Apache :: OpenSSL 1.0.2 - Symbol Lookup Error

Feb 20, 2015

I'm getting the below error message when trying to perform "configtest" after upgrading apache to 2.4.12 version with success.

/home/apache/bin/httpd: symbol lookup error: /home/apache/bin/httpd: undefined symbol: SSL_CONF_CTX_new

Note: I received the error after recently upgrading my openssl to 1.0.2.

Just wonder how to get rid of the error message.

Running on Ubuntu Server 12.04.05 LTS 32bit.

View 6 Replies


Ffmpeg Symbol Lookup Error

May 14, 2009

ffmpeg: symbol lookup error: /usr/lib/libavcodec.so.52: undefined symbol: speex_header_free

I am using a centos 5 vps

View 4 Replies View Related

Mysqlhotcopy Error :: Undefined Symbol Mysql_server_init

Feb 4, 2008

I'm trying to use mysqlhotcopy on freebsd 6.1 with mysql 5.0.45, but I'm getting this error when executing it:

/libexec/ld-elf.so.1: /usr/local/lib/perl5/site_perl/5.8.8/mach/auto/DBD/mysql/mysql.so: Undefined symbol "mysql_server_init"

at first, I was having problems compiling DBD-mysql, because mysql.h and mysqld_error.h wasn't on the include dir, so I had to add -I/usr/local/mysql-5.0.45-freebsd6.0-i386/include to cflags (I also tried -I/usr/local/include/mysql , but same happened)

since the error persisted, I changed all references to mysql_server_init (deprecated) to mysql_library_init (same for mysql_server_end -> mysql_library_end)

and the error still persists!

# ldd /usr/local/lib/perl5/site_perl/5.8.8/mach/auto/DBD/mysql/mysql.so
libz.so => /usr/lib/libz.so (0x28178000)
libcrypt.so.3 => /lib/libcrypt.so.3 (0x28189000)
libm.so.4 => /lib/libm.so.4 (0x281a1000)

View 0 Replies View Related

PHP + OpenSSL, Error Unable To Find The Socket Transport SSL

Jun 20, 2009

We're having problems with the Roundcube webmail spell check, and upon checking the log we get the error 'Unable to find the socket transport SSL'. From what I can find out this is normally due to Open SSL not being enabled, but it is, you can check our php config here.

View 3 Replies View Related

Apache :: 2.4.12 Build With OpenSSL 1.0.2

Feb 11, 2015

Do you have plans for building Apache 2.4 with OpenSSL 1.0.2? One good reason for upgrading Apache to OpenSSL to 1.0.2 would be the ability to disable TLS session tickets, eq. when using PFS:

Code : SSLOpenSSLConfCmd Options -SessionTicket

Here are a few references:

[URL] ....

[URL] ....

I tried to experiment with replacing OpenSSL dlls and exe in apachein directory but that did not work, because it looks like SSLOpenSSLConfCmd configuration directive is only available when Apache is compiled against OpenSSL 1.0.2.

View 3 Replies View Related

Apache :: Way To Migrate Openssl Alone

Jul 1, 2014

Currently I am using Apache 2.4.9 OpenSSL 1.0.1g (VC10), want to migrate openSSL 1.0.1h to resolve the vulnerability issue.is there way to migrate openssl alone in my existing apache build ?

View 9 Replies View Related

Apache :: How To Update Openssl

Apr 5, 2013

we need to upgrade the openssl modules, we have apache 2.2 installed and openssl version is 1.0.0,apache and openssl are in solaris9 SPARC.

View 4 Replies View Related

Apache :: Updating From 2.4.6 To 2.4.9 Breaks OpenSSL

Jun 25, 2014

Last week I have updated the apache from 2.4.6 to 2.4.9 version in Win 2008, 64-bit server. There was no openSSL and update was successful. Later I did the update in QA with openSSL and again the updte was successfully completed. Apache services was running fine and everything looked nice.

