Plesk 12.x / Linux :: Passing Headers To Apache Through Nginx
Jul 23, 2014I want to pass the X-SENDFILE header to apache through nginx.
Is this possible or do i have to disable the reverse proxy?
I want to pass the X-SENDFILE header to apache through nginx.
Is this possible or do i have to disable the reverse proxy?
I maintain a server with a few domains. The server runs Plesk and Mailman. There are about 50 mailing lists with number of subscribers ranging from a couple people to a few hundred people. All work fine.
There is an additional list with around 2500 subscribers. Messages sent to this list are being received with nearly 500 identical "Received-SPF: pass" lines. Besides seeming odd, it's particularly problematic as some domains are bouncing the emails because the header is too large.
This behavior started after I upgraded from Plesk 11.x to 12.x.
The SPF lines look like this:
Received-SPF: pass (SERVER-HOSTNAME-HERE: localhost is always allowed.) client-ip=127.0.0.1; envelope-from=BOUNCE-LIST-ADDRESS-HERE; helo=SERVER-HOSTNAME-HERE;
Where SERVER-HOSTNAME-HERE is our hostname and BOUNCE-LIST-ADDRESS-HERE is the list's bounce address.
For what it's worth the server hostname and the domain of the list do not match.
This issue seems to be tied to the number of subscribers. We made a new list with a few subscribers and messages looked fine. We added the 2500 subscribers to the new list and then we saw the plentiful Received-SPF: pass entries.
I have an Apache reverse proxy set up. I have an IIS server on the backend with a site which must be HTTPS and must require client certificates (x509). It seems like the proxy is working great, but the client certificate is not getting passed along the HTTPS request from proxy to IIS. We keep getting 403.7 (Client certificate required) errors. How I can bridge the client certificate from Apache reverse proxy to IIS?
Our Apache proxy is not set up to require client certs, the IIS website is. What I would expect is that when we make a web request that goes through the proxy to the IIS server, that we would get challenged for a client cert for the IIS website (its set to require client certs like it always has) and that client cert information would be passed along the HTTPS request. We have to be able to programatically access the x509 cert through code on the IIS website, thats why we need to have the cert passed along.
My wordpress installation in plesk some times give me:
[Sun Apr 12 14:26:08 2015] [warn] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Sun Apr 12 14:26:08 2015] [error] Premature end of script headers: index.php
How I can fix? it's very random ....
I just upgraded to 12.x from 11.5, and now the messages to the mailman lists on the server are being rejected for headers being over 32K.
I finally saw this when joining the list myself to see why so many recipient servers are rejecting the mail. I see many instances of these:
Received-Spf: pass (server.mydomain.net: localhost is always allowed.) client-ip=127.0.0.1; envelope-from=thelist-bounces@clientdomain.com; helo=mail.mydomain.net;
and there's one towards the end with:
Domainkey-Signature: a=rsa-sha1; q=dns; c=nofws; s=default; d=clientdomain.com; b=RYN97cdOiqBdkm17GknWv0IMwOmsBHoK+eRaAjYey1vg6+jke2Z35Z1CFBIs/ZvrSslcc1X3kSzu/5SvHzuZVS1nB7zEPDBdr7jZ/Y3ViFccqDWNQbbFjpW9/7tVrFRssMv55gCMNnDwmgqK8WfU1vMkHwfdsuDnIkmB4OtAfqP9w=; h=Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:Received-SPF:
[Code] ....
How do I stop getting all those Received-SPF: headers prepended to the mailman list? It tags on a header that's well over 32K for a message that is less than 1K.
When I set up spamassassin to store spam in the spam folder of my mailbox, it doesn't add any X-Sapm headers nor tags the subject. All I found so far was an old thread where a plesk employee stated that it will be fixed in 'a' future version.
I am on 11.5.30 Update #47.
I have a VPS running Parallels Plesk 12.0.18 Update#36 and CentOS 6.6. I'll like to move (if it's possible uninstall complete) Apache and let Nginx to manage all the request coming from outside.
View 4 Replies View RelatedI have an issue with running of the php-scripts. It runs via Cron (as it consumes a lot of memory), after aprox. 10 minutes after the start-time of the script the following error appears in the error-log file (path - /var/www/vhosts/system/subdomain.domain.tld/logs/error_log)
[Tue Feb 17 19:46:57.003326 2015] [fcgid:warn] [pid 28629] (104)Connection reset by peer: [client XX.XXX.XXX.XXX:48450] mod_fcgid: error reading data from FastCGI server
[Tue Feb 17 19:46:57.003368 2015] [core:error] [pid 28629] [client XX.XXX.XXX.XXX:48450] End of script output before headers: Name_of_the_script.php
For a very strange reason another PHP-script, that has the same code, but just runs less arrays, and therefore consumes less memory and can be run via browser - works perfectly from both browser and the cron. The php.ini for this domain set up correctly (see the attachment)...
