Nameserver Setup
Aug 11, 2007
I just purchased my first dedicated server. It comes with WHM 11.2.0 / CentOS Enterprise 5 i686.
Could someone please refer me to a guide to setup the nameservers? I've tried to follow some guides i found on google but still I can't get websites to resolve.
How do I know my nameservers are working? When I ping them they display the proper IP's and when I enter them in a browser it goes to the cpanel default site that it should but when I park domains to them, they don't work.
Could someone please maybe give me a guide for WHM 11.2.0? Also, some of the guides said to modify /etc/resolv.conf and /etc/nameserverips. I did modfiy /etc/resolv.conf to my information.
If it would make it easier, pretend i'm trying to add ns1.domain.com and ns2.domain.com as nameservers with the hostname server.domain.com and domain name domain.com. I want ns1.domain.com on ip 74.47.74.47 and ns2.domain.com on ip 74.47.74.48. What would /etc/resolv.conf look like after and what would /etc/nameserverips look like after? And what are the steps to take in WHM to set it up?
View 3 Replies
ADVERTISEMENT
Aug 21, 2007
I recently moved hosts and also decided to use what I hope is a more reliable DNS / nameserver setup. So I signed up at everydns.net. I surfed and read for hours and got more confused the more I read.
I finally set up my accounts with the corresponding records as follows:
*.mysite.com CNAME mysite.com
mysite.com A 123.123.123.123
mysite.com MX (10) 1mail.mysite.com
www.mysite.com A 123.123.123.123
My questions are:
1 - Is this pretty much right?
2 - should I have a second MX recored like:
mysite.com MX (10) 2mail.mysite.com
I'm using 4 nameservers >> ns1.everydns.net, ns2.everydns.net, ns3.everydns.net, ns4.everydns.net,
View 1 Replies
View Related
Jun 19, 2009
I hope I posted on the right section..
I have setup ISPconfig on a VPS (that was given to me for free)..
I have one dedicated IP, and I used a .co.cc domain to access my server..
now, my question is, how do I setup name server? what name server should I use to point the domains that I will host on my server?
View 5 Replies
View Related
Aug 14, 2008
I've just installed whm on my new server at leaseweb and wanted to know what nameservers I should put down in whm?
Is it ns1.localdomain.com or ns1.leaseweb.nl?
I suppose I can't set nameservers for my own domain since I've only got one Ip and I would need 2?
View 11 Replies
View Related
Feb 21, 2007
Sorry if this sounds confusing its my first time. So i have an account at ev1servers.net/theplanet.com when i signed up i was asked for a domain i could use for the servers main domain which we'll call maindomain.com, my question is when you setup private nameservers do they have to be setup for the main domain e.g. ns1.maindomain.com, ns2.maindomain.com? What i did was setup the name servers for a domain account on my server and i couldn't get it to work which leads me to believe it has to be the main domain.
View 14 Replies
View Related
Nov 3, 2007
I currently have a domain registered at godaddy.com
the domain is NDSuniverse.com
I've ordered a VPS at skodagroup.com, they given me WHT VPS Pro, Cpanel, LXadmin contrtol panel.
quote from e-mail
Custom DNS Server Addresses
=============================
The custom DNS addresses you should set for your domain to use are:
Primary DNS: ns1
Secondary DNS: ns2
You will have to login to your registrar and find the area where you can specify both of your custom name server addresses.
After adding these custom nameservers to your domain registrar control panel, it will take 24 to 48 hours for your domain to delegate authority to your DNS server. Once this has taken effect, your DNS server has control over the DNS records for the domains which use your custom name server addresses.
they didn't give me any nameserver DNS....
How can i get my domain hosted onto my VPS asap? Step by step instructions really needed. thank you.
Also, i have 2 free IPS.
View 7 Replies
View Related
Nov 18, 2008
I am wondering how to set up a nameserver on my new VPS with 1and1.
I have all my domains hosted on netfirms.
This is what I have done, but doesnt seem to be working:
i have a domain ex: mycompany.com on netfirms and i created an A Record that is ns1.mydomain.com that points to the ip of the VPS ex: 55.55.55.55
I have also created an ns2.mydomain.com. I did this through the netfirms control panel
Is there anything else i need to do?
View 4 Replies
View Related
Aug 20, 2014
I would like to setup a caching Bind nameserver for which I need to modify the file /etc/named.conf. The file is automatically created by Plesk however and I am unable to find information on how to modify the file in Plesk.
Code:
#ATTENTION!
#
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED.
// $Id: named.conf,v 1.1.1.1 2001/10/15 07:44:36 kap Exp $
Any way to modify named.conf?
View 1 Replies
View Related
Apr 4, 2008
1) I use DNSMadeEasy for a couple of my important domains so I can utilize their failover service.
2) I use my own nameservers for everyone else.
At my register (GoDaddy) I've added host entries to my domain (let's call it host.com) for ALL of my nameservers: DNSMadeEasy and mine. For example here are my host entries:
1) nsdme0.host.com = 55.55.55.55 (DNSMadeEasy)
2) nsdme1.host.com = 56.55.55.55 (DNSMadeEasy)
3) nsdme2.host.com = 57.55.55.55 (DNSMadeEasy)
4) nsdme3.host.com = 58.55.55.55 (DNSMadeEasy)
5) nsdme4.host.com = 59.55.55.55 (DNSMadeEasy)
6) ns1.host.com = 60.55.55.55 (mine)
7) ns2.host.com = 61.55.55.55 (mine)
At the register I've then configured host.com to use the first five nameservers for itself, the DNSMadeEasy nameservers.
For less critical sites that I host I simply point them to ns1.host.com and ns2.host.com, my nameservers.
Now, here's the twist. If I use dig to look up www.host.com I get:
[root@lax1 ~]# dig +trace www.host.com
; <<>> DiG 9.3.3rc2 <<>> +trace www.host.com
;; global options: printcmd
. 220048 IN NS D.ROOT-SERVERS.NET.
...........................................
. 220048 IN NS K.ROOT-SERVERS.NET.
;; Received 228 bytes from 66.63.160.2#53(66.63.160.2) in 1 ms
net. 172800 IN NS J.GTLD-SERVERS.net.
...........................................
net. 172800 IN NS G.GTLD-SERVERS.net.
;; Received 497 bytes from 128.8.10.90#53(D.ROOT-SERVERS.NET) in 74 ms
host.com. 172800 IN NS nsdme0.host.com.
host.com. 172800 IN NS nsdme1.host.com.
host.com. 172800 IN NS nsdme2.host.com.
host.com. 172800 IN NS nsdme3.host.com.
host.com. 172800 IN NS nsdme4.host.com.
;; Received 225 bytes from 192.48.79.30#53(J.GTLD-SERVERS.net) in 125 ms
www.host.com. 1800 IN CNAME host.com.
host.com. 75 IN A 60.55.55.55
host.com. 86400 IN NS nsdme2.host.com.
host.com. 86400 IN NS nsdme1.host.com.
host.com. 86400 IN NS nsdme5.host.com.
host.com. 86400 IN NS nsdme0.host.com.
host.com. 86400 IN NS nsdme4.host.com.
host.com. 86400 IN NS nsdme3.host.com.
;; Received 276 bytes from 123.123.123.123#53(nsdme0.host.com) in 68 ms
BUT, if I lookup the nameserver (ns1.host.com) I get:
Code:
[root@lax1 ~]# dig +trace ns1.host.com
; <<>> DiG 9.3.3rc2 <<>> +trace ns1.host.com
;; global options: printcmd
. 218964 IN NS M.ROOT-SERVERS.NET.
...........................................
. 218964 IN NS K.ROOT-SERVERS.NET.
;; Received 228 bytes from 66.63.160.2#53(66.63.160.2) in 1 ms
net. 172800 IN NS H.GTLD-SERVERS.net.
...........................................
net. 172800 IN NS G.GTLD-SERVERS.net.
;; Received 497 bytes from 202.12.27.33#53(M.ROOT-SERVERS.NET) in 115 ms
ns1.host.com. 172800 IN A 60.55.55.55
host.com. 172800 IN NS nsdme0.host.com.
host.com. 172800 IN NS nsdme1.host.com.
host.com. 172800 IN NS nsdme2.host.com.
host.com. 172800 IN NS nsdme3.host.com.
host.com. 172800 IN NS nsdme4.host.com.
;; Received 241 bytes from 192.54.112.30#53(H.GTLD-SERVERS.net) in 151 ms
What I've realized is that the actual IP addresses for nameserver host entries come from a higher level server than my own, in this case H.GTLD-SERVERS.net. I guess this makes sense but I just hadn't realized it before. It looks like I don't even need to have record entries in my DNS records for the host nameservers.
Now for the question. Can I:
1) Remove my custom host nameserver entries from my register.
2) Add entries in my DNSMadeEasy records to specify the location of ns1.host.com and ns2.host.com.
3) Use the failover provided by DNSMadeEasy to also fail-over my DNS entries for my nameservers?
I know this would require one more hop if it works but it would allow me to provide failover ability to fifty domains without having to purchase the extra domains at DNSMadeEasy.
View 2 Replies
View Related
Jul 31, 2008
As my clients' needs expand, they're asking for chroot ssh/sftp setup. I'm currently on a dedicated Linux setup but don't really have the time to set up a whole new box with full virtualization or investigate a full chroot solution (baby on the way), and to be honest it would be less hassle to move to a new provider than worry about down time with sites.
What I'm looking for:
- linux hosting
- hosting for 30+ accounts, some with several domains
- at least 6 IP addresses for SSL certs
- each account in a full chroot environment (ssh/sftp/ftp) so they can't poke around each others' files, or each account set up in a virtual machine setup (ie: openvz)
- maildir
- spamassassin
- php 5, mysql, perl 5.8.8
- suexec apache would be nice
View 3 Replies
View Related
Aug 1, 2008
I have learnt it is harder to setup than I initially expected (since I have just moved from a shared hosting service). I am in need of some help setting up my DNS servers, as I am very confused. Here is most of the info I know:
1) I am running HyperVM
2) I've installed LXAdmin
3) I own the domain (purchased from xeodomains.com) runemart.com
4) My VPS hostname is: vps.runemart.com
5) I know my IP
6) My host has said:
'For VPS customers that have a HyperVM login you can now host forward DNS on the DNS servers rdns1.vaserv.com (US)rdns2.vaserv.com (UK'
And I am unsure what this means/how to do it.
I am not sure if I need some more information to set up my DNS, however I am sure that I can get it if I do.
Now, my questions begin. Firstly, I need to point my domain - runemart.com - somewhere. I believe I need to set up my DNS via HyperVM or LXAdmin so that they are something like: ns1.runemart.com and ns2.runemart.com. Though, is this correct? Am I able to set up my own actual domain name servers, or will my domain have to point at something like rdns2.vaserv.com?
If anyone can assist me in this I would be very greatful, as I am waiting to get my website running. This is all I will ask for now, I will take it one step at a time =).
View 14 Replies
View Related
Jun 30, 2009
I have a domain hosted at godaddy.com and I decided to go with VPS hosting elsewhere. I have changed the nameservers to [url]and [url]at godaddy. I set up the reseller account in WHM but the nameservers point to something other than [url]I am trying to change them to the correct nameservers by using the "Nameserver IP Assigment" tool but it is taking literally forever. Is this normal?
Should I have to wait until it assigns an IP address to use the correct nameserver?
View 5 Replies
View Related
Aug 20, 2009
I just moved my site from a shared host to a VPS with PhotonVPS.
I forwarded the name servers at my registrar, GoDaddy.
However, when I look at my INTODNS report, I am getting all sorts of nameserver errors:
[url]
Is this normal while the changes propogate? Or did I mess something up, because I also cannot access my VPS cpanel now.
View 1 Replies
View Related
Jun 20, 2009
For some reason in WHM (root) (Fresh install) I'm trying to add a name server into ":2086/scripts2/listassignednsips" area and it just loads.... Never errors or anything just loads and loads for 30 minutes and never adds it. I have already add the IP's to the server. (6 IP's)
View 2 Replies
View Related
May 22, 2009
Have you come across this problem where you change the NameServer IP in '/etc/nameserverips' but the change does not reflect , instead it reverts to the old IP?
Doing the following fixed the issue for me.
Disable whois lookups for the nameserver ip manager via in WHM>Tweak Settings
View 3 Replies
View Related
Jul 21, 2008
when i set this namesever on other domain.
this message was show..
NameServer ns1.gempakbox.net is not a valid Nameserver
NameServer ns2.gempakbox.net is not a valid Nameserver
View 3 Replies
View Related
May 19, 2008
on setting up DNS server with my server. i dont know what to setup on dns zone files for my new server.
i have
registered xyz.com with godaddy.
i have 2 ip addresses (1.3.5.7 and 2.4.6.8)
my server hostname is server.xyz.com
and i am running bind.
i want to run my own name servers ns1.xyz.com and ns2.xyz.com
what to do next?
View 5 Replies
View Related
Jun 15, 2008
Say a person has a domain called mydomain.com
and this domain mydomain.com is hosted from a nameserver called ns1.mydomain.com and ns2.mydomain.com
will this mean that:
the person who own mydomain.com owned his/her own webhost server?
and is that what is being called dedicated server? where I already did some research that would mean the whole server is owned by the 1 person/domain only?
I have been asking question to myself quite sometime now.. and hoping that this forum could help me in understanding this matter.
View 10 Replies
View Related
Oct 6, 2007
I just took out a VPS hosting plan with Hostican, but I'm a bit confused about whether I followed their instructions properly... please be patient
Their instructions said this:
Quote:
Please note that on our network a VPS is like your own private space on the network to work from. This is why we provide your account with two dedicated IP addresses that you will need to use to register your name servers with. Please view the below name servers and IP addresses that you should use to register them.
ns1.mydomain.com <==> xx.xx.xx.xx
ns2.mydomain.com <==> xx.xx.xx.xx
Now all my domains are registered with 1&1, who don't provide an option for creating private nameservers in their control panel. So, I created two subdomains (ns1 and ns2.mydomain.com) and then created A records for ns1 and ns2, pointing to the IPs supplied by Hostican. Then I changed the nameserver for my domains to ns1 and ns2.mydomain.com
After a couple of days, this seems to have worked - domains point to new VPS webspace and emails working. I'm worried whether I did this properly though, or whether I'm going to get problems in future with reverse dns and stuff?
View 7 Replies
View Related
Mar 25, 2007
My dating site sends an email notification to the user when they receive a message on the site. Many of the notify emails arent going to their destination.
In exim, I keep seeing this message:
failed for
550-unrouteable
mail domain "ns1.mydomain.com"
550 Sender verify failed
View 3 Replies
View Related
Jan 3, 2007
I did ping the nameservers,
ns1.mydomain.com [130.74.135.102]
ns2.mydomain.com [66.21.114.11]
And this is when I added a new domain in Cpanel.
Using nameservers with the following IPs: 66.21.113.11,66.21.114.11 Bind reconfiguring on serverprovider using rndc
Created DNS entry for mydomain.com
Should it really be 2 different nameserver IPs?
View 4 Replies
View Related
Nov 4, 2007
I just got a VPS, (unmanaged...eh), and I seem to be having a problem with nameservers.
The current IP for the VPS is: [url]
Its set as the shared IP in WHM, so everything is pointing to that. I asked my host if the nameservers ns1.thehobbylounge.com and ns2.thehobbylounge.com should work (that is the domain for the account I am running under WHM/cPanel), and I was told that this was correct.
However my registrar gives me a validation error when I put in those nameservers for my domain.
I tried to follow these steps: [url]
But they seem to be already done...I think thats if your server isn't setup at all.
View 5 Replies
View Related
Aug 9, 2007
I'm setting up a dedicated server at a co-location and they keep asking me to provide 2 nameservers, such as:
ns1.yourdomain.com
ns2.yourdomain.com
But they won't explain any further than that. Do I make names up or are these the nameservers associated with my domain name at godaddy.com?
View 2 Replies
View Related
Jul 17, 2007
I installed DA, and setup my ip 11.22.33.44 = ns1.mydomain.com, 11.22.33.45 = ns2.mydomain.com and mydomain.com (host) = 11.22.33.46.
I went to registrar create NS : ns1.mydomain.com points to 11.22.33.44 and ns2.mydomain.com points to 11.22.33.45.
What else do i have to do here to get my NS working properly?
View 6 Replies
View Related
Apr 10, 2007
is it possible 2 name server on one ip
for example
ns1.xxx.com = 216.246.56.150
ns2.xxx.com = 216.246.56.150
is it possible
also i can not send to or recive from hotmail
but with yahoo and gmail it is fine i can send and recive
also how can i be sure the RDNS is setup
View 8 Replies
View Related
Oct 20, 2007
can't seem to figure out how the whole nameserver/DNS thing works.
My VPS is registered under a domain, say mydomain.com. So my nameservers on the VPS are registered under ns1.mydomain.com and ns2.mydomain.com, both assigned to the two IP addresses for my VPS.
The problem is, I'm trying to figure out how to get mydomain.com to actually point to my VPS from my registrar. If I type in ns1.mydomain.com and ns2.mydomain.com, it's just pointing to itself so it doesn't work.
View 1 Replies
View Related
Oct 30, 2007
I has a reseller plan and I was using one of my domains as nameserver. I mean ziafat.com was my nameserver and one of my sites.
Now I transfered to a VPS plan. I want to use my domain as nameserver and one of my sites. I changed domain manage page like this:
ns1.ziafat.com
ns2.ziafat.com
on the bottom of page I clicked this:
If you want to create or modify a nameserver which is based on ziafat.com click here.
and entered ns1.ziafat.com and ns2.ziafat.com and two IPs of my VPS plan.
Now all sites hosted on my new VPS opening currectly just ziafat.com (priemery and nameserver) domain opening as a blank site!
I saw server technical created a reseller account with ziafatco username and all of my accounts are under ownership of that.
View 2 Replies
View Related
Aug 11, 2007
I'm uploading my files to this new server and will switch over to it later.. I alredy know how to change the Nameserver at registrar...
My question is that how I should name the Nameserver on this new server?
Because my old server has the name of following Nameserver;
---------------------
NS1.MYSITE.COM
NS2.MYSITE.COM
---------------------
And my new server has exactly same name as this!!
I went throught WHM and I need to assign IP address to this Nameserver on the new server, and what will happen if I assign this IP address to the same Nameserver as in old server?
In this case,
1) Should I change the name of Nameserver to something else, such as following?
---------------------
NS3.MYSITE.COM
NS4.MYSITE.COM
---------------------
2) Or should I use IP address instead of using this English name?
3) Or should I wait until all the files are uploaded and assign this IP address to this Nameserver on the new box? I wonder what will happen if I do this, because there would be 2 different IP address to the same Nameserver in this earth!
View 11 Replies
View Related
Nov 8, 2007
I have just gotten a dedicated server this month.
CentOS with DirectAdmin (thanks to WHT for recommending this).
My problem is, I cant seem to "make" a nameserver and get it to work?
I have attached some .jpg. screenprints which I hope will help resolve my problem.
I hope you will look at the pictures and tell me what I am doing wrong.
I have followed the guide in DirectAdmin forum for creating a nameserver, but I still got problem. (I have not been able to post in there forum, cause I have not gotten a activate mail yet, so while I wait for that, I hope you will help me.)
I have waited a couple of days for the dns nameserver to update, but it is still not working.
View 5 Replies
View Related
Sep 23, 2007
I was with VPS Host A. When I wanted to have my domain name on the VPS from Host A, I simply entered the primary & secondary nameserver names at my registrars site and it was done.
Host A's service was poor, so I've started with VPS Host B. they created nameserver names for me at Host B's DNS for my VPS.
When I went to my Registrars site to entered these nameserver names, I was instructed to create an A record and a subdomain for each nameserver name.
I don't understand why it was simple with the first set of nameserver settings but not the 2nd ones.
The domain name for my first vps is different than my second vps.
The nameserver names from Host A didn't include the doamin name, for example Host A's were ns1.computer.com and ns2.computer.com and the nameserver names from Host B were ns1.mydomain.com and ns2.mydomain.com.
Could it be that it wasn't easy the second time because the nameserver names included my domain name?
View 1 Replies
View Related
