I'm trying to connect to the server via SFTP but when I check the box to do that in Total Commanders settings box it says I need the OpenSSL dll's. I downloaded the must current file from [url] but I can't find any dll files in it and I'm unsure how to proceed.
View 1 RepliesI couldn't keep my mouth shut (technically fingers). A customer wanted to upgrade servers and he needed a way to move the data across. Since I don't allow hard drives to be swapped, they have to do it manually all by themselves. I generally allow up-to 4 days for them to transfer data and make DNS changes, etc. But this time, I offered help! I agreed to move the data (darn me) and it just came out of me, involuntarily.
God knows what just happened... but in a positive way, customer is extremely happy!
So...
Both servers are on cPanel - with root access (duh)
200 odd files which total to 25 GB
1 database about 100 MB in size (no biggie)
I was planning on using one of my Windows 2003 servers (via remote desktop) to download the 25 GB and upload the 25 GB, but that sounds like a waste of resources and time.
I am getting a new server. I usually install Midnight Commander on every server. I downloaded the latest RPM from RedHats website and installed the RPM with no problem.
However, when I start Midnight Commander (MC) the "gui" part is messy. It seems like a font issue or so. The frame - usually a thin line around the window and columns, is now an ugly looking character "тттттттттттттт" (should normally be "----------").
Any idea how I can fix that? I also tried to install MC from the source file instead of the RPM, but get the same bad result.
RedHat ES4 is the operating system.
I was told multiplying the core by the cpu ghz is a common misconception, if so what is the right way?
View 1 Replies View RelatedI'm already dealing with this, however I feel you guys should know about the company InLabz (inlabz.com).
This isn't a thread attacking the company, however I feel that when a company totally rips a layout (down to the banners on the rotator and even the links!) this community should know about it.
Basically, they've copied every single aspect of SimplexWebs (simplexwebs.com) - every single minor detail. Therefore, I wouldn't recommended this company. I'm trying to find an email address, or another means of contact, so that I'm able to contact them regarding this issue.
I have got 2 low budget dedicated servers from poundhost,I would like to find a way to limit their total monthly bandwith to 5TB so that I dont get past this limit even if the server stays for 1 day with blocked traffic or else! The one server is cent os 5 and the other is windows server.
View 6 Replies View RelatedRHEL4 Box
No Control Panel
Current Version of OpenSSL = OpenSSL 0.9.7a Feb 19 2003
which is the most current version available via 'up2date'.
Need to update to 0.9.8.
I have download the source for 0.9.8h and have:
#./config --prefix=/usr/local --openssldir=/usr/local/openssl
#make
#make test
#make install
All commands ran without errors.
When I run:
# openssl version
OpenSSL 0.9.7a Feb 19 2003
# whereis openssl
openssl: /usr/bin/openssl /usr/local/bin/openssl /usr/include/openssl /usr/local/openssl /usr/share/man/man1/openssl.1ssl.gz
# rpm -qa | grep openssl
openssl-devel-0.9.7a-43.17.el4_6.1
openssl-0.9.7a-43.17.el4_6.1
xmlsec1-openssl-1.2.6-3
openssl096b-0.9.6b-22.46
How can I get the version updated?
what is the best way to upgrade Openssl
to the latest version
openssl-0.9.8g
in my cpanel server
openssl version
OpenSSL 0.9.7a Feb 19 2003
[Sun Jul 27 15:06:12 2008] [error] [client ] % Total % Received % X
[Sun Jul 27 15:06:12 2008] [error] [client ] ferd Average Speed Time Time Time Current
[Sun Jul 27 15:06:12 2008] [error] [client ] Dload Upload Total Spent Left Speed
[Sun Jul 27 15:06:12 2008] [error] [client ]
0 0 0 0 0 0 0 0 --:--:-- --:--:-- 0
0 0 0 0 0 0 0 0 --:--:-- 0
Have you ever seen error like this?
When I first installed Plesk on my VPS I had a diskspace of 100GB.
After that I upgraded my VOS I had a diskspace with 150GB of storage.
When I read my statistics, plesk only recognizes 100GB in stead of 150.
How could I update these statistics?
I might still be a bit too close to the newbie level to be trying this
but I wanted upgrade various components of my cpanel install for security issues.
So I got openssl to update to 0.9.8g and that seemed to be working correctly.
Quote:
openssl version
OpenSSL 0.9.8g 19 Oct 2007
So now I am trying to build PHP 4.4.8 like this:
Quote:
./configure --with-litespeed --with-config-file-path=../php --with-mysql=/usr --with-zlib --with-zlib-dir=.. --with-gd --with-jpeg-dir=.. --with-png-dir=.. --enable-shmop --enable-track-vars --enable-sockets --enable-sysvsem --enable-sysvshm --enable-magic-quotes --with-openssl
And it fails because of the openssl:
Quote:
Make
...
In function `zif_openssl_seal':
/php-4.4.8/ext/openssl/openssl.c:2885: undefined reference to `EVP_CIPHER_CTX_block_size'
collect2: ld returned 1 exit status
(I tried --with-openssl=/usr with no change)
Do you have plans for building Apache 2.4 with OpenSSL 1.0.2? One good reason for upgrading Apache to OpenSSL to 1.0.2 would be the ability to disable TLS session tickets, eq. when using PFS:
Code : SSLOpenSSLConfCmd Options -SessionTicket
Here are a few references:
[URL] ....
[URL] ....
I tried to experiment with replacing OpenSSL dlls and exe in apachein directory but that did not work, because it looks like SSLOpenSSLConfCmd configuration directive is only available when Apache is compiled against OpenSSL 1.0.2.
Currently I am using Apache 2.4.9 OpenSSL 1.0.1g (VC10), want to migrate openSSL 1.0.1h to resolve the vulnerability issue.is there way to migrate openssl alone in my existing apache build ?
View 9 Replies View Relatedwe need to upgrade the openssl modules, we have apache 2.2 installed and openssl version is 1.0.0,apache and openssl are in solaris9 SPARC.
View 4 Replies View RelatedI am initiating this poll to see how many number of Windows VPS plans are sold every month by an average windows vps hosting company?
Only serious members, already selling windows vps hosting should participate in this poll.
so I got OpenSSL 0.9.8k up and installed, no issued:
Quote:
# openssl
OpenSSL> version
OpenSSL 0.9.8k 25 Mar 2009
OpenSSL>
Rebuilt cURL (and then php), httpd and proftpd but all of them are still linking to the older libraries for some reason
Quote:
# curl -V
curl 7.19.4 (x86_64-unknown-linux-gnu) libcurl/7.19.4 OpenSSL/0.9.8g zlib/1.2.3
Protocols: tftp ftp telnet dict ldap http https ftps
Features: IPv6 Largefile NTLM SSL libz
Quote:
[Tue Apr 14 00:11:03 2009] [notice] Apache/2.2.11 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.8g DAV/2 PHP/5.2.9 Apache configured -- resuming normal operations
Quote:
Starting proftpd: - mod_tls/2.2.1: compiled using OpenSSL version 'OpenSSL 0.9.8i 15 Sep 2008' headers, but linked to OpenSSL version 'OpenSSL 0.9.8g 19 Oct 2007' library
proftpd has its own set of issues obviously built with i headers and linked to g headers. Any ideas wtf I did? I recomplined and restarted everything. I removed the g and i libraries completely. OpenSSH seems happy and nothing is actually "wrong", the server is working fine but I'm really anal retentive this way...it's kinda how I feel "safer" at the OS level.
Last week I have updated the apache from 2.4.6 to 2.4.9 version in Win 2008, 64-bit server. There was no openSSL and update was successful. Later I did the update in QA with openSSL and again the updte was successfully completed. Apache services was running fine and everything looked nice.
When I did the same update in the prd where openSSL is also there, it failed to start the service.
steps to update the apache from 2.4.6 to 2.4.9
----------------------------------------------
1> stop the apache services
2> Take the backup by copying original Apache installation directory and rename it . (eg I:Program Files (x86)Apache Software FoundationApache2.2 to Apache2.2_old)
3> Unzip the latest binaries to the temp directory
4> Copy the following files apachebin , apachemodules to the Apache Inst Directory ( I:Program Files (x86)Apache Software FoundationApache2.2)
5> start the apache service
----------------------------------------------------
QA and PRD both has enabled openSSL but it was prd where we got the issue , and the apache services couldnt be started. We have had to revert the change. Find the error log in the apache directory
--------------------------
[Tue Jun 24 21:12:12.665632 2014] [ssl:emerg] [pid 3336:tid 320] AH02561: Failed to configure certificate
RGWEB58V.brotherdc.eu:443:0, check G:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/server.crt
[Tue Jun 24 21:12:12.665632 2014] [ssl:emerg] [pid 3336:tid 320] SSL Library Error: error:0906D06C:PEM
routines:PEM_read_bio:no start line (Expecting: CERTIFICATE) -- Bad file contents or format - or even just a
forgotten SSLCertificateKeyFile? [Tue Jun 24 21:12:12.665632 2014] [ssl:emerg] [pid 3336:tid 320] SSL Library Error: error:140AD009:SSL
routines:SSL_CTX_use_certificate_file:PEM lib
---------------------------------------
I read somewhere that there is bug in 2.4.9 as this version breaks the openSSL.
Also read on this forum that someone resolved the issu by changing the server certificate from DER to PEM.
c:Apache24bin>openssl.exe
WARNING: can't open config file: c:/openssl-1.0.1e-X64/ssl/openssl.cnf
OpenSSL>
I'm getting the below error message when trying to perform "configtest" after upgrading apache to 2.4.12 version with success.