Today at 12.50 pm my (ubuntu 14.04.1 LTS) server running plesk 12.0.18 suddenly stopped serving websites. Any attempts to access a webpage on any vhost returned the 502 bad gateway using Nginx error messsage.When I looked at the nginx logs, I found messages like:
2014/10/30 14:48:00 [error] 3099#0: *101 connect() failed (111:
Connection refused) while connecting to upstream, client: m.m.m.m, server: , request: "GET /server-status HTTP/1.0", upstream: URL....
Restarting apache & nginx (/etc/init.d/apache2 restart & /etc/init.d/nginx restart) made no difference and I had to reboot to restore http access.
Strangely if I browsed with port 7080 specified (i.e. http://n.n.n.n:7080), this worked fine for all vhosts, so apache (which I believe is listening on this port while nginx listens on port 80) is working fine - nginx is just not able to pass stuff to it?
My current version of nginx in plesk 11.5.44 is 1.5.0 and i would like to update it to the latest stable version which is 1.6.0. However, i cannot seem to manage to do so. I tried with yum update nginx but i receive Package(s) nginx available, but not installed.
View 1 Replies View RelatedI running magento on plesk 12 and trying to configure nginx, but only home page is working and all other pages are not working with error 404.
View 6 Replies View Relatedthis is a fresh Plesk 12 installation on a Dedicated Server, on Debian 6. I haven't installed a License key yet.When i tried to run MIgration Manager, the loading was taking forever. Also, when i try to enter Webserver Configurations Troubleshooter, i get 502 Bad Gateway nginx error.In the /var/log/sw-cp-server/error_log i get this error:
Code:
2015/06/17 11:42:47 [error] 3918#0: *52 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D, server: , request: "GET /modules/configurations-troubleshooter/index.php/index/list HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/admin/module/list?context=modules"
When i try to insert a Plesk License, i also get this error:
Code:
2015/06/17 10:29:17 [error] 5643#0: *81 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D., server: , request: "POST /server/
key_upload.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/server/key_upload.php"
I followed this KB article 118757 but no luck. Also, the server resources are at the lowest usage and there is >2 TB disk space available.
My server admin already upgraded my OpenSSL to version 1.0.1m 19 Mar 2015 and he also upgraded Nginx to 1.6. I'm also running CentOS v5.11 and Plesk v11.5.
However, he tells me that he still can't get TLS 1.2 to work because he noticed that my server uses a different version of Nginx (sw-nginx), which he believes is part of Plesk. How we can get TLS 1.2 working on the Plesk copy of Nginx (sw-nginx)?
We have a problem with a magento website. Often (perhaps when we use administration), we have the message "502 Bad Gateway nginx".
We have added server instructions in Plesk Nginx:
proxy_buffers 16 16k;
proxy_buffer_size 32k;
fastcgi_buffer_size 32k;
fastcgi_buffers 16 12k;
But we have still the problem.
We have tried :
[URL] ....
And
[URL] ....
Without results...
The log file say:
[client x.x.x.x] client denied by server configuration: /var/www/vhosts/domain.com/httpdocs/app/etc/local.xml
x.x.x.x is the website IP.
Plesk 12 will not do it and if you reinstall it you get errors after installation. Maybe a bug but seems nobody is interested in answering my question before.
I tried to remove by
apt-get remove --purge sw-nginx
dpkg -r sw-ningx
Both of them display that is removed but after a new installation are the folders not created and maybe old files not overwritten if not deleted.
I wanted to activate nginx on my server als describes on [URL] ...
Installing was no problem, but when i try to enable nginx, I always get errors:
/usr/local/psa/admin/sbin/nginxmng -e
[2015-05-20 10:42:36] ERR [util_exec] proc_close() failed
Error occured while sending feedback. HTTP code returned: 502
[2015-05-20 10:42:37] ERR [util_exec] proc_close() failed
[Code] ....
Is here a tutorial special for plesk 12 that show me how set nginx to show real visitor ip in access_log and php?
Actual nginx show for IPv6 visitors the own server IPv6 in access_log and php.
how is it possible that after an update my main site is down? This site: www.orderhosting.it has plesk Panel and I have 20 sites. They work perfectly but my main site is off. I think there is an error in the configuration because:
[root@orderhosting ~]# grep -r 199.99.36.73 /etc/nginx/
[root@orderhosting ~]#
This is strange.Error log does not report any errors, only this: [warn] RSA server certificate CommonName (CN) `Parallels Panel' does NOT match server name!?
how to change ports of Nginx from 80 to 8080 I would like install Varnish
View 2 Replies View RelatedI have upgraded from 10 to 12 and now I have "502 Bad Gateway nginx" error. I have atached logas..
