Apache :: OpenSSL - Cannot Open Config File
Feb 24, 2015c:Apache24bin>openssl.exe
WARNING: can't open config file: c:/openssl-1.0.1e-X64/ssl/openssl.cnf
OpenSSL>
c:Apache24bin>openssl.exe
WARNING: can't open config file: c:/openssl-1.0.1e-X64/ssl/openssl.cnf
OpenSSL>
I got this message now for the second time:
Template processing failed: file = /usr/local/psa/admin/conf/templates/default/domainWebmail.php, error = Template_Exception: No data. file: /usr/local/psa/admin/plib/Template/Processor.php line: 28 code: 0 Previous error: Template_Variable_Exception: No data. file: /usr/local/psa/admin/plib/Template/Variable/AbstractCachedData.php line: 67 code: 0.
How can this happen and how to solve this?
How can I setup my control panel to update the Apache config file
View 4 Replies View RelatedDo you have plans for building Apache 2.4 with OpenSSL 1.0.2? One good reason for upgrading Apache to OpenSSL to 1.0.2 would be the ability to disable TLS session tickets, eq. when using PFS:
Code : SSLOpenSSLConfCmd Options -SessionTicket
Here are a few references:
[URL] ....
[URL] ....
I tried to experiment with replacing OpenSSL dlls and exe in apachein directory but that did not work, because it looks like SSLOpenSSLConfCmd configuration directive is only available when Apache is compiled against OpenSSL 1.0.2.
Currently I am using Apache 2.4.9 OpenSSL 1.0.1g (VC10), want to migrate openSSL 1.0.1h to resolve the vulnerability issue.is there way to migrate openssl alone in my existing apache build ?
View 9 Replies View Relatedwe need to upgrade the openssl modules, we have apache 2.2 installed and openssl version is 1.0.0,apache and openssl are in solaris9 SPARC.
View 4 Replies View RelatedLast week I have updated the apache from 2.4.6 to 2.4.9 version in Win 2008, 64-bit server. There was no openSSL and update was successful. Later I did the update in QA with openSSL and again the updte was successfully completed. Apache services was running fine and everything looked nice.
When I did the same update in the prd where openSSL is also there, it failed to start the service.
steps to update the apache from 2.4.6 to 2.4.9
----------------------------------------------
1> stop the apache services
2> Take the backup by copying original Apache installation directory and rename it . (eg I:Program Files (x86)Apache Software FoundationApache2.2 to Apache2.2_old)
3> Unzip the latest binaries to the temp directory
4> Copy the following files apachebin , apachemodules to the Apache Inst Directory ( I:Program Files (x86)Apache Software FoundationApache2.2)
5> start the apache service
----------------------------------------------------
QA and PRD both has enabled openSSL but it was prd where we got the issue , and the apache services couldnt be started. We have had to revert the change. Find the error log in the apache directory
--------------------------
[Tue Jun 24 21:12:12.665632 2014] [ssl:emerg] [pid 3336:tid 320] AH02561: Failed to configure certificate
RGWEB58V.brotherdc.eu:443:0, check G:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/server.crt
[Tue Jun 24 21:12:12.665632 2014] [ssl:emerg] [pid 3336:tid 320] SSL Library Error: error:0906D06C:PEM
routines:PEM_read_bio:no start line (Expecting: CERTIFICATE) -- Bad file contents or format - or even just a
forgotten SSLCertificateKeyFile? [Tue Jun 24 21:12:12.665632 2014] [ssl:emerg] [pid 3336:tid 320] SSL Library Error: error:140AD009:SSL
routines:SSL_CTX_use_certificate_file:PEM lib
---------------------------------------
I read somewhere that there is bug in 2.4.9 as this version breaks the openSSL.
Also read on this forum that someone resolved the issu by changing the server certificate from DER to PEM.
Rapidly growing error logs showing the same message
$ug-non-zts-20020429/ffmpeg.so' - /usr/local/lib/php/extensions/no-debug-non-zts-20020429//usr/local/lib/php/extensions/no-debug-non-zts-20020429/ffmpeg.so: cannot open shared object file: No such file or directory in Unknown on line 0
root@server [~]# ls /usr/local/lib/php/extensions/no-debug-non-zts-20020429
./ ../ eaccelerator.so*
root@server [~]# ls /usr/local/lib/php/extensions/no-debug-non-zts-20020429
./ ../ eaccelerator.so*
Using cpanel 11 / centos 4
I'm getting the below error message when trying to perform "configtest" after upgrading apache to 2.4.12 version with success.
