I'm using php 5.5.9 with Plesk 12 running on Ubuntu and am trying to increase the max_input_vars value.
For the PHP settings in the additional directives box I have added the following: max_input_vars = 5000
I have saved the settings and even rebooted the server, however the max_input_vars is stuck at 1000 when looking at the php configuration.
why, or when this happened, but all of a sudden the PHP Memory Limit for all of my domains is 64M? I used to have it set to 128. How to change this setting so that all domains have the ability to go to 128M ?
View 5 Replies View RelatedI seem Plesk Roundcube 6 MB attachment size. I Changed all php.ini and php.ini.tpl files but changes nothing. How Can I rise up the attachment size?
View 3 Replies View RelatedI have a virtual server with CentOS 6.4 (Final) and Plesk 11.5.30 and I would like to increase the database size to import because right now it's only 2MB and I have to put online a website with 10MB.
View 5 Replies View RelatedI have tried the links below and it still has not made a difference to the upload limit. I am still getting a 500 error.
[URL] ,.....
In the error logs it is still saying
'mod_fcgid: HTTP request length 16777994 (so far) exceeds MaxRequestLen (16777216)'
I did not try editing last_httpd.include as it was recommended that this was not edited in the post above.
Is there something I am missing!
The Parallels version is 11.0.9 on Linux. It is a VPS package. Is it possible that the host is not allowing the increase or is it all down to my setup?
I am trying to increase the PHP memory limit for all Plesk hosted sites.
I've updated the 'memory_limit' setting in /etc/php.ini
Then I ran
Code:
/usr/local/psa/admin/sbin/httpdmng --reconfigure-all
/usr/local/psa/admin/sbin/httpdmng --reconfigure-server
Checking a phpinfo() page on hosted sites I see that this setting has not been effective.
Checking some /var/www/vhosts/system/domain.com/etc/php.ini also shows the old setting, and I can see that these files have not been updated.
I note that all these domain php.ini files have been modified earlier today, all at the same time, so presumably some process did regenerate them earlier. All these files hae the "DO NOT MODIFY ..." heading
I realise that I can go the the domain in Plesk GUI and save the PHP settings to force an update, but is there anyway to force the regeneration of all of these files via CLI?
How i can increase rate of send/minute for my campaigns of mail?
View 5 Replies View RelatedI'm running Plesk 12. I install it today, using the ISO which parallels provides, which includes centos 6.5 and preinstalled Plesk 12 in my vps. Then I logged in plesk, and I did everything it wants. Then I upgraded my php, to php 5.4.36 according to the manual that Paralells provides, and then I tried to increase the max upload file size for phpmyadmin. I have edited my /usr/local/psa/admin/conf/php.ini file and tried to restart using with 3 different ways using terminal:
1st: service sw-cp-server restart
2st: /etc/init.d/psa stop
/etc/init.d/psa start
3st: reboot (which rebooted all the vps)
My php.ini file is:
short_open_tag = On
y2k_compliance = Off
output_buffering = Off
max_execution_time = 600
max_input_time = 600
memory_limit = 256M
max_file_uploads = 99999
max_input_vars = 2000
[Code] ....
However, when I'm trying to import a 31mb sql file, I always get that error, and only some of my tables are being imported:
#1153 - Got a packet bigger than 'max_allowed_packet' bytes
I have been contracted to resolve an issue for a Plesk installation. This installation in particular is receiving the 'no input file specified' error when attempting to access Horde webmail, and I believe it is because:
IIS is in FastCGI mode (as expected) Permissions are not allowing php to execute out of the expected path.
PHP is working for all other domains (there are multiple) on this account, it is just the horde PHP that is not functional.
I have tried contacting Skype support but received no answer.
I have tried running the commands --fix-webmail that were suggested in other threads, but they have no effect.
Do you know other popular forums for VARs, IT solutions providers/MSPs, and sysadmins?
View 1 Replies View RelatedEvery day we get a couple off Parallels.Diagnostics.RRD.RrdStorageProvider errors:
Parallels.Diagnostics.RRD.RrdStorageProvider - <log4net.Error>Exception during StringFormat: Input string was not in a correct format. <format>Update to database {0} has failed [{2:HH:mm:ss:ffff}]. {1}</format><args>{cpu-1.rrd, Parallels.Diagnostics.RRD.RrdException: Failed to update RRD database "C:Program Files (x86)ParallelsPleskvarhealthdatalocalhostcpu-1.rrd":ERROR: could not lock RRD
, 00:00:09.6084608}</args></log4net.Error>
Source: ParallelsHealthMonitor
We are running a Windows 2008 R2 Enterprise server with the latest Plesk 11.5.30 update 16.
We have a lot of users on IMAP but many are randomly getting disconnected.
How do we increase the max number of allowed concurrent IMAP connections?
I have an Architecture/Interior Design firm and send lots of emails and CAD and photo files. I am designing a website and having it hosted for the first time. (I know...I know...I should have done it long ago..) I have read tons of articles on web hosting.
The website will be lots of photos (thumbnails to be enlarged possibly), text.
Has anyone heard of Inmotion? (web hosting company) They seem to have what I am looking for at a decent price and have gotten some good reviews (but I don't know if those reviews are sponsored by someone).
I work on a Macbook Pro and am looking into creating the website on iWeb....
I have gotten my server configured and running, and have been advised to look into creating virtual hosts for each site, I have found good information on setting virtual hosts within postfix, but does anyone have any good reading on configuring Apache2?
I only have one site I intend to host in the immediacy, but I'd like to host multiples eventually.
I'm thinking about colocating in Milwaukee, purchasing a rack over at the Cogent facility to resell and was faced with a problem. The problem is, to some people, a rather simple one. How can a reseller sell their servers when competition sells their services for unlimited space, bandwidth, domains, sub-domains and such for only $1/month?
I've done the math I could with the information provided to me but am not able to get around the above problem. I can see why some users go to this type of service though. A lot of websites don't even need more than what these sellers offer, and with good reason.
Usually that person only uses 10MB of space and 10GB of transfer.
To break even on hosting, I would have to be able to sell 12 servers at $169 each. Our hardware would be fairly new, capable of whatever you want it to do, short of cutting your lawn, clipping your toenails and what have you, all with 5mbps standard port connectivity inside a 1u case. Obviously you can upgrade the port speeds, drives or whatever else you need in it. This is to snag users into coming with us. Bigger guys charge much more per month for higher end hardware.
I guess what I'm trying to ask is simple. Is it even worth it? Are there users out there who are happy and able to put down $100+ a month for a dedicated server? I'm willing to expand our current services to this type of offering, but I need your input based on your experiences on what you think will end up happening.
I am running a SQL test server here that is piping HUGE amounts of data for a test project I am running.
Approximately 30 queries a second - constantly. That's over 2.5M queries a day -- so we are talking big (I think?)
I am currently running this test on a
AMD Phenom 9300, 4GB RAM - SATA 500GB HDD and I am running MySQL 5.0.51a i386 on CentOS
I have programmed a process control for our applications purpose - basically it controls the launching of our SQL intense applications, and stops launching when the Load is greater than 2.5
I have plans to optimize the number of queries (I will build in a cache to some of the applications - and run INSERT statements all together) however I am looking for SQL tweaks that will improve performance. Would running the 64bit version work better?
I'm considering to buy new Intel Quad Core box for running CPanel shared hosting (high traffic sites).
Supermicro 6015P-8
Intel Clovertown E5310 Quad Core (Quantity 2)
4 x Kingston 1GB 240-Pin DDR2 FB-DIMM ECC Fully Buffered DDR2 667
2 x Seagate Cheetah 10K.7 ST3146707LC 147GB 10,000 RPM (RAID-1)
LSI LOGIC 320X2128-F
Total: $3742
Supermicro 6015V-MT
Intel Clovertown E5310 Quad Core (Quantity 2)
4 x Kingston 1GB 240-Pin DDR2 FB-DIMM ECC Fully Buffered DDR2 667
2 x Western Digital Raptor WD1500ADFD 150GB 10,000 RPM (RAID-1)
3ware 9550SX-4LP
Total: $2950
Which one of the above offers better performance and I/O?
I went with higher end SCSI chassis and higher end LSI card to have 133Mhz on the PCI-X slot, but is it worth the extra cost?
Any better recommendation with similar or cheaper prices?
I'm also wondering which one is faster between a single Intel E5310 Quad Core vs dual Woodcrest 5130?
After peeking around at this board for some years, I decided to create an account.
I'm the original author of Rootkit Hunter and decided to create a new tool, named Lynis.
Lynis is an auditing tool for Unix (Linux, BSD and other). It scans the system and available software to detect security issues, bad/insecure configuration options and unsafe file(s) permissions. It tries to assist administrators in using and maintaining best practices, but also in the common things which get forgotten (like expired SSL certificates).
Though Lynis has been available for some months now, and many
updates/suggestions have been implemented, it still can use a broader user base. So my issue (we are in the technical issues section after all) is that I like more input and want to know what other people audit on their systems. Or what tools they like the most. Of course I have many ideas myself, but with the many different people here (in skills and specialties), every input is most likely improving the tool and increasing security for others as well.
In case you like to try the software (GPL, free to use), the software can be found at www . rootkit .nl (can't use URL's yet, due 5 post policy)
Since I don't only want to announce my tool (but like to have some input), I placed it in this section, hope it doesn't look like a "commercial" sell.
I just got a Dell 1600SC dual xeon 2.8 from the Planet with a Dell DRAC3 remote access card. In my RHEL3 system this hardware combination works great, but in the new RedHat Enterprise Linux 5 system the DRAC accepts no keyboard input after RHEL5 loads, thus making it impossible to login to the OS through the drac remote console redirect. Tech support suggested it was because the RedHat Enterprise 5 and CentOS5 kernel does not load the PS/2 keyboard driver which is required for the Drac3 to accept keyboard input. (a drac4 works, but that's not an option for this server I would guess.)
At tech support's suggestion, I added
atkbd.set=2
to the /boot/grub/grub.conf file
rebooting had no change - still text input to enter the bios, but no text input to login to the OS.
I also added
serial --unit=0 --speed=9600 -word=8 --parity=no --stop=1
terminal --timeout=2 serial console
which I saw in /etc/grub.conf (which is not linked to /boot/grub/grub.conf but instead a separate file) but still no luck - no keyboard input accepted through the drac3 remote console to login to the os through the drac console redirect.
Has anyone solved this hardware/software combination? Or is RHEL5 simply not going to be backwards compatible with the Dell DRAC3 hardware?
Any ideas, suggestions, or solutions would be greatly appreciated as I've been working on getting a solution for this for a week now and no closer at this point.
I would really like to have the DRAC as a backup connection with my server incase any firewall or software update issue ever prevents me from connecting via ssh. I hate to have roll back to an older OS though to get it. I'm stuck.
CentOS - I had php4 running and php5 as cgi but then decided I wanted to have it the other way around i.e. run php5 standard and php4 as cgi.
php5 is now running fine but php4 bombed with this error:
Code:
Unexpected character in input: '?' (ASCII=15) state=1 in /usr/local/cpanel/cgi-sys/php4
I fixed it by doing the following:
EDIT php.ini file:
Normally in /usr/local/php4/lib/php.ini
Under
;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;
UNCOMMENT this line
Code:
;cgi.fix_pathinfo=0
(i.e. remove the ";" infront)
and
CHANGE 0 to 1:
Code:
cgi.fix_pathinfo=1
This is for Linux and must be done with root via SSH
Not sure if this will help anyone, but I thought I'd post it anyway.
I'm getting the feared "input/output error" on /home partition on a freebsd server this server runs RAID-1, dmesg shows:
twed0: controller error - device failure (flags = 0x40)
g_vfs_done():twed0s1g[READ(offset=36997054464, length=16384)]error = 5
anyone knows what's my best action here? unmount /home and fsck it? or shutdown the server and replace a drive? (but, from this error message, I couldn't guess which drive is it... also, the 3dm raid monitoring didn't find any problem, so maybe it's the controller?)
i add the php5 and set php4 as cgi from whm,
after finisging,
it takes errors
Warning: Unexpected character in input: (ASCII=26) state=1 in /usr/local/cpanel/cgi-sys/php4 on line 864
Warning: Unexpected character in input: (ASCII=8) state=1 in /usr/local/cpanel/cgi-sys/php4 on line 864
Parse error: syntax error, unexpected '?' in /usr/local/cpanel/cgi-sys/php4 on line 864
we have problem with increase HDD for VPS in vmware
when i increase HDD show this error:
"Reconfigure Virtual Machine" failed to complete OK
If these problems persist, please contact your system administrator.
DetailsOperation failed because file already exists.
I want to edit the nf_conntrack value 'cause I'm being DDoSed and my /var/log/messages says nf_conntrack is full...
I know how ip_conntrack can be modified.. but I can't figure out how to edit nf_conntrack (installed FC 7...)
if there are any additional settings i must edit on apf to work with nf_conntrack please warn me about it.
Is there a way to increase FTP timeouts to 60 minutes within WHM? Otherwise, how would one do it via SSH?
View 5 Replies View RelatedJust received this from cPanel... it is a substantial price increase (33%). Should be fun explaining to customers why they will start to be billed more...
Earlier this year we released cPanel VPS Optimized as part of our ongoing effort to provide quality web hosting automation software. You can learn more about this optimization of our software for VPS environments on our website at:
http://www.cpanel.net/products/cpvps/
In order to provide optimized software and ensure continuous updates for your virtual server customers, effective September 1, 2008 the monthly pricing for all internal virtual server licenses will be increased by $2 per license.
This price increase is for virtual server licensing only and will not affect your dedicated server license pricing.
i have a dedicated server windows 2008
and i created users on the group (remote desktop users)
but only 2 users can join online
how can i increase this?
althogh the cpu is very powerful now,
i feel the sata speed and io is the bottleneck of server,
if we use four SATAII HDs to do raid10,
about the hd performance,
will take how many more than original one sata hd?
I'm considering upgrading our company's server. We run an ecommerce site php/mysql based, we have about 12,000 visitors per day and we use up about 1500 gig per month. Simple ecommerce site, nothing fancy. We had some complains from people that our site is "slow" (despite it running smoothly for us, but these people claimed that only our site was "slow" and that they use fast connections) so that's why now I'm thinking maybe its time to upgrade.
We are using softlayer, for an extra $50 per month they recommended that we upgrade from our Opteron 1216 to "Xeon 3220 - 2.40GHz (Kentsfield) - 2 x 4MB cache"
Are we going to see a serious increase in performance? Will the increase be enough that most visitors will actually be able to feel it?
