I have a problem with Nginx on myPlesk 12 with wildcard dns.I want subdomains URl to be like root domain url. Exemple. URL...You can see a live exemple here: URL.... give error 404 instead of showing root domain file (URL....). It's the same for images.What specific rule I must add in plesk panel?
View 5 RepliesI have a new Plesk 12 installation. I have configured a domain (example.com) with hosting that also requires wildcard subdomains.
To achieve this I had to create a vhost.conf file with...
ServerAlias *.example.com
This works and I can go to http://anything.example.com with no issue.
I purchased a wildcard SSL certificate for *.example.com and successfully installed it.
If I go to https://example.com it works perfectly and shows the correct certificate, however if I go to https://anything.example.com it tells me the connection is untrusted, when I view the certificate, it shows the Parallels Plesk self certified certificate and not my purchased certificate.
I created a vhost_ssl.conf with
ServerAlias *.example.com
ServerAlias *.example.com:443 #tried with and without this line
If I add an exception in the browser, then I am taken to the correct place, albeit with the incorrect certificate.
Of course I have executed httpdmng --reconfigure-domain example.com and also tried a full reboot.
In summary:
http://example.com - works
http://anything.example.com - works
https://example.com works with my certificate
https://anything.example.com has Parallels certificate but routes to correct page
I am running a CentOS 6.5, 64-bit server with Plesk 12.0.18, and need to install a wildcard SSL for one of the domains/sub domains hosted on this server.
So you have the csr and private key installed (and domain.crt?), you just need to open..
1. COMODORSAAddTrustCA
2. COMODORSADomainValidationSecureServerCA
On your desktop and combine the two files into a new intermediate.crt file and upload that as the CA File.
But I'm not sure why you can't add it as text.
Click to expand...
Click for original message
We're running Plesk 11.5 on a CentOS 6.5 VPS and we would like to resolve the following problem:
We've configured a physical subdomain, lets say sub1.mydomain.com, and set up a couple of aliases for that domain in Plesk under:
Web Server Settings for sub1.mydomain.com > Additional Apache directives > "Additional directives for HTTP"
Code:
ServerAlias mysub1.mydomain.com
ServerAlias mysub2.mydomain.com
And
Web Server Settings for sub1.mydomain.com > Additional Apache directives > "Additional directives for HTTPS"
Code:
ServerAlias mysub1.mydomain.com
ServerAlias mysub2.mydomain.com
This config is working fine until we try to load resources from the alias over ssl, I believe something is missing in the Nginx config. I'm not getting any info using the logs.
For example:
http://sub1.mydomain.com/img/myimage.jpg --> works!
https://sub1.mydomain.com/img/myimage.jpg --> works!
http://mysub1.mydomain.com/img/myimage.jpg --> works!
http://mysub1.mydomain.com/img/myimage.jpg --> not loading
http://mysub2.mydomain.com/img/myimage.jpg --> works!
http://mysub1.mydomain.com/img/myimage.jpg --> not loading
Do we need to specify alternative directives for Nginx?
I want to use wildcard subdomain
This is what I should do for my job
now how can I do it?
I use LXADMIN and lighttpd
lighttpd support .httaccess? how can I enable it?
I want to wild card subdomain redirection
I want to like this when anyone type *.mydomain.com to will redirect to
[url]
how can i do this.
I have create A record for *.mydomain.com and also add in serveralias www.mydoamin.com mydomain.com *.mydomain.com
There is a client needs to free to provide free subdomain, what are the settings need be done in dns zone and httpd.conf file?
View 1 Replies View RelatedI want to run a script that will loop through all of the domains on a particular server and remove all MX records with mail.*.I am testing on a single test domain at the moment but I'm not sure how to do the wildcard./usr/local/psa/bin/dns -d example.com -mx '' -mailexchanger mail.*
The following example command is from: URL....To add an MX resource record mail3.example.com specifying domain name mail.example.com as the mail exchanger for the record, and setting the mail exchanger's priority to the DNS zone on the domain example.com to 15:
# ./dns -a example.com -mx mail3 -mailexchanger mail.example.com -priority 15..What does the mail3.example.com got to do with it? Isn't it just adding a MX record mail.example.com?