When I did the same update in the prd where openSSL is also there, it failed to start the service.

steps to update the apache from 2.4.6 to 2.4.9
1> stop the apache services
2> Take the backup by copying original Apache installation directory and rename it . (eg I:Program Files (x86)Apache Software FoundationApache2.2 to Apache2.2_old)
3> Unzip the latest binaries to the temp directory
4> Copy the following files apachebin , apachemodules to the Apache Inst Directory ( I:Program Files (x86)Apache Software FoundationApache2.2)
5> start the apache service

QA and PRD both has enabled openSSL but it was prd where we got the issue , and the apache services couldnt be started. We have had to revert the change. Find the error log in the apache directory


[Tue Jun 24 21:12:12.665632 2014] [ssl:emerg] [pid 3336:tid 320] AH02561: Failed to configure certificate

RGWEB58V.brotherdc.eu:443:0, check G:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/server.crt
[Tue Jun 24 21:12:12.665632 2014] [ssl:emerg] [pid 3336:tid 320] SSL Library Error: error:0906D06C:PEM
routines:PEM_read_bio:no start line (Expecting: CERTIFICATE) -- Bad file contents or format - or even just a
forgotten SSLCertificateKeyFile? [Tue Jun 24 21:12:12.665632 2014] [ssl:emerg] [pid 3336:tid 320] SSL Library Error: error:140AD009:SSL
routines:SSL_CTX_use_certificate_file:PEM lib


I read somewhere that there is bug in 2.4.9 as this version breaks the openSSL.

Also read on this forum that someone resolved the issu by changing the server certificate from DER to PEM.

View 7 Replies View Related

Apache :: OpenSSL - Cannot Open Config File

Feb 24, 2015


WARNING: can't open config file: c:/openssl-1.0.1e-X64/ssl/openssl.cnf


View 1 Replies View Related

Network - DNS Lookup Error At Random Times

Sep 27, 2009

I regularly have DNS issues with some of my sites hosted with a specific host... At random sites, the urls done resolve and I get a DNS error.
Just to find out that a few hours later it loads again without issues...

I always thought it had something to do with my ISP... My host says that there's nothing wrong with their DNS.
However, I asked a few people now and it seems they're having DNS problems too sometimes when accessing the problematic urls...

View 6 Replies View Related

Can't Post With @ Symbol

Sep 14, 2006

I am running on a VPS system, and I have some auction software and I run Vbulletin as well..

When someone trys to do a Private MEssage via Vbulletin using anything with the @ in it.. Like an e-mail address. And hit submit, it says " /private.php access is denied.

But it also does it when I post news in the auction site. Which leads me to believe their is something screwed up with one of the server settings.. But I dont know what?

View 6 Replies View Related

Undefined Symbol: XmlTextReaderSchemaValidate

Jan 21, 2008

I triad to make restart for my Apache I have this result:

PHP Code:




View 1 Replies View Related

Htaccess :: Rewrite A Hash # Or Other Symbol To A Question Mark

Oct 29, 2009

I simply want to rewrite a hash # or other symbol to a question mark via htaccess. So any hash in the URL anywhere should internally rewrite to a ?. All I want is to remove ? from the URL really.

View 2 Replies View Related

Update Openssl

Jul 2, 2008

No Control Panel
Current Version of OpenSSL = OpenSSL 0.9.7a Feb 19 2003
which is the most current version available via 'up2date'.

Need to update to 0.9.8.

I have download the source for 0.9.8h and have:
#./config --prefix=/usr/local --openssldir=/usr/local/openssl
#make test
#make install

All commands ran without errors.

When I run:
# openssl version
OpenSSL 0.9.7a Feb 19 2003

# whereis openssl
openssl: /usr/bin/openssl /usr/local/bin/openssl /usr/include/openssl /usr/local/openssl /usr/share/man/man1/openssl.1ssl.gz

# rpm -qa | grep openssl

How can I get the version updated?

View 7 Replies View Related

The Best Way To Update Openssl

Mar 21, 2008

what is the best way to upgrade Openssl

to the latest version


in my cpanel server
openssl version
OpenSSL 0.9.7a Feb 19 2003

View 9 Replies View Related

Upgraded To Openssl 0.9.8g But Now Can't Get PHP To Build

Feb 22, 2008

I might still be a bit too close to the newbie level to be trying this
but I wanted upgrade various components of my cpanel install for security issues.

So I got openssl to update to 0.9.8g and that seemed to be working correctly.


openssl version
OpenSSL 0.9.8g 19 Oct 2007

So now I am trying to build PHP 4.4.8 like this:


./configure --with-litespeed --with-config-file-path=../php --with-mysql=/usr --with-zlib --with-zlib-dir=.. --with-gd --with-jpeg-dir=.. --with-png-dir=.. --enable-shmop --enable-track-vars --enable-sockets --enable-sysvsem --enable-sysvshm --enable-magic-quotes --with-openssl

And it fails because of the openssl:


In function `zif_openssl_seal':
/php-4.4.8/ext/openssl/openssl.c:2885: undefined reference to `EVP_CIPHER_CTX_block_size'
collect2: ld returned 1 exit status

(I tried --with-openssl=/usr with no change)

View 4 Replies View Related

OpenSSL - CURL, Httpd And Proftpd

Apr 14, 2009

so I got OpenSSL 0.9.8k up and installed, no issued:


# openssl
OpenSSL> version
OpenSSL 0.9.8k 25 Mar 2009

Rebuilt cURL (and then php), httpd and proftpd but all of them are still linking to the older libraries for some reason


# curl -V
curl 7.19.4 (x86_64-unknown-linux-gnu) libcurl/7.19.4 OpenSSL/0.9.8g zlib/1.2.3
Protocols: tftp ftp telnet dict ldap http https ftps
Features: IPv6 Largefile NTLM SSL libz


[Tue Apr 14 00:11:03 2009] [notice] Apache/2.2.11 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.8g DAV/2 PHP/5.2.9 Apache configured -- resuming normal operations


Starting proftpd: - mod_tls/2.2.1: compiled using OpenSSL version 'OpenSSL 0.9.8i 15 Sep 2008' headers, but linked to OpenSSL version 'OpenSSL 0.9.8g 19 Oct 2007' library

proftpd has its own set of issues obviously built with i headers and linked to g headers. Any ideas wtf I did? I recomplined and restarted everything. I removed the g and i libraries completely. OpenSSH seems happy and nothing is actually "wrong", the server is working fine but I'm really anal retentive this way...it's kinda how I feel "safer" at the OS level.

View 3 Replies View Related

OpenSSL Dll Files - Total Commander 7 - SFTP

Jun 13, 2007

I'm trying to connect to the server via SFTP but when I check the box to do that in Total Commanders settings box it says I need the OpenSSL dll's. I downloaded the must current file from [url] but I can't find any dll files in it and I'm unsure how to proceed.

View 1 Replies View Related

Apache :: Configuration Error Causing Internal Server Error

Oct 10, 2012

- Apache version : 2.2.21
- operating system : MAC OS Lion Server
- mod_ssl : 2.2.21

I have a certain area on a homepage which is protected by an .htaccess file. The code of the .htaccess file is the following:


AuthType Digest
AuthName "Password Required"
Options +Indexes
# code for HTTPS
RewriteEngine On
%{SERVER_PORT} !^443$
RewriteRule (.*) https://%{SERVER_NAME}%{REQUEST_URI}
Require valid-user

Usually everything has been working fine with this .htaccess-file until today. There hasn't been any change on the system.

If you click on the hyperlink to the restricted area the login window appears where you need to type in your username and a password. After typing in these data the following message appears in the browser:

500 Internal Server Error

The server encountered an internal error or
misconfigruation and was unable to complete your request. (…)

The apache error log file contains the following message:

Request exceeded the limit of 10 sub request nesting levels due to probable configuration error.

Use 'LimitInternalRecursion' to increase the limit if necessary.
Use 'LogLevel debug' to get a backtrace.

The increase of the LimitInternalRecursion does not solve the problem. So I switched the LogLevel in the httpd.conf file from warn to debug and looked again on the entries of the error log.

The following appeared (I have replaced ip addresses, usernames and URL by xyz or <URL>) :


[error] [client xyz]
mod_digest_apple: Client is using a nonce not issued by this server for this context:/rb/Vorlesung/WS12/Downloads/, referer:

[Code] ....

View 3 Replies View Related

Reverse DNS Lookup ...

May 5, 2008

if I do a reverse lookup on my server's IP it returns a host assigned by the data center. So is this something I should even be managing too or is that always left up to the DC? I run my own DNS for the forward lookup zones.

Also just a technical question, when you do a reverse lookup, how does it know where to look to get the host? I'm not sure I fully understand how these work.

View 11 Replies View Related

Name Server Lookup

Jan 13, 2008

Somebody purchased a domain from a popular registrar. When you lookup the domain, it points to its own name servers (i.e. ns1.registrar.com and ns2.registrar.com), which means that it is hosted by them as well. correct?

this person is saying they bought their domain from the registrar, but they are hosted by company X. he says that he is pointing the ip address of his web site on company X to his registrar.

View 7 Replies View Related

DNS Lookup Explanation

Mar 14, 2007

I want to know how serious following nameserver problem can be in reality:
[url] ?

From DNS timing someone could conclude it's a slow hosting.

Can anyone explain above results "accurately" ? I still don't know what's "good" result in DNS timing: A or F?

The problem is that
[url] loads slow (5-10 seconds on T1 connection), here's a speed test. I'm aware images and scripts contribute to slow site loading.

My question is: Beside removing some images from the Home page, is it any reason to change the hosting (regarding DNS tests).

View 2 Replies View Related

CURL Named Lookup

Sep 26, 2007

Friend of mine asked me what "CURL named lookup issue resolved" means, he's got a CentOS 4 machine, with cPanel/WHM latest builds I tried recompiling apache and even cPanel at some point but no good..

View 1 Replies View Related

Hostname/dns Lookup And Exim.

May 28, 2007

I am having a problem. My server was able to ping google.com successfully before installing DirectAdmin.

However after installing DirectAdmin, I am no longer able to ping google.com anymore. I just get a host cannot be found error. This is the same with all other domains.

The /etc/resolv.conf is exactly the same, so I do not know the issue. I also have other servers using the same nameserver and are still able to ping and resolve successfully.

The main problem here is that exim no longer can send email as it cannot lookup the hostnames.

the error from exim is: R=lookuphost defer (-1): host lookup did not complete.

Thats the only error within the message.

View 6 Replies View Related

Relaying Denied. IP Name Lookup Failed [xx.xxx.xx.xxx]

Nov 17, 2006

My VPS Config:
centos with webmin
mail program sendmail

Its a newly configured VPS have a problem with smtp realying through outlook and other smtp programs. When i use smtp on outlook it give following error:

The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'xxxxx@yahoo.com'. Subject 'Outlook', Account: 'Testing', Server: 'xxxx.com', Protocol: SMTP, Server Response: '550 5.7.1 <xxxxx@yahoo.com>... Relaying denied. IP name possibly forged [xx.xxx.xx.xxx]', Port: 25, Secure(SSL): No, Server Error: 550, Error Number: 0x800CCC79

I want to make outgoing authentication activate instead of allowing some iprange or domain for relaying through /etc/mail/access.

View 4 Replies View Related

MySQL DNS Lookup Delay - Internal IP

May 30, 2009

I have six dedicated servers on a VPR. I use one of these as the Database server and the other five connects to that server to read the Database.

When I setup my scripts for the first time I used the external IP to connect to the DB server. Everything worked perfect for these weeks:

mysql_connect('174.xxx.xxx.xx', 'user', 'pass');

Since three days ago I finally received the internal IPs of my servers and now I use the internal IP of the DB server:

mysql_connect('', 'user', 'pass');

When I did this last change this my database started to collapse. Queries stuck on a bottleneck every 10 minutes. Here's an example:

40468 simon pkindigo_db Query 115 Locked update `captured` set hp_left = '79', status = 'normal', att1pp = '25', att2pp = '30', att3p
40523 simon pkindigo_db Query 115 Locked update `captured` set experience = '5120', level = '16', hp_left = '58', hp = '58', status =
... (tons of locked queries before) ...

As you may see table is locked since 115 seconds for a simple update... after some hours this ends on a "#1135 - Can't create a new thread (errno 13); if you are not out of available memory, you can consult the manual for a possible OS-dependent bug" and even some of my tables finally crashing.

I think that my Database stuck because of a DNS lookup delay. When I had this problem before using the external IPs, I added skip-name-resolve and the problem was fixed. But now with the internal IPs it seems that's not enough.

View 2 Replies View Related

Bind DNS Reverse Lookup File

Aug 3, 2009

I'm having tons of problems trying to get reverse lookup working on my dns server. I've scoured the net and tried lots of methods but so far none work.

Forward lookup DNS is working perfect, but reverse lookup is completely broken.


$TTL 86400 ; Default TTL in secs(1 day)
@ IN SOA ns1.capturetheprize.com. info.capturetheprize.com. (

2009072902; serial number YYMMDDNN
28800 ; Refresh
7200 ; Retry
864000 ; Expire
86400 ; Min TTL

IN NS ns1.capturetheprize.com.
IN NS ns1.mytempmail.com.

; Reverse lookups
44 IN PTR ns2.mytempmail.com.
44 IN PTR ns1.mytempmail.com.
44 IN PTR ns2.capturetheprize.com.
44 IN PTR ns1.capturetheprize.com.
44 IN PTR mail.mytempmail.com.
44 IN PTR mail.capturetheprize.com.
44 IN PTR stats.capturetheprize.com.
44 IN PTR secure.capturetheprize.com.

zone "80.212.67.in-addr.arpa" IN {
type master;
file "etcdb.";
allow-transfer { localhost; };

View 3 Replies View Related

Changing Host Name Or Reverse Lookup

Jul 19, 2008

if its possible to change the reverse lookup, or at least i think thats what it is called.

I have 2 accounts on my CentOS, WHM/cPanel VPS and they are hosted on their own seperate IPs however when you do a lookup on one domain it also lists the other domain as being hosted on the server and vice-versa.

How do i change this so they appear like they are on different servers? Each one has their own nameservers which are on seperate IPs also.

View 3 Replies View Related

MySQL DNS (Domain Name Server) Lookup

Feb 18, 2008

My MySQL server slowed down to a crawl a few days ago, and I finally fixed it by starting it without DNS lookups via "--skip-name-resolve".

I tested domain name resolution on the MySQL machine and it was able to return IPs from domains rather quickly, so I'm at a loss as to why DNS was the problem here? I am using "" as the MySQL server's IP, in case that matters?

I have a couple of questions:Why is DNS resolution so slow when in the command line it's running normally?

Why does MySQL need to do DNS lookups at all? I don't see any log files that's converting IPs to host names or vice versa.

View 3 Replies View Related

Where Are My E-mails Sent From? Should I Create Reverse Ip Lookup

May 11, 2007

Where am I sending e-mails from with the below settings:

(Is it mail.freesexdoor.com, www.freesexdoor.com, or

My secondary question is: Is creating own reverse IP lookup to possible and beneficial in my case? If so, what should I replace this SPF line with: freesexdoor.com. TXT "v=spf1 a mx ip4: ?all"?

I'm trying to improve freesexdoor.com's e-mail delivery ratio because hotmail and gmail deliver my PHP mailer's sent confirmation e-mails to the junk folder. I've done everything I can to improve the sent headers etc. so there's only one more possible way to improve it: (That I can think of). Freesexdoor.com is hosted on the same server as mitorahgames.com.

DirectAdmin control panel on CentOS 4.4.

My server's primary IP is:
My server's hostname is: server.mitorahgames.com

server.mitorahgames.com's Related DNS Settings:
server.mitorahgames.com.TXT"v=spf1 a mx ip4: ?all"

freesexdoor.com's IP is:
freesexdoor.com's Related DNS Settings:

freesexdoor.com.TXT"v=spf1 a mx ip4: ?all"

I'm by the way putting www.freesexdoor.com (PHP reported server name) to the Message ID: field in the e-mail headers. Would putting IP there perhaps work better? If so, which IP?

View 1 Replies View Related

How To Hide DNS Info On WHOIS Lookup

May 18, 2007

I want to hide my NS records on WHOIS lookup, or show a fake or something so that no one can find me, Is it possible,

View 5 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved