direct root logon to a server is disabled; using another login, obviously. However, I need to be able to SFTP files from my computer to a directory on the server using said login - yet it does not have correct permissions, evidently, and therefore can't even see the directory I need to be able to SFTP files to.
Tried CHOWNing the directory with that usename, giving it 777 permissions, etc.
i am not able to get connect to SFTP server
domain : testing.com
user : test@testing.com
pass : 123456
port : 7256
& getting following error
#####################
Status: Connecting to testing.com:7256...
Response: fzSftp started
Command: open "test@testing.com@testing.com" 7256
Command: Trust new Hostkey: Yes
Command: Pass: ************
Error: Authentication failed.
Error: Critical error
Error: Could not connect to server
#####################
note that we are able to get connected to the server with FTP using same username & password
i asked our data centre regarding this issue & they suggested to use root password , but we don't want to give root password to the client
I have read that although chained root ssl certificates can be more difficult to install they are actually more secure since the root certificate cannot be compromised, only the intermediary.
Is this true? It looks like both google and amazon both use chained SGC certs.
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
to set up a batch file on our server (Windows Server 2003) to upload an xml document to the web everyday. Due to nature of our business, we require the ftp to be secure (SFTP), so i need a DOS SFTP add-on: any suggestions.
It is also a requirement that we PAY for it (management?! ),
we have a WHM account... we have different accounts on that...and for each account, there are add-on domains underneath that. (i hope you know what i mean)
and we set it up to use only SFTP to connect to server. no FTP.
after we have set it up that way, it seems that we can only connect to SFTP using 1 user/pass for each account... that is the same user/pass we use for Cpanel of each account.
say, i have Account A... under Account A, i have addon domains: A1.com, A2.com, A3.com...
setting SFTP only on that server, all those addon domains of Account A, can only use 1 user/pass to login to SFTP which is the cpanel access also of Account A.
question is.... is this behavior correct??
how can we create a different user for each add-on domain?
I'm trying to upload about 200 Gb of data and it became clear to me to route it out a specific connection sftp was the way to go.. (the ssh2 kind)
The problems I'm now having is that the 2 applications I rely on cannot get the job done.. CuteFTP Pro 8 can't even begin to get it done it crashes, errors out etc. and for while there it looked like the free program WinSCP was going to get it done but now it errors out/crash's and while it actually did get about 1/4 of the data done, it seems to think when it reported it done.. it got it all (that is when it doesn't crash for no reason, these crashes only occurred mainly when I tried to get it do 3/4's or the rest of the data)
So anyway.. recommend me a good client app if you can.. (that does real folder sync transfers) preferably ssh2/sftp, I'm uploading to dreamhost if that makes a difference I assume it doesn't though..
I've noticed that on most servers I use, downloading a file over SFTP is about 4x slower than downloading over HTTP. Can anyone tell me why and if it's possible to tune the SFTP server?
- neither the server nor my desktop shows significant CPU use so it isn't the processing overhead of encryption.
- The symetric key ciphers used should not increase the number of bytes transmitted.
- The file being transferred is already bzipped so the HTTP isn't faster due to compression.
- I'm using OpenSSH on Linux / FreeBSD server side, and WinSCP on Windows XP / Vista client side.
I have it setup and have a user created that can upload files to my website.
The problem that I am running in to is that the files that this user uploads are owned by him not the cpanel website user. Thus when I try to view the page in my browser I get a server 500 error since the site is set to only serve up pages that are owned by the cpanel website user.
When using FTP in the same way we did not have this problem as the file that was uploaded would automatically be owned by the cpanel website user.
I just got a barebone server. Installed apache2, php5, mysql,phpmyadmin.
I only have SSH access to the server. I wish to use CoreFTP to transfer some webpage files to /var/www folder. I can login the server using CoreFTP's SSH/SFTP and it displays all the files and directories, but I do not have the permission to write.
My question is, how do I give myself permission to write? Here is the id of my user:
uid=1000(charlie) gid=1000(charlie) groups=1000(charlie),4(adm),20(dialout),24(cdrom),46(plugdev),110(lpadmin),111(sambashare),112(admin)
I'm noticing that no one seems to offer SSH or SFTP access to Windows hosts. It seems it would be more difficult to offer this, but does anyone reputable offer this?
I am planning on uploading semi-private MS Access databases (hence the lack of Unix options) for site use, and I'd rather not expose them unencrypted.
I am considering renting a server, but got one question first.
If I sign up for one unmanaged root server with a control panel, from a provider. And just put my website on the server, and let it run there.
Is that a security risk? Is it easy for people to hack into my server, or anything like that?
How do you plan new network cable on your rack?
5e utp
5e ftp
6 utp
6 sstp
6a sftp
I have installed ProFTPd through Webmin onto Ubuntu 8.10 Server edition.
I can connect to ProFTPd via FTP on Port 21 no problem, but currently am unable to via SFTP (using WinSCP).
I would like to block all FTP access on Port 21 and only make it only possible to connect via SFTP/SSH on Port 22.
Most of my background is the Linux/Mac world, but I do have ample Windows skill set, just not as refined or aware of all the available applications in Windows world, geared toward Joe User.
My accountant needs to run two sets of backups. First, he wants to backup his documents to an offsite location (space on his web hosting service) and he wants them to be encrypted on the web hosting server, which is understandable and recommended.
Short of installing TrueCrypt and using Filezilla with a manual process , is there any free or low-cost (but well supported) that would automatically upload revised documents and data files in encrypted form? This would not be very much data, just simple documents and accounting data files.
Secondly, he wants to have a "snapshot" of his HD to a USB portable drive (standard 2.5 HD). On Linux, I'd recommend Rsync, on Mac, Rsync or SuperDuper (and others), but on Windows, any recommendations? I see Unison, etc. I would just want it to update any files that have changed to make subsequent backups run much faster, such as only 15-18 minutes (depending on amount of data changed) and make the drive bootable, so in the event he looses his HD in his laptop, he could boot from the USB portable drive and be back up and running.
While I know I could easily figure out all this on a more manual basis, looking for things that would be friendly for Joe User to use and/or be something that can be setup and would run pretty much on it's own, assuming the backup drive was connected or system was on the Internet to upload the files, etc.
I am unable to find how to resume file transfor via sftp and command line:
I use PUT command to upload file, but when connections fails and I start again, the transfer starts from its beginning - how could I made it to check the uploaded part and then resume?
I'm not that confident with installing or compiling on Linux and I guess that's where the problem is. So any assistance may go along way.
Basically I am running a AMD64 on a Fedora Core server. I noticed when I wrote a php script which I want to sftp some data to another server I was getting a message saying that :
Quote:
Call to undefined function ssh2_connect()
I thought this was a bit strange as I usually have had this feature running without a problem on other machines... Anyway after investigating the problem it looked as though I needed to add a couple of extensions 'OpenSSL' and 'libssh2' as specified on this page :[url].
I downloaded them and OpenSSL appeared to install. However when trying to install libssh2 I received the following:
Quote:
/usr/bin/ld: /usr/local/ssl/lib/libcrypto.a(md5_dgst.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC
/usr/local/ssl/lib/libcrypto.a: could not read symbols: Bad value
Obviously I can't continue onward until I get this problem fixed, but have been searching around for near 7 hours now and seem to be chasing my tail? Can anyone point on what I am doing wrong?
BTW within the libssh2-0.17 dir I am first running ./config then make then make install.
FTP is a very old transfer technology with a lot of security problem.
Why don't enable directly SSH or SFTP on Plesk by default or by a simple way?
It's very difficult to enable it now
I'm loosing a lot of time to find how to enable it on plesk 12 and still not undestanding why do not work.
I'll try to make this long story short, but this morning I logged into one of my servers and it showed a read-only filesystem, which I thought my server guys could fix easily. So I put in a ticket. 6 hours later, they tell me that they think the OS is corrupted and I need a new install. They give me KVM over IP so I can go in and 'do' things. I tried to log in as root and it wouldn't let me, so they finally booted in single mode and I can get in and such. When I try to su - root, it tells me that user root can't be found. I also tried to ftp into and out of the server with no luck. I really need this box back up. If not, I need to get all the accounts saved off so that I can build a new box. Everything is there, so I don't want to give up yet.
View 10 Replies View RelatedI'm looking for a relatively cheap shared host, but I'm having trouble finding one with SSH/SFTP transfers. Everyone has FTP, but my concern is that FTP itself is not secure. I was reminded of this recently: http://www.43folders.com/2008/07/14/dump-ftp. Wikipedia documents this as well: http://en.wikipedia.org/wiki/Ftp#Security_problems. So with FTP, my passwords would be transmitted in the clear. (If I'm wrong, please correct me!)
I've been looking at Godaddy or 1&1*. 1&1 has a plan with SSH access that's about twice the cost of the plan I'm looking at. I'm not sure it's worth double the cost.
I'm to the point where I think I've overthought the variety of hosts, but in my estimation it's an important feature. Does anyone (dis)agree that it's important? Any other ideas of hosts?
*I was looking seriously at Bluehost also until I read some of their recent shenanigans here; thanks to everyone here for discussing their problems!
Also, to avoid the inevitable question of what I'm looking for in a host:
100 GB of space
1000 GB of bandwidth/month
Linux-based server
Apache server
10 MySQL databases
PHP (preferably 5)
Python support
Some sort of control panel interface
Good support reputation, preferably ticket-based and with chat support
Automated or easy Wordpress installation would certainly be nice.
The following expect script works perfectly from the command line, but fails under cron:
Code:
#!/usr/bin/expect
spawn sftp -b /root/sftp.txt root@***.***.***.***
expect "password:"
send "password
"
interact
The output is:
Code:
spawn sftp -b /root/sftp.txt root@***.***.***.***
root@***.***.***.***'s password:
I can't work out if the password just isn't getting sent, or if the interact command is causing the script to fail. I also can't fathom why this would only cause a problem under cron.
I'm trying to connect to the server via SFTP but when I check the box to do that in Total Commanders settings box it says I need the OpenSSL dll's. I downloaded the must current file from [url] but I can't find any dll files in it and I'm unsure how to proceed.
View 1 Replies View RelatedSince the migration from Plesk 11.5 to Plesk 12.0 the "chrooted" SFTP accounts do not work anymore. Along with the Plesk migration we have changed the operating system too. We've migrated from CentOS 6 (x86_64) to CentOS 7 (x86_64).
When trying to connect using SFTP on the command line I get the following error message: debug1: Exit status 127...When using an SFTP client such as WinSCP I get logged out immediately without any message.
The OpenSSH configuration is saying:
<...>
Subsystem sftp /usr/libexec/openssh/sftp-server
<...>
The mentioned binary from above does exist:
ls -l /usr/libexec/openssh/sftp-server
-rwxr-xr-x 1 root root 83984 2015-05-12 21:41:56 /usr/libexec/openssh/sftp-server
I have attached the debug output of the SFTP command (plesk_sftp_issue.txt).When I change the option "Access to the server over SSH" to "/bin/bash" the SFTP access works again. But when "chrooted" it stops working.
Plesk 12 under CentOS 7?
I use Plesk 11.5.30 on my vServer. I created a new domain with a new web user and /bin/bash (chroot) setting. I can't login with a SFTP connection to this domain only normal FTP connection works. With existing users I don't have this problem.
View 1 Replies View RelatedWe would like to offer root servers to customers, but we worry that they change the IP address to another IP address in our network and make troubles like this. I think, if a customer takes the same IP like our gateway router, our whole network is not reachable anymore. How can I avoid this?
View 10 Replies View RelatedI am actually very inexpirience in server management. I have a small - I believe - problem. I need to get config file onto my computer from my root server. I can access it through terminal, but it is not very confortable. The config file is on root server.
the file is located at //etc/xxx.conf
Do I need to use web browser to do it? If so how?
Or is there a way that I log to my root server through ssh and transfer onto my computer?
creating a basic redirect. What I need is to redirect the root of my server 173.x.x.x to a file called test.php in the root of my folder.example: when I go to http://173.x.x.x I get redirected to http://173.x.x.x/test.php..
View 3 Replies View Related