System: Plesk Panel 12, updated on CentOS 6
Situation:
"Main-domain" domain with 2 "alias-domains" (301-forward). For "Main-domain" I created a wildcard subdomain. All works fine.
ToDo:
I want to create wildcard domains for both "alias-domains".
Problem:
It is not possible to create wildcard subdomains for both "alias-domains".
1. How to create wildcard-subdomains on "alias-domains"?
2. How do I disable Plesk to respond to every domain, which isnt covered by a wildcard?
I have several domains configured in my Plesk, and one of them is set as the "Detault site" under Home >> Tools & Setings > IP address management.This has the unpleasant side effect that any domain I point to this IP renders content from the Default site unless it's setup. How can I configure the default site to render content from only one domain?
View 1 Replies View Related"Unable to set the certificate: Invalid certificate format." when i enter my key..
How can i fix this problem?
Today at 12.50 pm my (ubuntu 14.04.1 LTS) server running plesk 12.0.18 suddenly stopped serving websites. Any attempts to access a webpage on any vhost returned the 502 bad gateway using Nginx error messsage.When I looked at the nginx logs, I found messages like:
2014/10/30 14:48:00 [error] 3099#0: *101 connect() failed (111:
Connection refused) while connecting to upstream, client: m.m.m.m, server: , request: "GET /server-status HTTP/1.0", upstream: URL....
Restarting apache & nginx (/etc/init.d/apache2 restart & /etc/init.d/nginx restart) made no difference and I had to reboot to restore http access.
Strangely if I browsed with port 7080 specified (i.e. http://n.n.n.n:7080), this worked fine for all vhosts, so apache (which I believe is listening on this port while nginx listens on port 80) is working fine - nginx is just not able to pass stuff to it?
My current version of nginx in plesk 11.5.44 is 1.5.0 and i would like to update it to the latest stable version which is 1.6.0. However, i cannot seem to manage to do so. I tried with yum update nginx but i receive Package(s) nginx available, but not installed.
View 1 Replies View RelatedI running magento on plesk 12 and trying to configure nginx, but only home page is working and all other pages are not working with error 404.
View 6 Replies View Relatedthis is a fresh Plesk 12 installation on a Dedicated Server, on Debian 6. I haven't installed a License key yet.When i tried to run MIgration Manager, the loading was taking forever. Also, when i try to enter Webserver Configurations Troubleshooter, i get 502 Bad Gateway nginx error.In the /var/log/sw-cp-server/error_log i get this error:
Code:
2015/06/17 11:42:47 [error] 3918#0: *52 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D, server: , request: "GET /modules/configurations-troubleshooter/index.php/index/list HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/admin/module/list?context=modules"
When i try to insert a Plesk License, i also get this error:
Code:
2015/06/17 10:29:17 [error] 5643#0: *81 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D., server: , request: "POST /server/
key_upload.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/server/key_upload.php"
I followed this KB article 118757 but no luck. Also, the server resources are at the lowest usage and there is >2 TB disk space available.
My server admin already upgraded my OpenSSL to version 1.0.1m 19 Mar 2015 and he also upgraded Nginx to 1.6. I'm also running CentOS v5.11 and Plesk v11.5.
However, he tells me that he still can't get TLS 1.2 to work because he noticed that my server uses a different version of Nginx (sw-nginx), which he believes is part of Plesk. How we can get TLS 1.2 working on the Plesk copy of Nginx (sw-nginx)?
We have a problem with a magento website. Often (perhaps when we use administration), we have the message "502 Bad Gateway nginx".
We have added server instructions in Plesk Nginx:
proxy_buffers 16 16k;
proxy_buffer_size 32k;
fastcgi_buffer_size 32k;
fastcgi_buffers 16 12k;
But we have still the problem.
We have tried :
[URL] ....
And
[URL] ....
Without results...
The log file say:
[client x.x.x.x] client denied by server configuration: /var/www/vhosts/domain.com/httpdocs/app/etc/local.xml
x.x.x.x is the website IP.
