Plesk 11.x / Windows :: Port 8443 Redirect From Non-SSL To SSL
Apr 25, 2013I want redirect Plesk port 8443 from non-ssl to ssl. What should I do?
I use Plesk 11 Windows.
Example: http://domain.com:8443 redirect to https://domain.com:8443
ADVERTISEMENT
Plesk 11.x / Windows :: Change Panel Default Port 8443
Jan 23, 2014I have a Windows VPS with Plesk panel. Windows Server 2008 R2 with plesk panel version 11.5.30.
I tried to change the default plesk panel port (8443) to eg (1234) without any success.
The steps i followed are the following:
1) Firewall -> Inbound rule -> allow for port 1234
2) Firewall, Disable inbound rule for port 8443
3) IIS, PleskControlPanel, Bindings: changed binding from 8443 to 1234.
Now i type on browser: [URL] .... and while its loading after some seconds redirects me to [URL] ...
Plesk 11.x / Windows :: How To Limit Access To Few IP Address To Access Port 8443 On Firewall
Aug 28, 2012How can I allow only one ip or a list of ip addresses to access port 8443.I need to limit access this port to few ip addresses and not everyone
View 6 Replies View RelatedPlesk 11.x / Linux :: Access Over Subdomain Rather Than Port 8443
Apr 29, 2015I need to access plesk 11.0 over a subdomain at port 80 rather than port 8443 as my office firewall blocks the port 8443.
I tried KB article [URL] .... but its not working.
E.g.: I would like to access plesk panel @ portal.example.com rather than @ example.com/8443or8880
I have ample of spare IPs to use it...
Plesk 11.x / Linux :: Parallel Panel Not Working On 8443 Port
Jun 18, 2014My plesk panel is not working on 8443 Port.
It is giving error like server not found.
Plesk 12.x / Linux :: CentOS 7 - 404 Not Found When Hitting Port 8443
Jun 4, 2015I have been using managed servers for all of my webhosting career. I just decided to try to do it all on my own and of course, here come the growing pains.
I went with Linode for my new hosting provider. I followed their guides to get the initial setup done, minus setting up MariaDB.
I then went ahead and installed Plesk 12. The install went off without a hitch. But, now that I try to hit my hostname:8443, I get a 404.
I have done the following in an attempt to resolve the issue:
- Restart the server
- Restart the sw-cp-server
- Remove the /etc/sw-cp-server/conf.d/agent.conf (which didn't exist)
I do have the following firewalld rules in place:
firewall-cmd --zone=public--add-port=8443/tcp --permanent
firewall-cmd --zone=public--add-port=8447/tcp --permanent
Plesk 12.x / Linux :: Disable Access For Clients Domains On Port 8443
Feb 16, 2015I was wondering if it is possible to disable plesk redirect for clients domains on port 8443.I do not not want clients to to be able to access the plesk login screen when they visit exampleclientdomain.com:8443 but obviously i still want to be able to access my control panel e.g. myprimarydomain.com:8443. Is there something i can do to prevent the sites redirecting to my primary domain or am i better creating a htaccess rule to stop/redirect traffic on port 8443 ?
View 2 Replies View RelatedPlesk 12.x / Linux :: Change Control Panel Url Port (8443 To 9859)?
Apr 9, 2015How change control panel url port (8443 to 9859)?
View 15 Replies View RelatedPlesk 12.x / Windows :: Connection Was Reset For Redirect
Jun 7, 2015I install wordPress and cant login to admin with this Address:
mydomain.com/wordpress_9/wp-login.php?redirect_to=http%3A%2F%2Fmydomain.com%2Fwordpress_9%2Fwp-admin%2F&reauth=1
And can't load
Show this error: The connection was reset
if i try this address can login > mydomain.com/wordpress_9/wp-login.php
I installed Plesk 12 on the Windows server 2012...
Plesk 11.x / Windows :: Port Forward (25 To 587)
Mar 20, 2014Portforward port 25 to 587
Plesk for Windows 11.5.30
MailEnable Professional 7.55
We are have setup smtp like this
If i telnet 587 from outside and on the server no problem all is working great !
If i try telenet 25 from outside I can not connect ! But if och do it from the server i can connect !!
It is probably something i missed, but I can not find the correct settings !
Firewall is open for 25 and 587 !
Plesk 12.x / Windows :: Cdosys Mails Cannot Use Port 465 Over SSL
Feb 6, 2015Suddenly my cdosys mails can not use port 465 over SSL......Is it related to the fact SSLv3 is disabled or something, both the client and mail servers have SSLv3 disabled...or my cdosys.dll is corrupted....
the error message is -2147220973The transport failed to connect to the server. I can telnet to port 465 of my mail server
*It appears that CDOSYS.dll does not support TLS by design. Therefore, need to find another SMTP mail compoents to replace it if using SMTPS.
Plesk 11.x / Windows :: Redirect Loop When Login Into Client Panel
Jul 24, 2014I have a problem with one of my Plesk Panels for windows (v. 11.5.30 Update #47). One of the clients is getting "Redirect loop" error when tries to login to his panel. The funny thing is that this is only happening to one account. I've tried to change subsriber for his subscription, but there was no result, since the same thing happend when I tried to login with the new subscriber's login.
View 1 Replies View RelatedPlesk 12.x / Windows :: Migration Manager - Set Non Default RDP Port
Dec 30, 2014Is it possible in migration manager set a non default RDP port?
View 1 Replies View RelatedPlesk 11.x / Windows :: How To Disable Https Port On Only One Domain
Feb 14, 2015My customer using exchange on internal office, the https port conflict with their work. how do I disable https port on their domain?
I am using plesk 11.x and I have about 300 domains on it.
Plesk 11.x / Windows :: How To Remove Port Number In Control Panel URL
Aug 12, 2013I would like to know how to change http://mydomainname.com:8880 to http://mydomainname.com/somethingelse?
View 4 Replies View RelatedRedirect 8080 Requests To 80 Port - Tomcat Problem At CPanel Server
Jan 31, 2008Yesterday I installed tomcat on a RHEL 4 + cPanel and httpd 2.0.63 server using easyapache3, process was ok, jsp pages are loading fine using http://site.com/example.jsp , but servlets, are not working using http://site.com/example, how ever, if I load http://site.com:8080/example it loads the servlet perfect.
I read something about redirecting all traffict from port 80 to 8080, but you know.. this is a shared server, and that would affect all customers on the server.
So, mod_jk seems to be the only solution, now I read many documents over the web, but no one seems to be working to configure apache2 and mod_jk that is installed using easyapache3 script.
In my httpd.conf file, i have this:
LoadModule jk_module modules/mod_jk.so
Include "/usr/local/apache/conf/jk.conf"
At jk.conf i have this content: ...
Apache :: Setup Subdomain / Virtual Host To Redirect To Specific Port And Path
Mar 13, 2013I am trying to setup a subdomain and/or virtual host to redirect to a specific port and path. I have setup my server with DDYNS through my domain name registar. Through the ddyns client I have set it to assign a subdomain of "outside.name.com" so that my server will have a easy name to get to instead of a dynamic ip address.
I have also setup on my registrars host records another subdomain of "inside.name.com" with a static IP address for internet network accessing to my server.My problem is that I have a service/program on my server that I need access to both internally and externally and this service can only be access through a port of 32400 and HTTP address of /web. (e.g. outside.name.com:32400/web or inside.name.com:32400/web)...
Is there a way that I can create a VirtualHost or Subdomain of "service.*.name.com" that redirects them to ":32400/web" of the hostname they're on? (e.g. service.outside.name.com automatically forwards or proxies--to keep it pretty--to service.outside.name.com:32400/web)
Apache :: Unable To Setup Subdomain And Virtual Host To Redirect To Port And Path
Mar 12, 2013I am trying to setup a subdomain and/or virtual host to redirect to a specific port and path. I am, however, having great difficulties doing this.
I have setup my server with DDYNS through my domain name registar.
Through the ddyns client I have set it to assign a subdomain of "outside.name.com" so that my server will have a easy name to get to instead of a dynamic ip address.
I have also setup on my registrars host records another subdomain of "inside.name.com" with a static IP address for internet network accessing to my server.
My problem is that I have a service/program on my server that I need access to both internally and externally and this service can only be access through a port of 32400 and HTTP address of /web. (e.g. outside.name.com:32400/web or inside.name.com:32400/web)
This is annoying for others to type out and I am just wanting to make it look pretty. Is there a way that I can create a VirtualHost or Subdomain of "service.*.name.com" that redirects them to ":32400/web" of the hostname they're on? (e.g. service.outside.name.com automatically forwards or proxies--to keep it pretty--to service.outside.name.com:32400/web)
Plesk 12.x / Windows :: How To Set Whole Website To Https And Redirect All Http To Https
Oct 7, 2014I´ve read that a whole https website might be better for SEO than just a mixed version. So I want to change the whole website to https.
We are using Plesk 12 on Win 2008 R2.
One Website is using DotNetNuke 7.3.2.
How can I automatically set the whole website to https?
What happens to the users that just type domainname.com without http or https.?
What is the right search engine friendly technique to permanently redirect to the https version even when the user is not using the application protocol prefix http/https?
Where can I do the setup in Plesk 12 fro Windows?
Are their any other drawbacks that I have to think over before I do the changes?
Windows Server Redirect
Dec 13, 2008I recently signed up for a new Verio Windows shared hosting account for the purpose of setting up multiple web sites for my family. At the same time, I moved 12 domain names I was holding under the new primary domain name in this hosting plan for ease of managing my accounts. The hosting plan allows up to 6 web sites to be published, and I do not plan on doing anything with the remaining domain names at this time. Here's the issue. I uploaded an index file to the primary domain name. Now, every other domain name, if entered in a web browser, brings up the index page in the primary domain name.
As I understand it, because this is a windows server, I can't use an .htaccess file to redirect all the domains I just want a placeholder for. Verio can't help me so I am looking for a relatively easy solution. Apparently, the server has a URL Rewrite (ISAPI_Rewrite 3) tool to add configurations from Apache to IIS by creating .htaccess files, but this is way over my head.
Multiple Subdomain Redirect To Windows 2003 Server
Sep 17, 2007Is it possible to send subdomain2.subdomain1.domain.com to a Windows 2003 IIS server thats different than the one where domain.com is hosted on?
View 1 Replies View RelatedPlesk Control Email Forward Not Redirect
Apr 12, 2008I can't for the life of me figure out how to forward email off this Plesk control panel to an email address outside of the domain - my customer wants his email forwarded to his blackberry using a specific email address - la_yoyager...etc..
View 5 Replies View RelatedPlesk 12.x / Linux :: How To Redirect Http To Https
Mar 25, 2015I have bought ssl certificate but if I open my site I think it is redirect to http because I dont see https. I use nginx like web server.
View 13 Replies View RelatedPlesk 12.x / Linux :: Subdomains Redirect Www Prefix
Jul 15, 2015We are starting to migrate our servers to Plesk and are building all necessary processes with the plesk xml api.
If I create a subdomain via api
Code:
<subdomain>
<add>
<parent>domain.com</parent>
<name>example</name>
<property>
<name>www_root</name>
<value>httpdocs/web/</value>
</property>
</add>
</subdomain>
The vhost configuration at apache gets this part
Code:
<IfModule mod_rewrite.c>
RewriteEngine On
RewriteCond %{HTTP_HOST} ^subdomain.domain.com$ [NC]
RewriteRule ^(.*)$ http://www.subdomain.domain.com$1 [L,R=301]
</IfModule>
So every subdomain is redirected to prefix www. But if I create the subdomain via plesk panel, the mod_rewrite isnt created, as i want. I also tried reconfigure-all, but this rewrite part is always active. I have no possibility in plesk 12.0.18 to set the setting for www prefix like at normal sites. So what can i do to prevent it and where can i change it afterwards?
Plesk Automation :: Redirect CP Login To HTTPS
Apr 28, 2014We have a new PPA installation to replace Hsphere.
One of the issues we have is most old Hsphere customers want to just go to http://cp.myppaserver.com and have it automatically redirect to https://cp.myppaserver.com:8443 as it did with Hsphere.
Ho can I achieve this with my Plesk Automation install?
Plesk 11.x / Linux :: How To Redirect HTTPS To HTTP
Jul 18, 2014how can I make a redirect traffic to the site that I have over HTTPS in HTTP? Disabling SSL 404 using Plesk 11 with nginx + php-pfm
View 2 Replies View RelatedPlesk 12.x / Linux :: Webstats Stuck In A Redirect Loop?
Mar 29, 2015I am trying to access my web stats - AWStats is the one it is configured for.
But when I click to go to web stats a popup opens that gets stuck in a redirect loop so I cannot access them.
The url is right, like this, but with my domain : [URL]
Apache :: Listen On Port 8080 For IPv4 And On Port 80 For IPv6?
Aug 8, 2013I'm runnung a server with Apache2 (Apache/2.2.16 (Debian 6.0))
I would like Apache2 listen on port 8080 for IPv4 and on port 80 for IPv6.
This is what I have now:
/etc/apache2/ports.conf