My server admin already upgraded my OpenSSL to version 1.0.1m 19 Mar 2015 and he also upgraded Nginx to 1.6. I'm also running CentOS v5.11 and Plesk v11.5.
However, he tells me that he still can't get TLS 1.2 to work because he noticed that my server uses a different version of Nginx (sw-nginx), which he believes is part of Plesk. How we can get TLS 1.2 working on the Plesk copy of Nginx (sw-nginx)?
I renewed an SSL cert for one of my servers. After several hours, then days I noticed that the date had not updated to show the new expiration date.
When I do an ssl check through [URL] it shows the following when scanning https://webhost1.teksavvy.com:8443:
Valid from: 2014-Apr-11 00:00:00 GMT
Valid to: 2015-Apr-11 23:59:59 GMT
When scanning https://webhost1.teksavvy.com it shows:
[Code]....
We have change IP from NS server in Plesk.Why can we force refresh named.conf (for all domains) ? Informations stay with old IP.We can force one domain when we change an information in the DNS and we validate. But Hown can we change all domains?
Example:
Old
> NS server1.com (x.x.x.1)
New
> NS server1.com (x.x.x.2)
[code]....
I am running
OS Ubuntu 14.04.1 LTS
Plesk version 12.0.18 Update #34, last updated at Feb 10, 2015 01:52 AM
I have created a few websites using plesk and i have the dns acting as the primary . This server acts as a primary nameserver for the DNS zone mywebsite.co.uk
When i add a txt record the dns is updated but it never resolves so my DKIM and SPF records are never found. I have checked my syntax for the records and all are fine. My domains are hosted by stratoservers. Is it there fault or mine. Should i change providers so i have more access to the domains dns or should plesk be doing that for me...
I already posted this as a bug report and now wanted to inform other users.
Starting with Plesk 11.5, the file "/opt/psa/var/modules/firewall/firewall-emergency.sh" contains the following line:
Code:
rm -f /opt/psa/var/modules/firewall/active.flag
That line stems from updating
Code:
Preparing to replace psa-firewall 11.0.9-debian6.0.build110120608.16 (using .../psa-firewall_11.5.30-debian6.0.build115130819.13_amd64.deb) ...
Unpacking replacement psa-firewall ...
Now, when you stop the firewall, you cannot start it again, cause deleting the active.flag disables the firewall:
Code:
# ll /opt/psa/var/modules/firewall/active.flag
-rw-r--r-- 1 root root 0 2013-11-26 09:22 /opt/psa/var/modules/firewall/active.flag
# /etc/init.d/psa-firewall stop
psa-firewall: firewall successfully disabled
# ll /opt/psa/var/modules/firewall/active.flag
ls: cannot access /opt/psa/var/modules/firewall/active.flag: No such file or directory
# /etc/init.d/psa-firewall start
psa-firewall: service is disabled
You then have to manually "touch" the active.flag to be able to start the firewall again. A workaround is to remove the line:
Code:
sed -i 's:rm -f /opt/psa/var/modules/firewall/active.flag::' /opt/psa/var/modules/firewall/firewall-emergency.sh'
I really hope that Parallels fixes this asap, as normally you won't notice that the firewall is not active when every works fine (nothing is blocked) and Plesk still shows all the rules.
My license is updated every month, however it is not automatic, i have to go to Tools & settings > license management and click on "Retrieve Keys" every month.
Iguess there should a cron job that should do this for me every month in Centos.
What this cron job should be ?
When I first installed Plesk on my VPS I had a diskspace of 100GB.
After that I upgraded my VOS I had a diskspace with 150GB of storage.
When I read my statistics, plesk only recognizes 100GB in stead of 150.
How could I update these statistics?
How to update out of date components included in VPS? For instance...
rkhunter is at v1.3.4 whereas the current version is 1.4.2. Why both about updating? Well, in part to reduce the number of false-positive warnings and in part to gain more current protection.
A yum update isn't possible as 1.4.x has moved on quite significantly from 1.3.x and while downloading and installing rkhunter isn't terrible difficult, trying to get it to update the 1.3.4 version included with VPS seems somewhat more difficult...
SpamAssassin is at v3.3.1-3 whereas 3.4.0 is the current release version and 3.3.2 is no longer supported, meaning 3.3.1 is definately way out of support. Why bother? Better spam detection and blocking
When VPS will update to something nearer current versions of both of these components?
I'd like to upgrade my server from Ubuntu 12.04 to Ubuntu 14.04. The idea is to migrate my actual server (S1) to another one (S2). Then, format and install ubuntu 14.04 with Plesk on S1, and finally migrate the data from S2 to S1. Is it a good solution? Is it possible to do this using only one server? I don't know if I can do it making a backup, install Ubuntu 14.04 and then, restore the data into the server.
However, I have a problem with the migration agent. When I go the migration page, the migration agent tries to update itself and it keep at 0% forever (I attach an screenshot).
The IP addresses assigned to our servers have changed so it's time to update the default SPF information contained in the DNS records for ALL of the domains hosted on our servers:
OLD
Code:
v=spf1 +ip4:173.236.23.185 +ip4:173.236.23.188/30 +a +mx -all
NEW
Code:
v=spf1 +ip4:69.160.255.188/30 +ip4:69.160.255.192 +a +mx -all
However, when we update the resource record in the DNS template and then "Apply the changes to all zones...",
Panel will apply changes from the template to all DNS zones including the customized ones. Note that user-modified records always remain intact. For example, if the template contains a new record that was already added by a customer, Panel will keep the customer's record.Click to expand...
I found out a easy way to update the Database name of a WP installation through phpmyadmin panel, However I can't seem to update or refresh the Parallels WP Settings with correct information. Is this a bug?
This is how to reproduce:
From phpMyAdmin select the database you want to select, in the tabs there's one called Operations, Go to the rename section.
Update the user privileges to the new Database name and remove the old privileges (save)
Then manually update the wp-config file which contains the 'Database name' (save)
Then goto Parallels Plesk > Websites & Domains> WordPress Installations > Change Settings
Here you should notice the Change Settings for the WordPress Installation still contains the old Database name.
Is there any way of updating this?
Today at 12.50 pm my (ubuntu 14.04.1 LTS) server running plesk 12.0.18 suddenly stopped serving websites. Any attempts to access a webpage on any vhost returned the 502 bad gateway using Nginx error messsage.When I looked at the nginx logs, I found messages like:
2014/10/30 14:48:00 [error] 3099#0: *101 connect() failed (111:
Connection refused) while connecting to upstream, client: m.m.m.m, server: , request: "GET /server-status HTTP/1.0", upstream: URL....
Restarting apache & nginx (/etc/init.d/apache2 restart & /etc/init.d/nginx restart) made no difference and I had to reboot to restore http access.
Strangely if I browsed with port 7080 specified (i.e. http://n.n.n.n:7080), this worked fine for all vhosts, so apache (which I believe is listening on this port while nginx listens on port 80) is working fine - nginx is just not able to pass stuff to it?
My current version of nginx in plesk 11.5.44 is 1.5.0 and i would like to update it to the latest stable version which is 1.6.0. However, i cannot seem to manage to do so. I tried with yum update nginx but i receive Package(s) nginx available, but not installed.
View 1 Replies View RelatedI running magento on plesk 12 and trying to configure nginx, but only home page is working and all other pages are not working with error 404.
View 6 Replies View Relatedthis is a fresh Plesk 12 installation on a Dedicated Server, on Debian 6. I haven't installed a License key yet.When i tried to run MIgration Manager, the loading was taking forever. Also, when i try to enter Webserver Configurations Troubleshooter, i get 502 Bad Gateway nginx error.In the /var/log/sw-cp-server/error_log i get this error:
Code:
2015/06/17 11:42:47 [error] 3918#0: *52 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D, server: , request: "GET /modules/configurations-troubleshooter/index.php/index/list HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/admin/module/list?context=modules"
When i try to insert a Plesk License, i also get this error:
Code:
2015/06/17 10:29:17 [error] 5643#0: *81 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D., server: , request: "POST /server/
key_upload.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/server/key_upload.php"
I followed this KB article 118757 but no luck. Also, the server resources are at the lowest usage and there is >2 TB disk space available.
We have a problem with a magento website. Often (perhaps when we use administration), we have the message "502 Bad Gateway nginx".
We have added server instructions in Plesk Nginx:
proxy_buffers 16 16k;
proxy_buffer_size 32k;
fastcgi_buffer_size 32k;
fastcgi_buffers 16 12k;
But we have still the problem.
We have tried :
[URL] ....
And
[URL] ....
Without results...
The log file say:
[client x.x.x.x] client denied by server configuration: /var/www/vhosts/domain.com/httpdocs/app/etc/local.xml
x.x.x.x is the website IP.