Plesk 12 will not do it and if you reinstall it you get errors after installation. Maybe a bug but seems nobody is interested in answering my question before.
I tried to remove by
apt-get remove --purge sw-nginx
dpkg -r sw-ningx
Both of them display that is removed but after a new installation are the folders not created and maybe old files not overwritten if not deleted.
I wanted to activate nginx on my server als describes on [URL] ...
Installing was no problem, but when i try to enable nginx, I always get errors:
/usr/local/psa/admin/sbin/nginxmng -e
[2015-05-20 10:42:36] ERR [util_exec] proc_close() failed
Error occured while sending feedback. HTTP code returned: 502
[2015-05-20 10:42:37] ERR [util_exec] proc_close() failed
[Code] ....
Is here a tutorial special for plesk 12 that show me how set nginx to show real visitor ip in access_log and php?
Actual nginx show for IPv6 visitors the own server IPv6 in access_log and php.
how is it possible that after an update my main site is down? This site: www.orderhosting.it has plesk Panel and I have 20 sites. They work perfectly but my main site is off. I think there is an error in the configuration because:
[root@orderhosting ~]# grep -r 199.99.36.73 /etc/nginx/
[root@orderhosting ~]#
This is strange.Error log does not report any errors, only this: [warn] RSA server certificate CommonName (CN) `Parallels Panel' does NOT match server name!?
how to change ports of Nginx from 80 to 8080 I would like install Varnish
View 2 Replies View RelatedI have upgraded from 10 to 12 and now I have "502 Bad Gateway nginx" error. I have atached logas..
View 1 Replies View Relatedi went to server setting and checked manage php with nginx then start getting 404 Not Found nginx. It was clear that it s a problem with the wordpress permanent links so i went in wordpress back-end and switched to default links then it start working but when i switched to permanent link againi got the previous error again
I searched for a while on internet and i found . URL.... So the problem that i have is that i added this piece of code manually in : /var/www/vhosts/system/domaine.com/conf/nginx.conf....Since it s mentioned above
#ATTENTION!
#
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED.
I have a server with the latest version of plesk and centos.
The main site is Articoli Promozionali
Until now kept on the server active both apache and nginx.
Tonight I tried to disable apache leaving only nginx.
That raises the error: 502 bad gateway NGINX at all sites on that server.
To use nginx i need to keep active apache?
What can cause that error?
I am trying to add the following nginx configuration to Plesk through
Website & Domains -> Web Server Settings
The conf i am adding is:
location /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
or
location ^~ /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
but it doesn't seem to be working.
gives 404
I have installed the nginx on my server and want to activate it for all my domains, to do this, i have to do it manually for each domains. But there should be an easier way. Apache uses too much ram.
View 7 Replies View RelatedUsing Plesk 12 on a VPS with Ubuntu 12.04 LTS. In the Web Server Settings, if I select "Process PHP by nginx", then the URL "<domain>/plesk-stat/webstat/" is answered by Nginx with "404 Not Found". Having sniffed around, it seems:
/var/www/vhosts/system/VHOST/statistics/webstat is getting statistics gathered.I can't say if they are complete, or even sensible, but things are happening there.The various Alias and other statements required for access to AWStats via Apache are contained in the Apache config file /var/www /vhosts/system/VHOST/conf/last_httpd.conf..But no equivalent statements are generated in /var/www/vhosts/system/VHOST/conf/last_nginx.conf.
i have installed today Reverse Proxy Nginx on Plesk 12. After have activing Nginx, website show "no data received".
Nginx error.log:
PHP: no "ssl_certificate" is defined in server listening on SSL port while SSL handshaking-----conflicting server name
When I reboot my centOS 6.5 + Plesk 11.5 server, Nginx doesn't start and every time I need to go to Server > IP Addresses and click Reread IP.Then Plesk says that need to repair one of these ips, I click repair and then Nginx can start. ( I have 3 ips [2 ipv4 and 1 ipv6] )
View 3 Replies View RelatedAs the title says: How do I switch to NGINX only as my web server, while disabling/removing apache in Plesk?
View 2 Replies View Related