/home/apache/bin/httpd: symbol lookup error: /home/apache/bin/httpd: undefined symbol: SSL_CONF_CTX_new
Note: I received the error after recently upgrading my openssl to 1.0.2.
Just wonder how to get rid of the error message.
Running on Ubuntu Server 12.04.05 LTS 32bit.
i Install and Configer CSF , i mess up My VPS , and have no idea whts wrong.
Could Some 1 Give me the Config file PrConfiguered ,
My Vps Details .
Centos 5.3
512 mb
Hybervm + Kloxo .
No any other Firewall installed or Floods Filters..
its Clean Now waiting for Right Config File ..
This is Personal VPS no one will use ftp, or SSH, Kloxo ...
i can't enter to the SSH secure file transfer and show me that msg':
Failed to open a secure file transfer session
Most likely the sftp-server is not in the path of user on the server-side
how can i edit iptables config file and update it?
because my server is under DDos attack.
I have placed a Content Management System on an Apache server using Cpanel and when I try to install I get messages about folders and files needing permission changes, then after installation some modules won't work because of wrong permissions. The solution to make everything work is to set all folders and files to 0777 but then that would just open up to insecurity. Also I can't set files to 0444 using an FTP client. It can only be done via Cpanel's file manager.
I install the same CMS on another hosting service with the same Apache/Cpanel config and it does not require any CHMOD. The app installs without errors and functions correctly with folders at 0755 and files at 0644.
It seems most shared hosting nowadays work as the latter statement so what could be the cause why the other hosting server require all the permission changes?
MY VPS IS DOWN.
i have this error on concole on hypervm
enter into CT 1820 failed
Unable to open pty: No such file or directory
I have following error when try to login in my vps, how can resolve this issue?
Code:
Last login: Thu Jun 19 21:00:43 2008 from xxx.xxx.xxx.xxx
ALERT! You are entering a secured area! Your IP and login information
have been recorded. System administration has been notified.
This system is restricted to authorized access only. All activities on
this system are recorded and logged. Unauthorized access will be fully
investigated and reported to the appropriate law enforcement agencies.
enter into VE 270 failed
Unable to open pty: No such file or directory.
I am trying to increase my open file limit on my CentOS release 4.6 VPS.
I have tried modifying my /etc/security/limits.conf with the following:
@mysql soft nofile 4096
@mysql hard nofile 4096
@mysql soft sigpending 4096
@mysql hard sigpending 4096
Even is a mannual set it with "ulimit -n 4096 mysql" it will not stick.
Any ideas what I can do to get this limit increased permanently?
none:0: open: /etc/named.conf: file not found
i had install cpanel on Cent Os 5 on a VPS
Cpanel Correctly Running but named does not working !
i try to restart named but it say :
root@server [/etc]# service named restart
Stopping named: [ OK ]
Starting named:
Error in named configuration:
none:0: open: /etc/named.conf: file not found
[FAILED]
I installed Plesk on a VPS running on Ubuntu 14.04. When I try to open phpMyAdmin the following error message appears:
You probably did not create a configuration file. You might want to use the setup script to create one.
Error
MySQL said: cannot connect: invalid settings.
When I try to click on the setup script link another error message pops up:
Error in Processing Request
Error code: 404
Error text: Not Found
What do I have to do to make phpMyAdmin work?
I can't seem to remember, but what's that command or file used in Linux so that you can view/adjust the number of open files and others in the system?
View 3 Replies View RelatedOn attempting to select the configuration->filter option on RoundCube, we got the error message:
SERVICE CURRENTLY NOT AVAILABLE!
Error No. [501]
On /var/log/plesk-roundcube/errors we can see the following logs:
[06-Jun-2015 14:57:17 -0300]: PHP Error: SieveRules plugin: Unable to open default rule file in /usr/share/psa-roundcube/plugins/sieverules/sieverules.php on line 1523 (GET /roundcube/?_task=settings&_action=plugin.sieverules)
...
[06-Jun-2015 14:57:17 -0300]: PHP Error: SieveRules plugin: Unable to open example rule file in /usr/share/psa-roundcube/plugins/sieverules/sieverules.php on line 1560 (GET /roundcube/?_task=settings&_action=plugin.sieverules)
...
[06-Jun-2015 14:57:17 -0300]: PHP Error: Error loading template for sieverules.sieverules in /usr/share/psa-roundcube/program/include/rcmail_output_html.php on line 496 (GET /roundcube/?_task=settings&_action=plugin.sieverules)
ive just upgraded to Apache 2.2.6 today and ive found a problem. Im trying a new way of doing mass virtual hosting using mod macro.
<Macro vhost $domain $path>
<VirtualHost *>
VirtualDocumentRoot "$path/Web/"
ServerName $domain.spkweb.com
ErrorDocument 404 "drive:/folder/404.php"
php_admin_value open_basedir "$path/Web/;$path/Temp/"
php_admin_value upload_tmp_dir "$path/Temp/"
<Directory "$path/Web/">
Options FollowSymLinks
AllowOverride all
Allow from all
</Directory>
</VirtualHost>
</Macro>
Use vhost DJSmithy "drive:/Hosting/DJSmithy"
Mostly it works fine but if there is a 404 then i get a 403 permission denied error instead of the error page. the folder that contains the error page does have a <directory> bit for it and i even tried adding it into the virtual host but i get the same result.
if the file does exist then it loads like normal
can anyone see any problems with my config or do i have to do something diff for 2.2.6?
I had to switch to Apache 2 from Lighttpd and I'm running into a little bit of trouble trying to make it handle all my traffic. I'm using the worker MPM module, which has the following default config:
Code:
<IfModule mpm_worker_module>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
I need Apache to be able to handle about 200-500 requests per second. I tried increasing ServerLimit and MaxClients but that didn't work very well.
I have kind of inherited this server from another person so I'm not totaly sure how it was set up. It is a:
red hat machine running
2.6.9-22.0.2.ELsmp kernel
running apache 2.0.52(red hat)
at any rate this server mainly serves up images but also a few video encoded in flash(.swf files). Basically the issue at hand is there are a few domain names that all point to this server but only one domain name will let the .swf files stream correctly. All other domain names will wait for the whole thing to download before playing. I'm pretty new to apache 2, but I do know apache 1 pretty well. I'm not totally sure where to start with all this. The server is set up with no virtual hosting for each domain which I think could a problem.
how can i compile apache and php in a way that i want?
a customized compilation of php and apache?
will it be gone after plesk update?
or has plesk a module to work as easyapache in cpanel?
I used to have a dedicated server running Apache 1.x (1.3 I think) and in my httpd.conf there were entries about keepalives, maxservers, minservers etc.
I've now got a VPS from FutureHosting, which is brilliant. In my httpd.conf file though, there are none of the above entries. It is running the latest version of Apache (2.2.11).
Are all the keepalive / minservers settings handled automatically in 2.2 or do I just have a default setting and maybe need to add them manually?
I don't have any load issues so haven't touched the config so far.
i thought for moveing my apache 2.0 to 2.2 but iam in little bit confused for max client and keep alive setting in normal apache 2.0 we can see that in httpd.conf file but in apache 2.2 we can able to see that all,any one help me in finding these kind of setting and move my apache 2.2 without any issues
View 0 Replies View RelatedI run a Perl/CGI script from a Web page to download some files located in a Linux server. When I click from a Windows XP on the link of the file to download via this Web page (IE), a dialog box will be displayed to ask me to "Open" or "Save" the file (.txt, .doc, .xls,...) but for some extensions like ".dat" or ".asc", the dialog box ask me to save it only and I have not an "Open" button.
I tried to configure Apache to add these extensions as text/plain by adding these lines in http.conf:
AddType text/plain .asc .txt .dat
How can I add these extensions (.dat, .asc and other extensions) to Apache configuration to be able to open it with Textpad or Notepad?
I hope that the users will be able to open it with Notepad or TextPad without saving it. I know that we can add this type directly in the stations XP but I have a lot of users and I cannot manage that. I hope to perform it from the server. I think something is wrong or missing in my AddType, AddHandler or LoadModule?
I have put up a WAMP server that is based on Apache2.4.4. I am trying to utilize the rotatelogs.exe to rotate my access log every night. I have this working on IBM HTTP installations. IBM's HTTP is based on Apache 2.2. why the CustomLog command is not working? The command under my Virtual Hosts that I am using is:
<VirtualHost *:80>
ServerName xxxxxxxx
DocumentRoot C:wampwww
[Code]....