is for users that will be requiring SSL.
I then went into my panel settings and added in all the additional ip's. It even says in the panel listing "6 dedicated ip's available".
Yet, when I try to re-run the task for provisioning it constantly fails with the message:
Unable to create hosting. Ip address does not exist in client's pool ....
Virtualhosts have got me stuck, I was wondering if someone could help me out.
It seems as though no matter what I try, even though I've read over 3 tutorials I can't get virtualhosts working properly.
Basically I have the
documentroot set to /var/www/html/
I'd like to create a virtualhost (I guess name based?) which has a document root of
/var/www/userdata/
Something like this is what I'm trying to accomplish:
Code:
<VirtualHost data.jcink.com:80>
ServerAdmin bleh@bleh.net
DocumentRoot /var/www/html/userdata
ServerName data.jcink.com
</VirtualHost>
So when someone goes to data.jcink.com it loads up /userdata/. And have all the other subdomains on my site continue to stay where they are.
But every time I try to do anything like that, it doesnt work. All I'm looking for is the proper code to put in the config to get it done, and if that's possible...
I'm trying to configure name-based virtual hosting, and I'm SO close, but I've got a question...
First off, here is the relevant info from httpd.conf
Code:
#
# Use name-based virtual hosting.
#
NameVirtualHost *:80
#
# NOTE: NameVirtualHost cannot be used without a port specifier
# (e.g. :80) if mod_ssl is being used, due to the nature of the
# SSL protocol.
#
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
<VirtualHost *:80>
DocumentRoot /home/thatscri/public_html
ServerName thatscriptguy.com
<Directory "/home/thatscri/public_html">
allow from all
Options +Indexes
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot /home/thatscri/public_html
ServerName www.thatscriptguy.com
<Directory "/home/thatscri/public_html">
allow from all
Options +Indexes
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "/home/billiards/public_html"
ServerName www.billiardstalk.com
<Directory "/home/billiards/public_html">
allow from all
Options +Indexes
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "/home/billiards/public_html"
ServerName billiardstalk.com
<Directory "/home/billiards/public_html">
allow from all
Options +Indexes
</Directory>
</VirtualHost>
1. Does that look alright? Is there anything in there that should be changed up any?
2. The only way that I could get the websites to work with www and without www was to add two virtualhosts for each site. Is there a way around this?
I'm trying to configure my ftp server (lateste proftpd) and I am stucked on virtualhosts.
I'd like to have two different domains have each their own anonymous access, but I only have one IP on my server.
As you might know, ftp does not handle the HOST field in its header as the HTTP protocol does... so I just can't seem to get it work out... I tried adding an alias IP to my main interface, it works great of course but only when I connect from my server to my server...
Currently working on debian ETCH with latest bind, mysql, proftpd and apache2
I am getting this error in apache,
[warn] VirtualHost xx.xx.xx.xxx:xx overlaps with VirtualHost xx.xx.xx.xxx:xx, the first has precedence, perhaps you need a NameVirtualHost directive
I am really having trouble getting a virtualhost to work for an SSL certificate.. my browser just will not load the page..I have tried several different articles on how to setup a virtualhost and none of them seem to work.
My ssl.conf [URL] .....
*Note: I did purchase an SSL certificate - it is not self signed.
I have apache set up and it works fine from the DocumentRoot when I access the server via the IP. I've set up the following virtualhost
<VirtualHost *:80> .....
I use Debian Lenny and I would like to host 2 sites on my apache web server.
So I created two virtualhost files site1 and site2.
Site 1 configuration file:
<VirtualHost *:80>
ServerAdmin mymail@admin.com
ServerName www.mydomain.com
ServerAlias mydomain.com
DocumentRoot /var/www/premier
<Directory /var/www/peremier>
[...]
Site 2 config file:
<VirtualHost *:80>
ServerAdmin mymail@admin.com
ServerName lemonsite.mydomain.com
ServerAlias /lemonsite
DocumentRoot /var/www/lemonsite/
[...]
Obviously I a2ensite both sites and reload Apache2.
When I digit lemonsite.mydomain.com on address bar of firefox, it returns Address not found.
When I digit MYIP/lemonsite, I get a 404 not found error generated by www.mydomain.com CMS.
When I digit MYIP on bar I get www.mydomain.com.
I would like to see lemonsite.
Is it possible to exclude a virtualhost from mod_security protection?
I have a server with 200+ hosting accounts, but I need to exclude one of those from mod_security protection.
What is the proper syntax to perform a redirect within the <VirtualHost:443> section of the httpd.conf file?
The issue is: I have an existing login URL path that has changed slightly. As an example, let's say the old URL is:
"https://www.something.net/item1/item2/login.jsp" but now there's a "new" name for 'item2'.
I only want a user to be automatically redirected to the "new" path, but is ONLY triggered when the "old" login URL path is entered and nothing else.
I have substituted the domain names and DocumentRoot folders for generic titles, so I will refer to those where applicable in the thread as well.
Here is my httpd-vhosts.conf:
<VirtualHost *:80>
DocumentRoot "C:WebServerwww"
</VirtualHost>
<VirtualHost *:80>
[Code] ....
Running Apache 2.2.22 on Ubuntu 12.04...Here's (in addition to default) my papertower config in sites-available: URL....
When I restart, I get this message: [URL] ....
I'm coming from Apache on Windows and trying to set up the same workflow I had there. Basically, if I placed a folder in /www/papertower/ it would become accessible via directoryname.papertower.dev after adding the host.
I'm having a strange issue getting it going again. Oddly, when I didn't have the wordpress config set up properly and went to site.papertower.dev, it would give me the "failed to connect to database" message. This made me happy, as it meant it was pointing at the right folder. Once I fixed the database config file, however, and go to site.papertower.dev, it thinks for a moment, then goes to www.site.papertower.dev and gives me a "Oops! Google Chrome could not find www.site.papertower.dev".
I double-checked that all the appropriate mods were enabled (especially rewrite), but that hasn't made a difference.
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
xxx.xxx.xxx.xxx/~user/test/index.html
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
Quote:
http://xxx.xxx.xxx.xxx/~user/test/index.html
Apache v2.2
RHEL6
UserDir configured/running
SuExec configured/running
Below is the relevant vhost block in httpd.conf:
Code:
<VirtualHost *:80>
ServerName test
ServerAlias test
DocumentRoot /home/user/public_html/test
<IfModule mod_fcgid.c>
[Code] .....
I don't have a FQDN as yet, so I just made a entry in /etc/hosts as follows:
Code:
127.0.0.1 test
Here is an excerpt from the Apache error log:
Quote:
[Mon Jun 17 12:02:16 2013] [error] [client xxx.xxx.xxx.xxx] client denied by server configuration: /home/user/public_html/test/index.html
I've checked the firewall and the /etc/hosts.allow- that's not it. I've read the Apache docs and in the vhost block Allow should be evaluated last, and apparently is matching localhost but is not matching my IP.
Does the apache virtualhost environment lower the web or apache server's security? virtualhost has no security issues.
View 3 Replies View RelatedI'm hosting wmv,wma,mp3 files, streaming of video can be done with Windows hosting, but my website script is with php.
Do you suggest Windows Server 2008 hosting or redhat linux hosting?
FTPS is not working after upgrade from plesk 11. On plesk 11 windows and linux worked fine, after upgrade my windows server, it stopped working.
Code:
PS C:Windowssystem32> & "C:Program Files (x86)ParallelsPleskadmininpmm-ras.exe" --check-repository --dump-storage=ftps://****:****@***.***.***.***:21 --debug --verbose
[2014-11-11 21:16:12.981| 4688] INFO: pmm-ras started : "C:Program Files (x86)ParallelsPleskadmininpmm-ras.exe" --check-repository "--dump-storage=ftps://****:****@***.***.***.***:21" --debug --verbose
[2014-11-11 21:16:12.997| 4688] INFO: Repository 'ftps://***.***.***.***:21': Initializing...
[code]....
Latest Update 12.0.18 Update 12 appears to have removed PHP 5.4 and PHP 5.5 from my dropdown under hosting settings.
The only PHP that is left is PHP 5.3
Yet, the updates and upgrades page still lists PHP 5.4 and PHP 5.5 as installed.
Also PHP is still working on the virtual websites that were previously enabled with either 5.4 or 5.5, but not able to change using the Plesk Panel.
Given that Parallels has broken the Panel in that latest automatic update I'd hope it can be resolved ASAP.
I can't even find any references in the KB about Plesk 12 on Windows regarding PHP versions
I can even give feedback about the broken patch as every feedback channel requires paid support.
I have faced the following ftp backup error in windows plesk 11.5.30
Transport error: unable to send directory to repository: Transport error: unable to put local file C:Program Files (x86)ParallelsPleskPrivateTemp/repo_transport_tmp_01cf171bcedd7710ackup_1401220130.zip to backup_1401220130.zip: Curl error: Failure when receiving data from the peer
Prior to using plesk, I had a few sites that had SSL certificates installed, the old fashioned way (manually through IIS). I have now setup those domains in plesk, and I need to somehow make PLESK aware of these SSL certificates.Right now, I setup the domain in plesk, give it a dedicated IP, and allow SSL connections. It chooses the default certificate and my already installed in IIS SSL certificate isnt listed.
Is there any way I can get it listed? I went to the add an SSL area, and it seems that this area is only good for generating new SSL certificates, but mine is good for another 1+ years.The bummer is that for some reason, anytime I make any type of change to the site in plesk, that it seems to overwrite the SSL bindings and changes my manual changes to the correct certificate (through iis) back to the default certificate.