View 1 Replies View Relatedi went to server setting and checked manage php with nginx then start getting 404 Not Found nginx. It was clear that it s a problem with the wordpress permanent links so i went in wordpress back-end and switched to default links then it start working but when i switched to permanent link againi got the previous error again
I searched for a while on internet and i found . URL.... So the problem that i have is that i added this piece of code manually in : /var/www/vhosts/system/domaine.com/conf/nginx.conf....Since it s mentioned above
#ATTENTION!
#
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED.
I have a server with the latest version of plesk and centos.
The main site is Articoli Promozionali
Until now kept on the server active both apache and nginx.
Tonight I tried to disable apache leaving only nginx.
That raises the error: 502 bad gateway NGINX at all sites on that server.
To use nginx i need to keep active apache?
What can cause that error?
I am trying to add the following nginx configuration to Plesk through
Website & Domains -> Web Server Settings
The conf i am adding is:
location /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
or
location ^~ /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
but it doesn't seem to be working.
gives 404
I have installed the nginx on my server and want to activate it for all my domains, to do this, i have to do it manually for each domains. But there should be an easier way. Apache uses too much ram.
View 7 Replies View RelatedI have a problem with Nginx on myPlesk 12 with wildcard dns.I want subdomains URl to be like root domain url. Exemple. URL...You can see a live exemple here: URL.... give error 404 instead of showing root domain file (URL....). It's the same for images.What specific rule I must add in plesk panel?
View 5 Replies View RelatedUsing Plesk 12 on a VPS with Ubuntu 12.04 LTS. In the Web Server Settings, if I select "Process PHP by nginx", then the URL "<domain>/plesk-stat/webstat/" is answered by Nginx with "404 Not Found". Having sniffed around, it seems:
/var/www/vhosts/system/VHOST/statistics/webstat is getting statistics gathered.I can't say if they are complete, or even sensible, but things are happening there.The various Alias and other statements required for access to AWStats via Apache are contained in the Apache config file /var/www /vhosts/system/VHOST/conf/last_httpd.conf..But no equivalent statements are generated in /var/www/vhosts/system/VHOST/conf/last_nginx.conf.
i have installed today Reverse Proxy Nginx on Plesk 12. After have activing Nginx, website show "no data received".
Nginx error.log:
PHP: no "ssl_certificate" is defined in server listening on SSL port while SSL handshaking-----conflicting server name
When I reboot my centOS 6.5 + Plesk 11.5 server, Nginx doesn't start and every time I need to go to Server > IP Addresses and click Reread IP.Then Plesk says that need to repair one of these ips, I click repair and then Nginx can start. ( I have 3 ips [2 ipv4 and 1 ipv6] )
View 3 Replies View RelatedAs the title says: How do I switch to NGINX only as my web server, while disabling/removing apache in Plesk?
View 2 Replies View RelatedI need changing the nginx port. I've followed various threads and have created a custom nginxDomainVirtualHost.php file at: /usr/local/psa/admin/conf/templates/custom/domain, while the website indeed moves to the port I have set, a second nginx thread starts at port 80 and takes over in it's place.
I need to put varnish at port 80 and cannot do so until all services relinquish control on port 80.
Followed clues here: [URL] ....
some here: [URL] .....
Turn's out to be able to change the nginx port to a non-standard port you need to edit 6 files
nginx.php
nginxDomainForwarding.php
nginxDomainForwardingIpDefault.php
nginxDomainVhost.php
nginxDomainVhostIpDefault.php
nginxWebmail.php
For the time being i disabled SSL support for my test domain as I didn't need it. The line you need to look for the in above files is:
Code:
$VAR->server->nginx->httpPort
So the line would finally become from this:
Code:
<?php echo $VAR->includeTemplate('server/nginxVhosts.php', array(
'ssl' => false,
'frontendPort' => $VAR->server->nginx->httpPort,
'backendPort' => $VAR->server->webserver->httpPort,
)) ?>
to this:
Code:
<?php echo $VAR->includeTemplate('server/nginxVhosts.php', array(
'ssl' => false,
'frontendPort' => "8888",
'backendPort' => $VAR->server->webserver->httpPort,
)) ?>
To get this to work you'll need to create a custom directory at: /usr/local/psa/admin/conf/templates
And copy the files over from the root of /usr/local/psa/admin/conf/templates/default
i've set up a new Debian 7 server with Plesk 12. After the basic configuration, i've installed nginx via Plesk updater.Now, when restarting the whole server, nginx doesnt start for some reason. Plesk shows it as running, but `service nginx status` shows, that it isnt running. But an `nginx.pid` exists in /var/run, but it's empty.
However, starting it manually via `service nginx start` works fine without any error.I've already tried `update-rc.d nginx remove && update-rc.d nginx defaults` but without any success. I've also tried another init script, but same results.