/home/apache/bin/httpd: symbol lookup error: /home/apache/bin/httpd: undefined symbol: SSL_CONF_CTX_new
Note: I received the error after recently upgrading my openssl to 1.0.2.
Just wonder how to get rid of the error message.
Running on Ubuntu Server 12.04.05 LTS 32bit.
We're having problems with the Roundcube webmail spell check, and upon checking the log we get the error 'Unable to find the socket transport SSL'. From what I can find out this is normally due to Open SSL not being enabled, but it is, you can check our php config here.
View 3 Replies View Relatedto set up a batch file on our server (Windows Server 2003) to upload an xml document to the web everyday. Due to nature of our business, we require the ftp to be secure (SFTP), so i need a DOS SFTP add-on: any suggestions.
It is also a requirement that we PAY for it (management?! ),
we have a WHM account... we have different accounts on that...and for each account, there are add-on domains underneath that. (i hope you know what i mean)
and we set it up to use only SFTP to connect to server. no FTP.
after we have set it up that way, it seems that we can only connect to SFTP using 1 user/pass for each account... that is the same user/pass we use for Cpanel of each account.
say, i have Account A... under Account A, i have addon domains: A1.com, A2.com, A3.com...
setting SFTP only on that server, all those addon domains of Account A, can only use 1 user/pass to login to SFTP which is the cpanel access also of Account A.
question is.... is this behavior correct??
how can we create a different user for each add-on domain?
I'm trying to upload about 200 Gb of data and it became clear to me to route it out a specific connection sftp was the way to go.. (the ssh2 kind)
The problems I'm now having is that the 2 applications I rely on cannot get the job done.. CuteFTP Pro 8 can't even begin to get it done it crashes, errors out etc. and for while there it looked like the free program WinSCP was going to get it done but now it errors out/crash's and while it actually did get about 1/4 of the data done, it seems to think when it reported it done.. it got it all (that is when it doesn't crash for no reason, these crashes only occurred mainly when I tried to get it do 3/4's or the rest of the data)
So anyway.. recommend me a good client app if you can.. (that does real folder sync transfers) preferably ssh2/sftp, I'm uploading to dreamhost if that makes a difference I assume it doesn't though..
I've noticed that on most servers I use, downloading a file over SFTP is about 4x slower than downloading over HTTP. Can anyone tell me why and if it's possible to tune the SFTP server?
- neither the server nor my desktop shows significant CPU use so it isn't the processing overhead of encryption.
- The symetric key ciphers used should not increase the number of bytes transmitted.
- The file being transferred is already bzipped so the HTTP isn't faster due to compression.
- I'm using OpenSSH on Linux / FreeBSD server side, and WinSCP on Windows XP / Vista client side.
direct root logon to a server is disabled; using another login, obviously. However, I need to be able to SFTP files from my computer to a directory on the server using said login - yet it does not have correct permissions, evidently, and therefore can't even see the directory I need to be able to SFTP files to.
Tried CHOWNing the directory with that usename, giving it 777 permissions, etc.
i am not able to get connect to SFTP server
domain : testing.com
user : test@testing.com
pass : 123456
port : 7256
& getting following error
#####################
Status: Connecting to testing.com:7256...
Response: fzSftp started
Command: open "test@testing.com@testing.com" 7256
Command: Trust new Hostkey: Yes
Command: Pass: ************
Error: Authentication failed.
Error: Critical error
Error: Could not connect to server
#####################
note that we are able to get connected to the server with FTP using same username & password
i asked our data centre regarding this issue & they suggested to use root password , but we don't want to give root password to the client
I have it setup and have a user created that can upload files to my website.
The problem that I am running in to is that the files that this user uploads are owned by him not the cpanel website user. Thus when I try to view the page in my browser I get a server 500 error since the site is set to only serve up pages that are owned by the cpanel website user.
When using FTP in the same way we did not have this problem as the file that was uploaded would automatically be owned by the cpanel website user.
I just got a barebone server. Installed apache2, php5, mysql,phpmyadmin.
I only have SSH access to the server. I wish to use CoreFTP to transfer some webpage files to /var/www folder. I can login the server using CoreFTP's SSH/SFTP and it displays all the files and directories, but I do not have the permission to write.
My question is, how do I give myself permission to write? Here is the id of my user:
uid=1000(charlie) gid=1000(charlie) groups=1000(charlie),4(adm),20(dialout),24(cdrom),46(plugdev),110(lpadmin),111(sambashare),112(admin)
I'm noticing that no one seems to offer SSH or SFTP access to Windows hosts. It seems it would be more difficult to offer this, but does anyone reputable offer this?
I am planning on uploading semi-private MS Access databases (hence the lack of Unix options) for site use, and I'd rather not expose them unencrypted.