Nameserver Setup On New Server

Aug 14, 2008

I've just installed whm on my new server at leaseweb and wanted to know what nameservers I should put down in whm?

Is it ns1.localdomain.com or ns1.leaseweb.nl?

I suppose I can't set nameservers for my own domain since I've only got one Ip and I would need 2?

View 11 Replies


ADVERTISEMENT

Nameserver Setup

Aug 21, 2007

I recently moved hosts and also decided to use what I hope is a more reliable DNS / nameserver setup. So I signed up at everydns.net. I surfed and read for hours and got more confused the more I read.

I finally set up my accounts with the corresponding records as follows:

*.mysite.com CNAME mysite.com
mysite.com A 123.123.123.123
mysite.com MX (10) 1mail.mysite.com
www.mysite.com A 123.123.123.123

My questions are:

1 - Is this pretty much right?
2 - should I have a second MX recored like:
mysite.com MX (10) 2mail.mysite.com

I'm using 4 nameservers >> ns1.everydns.net, ns2.everydns.net, ns3.everydns.net, ns4.everydns.net,

View 1 Replies View Related

Nameserver Setup

Aug 11, 2007

I just purchased my first dedicated server. It comes with WHM 11.2.0 / CentOS Enterprise 5 i686.

Could someone please refer me to a guide to setup the nameservers? I've tried to follow some guides i found on google but still I can't get websites to resolve.

How do I know my nameservers are working? When I ping them they display the proper IP's and when I enter them in a browser it goes to the cpanel default site that it should but when I park domains to them, they don't work.

Could someone please maybe give me a guide for WHM 11.2.0? Also, some of the guides said to modify /etc/resolv.conf and /etc/nameserverips. I did modfiy /etc/resolv.conf to my information.

If it would make it easier, pretend i'm trying to add ns1.domain.com and ns2.domain.com as nameservers with the hostname server.domain.com and domain name domain.com. I want ns1.domain.com on ip 74.47.74.47 and ns2.domain.com on ip 74.47.74.48. What would /etc/resolv.conf look like after and what would /etc/nameserverips look like after? And what are the steps to take in WHM to set it up?

View 3 Replies View Related

How To Setup A Nameserver For A Webhost

Jun 19, 2009

I hope I posted on the right section..

I have setup ISPconfig on a VPS (that was given to me for free)..

I have one dedicated IP, and I used a .co.cc domain to access my server..

now, my question is, how do I setup name server? what name server should I use to point the domains that I will host on my server?

View 5 Replies View Related

Cpanel Nameserver Setup

Feb 21, 2007

Sorry if this sounds confusing its my first time. So i have an account at ev1servers.net/theplanet.com when i signed up i was asked for a domain i could use for the servers main domain which we'll call maindomain.com, my question is when you setup private nameservers do they have to be setup for the main domain e.g. ns1.maindomain.com, ns2.maindomain.com? What i did was setup the name servers for a domain account on my server and i couldn't get it to work which leads me to believe it has to be the main domain.

View 14 Replies View Related

Nameserver,hostname, DNS Setup...

Nov 3, 2007

I currently have a domain registered at godaddy.com

the domain is NDSuniverse.com

I've ordered a VPS at skodagroup.com, they given me WHT VPS Pro, Cpanel, LXadmin contrtol panel.

quote from e-mail
Custom DNS Server Addresses
=============================
The custom DNS addresses you should set for your domain to use are:
Primary DNS: ns1
Secondary DNS: ns2

You will have to login to your registrar and find the area where you can specify both of your custom name server addresses.

After adding these custom nameservers to your domain registrar control panel, it will take 24 to 48 hours for your domain to delegate authority to your DNS server. Once this has taken effect, your DNS server has control over the DNS records for the domains which use your custom name server addresses.

they didn't give me any nameserver DNS....

How can i get my domain hosted onto my VPS asap? Step by step instructions really needed. thank you.

Also, i have 2 free IPS.

View 7 Replies View Related

Setup Nameserver - 1and1 VPS + Netfirms Registrar

Nov 18, 2008

I am wondering how to set up a nameserver on my new VPS with 1and1.

I have all my domains hosted on netfirms.

This is what I have done, but doesnt seem to be working:

i have a domain ex: mycompany.com on netfirms and i created an A Record that is ns1.mydomain.com that points to the ip of the VPS ex: 55.55.55.55

I have also created an ns2.mydomain.com. I did this through the netfirms control panel

Is there anything else i need to do?

