I am really having trouble getting a virtualhost to work for an SSL certificate.. my browser just will not load the page..I have tried several different articles on how to setup a virtualhost and none of them seem to work.
My ssl.conf [URL] .....
*Note: I did purchase an SSL certificate - it is not self signed.
What is the proper syntax to perform a redirect within the <VirtualHost:443> section of the httpd.conf file?
The issue is: I have an existing login URL path that has changed slightly. As an example, let's say the old URL is:
"https://www.something.net/item1/item2/login.jsp" but now there's a "new" name for 'item2'.
I only want a user to be automatically redirected to the "new" path, but is ONLY triggered when the "old" login URL path is entered and nothing else.
I have substituted the domain names and DocumentRoot folders for generic titles, so I will refer to those where applicable in the thread as well.
Here is my httpd-vhosts.conf:
<VirtualHost *:80>
DocumentRoot "C:WebServerwww"
</VirtualHost>
<VirtualHost *:80>
[Code] ....
Running Apache 2.2.22 on Ubuntu 12.04...Here's (in addition to default) my papertower config in sites-available: URL....
When I restart, I get this message: [URL] ....
I'm coming from Apache on Windows and trying to set up the same workflow I had there. Basically, if I placed a folder in /www/papertower/ it would become accessible via directoryname.papertower.dev after adding the host.
I'm having a strange issue getting it going again. Oddly, when I didn't have the wordpress config set up properly and went to site.papertower.dev, it would give me the "failed to connect to database" message. This made me happy, as it meant it was pointing at the right folder. Once I fixed the database config file, however, and go to site.papertower.dev, it thinks for a moment, then goes to www.site.papertower.dev and gives me a "Oops! Google Chrome could not find www.site.papertower.dev".
I double-checked that all the appropriate mods were enabled (especially rewrite), but that hasn't made a difference.
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
xxx.xxx.xxx.xxx/~user/test/index.html
I have vhost setup for test of a new website. I want to allow access on the localhost, and, from one IP from the Internet (redacted). Apache serves the site just fine on the server but I can't access the site from my the "xxx...." IP.
I'm using a physical path to test from the public IP as follows:
Quote:
http://xxx.xxx.xxx.xxx/~user/test/index.html
Apache v2.2
RHEL6
UserDir configured/running
SuExec configured/running
Below is the relevant vhost block in httpd.conf:
Code:
<VirtualHost *:80>
ServerName test
ServerAlias test
DocumentRoot /home/user/public_html/test
<IfModule mod_fcgid.c>
[Code] .....
I don't have a FQDN as yet, so I just made a entry in /etc/hosts as follows:
Code:
127.0.0.1 test
Here is an excerpt from the Apache error log:
Quote:
[Mon Jun 17 12:02:16 2013] [error] [client xxx.xxx.xxx.xxx] client denied by server configuration: /home/user/public_html/test/index.html
I've checked the firewall and the /etc/hosts.allow- that's not it. I've read the Apache docs and in the vhost block Allow should be evaluated last, and apparently is matching localhost but is not matching my IP.
Does the apache virtualhost environment lower the web or apache server's security? virtualhost has no security issues.
View 3 Replies View RelatedI'm over here trying to rebuild php with GD in WHM, I go through the entire motion of Apache Update (with GD selected as a PHP Module) and ummmm... after it's done, I check my phpinfo() and there is no GD section, let alone has the build date been changed.
View 9 Replies View Relatedi couldn't find a more suitable category to put this post in: I am setting up a development server local to my office here, so that we can develop projects using an SVN app, but the SVN system needs SSL for logging in. i am now going round in circles where httpd.exe cannot start as a service from the apache monitor, with the following error:
The Apache service named reported the following error:
>>> httpd.exe: Could not reliably determine the server's fully qualified domain name, using 192.168.1.84 for ServerName
in the windows event viewer.
I'm using:
Windows XP Home edition, SP3
Apache 2.2.9
full computer name is devserver
workgroup is WORKGROUP
I used openssl bundled with this version of apache to generate the SSL certificate, and they all seem to be ok. When i change the line
SSLEngine on
in the httpd-ssl.conf file, the apache service starts when the SSLEngine is off, but not when the SSLEngine is on.
i have trawled the internet but not found any answer. ive checked thru httpd.conf and httpd-ssl.conf several times but i just can't see anything wrong (although im not entirely experienced!).
I've been trying to figure out some IP blocking with no success. The environment is UNIX and Apache version is 2.2.22-14.
The site is on a hosted solution and doesn't have a firewall due to the virtualization software limitations. I've tried setting something similar to the following:
Code:
<Directory /home/username/mysite.com>
#IP Blocks
Deny from 1.2.3.1/24
Deny from 1.2.4.5
etc..
but with no success. I've also tried it in the <Location> tag with no success.
The way I'm testing this is editing the conf and then bouncing the apache server.
I posted this problem in the PHP forum without a response. I thought this forum might be better.
View 0 Replies View RelatedI'm currently trying to configure apache 2 to handle subdomains. This is on a local machine (not tied to any domain names) and I'm only doing it to research how the final structure of a site 'could' be setup.
Basically I have a single install of Apache 2 running. The outcome eventually should be to have specific sub domains that all point to the same document root as the actual domain name. So eventually I will have:
http://www.mydomain.com
http://subdomain1.mydomain.com
http://subdomain2.mydomain.com
with both subdomains showing the content at mydomain.com (there is reasoning behind this but I'm not gonna go into that).
I have apache setup as follows:
NameVirtualHost *:80
<VirtualHost *:80>
ServerName daneastley
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
</VirtualHost>
<VirtualHost *:80>
ServerName subdomain1.daneastley
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
</VirtualHost>
<VirtualHost *:80>
ServerName subdomain2.daneastley
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
</VirtualHost>
Now on my local machine, only the top one works - the subdomains dont. if I add the following into my hosts file in windows, they all work:
127.0.0.1 daneastley
127.0.0.1 subdomain1.daneastley
127.0.0.1 subdomain2.daneastley
the problem being, that I wish to test this enviroment on the local network. How would I go about having every computer being able to access this? I'm assuming it comes down to DNS stuff.
have a website that sources a number of jquery plugins, when I load the site in chrome or firefox the javascript console is saying that these files were not loaded.
The server is a localhost and the files are local.
The google jquery file loads fine.
how I need to configure the apache config file to deal with javascript.
I'm running a comic site on a dedicated linux box that has weekly releases. When a new release comes out I'll typically get 4000-5000 unique hits an hour. The problems started when I set up a MySQL download logging system, that would query and display the file names when the user loads the site, and update +1 when they download a comic. Yesterday after a release, the site became very slow to access, and after about 20 seconds you'd connect and be able to browse freely at nice speeds but if you went idle you'd have to wait about 20 seconds to connect again. The other domains on the server were running fine, and I could access my whm fine as well, the server load was 0.10 or lower.
I'm assuming there's a max connection limit somewhere either on the mysql or apache side that's restricting the site from handling the load it's getting. I've poked around google and researched it a bit but couldn't really find much. I don't have an enormous amount of time to invest in this because it's just a hobby so I'd appreciate any help one of you could offer!
Virtualhosts have got me stuck, I was wondering if someone could help me out.
It seems as though no matter what I try, even though I've read over 3 tutorials I can't get virtualhosts working properly.
Basically I have the
documentroot set to /var/www/html/
I'd like to create a virtualhost (I guess name based?) which has a document root of
/var/www/userdata/
Something like this is what I'm trying to accomplish:
Code:
<VirtualHost data.jcink.com:80>
ServerAdmin bleh@bleh.net
DocumentRoot /var/www/html/userdata
ServerName data.jcink.com
</VirtualHost>
So when someone goes to data.jcink.com it loads up /userdata/. And have all the other subdomains on my site continue to stay where they are.
But every time I try to do anything like that, it doesnt work. All I'm looking for is the proper code to put in the config to get it done, and if that's possible...
I'm trying to configure name-based virtual hosting, and I'm SO close, but I've got a question...
First off, here is the relevant info from httpd.conf
Code:
#
# Use name-based virtual hosting.
#
NameVirtualHost *:80
#
# NOTE: NameVirtualHost cannot be used without a port specifier
# (e.g. :80) if mod_ssl is being used, due to the nature of the
# SSL protocol.
#
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
<VirtualHost *:80>
DocumentRoot /home/thatscri/public_html
ServerName thatscriptguy.com
<Directory "/home/thatscri/public_html">
allow from all
Options +Indexes
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot /home/thatscri/public_html
ServerName www.thatscriptguy.com
<Directory "/home/thatscri/public_html">
allow from all
Options +Indexes
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "/home/billiards/public_html"
ServerName www.billiardstalk.com
<Directory "/home/billiards/public_html">
allow from all
Options +Indexes
</Directory>
</VirtualHost>
<VirtualHost *:80>
DocumentRoot "/home/billiards/public_html"
ServerName billiardstalk.com
<Directory "/home/billiards/public_html">
allow from all
Options +Indexes
</Directory>
</VirtualHost>
1. Does that look alright? Is there anything in there that should be changed up any?
2. The only way that I could get the websites to work with www and without www was to add two virtualhosts for each site. Is there a way around this?
I'm trying to configure my ftp server (lateste proftpd) and I am stucked on virtualhosts.
I'd like to have two different domains have each their own anonymous access, but I only have one IP on my server.
As you might know, ftp does not handle the HOST field in its header as the HTTP protocol does... so I just can't seem to get it work out... I tried adding an alias IP to my main interface, it works great of course but only when I connect from my server to my server...
Currently working on debian ETCH with latest bind, mysql, proftpd and apache2
I am getting this error in apache,
[warn] VirtualHost xx.xx.xx.xxx:xx overlaps with VirtualHost xx.xx.xx.xxx:xx, the first has precedence, perhaps you need a NameVirtualHost directive
I have apache set up and it works fine from the DocumentRoot when I access the server via the IP. I've set up the following virtualhost
<VirtualHost *:80> .....
I use Debian Lenny and I would like to host 2 sites on my apache web server.
So I created two virtualhost files site1 and site2.
Site 1 configuration file:
<VirtualHost *:80>
ServerAdmin mymail@admin.com
ServerName www.mydomain.com
ServerAlias mydomain.com
DocumentRoot /var/www/premier
<Directory /var/www/peremier>
[...]
Site 2 config file:
<VirtualHost *:80>
ServerAdmin mymail@admin.com
ServerName lemonsite.mydomain.com
ServerAlias /lemonsite
DocumentRoot /var/www/lemonsite/
[...]
Obviously I a2ensite both sites and reload Apache2.
When I digit lemonsite.mydomain.com on address bar of firefox, it returns Address not found.
When I digit MYIP/lemonsite, I get a 404 not found error generated by www.mydomain.com CMS.
When I digit MYIP on bar I get www.mydomain.com.
I would like to see lemonsite.
Is it possible to exclude a virtualhost from mod_security protection?
I have a server with 200+ hosting accounts, but I need to exclude one of those from mod_security protection.
I've a problem with my Plesk 12.0.18 Panel ,I tried to login today with Admin_User for a virtual host ,but there was a problem with logging "Error: You have entered incorrect username or password."then I used the User Administrator ,and I found "No web hosting" Under the Domain Name for the workspace !!!and the icons disappeared there are only
-DNS Settings
-Mail Settings
-ODBC Data Sources
-Remove Website
I have IIS with the default site and a site i created. it appeared to be configured correctly but even from the server if i try to "browse" any of the pages i still get "internet explorer cannot display the page" from my site and "under construction" from the IIS default site.
View 7 Replies View RelatedI have a machine which runs on Desktop board with 1 LAN port built in.
I just bought a new USB-LAN and plug into the USB but I have question about how to configure it. I cannot see eth1 inside /etc/sysconfig/network-scripts, so where can I configure USB LAN?
I got dedicated server with plesk 7.8 installed on it. Can anybody tell me what to do next to add new website.
I have ip through which i can login to plesk control panel.
I want to know how can i create name servers which i will use for my domains like ns1.abc.com ns2.abc.com.
What setting i need to create by use DNS button in control panel to run my sites properly.
I am moving my servers this week and my new host doesn't do domain hosting. This is my first time doing it, I need help in pointing my domain to the new server. I just need the basic settings for A, CNAME and MX records.
View 13 Replies View Relatedhow to which will help me to make a correct configuration of mail server. I want to set up a mail server with e.g three domain names and all three domain names will have few similar email addresses like info, sales, marketing and so on. I know that this can be done by using control panels but I am not big fan of control panels I want to do a pure Linux administration using the command line.
View 6 Replies View Related