Plesk 12 will not do it and if you reinstall it you get errors after installation. Maybe a bug but seems nobody is interested in answering my question before.
I tried to remove by
apt-get remove --purge sw-nginx
dpkg -r sw-ningx
Both of them display that is removed but after a new installation are the folders not created and maybe old files not overwritten if not deleted.
I wanted to activate nginx on my server als describes on [URL] ...
Installing was no problem, but when i try to enable nginx, I always get errors:
/usr/local/psa/admin/sbin/nginxmng -e
[2015-05-20 10:42:36] ERR [util_exec] proc_close() failed
Error occured while sending feedback. HTTP code returned: 502
[2015-05-20 10:42:37] ERR [util_exec] proc_close() failed
[Code] ....
Is here a tutorial special for plesk 12 that show me how set nginx to show real visitor ip in access_log and php?
Actual nginx show for IPv6 visitors the own server IPv6 in access_log and php.
how is it possible that after an update my main site is down? This site: www.orderhosting.it has plesk Panel and I have 20 sites. They work perfectly but my main site is off. I think there is an error in the configuration because:
[root@orderhosting ~]# grep -r 199.99.36.73 /etc/nginx/
[root@orderhosting ~]#
This is strange.Error log does not report any errors, only this: [warn] RSA server certificate CommonName (CN) `Parallels Panel' does NOT match server name!?
how to change ports of Nginx from 80 to 8080 I would like install Varnish
View 2 Replies View RelatedI have upgraded from 10 to 12 and now I have "502 Bad Gateway nginx" error. I have atached logas..
View 1 Replies View Relatedi went to server setting and checked manage php with nginx then start getting 404 Not Found nginx. It was clear that it s a problem with the wordpress permanent links so i went in wordpress back-end and switched to default links then it start working but when i switched to permanent link againi got the previous error again
I searched for a while on internet and i found . URL.... So the problem that i have is that i added this piece of code manually in : /var/www/vhosts/system/domaine.com/conf/nginx.conf....Since it s mentioned above
#ATTENTION!
#
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED.
I have a server with the latest version of plesk and centos.
The main site is Articoli Promozionali
Until now kept on the server active both apache and nginx.
Tonight I tried to disable apache leaving only nginx.
That raises the error: 502 bad gateway NGINX at all sites on that server.
To use nginx i need to keep active apache?
What can cause that error?
I am trying to add the following nginx configuration to Plesk through
Website & Domains -> Web Server Settings
The conf i am adding is:
location /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
or
location ^~ /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
but it doesn't seem to be working.
gives 404
I have installed the nginx on my server and want to activate it for all my domains, to do this, i have to do it manually for each domains. But there should be an easier way. Apache uses too much ram.
View 7 Replies View RelatedI have a problem with Nginx on myPlesk 12 with wildcard dns.I want subdomains URl to be like root domain url. Exemple. URL...You can see a live exemple here: URL.... give error 404 instead of showing root domain file (URL....). It's the same for images.What specific rule I must add in plesk panel?
View 5 Replies View RelatedUsing Plesk 12 on a VPS with Ubuntu 12.04 LTS. In the Web Server Settings, if I select "Process PHP by nginx", then the URL "<domain>/plesk-stat/webstat/" is answered by Nginx with "404 Not Found". Having sniffed around, it seems:
/var/www/vhosts/system/VHOST/statistics/webstat is getting statistics gathered.I can't say if they are complete, or even sensible, but things are happening there.The various Alias and other statements required for access to AWStats via Apache are contained in the Apache config file /var/www /vhosts/system/VHOST/conf/last_httpd.conf..But no equivalent statements are generated in /var/www/vhosts/system/VHOST/conf/last_nginx.conf.
i have installed today Reverse Proxy Nginx on Plesk 12. After have activing Nginx, website show "no data received".
Nginx error.log:
PHP: no "ssl_certificate" is defined in server listening on SSL port while SSL handshaking-----conflicting server name
When I reboot my centOS 6.5 + Plesk 11.5 server, Nginx doesn't start and every time I need to go to Server > IP Addresses and click Reread IP.Then Plesk says that need to repair one of these ips, I click repair and then Nginx can start. ( I have 3 ips [2 ipv4 and 1 ipv6] )
View 3 Replies View RelatedAs the title says: How do I switch to NGINX only as my web server, while disabling/removing apache in Plesk?
View 2 Replies View Related