View 4 Replies View Related

Plesk 12.x / Linux :: Caching Bind Nameserver Setup

Aug 20, 2014

I would like to setup a caching Bind nameserver for which I need to modify the file /etc/named.conf. The file is automatically created by Plesk however and I am unable to find information on how to modify the file in Plesk.

Code:
#ATTENTION!
#
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED.
// $Id: named.conf,v 1.1.1.1 2001/10/15 07:44:36 kap Exp $

Any way to modify named.conf?

View 1 Replies View Related

Should I Add 2nd Nameserver IP On Server

Apr 4, 2009

My provider just gave 1 IP and to be use as shared IP for every accounts created in the server. I also assigned that IP for my nameserver ns1.domain.com at my registrar.

I was instructed also by my provider to use the next IP for the second nameserver which I also created at my registrar and created dns zone at the whm. All of the domains using that two IPs are working but I dont know why when I ping the second dns its not working. from Intodns.com its also showing nameserver 2 as an error..

My question is, do I need to add the second IP on the server/whm? you see when I go to WHM and click Show IP Address Usage I only see the first IP shared to all other domains. Somehow I'm expecting to see the second IP on the screen.

Anyone can enlighten me? the server I got should have been a full management but my provider is somehow responding so slow.

View 4 Replies View Related

Using My Web Server As Its Own Nameserver

Jan 4, 2008

I use my web server as its own nameserver. I know the potential draw backs of this, but it works fine for me.

I have recently moved server and need to configure my new server to work as my nameserver.

I use one of the server administration companies people talk about here, but they seem to be unable to configure this for me. As a result my server is down (can't be reached due to nameserver issues).

Does anyone know off hand how I can do this myself?

View 3 Replies View Related

Dedicated Server Nameserver And Named DNS

Feb 10, 2008

I purchased a new dedicated server out of Canada and received my login and IPs. I added them, setup WHM, updated WHM to newest version along with PHP 5.25, Mysql 5.0 and set it up to the best of my knowledge and transferred all my accounts from my previous semi-dedicated WHM. I have my own nameservers with Tucows register and transferred the new IPs on Friday at 2:00 pm CST. It is now sunday at 6pm CST and they seem to have propagated i think, but DNSreports still show errors on lucentone.com and ns1.lucentone.com. I checked all files in /etc folder and even did the rndc fix for WHM and Restarted Bind.

i went back in after contacting datacenter to ask them to help me and they dont know what could be wrong. I have no managed support on my Box but i know some linux and CPanel but never setup DNS, IPs and a Cpanel from scratch install with the zone files, this was my first time. Frustrated with this whole thing and staying up until 4am trying to fix these problems for the past 2 days. i finally got fed up as all my customers accounts are down and decided to do another updating of WHM and found that now my Dig has authorative records, but still DNSrepot and others are showing still problems with my nameservers. There has to be something still wrong. I dont know if i have the localhost set correctly as i have also added a S01.lucentone.com for my server host.

Maybe this is the problem, but i have never done this before. Can anyone help me with this?

If anyone could help me, this would be much appreciated. i am about to pull my hair out. :-)

Here is my Dig now:; <<>> DiG 9.3.3rc2 <<>> lucentone.com @ns1.lucentone.com
; (1 server found)
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 18477
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2

;; QUESTION SECTION:
;lucentone.com. IN A

;; ANSWER SECTION:
lucentone.com. 400 IN A 206.53.55.246

;; AUTHORITY SECTION:
lucentone.com. 400 IN NS ns2.lucentone.com.
lucentone.com. 400 IN NS ns1.lucentone.com.

;; ADDITIONAL SECTION:
ns1.lucentone.com. 400 IN A 206.53.55.238
ns2.lucentone.com. 400 IN A 206.53.55.237

;; Query time: 0 msec
;; SERVER: 206.53.55.238#53(206.53.55.238)
;; WHEN: Sun Feb 10 17:49:44 2008
;; MSG SIZE rcvd: 115
-------------------------------------------------------------------
and here is my Dnsreport and dnsreport.com. Still shows problems, but most of them pass except nameservers:

FAILLame nameserversERROR: You have one or more lame nameservers. These are nameservers that do NOT answer authoritatively for your domain. This is bad; for example, these nameservers may never get updated. The following nameservers are lame:
206.53.55.238
206.53.55.237
PASSMissing (stealth) nameserversOK. All 0 of your nameservers (as reported by your nameservers) are also listed at the parent servers.

