Plesk 12.x / Linux :: Unable To Trace Spam

Oct 8, 2014

My server is saturated in SPAM e-mails being sent from it, however I am struggling in tracing the root of this problem. I have now exhausted 4 IP addresses and our provider is blocking port 25 automatically on a number of occasions now.

I have used the KB article: [URL] .... to trace the highest senders of e-mail, however this has proved to be unsuccessful in finding "all" of the offending domains.

I have suspended e-mail and domains on a number of subscriptions due to the high number of e-mails being sent from the system. I have also enabled outbound mail control and set limits to 10/hr however there are domains attempting to exceed this on an hourly basis. I have investigated these subscriptions but am not able to find anything offending. Is there any feature within plesk that can show me exactly where the spam is coming from...

View 6 Replies


ADVERTISEMENT

Plesk 12.x / Linux :: Unable To Add More Than 100 Emails On Blacklist (spam)

Jul 29, 2014

Unable to add more than 100 emails on balck list [solved]

i am unable to add to add more emails on blacklist of server spam control

see the print

View 1 Replies View Related

How To Trace The Nobody Spam Mail Sent From My Sevrer?

Dec 10, 2008

How to trace the nobody spam mail sent from my sevrer?

I fond near to 15k spam mail sent from m server and bounced back.
All mails is sent by nobody. May I know how can I trave the mail is sent from which domain user? (I am using whm/cpanel)

The mail header i found from WHM is below: ....

View 4 Replies View Related

Plesk 12.x / Linux :: Unable To Install Magicspam

Oct 7, 2014

When trying to install magicspam (magicspam-plesk-1.0.8-1.1-precise64-postfix.amd64.deb) in the extensions management I get the following error: Error: Unable to install the extension: Unable to install the module package file

OSUbuntu 12.04.5 LTS
Plesk version12.0.18 Update #18, last updated at Oct 7, 2014 02:05 AM

The previous update of magicspam with version 1.0.6 worked fine. There were no changes to the system except the Plesk updates.

View 4 Replies View Related

Plesk 12.x / Linux :: Unable To Set Protection On Directories

Jul 6, 2015

After I've upgraded Plesk 1.0.18 to latest version, I'm unable to set protection on directories. Plesk say it is set, but it is not. I can access protected directory without pop-up of login-details. Old protected directories work, but for new one added not working anymore. I also tried by conventional way adding .htaccess and .htpasswd files to the directory, but it does not apply either.

View 2 Replies View Related

Plesk 11.x / Linux :: Unable To Get Webmail Password?

Jun 16, 2013

I get an error when i try to access my webmail(horde) over the i-net i get error Unable to get webmail password every time. The error appeared when i upgraded from 11.09 to 11.5. I also followed this tutorial but it didn't worked too. --> [URL] ....

View 8 Replies View Related

Plesk 12.x / Linux :: Unable To Install Joomla App

Sep 5, 2014

I have installed this several times on my server without issue and 24 hours after setting up one successfully I am no longer able to install any. Upon installation I keep getting this error message and to my knowledge nothing has been changed with the setup of the server.

Code:
Error: Installation of joomla at http://webaddress.co.uk/httpdocs failed. Non-zero exit status returned by script. Output stream: 'PHP Warning: fopen(/var/www/vhosts/webaddress.co.uk/httpdocs/httpdocs//configuration.php): failed to open stream: No such file or directory in /usr/local/psa/var/apspackages/apscataloggi4T1a.zip93a52a9b-e8bb-df/cache/scripts/file-util.php on line 15 '. Error stream: 'PHP Warning: fopen(/var/www/vhosts/webaddress.co.uk/httpdocs/httpdocs//configuration.php): failed to open stream: No such file or directory in /usr/local/psa/var/apspackages/apscataloggi4T1a.zip93a52a9b-e8bb-df/cache/scripts/file-util.php on line 15 '.

View 4 Replies View Related

Plesk 11.x / Linux :: Unable To Change Timezone (AWS)

Nov 9, 2014

We have installed our plesk servers using parallels plesk mage from AWS market place. We are unable to change the system time from default NOVT.

$ date
Mon Nov 10 13:28:25 NOVT 2014

When we tried changing time to EST from plesk tools / by linking /etc/localtime to /usr/share/zoneinfo/EST

We can see the logs are updated with the EST timings but 'date" command still shows the NOVT.

Due to this installed fail2ban is not working properly due the difference in the system time with logs time.

View 1 Replies View Related

Plesk 12.x / Linux :: Fail2ban - Unable To Disable

Sep 2, 2014

I setup and enable fail2ban by Plesk 12 (tools and settings). What happens is, few days after i am unable to access this option again. I got time out

I've tried to disable by ssh "fail2ban-client stop" and nothing... the command become loading and never conclude,

how to remove or stop fail2ban ?

View 6 Replies View Related

Plesk 12.x / Linux :: Unable To Change Subscriber

May 5, 2015

I am trying to move a particular domain to a different subscriber but am getting an error. I haven't had any problems with this function before.

Code:

Warning: Some problems were encountered when attempting to assign some of the subscriptions to a new owner.Unable to continue subscription transfer: this subscription requires more resources than can be provided by the new owner's provider.

Warning: Unable to continue subscription transfer: this subscription requires more resources than can be provided by the new owner's provider.

All of the resources it shows before and after the transfer are the same. What it is referring to?

View 3 Replies View Related

Plesk 12.x / Linux :: Unable To Create Notification

Aug 8, 2014

When i go to tools & setings -> notifications, i have this message:

Error: Unable to create notification: Unable to create Note object: Note: unable to select: no such row in the table.

View 1 Replies View Related

Plesk 12.x / Linux :: Unable To Log Into Parallels Installer

Mar 17, 2015

Tools & settings > plesk > updates & upgrades.

I tried to open updates & upgrades, with above flow, using the same username and password to log in the panel, on :8443, but the page said the username or password is not valid. attached screenshot....

View 2 Replies View Related

Plesk 11.x / Linux :: Unable To Show Some Menu

May 20, 2014

I installed plesk 12.0.18 on some servers all is running ok but in one server after update the new feature to limit outgoing mail is missing. I installed ModSecurity Web Application and is missing too.Panel is not on Power User mode

View 2 Replies View Related

Plesk 12.x / Linux :: Unable To Download Web Applications?

Feb 14, 2015

I am running Debian 7.5 and after a recent re-install of plesk and the os I am unable to download any applications. As soon as I run install wordpress or any other application the download bar just sits at zero.

View 3 Replies View Related

Trace High(ish) Linux Load

Apr 27, 2007

This is a RHEL3 box. It has a couple hundred sites, most of which are pretty quiet most of the time, lately I can't get the load below 3 most of the time. I've tried all the usual TOP PS and the rest, but I'm not seeing my problem. I've attached a text file with extended outputs. but here's what I'm seeing now from TOP and VMSTAT. I'm not sure what else I could be looking at.

I've been watching, and it seems to be Apache most of the time at the top of TOP, and I'm logging slow-queries for myslq, but there aren't many there.

top
10:02:03 up 3 days, 21:23, 2 users, load average: 2.81, 2.83, 3.05
140 processes: 137 sleeping, 2 running, 1 zombie, 0 stopped ....

View 0 Replies View Related

Plesk 12.x / Linux :: Unable To Configure Web Server On Host XXX

Jul 13, 2014

I'm getting this error ....

Code: Unable to generate the web server configuration file on the host <xxx> because of the following errors:

Template_Exception: apache2: bad user name <username>

file: /opt/psa/admin/plib/Template/Writer/Webserver/Abstract.php
line: 75
code: 0

Please resolve the errors in web server configuration templates and generate the file again.

<username> once was a user existing on the server. But I removed the user some days ago.

Since this morning I cannot reconfigure my web server. This always stops with the error message from above.

Unfortunately there is no clue, where the error could be located. The Abstract.php is crypted, so I am not able to check the where the problem is...

View 4 Replies View Related

Plesk 12.x / Linux :: Unable To Create MX Record (Route53)

Jan 2, 2015

A customer wanted me to install the Google Apps MX records. However, it seems that they are not being created in Route53, at all.

Also if I delete the existing MX reccord the change does not reflect to Route53. Try to replicate?

Fact is that you've put this module in the catalog and would get in touch with you guys to tweak it to perfection as I think it can be a real USP for small hosters like me as this utilises the power of Amazons giant network yet you only have one server to take care of for all your regular hosting.

View 2 Replies View Related

Plesk 12.x / Linux :: Unable To Find Additional PHP Versions

Jul 14, 2015

I have just installed a new Cloudlinux 6.6 Plesk 12 box but am unable to find the additional PHP versions as shown in the attached image.

I'm on update #55.

I'd prefer to use Plesk's built-in PHP versions instead of the Cloudlinux ones.

View 4 Replies View Related

Plesk 12.x / Linux :: Unable To Activate Added PHP Handler

Oct 24, 2014

I just added a new PHP Handler with PHP Verison 5.5.18 as cgi and i always get an error when activating. I used the samte setting and php ini as the Buildin Ones

root@ip1:/usr/local/src/php-5.5.18# /usr/local/psa/bin/php_handler --list
id: display name: full version: version: type: cgi-bin: php-cli: php.ini: custom:
5.5.18 5.5.18 5.5.18 5.5 cgi /usr/local/php550-cgi/bin/php-cgi /etc/php5/cli/php.ini true
cgi 5.3.29 5.3.29 5.3 cgi /usr/bin/php5-cgi /etc/php5/cgi/php.ini false
fastcgi 5.3.29 5.3.29 5.3 fastcgi /usr/bin/php5-cgi /etc/php5/cgi/php.ini false
module 5.3.29 5.3.29 5.3 module /usr/bin/php5-cgi /etc/php5/cgi/php.ini false

When i want to activate it i get

Fehler: phpinimng failed: Cannot parse php.ini: (<class 'php_ini.PhpIniSyntaxError'>, PhpIniSyntaxError('[<stdin>:24] Invalid configuration line. Are there excessive leading spaces?',))

I get this even if i want to activate a build in one.

In my additional php config i have

mail.log = /var/log/phpmail.log
mail.add_x_header = On
date.timezone = "Europe/Berlin"
[Zend]
zend_extension=/usr/lib/php/modules/ioncube_loader_lin_5.3.so
zend_extension=/usr/lib/php5/ZendGuardLoader.so
sendmail_path = /usr/sbin/sendmail-wrapper-php

I am using Debian Squeeze.

View 4 Replies View Related

Plesk 12.x / Linux :: Unable To Start Spamassassin On Server

May 23, 2015

I noticed that my spamassassin wasn't running on my server. so I restarted the service from the plesk panel but got the following message:

Error: Unable to make action: Unable to manage service by spammng: spamassassin: unrecognized service
ERROR:spammng:Unable to start SpamAssassin service
('--start', 'spamassassin')

So I SSH'ed into my machine and saw that spamassassin wasn't running.

The I reinstalled spamassassin from the "add and remove product components", but that didn't change anything. Still the same error.

View 18 Replies View Related

Plesk 12.x / Linux :: Unable To Connect To MySQL Hosts

Jul 18, 2014

After changing my web hosting (same system : VPS, same version of linux : CentOS 6 , but passage from Plesk 11 to 12), i am now unable to connect remotely via TCP-IP to my mysql databases (with third-party tools like Mysql Workbench, Toad...) ! I never met this problem before.

The only way to connect is to use a "Standard TCP-IP over SSH" connection method ... but i don't want (i did'nt need this method before) !

Though, remote connections are allowed from any host in the settings.

View 3 Replies View Related

Plesk 11.x / Linux :: Unable To Increase Upload Limit

Feb 5, 2015

I have tried the links below and it still has not made a difference to the upload limit. I am still getting a 500 error.

[URL] ,.....

In the error logs it is still saying

'mod_fcgid: HTTP request length 16777994 (so far) exceeds MaxRequestLen (16777216)'

I did not try editing last_httpd.include as it was recommended that this was not edited in the post above.

Is there something I am missing!

The Parallels version is 11.0.9 on Linux. It is a VPS package. Is it possible that the host is not allowing the increase or is it all down to my setup?

View 18 Replies View Related

Plesk 12.x / Linux :: Unable To Send Mail - Android And IOS

Mar 29, 2015

I'm running Plesk 12.0.18 update 39 on Centos 6.6 with postfix and courier-IMAP

However I can't send emails from mobile devices or outlook - the security settings are invalid, I've tried all 4, SSL, SSL/TLS Accept all certs, Start TLS etc.

View 1 Replies View Related

Plesk 11.x / Linux :: Unable To Delete Default Certificate?

Nov 20, 2014

My default certificate expired recently. I created a new certificate "default certificate 2".

I used this certificate for "Secure the Panel"

I went to "Tools and Settings" -> "IP addresses" and made this certificate the default for all the IPs. On the page "Tools and Settings" -> "SSL certificates", it says Used: 0 next to "default certificate".

But when I try to delete it, it tells me: "Error: Unable to remove certificates: one or several certificates are assigned to the IP addresses/domains."

Is there anywhere I can check where this certificate is still used?

View 3 Replies View Related

Plesk 12.x / Linux :: Unable To Find Pigz / Trying Gzip

Jun 25, 2014

I'm migrating from Plesk 9.5 (Centos 5) to Plesk 12 (Centos 6).I found this in the migration.log file: [24124]: 2014-06-25 14:27:20 DEBUG Unable to find 'pigz', trying 'gzip'

I've installed pigz from Plesk repository and I can execute pigz in the shell, but definitely Plesk Panel doesn't use pigz.I tried with pigz from EPEL repo and the log showed the same error. I also tried to move the binary from /usr/bin/pigz to /bin/pigz and It didn't work.I'm interested in using Pigz to improve the speed of migration and backup.

View 4 Replies View Related

Plesk 12.x / Linux :: Unable To Connect To Sieve Server

Aug 16, 2014

I recently upgraded to 12.0.18 and I am using Roundcube 1.0 from the panel. I read that the "Unable to connect to sieve serve" problem would be solved in version 12.It seems not. What to do?

View 12 Replies View Related

Plesk 11.x / Linux :: Unable To Send Email Notifications

Feb 4, 2015

My Plesk Panel stopped to send notifications a while ago, I don't receive mails when the backup are done, the clients can't receive their passwords if they need to reset...

The mails are not being forwarded when they configure it in the panel (I receive a mail in mail1@mydomain.com and I want it forwarded automatically to mail2@gmail.com or wherever).

I don't see nothing about the plesk panel mail in the postfix log and I don't know what else to check.

View 9 Replies View Related

Plesk 12.x / Linux :: Unable To Install Nginx Extension

Dec 22, 2014

When I try to install nginx under "Updates and Upgrades" i always get the following error report.

Code:
Installation started in background

Getting bootstrapper packages to installation list:
Following bootstrapper packages will be installed: (empty)
----------------
Getting packages to installation list:
Following packages will be installed: sw-nginx-1.6.0-1.14060313.ubuntu1404.amd64

[Code].....

I'm running Plesk 12.0.18.

View 2 Replies View Related

Plesk 12.x / Linux :: Unable To Create New Database User

Jun 22, 2015

Connection to the database server failed: Unknown column 'plugin' in 'mysql.user'

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved