I'm running Plesk 12. I install it today, using the ISO which parallels provides, which includes centos 6.5 and preinstalled Plesk 12 in my vps. Then I logged in plesk, and I did everything it wants. Then I upgraded my php, to php 5.4.36 according to the manual that Paralells provides, and then I tried to increase the max upload file size for phpmyadmin. I have edited my /usr/local/psa/admin/conf/php.ini file and tried to restart using with 3 different ways using terminal:
1st: service sw-cp-server restart 2st: /etc/init.d/psa stop /etc/init.d/psa start 3st: reboot (which rebooted all the vps)
My php.ini file is:
short_open_tag = On y2k_compliance = Off output_buffering = Off max_execution_time = 600 max_input_time = 600 memory_limit = 256M max_file_uploads = 99999 max_input_vars = 2000
However, when I'm trying to import a 31mb sql file, I always get that error, and only some of my tables are being imported:
#1153 - Got a packet bigger than 'max_allowed_packet' bytes
Description: On prior versions of Plesk, users could attach Microsoft Office (word, excel, etc) files to messages they are composing in Horde, and then, before sending, click on those attachments to view them to make sure they are correct. After upgrading to 11.5, the following error is shown in Horde instead:
"Fatal error has occured could not display attachment. Details had been logged for the administrator."This issue does not occur with other file types, such as a PDF or text file.Steps to reproduce: Install Plesk 11.5 on Centos 6 x64, create an email in Horde, attach a Word document, before sending, try to view the document.
ACTUAL RESULT: Fatal error has occured could not display attachment. Details had been logged for the administrator.
I'm trying to perform SSO to my application. for my login i get an error "Size of a request header field exceeds server limit". I believe the header size got increased then the limit set in apache server. I'm guessing so.
the flow of request: Apache -> tomcat -> SAP Business Objects.
For my colleagues login the SSO works fine with out issue.
So, how to increase the HTTP header size. I'm bridging apache and tomcat using AJP connector. below is the AJP connector parameters in server.xml
why, or when this happened, but all of a sudden the PHP Memory Limit for all of my domains is 64M? I used to have it set to 128. How to change this setting so that all domains have the ability to go to 128M ?
I installed Roundcube in Plesk 12 through the link: URL....But it doesn't work. I adjusted the mailsettings for a domain to use Roundcube. With the fresh created emailaccount and you click on the webmailicon, it loads the following url but the page does not exists: URL....Aren't there any instructions for using RoundCube with Plesk? After adding Roundcube as an component are there more steps involved to get Roundcube up and running with plesk?
I am trying to configure some type of activesync component with my roundcube install on my plesk 12 box. I downloaded the activesync plugin, enabled it, and get a "your server does not support annotations or meta data" message.
I have also looked into Z Push but wasn't sure the route to go. According to the uservoice forums, plesk states activesync for roundcube is "planned" but it's been planned since 2013.
All of my packages and software is latest versions (via plesk updates) as well.
i then used a MD5 generator to input the hash in the password field of the roundcube user in mysql, with no luck...I even tried to delete roundcube user from mysql, then remove psa-roundcube, then go through the plesk update manager and install roundcube again, did not change nothing, it didn't even create the roundcube user.
Is there anyway i can reinstall roundcube from scratch?PPP 11.5 up to date on ubuntu 12.04
[05-Oct-2013 14:03:54 +0200]: DB Error: _doConnect: [Error message: Access denied for user 'roundcube'@'localhost' (using password: YES)] [Native code: 1045] [Native message: Access denied for user 'roundcube'@'localhost' (using password: YES)]
I installed PLESK12 (or better: I installed the distributed Debian-Image from my hoster) onto my server. Everything works fine as always - except webmail. I did the following:
- in the general webmail properties, I deactivated Horde. roundcube was active and still is (also tried to activate it again) - I also activated roundcube as webmailer in the hosting itsel. - tried to open webmail.mydomain.com --> site not found. I added a mail-adress and tried to use the icon to the webmail --> site not found. - I restarted the server (maybe deactivation Horde did some stuff there...)... no changes.
PLESK 12 (latest update), running on Debian 7.6 ....
I am trying to increase the PHP memory limit for all Plesk hosted sites.
I've updated the 'memory_limit' setting in /etc/php.ini
Then I ran
Code: /usr/local/psa/admin/sbin/httpdmng --reconfigure-all /usr/local/psa/admin/sbin/httpdmng --reconfigure-server Checking a phpinfo() page on hosted sites I see that this setting has not been effective.
Checking some /var/www/vhosts/system/domain.com/etc/php.ini also shows the old setting, and I can see that these files have not been updated.
I note that all these domain php.ini files have been modified earlier today, all at the same time, so presumably some process did regenerate them earlier. All these files hae the "DO NOT MODIFY ..." heading
I realise that I can go the the domain in Plesk GUI and save the PHP settings to force an update, but is there anyway to force the regeneration of all of these files via CLI?
Now the autoresponder works for most mails (try'd from iCloud and other mailservers) except gmail complaints about the syntax because of double <<>>:
Code: Mar 30 09:56:38 server dovecot: service=lda, firstname.lastname@example.org, ip=. sieve: msgid=<CACftkLXd9ha3cJ+GeTYD_CNou71R1b=MzoLfAQ4-rX76NvxJng@mail.gmail.com>: sent vacation response to <email@example.com> Mar 30 09:56:39 server qmail: 1427702199.096480 delivery 133: failure: Connected_to_2a00:1450:4013:0c01:0000:0000:0000:001b_but_sender_was_rejected. /Remote_host_said:_555_5.5.2_Syntax_error._cq5si16636445wjb.115_-_gsmtp/
I want to send a notification (by an email to SMS gateway) when a specific email arrives. I see that Roundcube has a sieve filter option called "Send Notification" and it has three input boxes which have no tooltips and I am unable to find any documents telling me what to fill in those boxes.
The boxes are:
Method Options Message
The Message is obvious enough, but the other two?
For the method, I tried mailto:<firstname.lastname@example.org>
I left the options blank, typed in a short message and tried to save the filter, but it gave me an error message "Unable to save filter - server error occurred". Annoyingly, it then wiped out what I had typed and started me with a blank rule again. I also tried without the < and > round the email address.
Any clues as to proper syntax and what the options are?
Also, is it necessary to have another action after the Send Notification action to file the email away somewhere, or will it just be left in the inbox anyway if the only action is the notification?
My current configuration is: Ubtuntu Server 10.04, Plesk 11.5 and Roundcube 0.9.5 (installed via Plesk as the default webmail application) on Apache.
I played around with an SSL checker (https://www.ssllabs.com/ssltest/) to test my certificates and I found out that Roundcube delivered a broken certificate chain. It didn't deliver the intermediate certificate correctly. I searched through the configuration file of roundcube (/etc/apache2/plesk.conf.d/roundcube.conf) and discovered that there was only an entry for SSLCertificateFile.
To fix this I added the intermediate certificate via SSLCACertificateFile to the configuration file:
Upgraded Plesk 11.5 to 12, enabled rouncube and got an Internal server error when trying to load webmail.domain.com
In /var/log/plesk-roundcube/errors found an error: PHP Warning: system() has been disabled for security reasons in /usr/share/psa-roundcube/bin/update.sh on line 161
Changed php.ini settings, restarted apache, same internal server error, but no more errors in log.
Tried /usr/share/psa-roundcube/bin/update.sh Got errors: WARNING: File type detection doesn`t work properly! Please check the 'mime_magic' config option or the finfo functions of PHP and run this script again. WARNING: Mimetype to file extension mapping doesn't work properly! Please check the 'mime_types' config option and run this script again.
Ubuntu 12.04.4 LTS Panel version 11.5.30 Update #45
The data stored in roundcube webmail (like contacts and signatures ), located in the database table "roundcubemail", is not transferred when migrating the whole server, customer or the domain that uses it. Also in the backup server, account, domain this data is not included.
I think it's a real problem if a customer with many mailboxes, who only uses roundcube, needs a backup or wants to migrate to another server. Ok, this data could be exported in rounbcube with a few mouse clicks, but itÂ´s not very comfortable. In my opinion this should be included in the backup and also in the migration process (migration manager).