FAILMissing nameservers 2ERROR: One or more of the nameservers listed at the parent servers are not listed as NS records at your nameservers. The problem NS records are:
ns1.lucentone.com.
ns2.lucentone.com.

FAILStealth NS record leakageYour DNS servers leak stealth information in non-NS requests:

Stealth nameservers are leaked [D.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [E.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [F.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [G.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [H.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [I.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [J.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [K.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [L.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [M.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [A.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [B.ROOT-SERVERS.NET.]!
Stealth nameservers are leaked [C.ROOT-SERVERS.NET.]!

This can cause some serious problems (especially if there is a TTL discrepancy). If you must have stealth NS records (NS records listed at the authoritative DNS servers, but not the parent DNS servers), you should make sure that your DNS server does not leak the stealth NS records in response to other queries.
SOA FAILSOA RecordNo valid SOA record came back:
(root) is not lucentone.com.

View 1 Replies View Related

Nameserver On Server W/o Control Panel

Feb 27, 2007

I'm used to setting up the nameserver using a control panel (directadmin)

but how do you do it on a server without a control panel?

So far I figured that you just

set up 2 ip addresses in your registrar to use as nameservers

and then

edit /etc/named.conf and put the path to the zone file and of course set up the zone file /var/named/nameofzonefile.db

then service named restart

are these steps correct? am I missing anything?

View 1 Replies View Related

Nameserver Cluster And Virtual Private Server (VPS)

Jul 11, 2009

Could nameservers be setup in cpanel/WHM between multiple VPS so they could be used across them all or would that require dedicated servers?

View 5 Replies View Related

Domain Name Server/Nameserver/host Name Issue

Aug 14, 2007

Well, the ns1.NAME.com and ns2.NAME.com is done. It works and links to the right place.

My host name is "dog.NAME.com" and links to the main server IP (example 1.1.1.1). So when i try to do this:
1.1.1.1/~NAME, it redirects me to dog.NAME.com which is good but then dog.NAME.com can't be found.

Server not found is the exact error i get. The IP works. i don't know what i am doing wrong.

My host said they will charge me to fix it, so i am relaying on you guys to save me money.

View 2 Replies View Related

Can A Nameserver Be Specified In An A Record By Another Nameserver

Apr 4, 2008

1) I use DNSMadeEasy for a couple of my important domains so I can utilize their failover service.

2) I use my own nameservers for everyone else.

At my register (GoDaddy) I've added host entries to my domain (let's call it host.com) for ALL of my nameservers: DNSMadeEasy and mine. For example here are my host entries:

1) nsdme0.host.com = 55.55.55.55 (DNSMadeEasy)
2) nsdme1.host.com = 56.55.55.55 (DNSMadeEasy)
3) nsdme2.host.com = 57.55.55.55 (DNSMadeEasy)
4) nsdme3.host.com = 58.55.55.55 (DNSMadeEasy)
5) nsdme4.host.com = 59.55.55.55 (DNSMadeEasy)
6) ns1.host.com = 60.55.55.55 (mine)
7) ns2.host.com = 61.55.55.55 (mine)

At the register I've then configured host.com to use the first five nameservers for itself, the DNSMadeEasy nameservers.

For less critical sites that I host I simply point them to ns1.host.com and ns2.host.com, my nameservers.

Now, here's the twist. If I use dig to look up www.host.com I get:

[root@lax1 ~]# dig +trace www.host.com

; <<>> DiG 9.3.3rc2 <<>> +trace www.host.com
;; global options: printcmd
. 220048 IN NS D.ROOT-SERVERS.NET.
...........................................
. 220048 IN NS K.ROOT-SERVERS.NET.
;; Received 228 bytes from 66.63.160.2#53(66.63.160.2) in 1 ms

net. 172800 IN NS J.GTLD-SERVERS.net.
...........................................
net. 172800 IN NS G.GTLD-SERVERS.net.
;; Received 497 bytes from 128.8.10.90#53(D.ROOT-SERVERS.NET) in 74 ms

host.com. 172800 IN NS nsdme0.host.com.
host.com. 172800 IN NS nsdme1.host.com.
host.com. 172800 IN NS nsdme2.host.com.
host.com. 172800 IN NS nsdme3.host.com.
host.com. 172800 IN NS nsdme4.host.com.
;; Received 225 bytes from 192.48.79.30#53(J.GTLD-SERVERS.net) in 125 ms

www.host.com. 1800 IN CNAME host.com.
host.com. 75 IN A 60.55.55.55
host.com. 86400 IN NS nsdme2.host.com.
host.com. 86400 IN NS nsdme1.host.com.
host.com. 86400 IN NS nsdme5.host.com.
host.com. 86400 IN NS nsdme0.host.com.
host.com. 86400 IN NS nsdme4.host.com.
host.com. 86400 IN NS nsdme3.host.com.
;; Received 276 bytes from 123.123.123.123#53(nsdme0.host.com) in 68 ms
BUT, if I lookup the nameserver (ns1.host.com) I get:

Code:
[root@lax1 ~]# dig +trace ns1.host.com

; <<>> DiG 9.3.3rc2 <<>> +trace ns1.host.com
;; global options: printcmd
. 218964 IN NS M.ROOT-SERVERS.NET.
...........................................
. 218964 IN NS K.ROOT-SERVERS.NET.
;; Received 228 bytes from 66.63.160.2#53(66.63.160.2) in 1 ms

net. 172800 IN NS H.GTLD-SERVERS.net.
...........................................
net. 172800 IN NS G.GTLD-SERVERS.net.
;; Received 497 bytes from 202.12.27.33#53(M.ROOT-SERVERS.NET) in 115 ms

ns1.host.com. 172800 IN A 60.55.55.55
host.com. 172800 IN NS nsdme0.host.com.
host.com. 172800 IN NS nsdme1.host.com.
host.com. 172800 IN NS nsdme2.host.com.
host.com. 172800 IN NS nsdme3.host.com.
host.com. 172800 IN NS nsdme4.host.com.
;; Received 241 bytes from 192.54.112.30#53(H.GTLD-SERVERS.net) in 151 ms

What I've realized is that the actual IP addresses for nameserver host entries come from a higher level server than my own, in this case H.GTLD-SERVERS.net. I guess this makes sense but I just hadn't realized it before. It looks like I don't even need to have record entries in my DNS records for the host nameservers.

Now for the question. Can I:

1) Remove my custom host nameserver entries from my register.

2) Add entries in my DNSMadeEasy records to specify the location of ns1.host.com and ns2.host.com.

3) Use the failover provided by DNSMadeEasy to also fail-over my DNS entries for my nameservers?

I know this would require one more hop if it works but it would allow me to provide failover ability to fifty domains without having to purchase the extra domains at DNSMadeEasy.

View 2 Replies View Related

Plesk 12.x / Linux :: DNS Manager - Managing All Server With Single Nameserver

Aug 23, 2014

I have many server with Plesk 12...in this server I have single nameserver...example server number 1 have ns1.domain.com and ns2.domain.com - server number 2 have ns1.tldnames.com ns2.tldnames.com etc etc...

Now I want manage all server with single nameserver example all server working with ns1.newnameserver.com and ns2.newnameserver.com ....

I have licenses for my server of Plesk no limits...how check if PPA is installed in my server ? Otherwise how to install PPA or other software for DNS Manager?

View 8 Replies View Related

File Server Setup With Nginx...how Do I Choose The Config For The Server

Apr 22, 2009

I just want to use a server for file sharing, it will have nginx and that's it. I'm looking at centos, or freebsd, but I been using centos forever now and I'm not sure how to use freebsd, should I just stay with centos?

Do I tell my hosting provider to just install the OS and give me ssh action and that's it? Don't install any control panels or any other stuff? I want one domain and one subdomain on it though and ftp action.

View 8 Replies View Related

Mail Server Setup On Fedore Core 6 Server

Jan 1, 2008

for setup and configuration instructions for setting up mail server on a Fedora Core 6 server. I googled it and most of the links are described with steps while installing OS, but i need to configure a mail server on a server where my site is already running.

View 1 Replies View Related

Dedicated Or Reseller Setup With Virtualization Or Decent Chroot Setup

Jul 31, 2008

As my clients' needs expand, they're asking for chroot ssh/sftp setup. I'm currently on a dedicated Linux setup but don't really have the time to set up a whole new box with full virtualization or investigate a full chroot solution (baby on the way), and to be honest it would be less hassle to move to a new provider than worry about down time with sites.

What I'm looking for:

- linux hosting
- hosting for 30+ accounts, some with several domains
- at least 6 IP addresses for SSL certs
- each account in a full chroot environment (ssh/sftp/ftp) so they can't poke around each others' files, or each account set up in a virtual machine setup (ie: openvz)
- maildir
- spamassassin
- php 5, mysql, perl 5.8.8
- suexec apache would be nice

View 3 Replies View Related

How To Setup Domain Name Server For Multiple Server?

Sep 16, 2006

I have 1 server so I setup dns as ns1.mydomain.com, ns2.mydomain.com ip address pointed to server1. So, now I just bought another server. Can I setup ns2.mydomain.com pointed to 2nd server. Also how to setup more servers ie. 10, 20 server because I can only set up to 6 dns in one domain name.

View 8 Replies View Related

Setup A OpenVPN Server On A Trixbox Server

Jun 12, 2008

to setup a OpenVPN server on a Trixbox Server I'm running and tell us how to setup a Linksys router running DD-WRT Firmware to connect as a client. We need to make it so remote Cisco IP phones can connect to Trixbox.

View 0 Replies View Related

Web Server Setup VPS

May 7, 2009

I've registered a new domain name and 'hired' a Virtual Private Server (not managed) to host it. I know 'some things' in php and web design but I'm newbie with configuring servers (especially remotely on a Linux server.... )...

This is what I've done so far :

1. registered domain name at namecheap.com and set up DNS there (my VPS server names)

2. I've installed Linux Ubuntu 8.04 on my VPS

3. I've downloaded and installed XAMPP 1.7.1 on my VPS

I've registered my domain name yesterday and it is still 'invisible' when I type in the address... BUT when I type in my VPS's IP address, the XAMPP welcome screen appears (MySql isn't running though...).

I know this is a child's play for a Linux expert, please if someone knows a good tutorial, step-by-step guide on how do I set up everything to work properly....

View 14 Replies View Related

Web Server Setup VPS

May 7, 2009

I've registered a new domain name and 'hired' a Virtual Private Server (not managed) to host it. I know 'some things' in php and web design but I'm newbie with configuring servers (especially remotely on a Linux server.... )...

This is what I've done so far :
1. registered domain name at namecheap.com and set up DNS there (my VPS server names)

2. I've installed Linux Ubuntu 8.04 on my VPS

3. I've downloaded and installed XAMPP 1.7.1 on my VPS

I've registered my domain name yesterday and it is still 'invisible' when I type in the address... BUT when I type in my VPS's IP address, the XAMPP welcome screen appears (MySql isn't running though...).

View 6 Replies View Related

How To Setup My Server

Jun 8, 2008

i recently bought a Dell SC440, quite basic configured, the thing is that it came without (OS) so i downloaded (CentsOS) as my OS.

My question here is, i want to setup my server in order to host 15 of my domains and would like to have it setup like the (Lunarpages)
account that i have at the moment with them is that possible?

what OS i should get to start the installation.

View 5 Replies View Related

Setup FTP Server

May 15, 2008

if I could assist his small company in setting up an FTP server. What they are looking to do is provide a way for people to login and access files. They can either bring down the files that are left for them or they can upload files. Is setting up an FTP server difficult? Is it time consuming? Can you customize it so that certain files can only be seen for specific usernames?

View 3 Replies View Related

How Can I Setup A New Server With No OS And No CD Bay

Jun 24, 2008

I've been charged with setting up a new Dell PowerEdge server, but it arrived with no default OS and no CD/DVD bay! Any ideas on how I can get an OS on here? Are there any linux builts suitable for booting off of a USB thumb drive for this purpose?

View 2 Replies View Related

Server Setup

Feb 28, 2008

I installed Windows Server 2003 on a spare computer, Pentium 4 2.00GHz 760 MB of Ram. I have been looking allover google on how to setup a DNS server so that I can run my Clothing Companies website from home. Are there any guides that can help me from setting up DNS server to having the website appear online? I have been trying to set up this server for about a week now and still no luck. when I ping 68.109.88.131 it comes back successful and when I enter that in, in a url, the "Under Construction" page comes up.

View 4 Replies View Related

Server Setup

Dec 19, 2007

lot of questions about a server setup i whant to now some things if you can tell me fanks it is a systeem with linux os

1 if you have 2 cpu's in your server and one is broken, can i replace it easy?
do the server still work on one cpu? can i take the broken cpu out and put a new one in and still the server work when i do this?

2 What for backup option i have when the raid card is broken?
can i install software there for that the software take over.
or must i put 2 raid cards in the server?

3 wich software i need when i whant raid software ( not a raid card )?
raid 5 with hotspar and for linux os or raid 1 with hotspar

4 when a raid card have a cpu with the speed 566 mhz and i have 2 cpu 2.0 ghz and i only whant to work with raid software can i than fink that i take about 566 mhz from the 2 cpu and the rest is for the server or to the software need to take more from my cpu's

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved