My PC Is Blocked. Cannot Access To My Server
Apr 12, 2008
Yes, cannot access my server with my PC. Tried everything but no avail. I confirmed that the server is up and running, everyone else can access it.
Here is what has been done so far:Cannot access to server after my FTP program automaticly tries to connect few times with wrong password. Fine, my IP will be flushed in 10~20 minutes tops. But no, after an hour still cannot access.
Submitted a ticket to the provider. They have flushed the Iptables, stopped the firewall, and added my IP address to allowed hosts file.
I have stopped the firewall in my PC. Flushed the DNS cache and restarted the windows.
Can use internet without a problem. Can access any website w/o problem except my own server.
Can anyone think of anything causing this?
View 1 Replies
ADVERTISEMENT
Sep 3, 2007
I got the server hosting at liquidweb.
I access my website and ssh normally until 2 days ago. I couldn't go to my website and ssh anymore. All my clients can go to the website, sftp, ssh normally. I did a VPN to my company office and I can access to my website and ssh from my office.
Obviously, my IP address at home was blocked.
Do you think that was from Liquidweb firewall or my server cpanel firewall or something like that?
View 7 Replies
View Related
Feb 25, 2009
It appears that I may have my access blocked from my home network to my web site. I was attempting to set up a POP email account the other night on the server. Since then, I have not been able to access my domain name through ANY of my browsers.
Also, I cannot log-in via FTP. I also tried from my iPod touch on my wireless network at home, no access.
I was able to access and FTP today at work. I also can access on my blackberry. How is this possible?
View 6 Replies
View Related
Nov 19, 2007
I have an issue with 4 servers, one at theplanet.com and 3 at ayksolutions.com
Traceroute from any ayk servers to the planet dies on the last router on the planet site,
traceroute from the planet to any ayk servers dies on the last router on the ayk site.
using a different IP for the planet server works.
Now, how can I figure out which router blocks this connection?
Everything was perfect till yesterday. I can ssh on all servers.
Technical staf from both ISPs has no idea and point to eachother. Is it other tool to see where I'm blocked.
View 5 Replies
View Related
Jun 5, 2007
I am often blocked by my own server.
So I can access my site through anonymouser.com but I cannot access my site directly. Changing my IP (using ASDL) will solve the problem.
A techie told me that it happened because of failed login attempt.
However, I had not made any failed login attempt?
Then it happened again today.
Why is this happening?
Though I didn't make eronous login attempt, I did try to check whether my sites are on or not a lot.
View 6 Replies
View Related
Nov 4, 2008
Unfortunately yahoo blocked our server ip, so our customer cant send any email to yahoo!
How can fix this issue? Do you have any email or ticket system in yahoo for contant about this issue?
View 4 Replies
View Related
Aug 25, 2007
When my forum sends out emails to Hotmail users, I always get this message back:
Quote:
SMTP error from remote server after MAIL command:
host mx3.hotmail.com:
550 Your e-mail was rejected for policy reasons on this gateway. Reasons for rejection may be related to content with spam-like characteristics or IP/domain reputation problems. If you are not an e-mail/network admin please contact your E-mail/Internet Service Provider for help. For e-mail delivery information, please go to [url]
How do I get off the blacklist? This is affecting all my forum users using Hotmail.
View 6 Replies
View Related
Mar 15, 2008
I cannot send emails to name@hotmail.com from any of sites hosted on my server. No mass emails. no unusual activities. Even though they blocked it. I filled out their forms but they didn't remove the block.
View 11 Replies
View Related
Nov 30, 2007
I just found out all my mails sent to Gmail are marked as spam. However, if I check my IP address in independant grass-root spam databases, my IP address isn't blacklisted. I checked 7 of them. Do you know how to solve this problem
View 6 Replies
View Related
Jul 27, 2008
We have a server with a fine company, BocaCom. They are who the IP addresses are we use ultimately registered to. It seems we are being blacklisted by secureserver (isn't that Godaddy?) because the IP does not register to us for our outgoing email. It registers to BocaCom.
Is anyone else having this problem, and how to we get around it? We've contacted BocaCom and are waiting for their reply. Is this an IP issue or am I reading the secureserver reply wrong?
----------------
Dear Sir/Madam,
While there is indeed an rDNS record created for 72.35.xx.xx, it does not point back to the original A record. This will need to be updated before we can look further into unblocking the IP.
----------------
View 3 Replies
View Related
Oct 16, 2013
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
View 1 Replies
View Related
Aug 28, 2012
How can I allow only one ip or a list of ip addresses to access port 8443.I need to limit access this port to few ip addresses and not everyone
View 6 Replies
View Related
Dec 6, 2008
I've changed the shh port on my server and now I can't log in.
I changed the port to 4247 in the /etc/ssh/sshd_conf file.
I've tried using port 22 incase I messed it up but that doesn't work either.
Obviously I can't get back in to check it or change it.
Using WHM/cPanel.
View 11 Replies
View Related
Dec 9, 2008
When IIS is on using Windows 2008 standard I could get access to my server IP remotely ; otherwise my server is invisible
Is this due to Win firewall config,? Active Domain Controller config? or any other setting?
View 1 Replies
View Related
Mar 1, 2007
I have a little problem with either my server or my connection. For some darn reason I will be doing FTP uploads on small PHP files or viewing the forums on the server and then everything will start timing out. Yesterday this happened I would be able to get on the server from time to time for short amounts of time. After about 3 hours is went back to normal. Tonight, however, it did the same thing but I have no access to the server and it's been like this for about 4 hours. What could be causing this?
View 9 Replies
View Related
Aug 22, 2007
I have requested SSH access and they said they have enabled SSH on my account. The problem is, when I try to connect to my domain, I keep receiving Network error:
Connection timed out. There is no login window asking me for username and password. I'm using PuTTy and WinSCP, both with no success.
View 7 Replies
View Related
Sep 18, 2009
I have a strange problem that I encounter sometimes. I have 3 websites on my hosting account. About once a week, I will try to access one of those sites and I will get a timeout or connection error in my browser. I will not have any problem viewing any other websites and as soon as I restart my computer, I can view my sites again.
It seems like either my computer, wifi router, isp or webhost decides to block me from accessing any of my 3 sites for no apparent reason. Restarting my computer fixs this. My ip does not change when I restart my computer so I do not know why it would suddenly allow me acces again but it does.
What is this problem likley to be? A bug on my computer, a bug on my server? My isp being retarded? No one else seems to have any problems accessing my site, I would guess it is a local issue. What I can not figure out though, is why it only happens to my own websites on my hosting account. This never happens when trying to view any other websites except my own(on my hosting account). This cannot be a coincidence. It is a big mystery to me.
View 3 Replies
View Related
Jul 5, 2008
Do most webhost that come with the SSH access allow the installation of an IRC server (unreal)?
can anyone link me to good cheap ones
dont want to go registering to one and find out later that i cant
View 14 Replies
View Related
Mar 1, 2008
I've got customers in the UK and Canada that are having problems accessing the server. It's defiantly a problem with the server, just got it, I've had them try to go to the site directly using a server address, 69.65.51.104/~populiw/index.php, with the FIREWALL disabled.
View 8 Replies
View Related
Apr 12, 2008
I have many accounts on my server, everyone can connect via FTP but when they try to upload something they get "access denied", i get it too, sometimes it works for a few minutes and goes back to giving me access denied. I have not changed any settings since it was working just fine before. I checked the folder permissions, user permissions, used chown command to make sure the folders belonged to the correct users/groups and I disabled the firewall same thing, any ideas what might be going on? do you this I have a virus on the server? it's a linux server
View 4 Replies
View Related
Aug 26, 2008
My question is regarding Microsoft Access Databases and ASP.NET. I know that you need SQL server installed so that your website can communicate with any sql databases in use. Do you need Microsoft Access installed on a server where you accessing a MS Access Database?
View 1 Replies
View Related
Jan 4, 2007
I am wondering how powerful of a computer/server I'm going to need for a project for work.
The server will only be accessible over the companies LAN, it will most probably need to be running Windows, because that's what the rest of the system runs. Even though I'd rather have it Linux. The server will be running Apache, PHP, and MySQL.
It will need be accessed by around 100-200 workstations (200 on the far out side max).
They don't need to write to the database. Just read. So possibly only 1 to 2 MySQL queries per page. PHP will be of course used to generate the pages.
So how powerful of a server that's just dedicated to this would be needed?
I realize this might not be the right forum for this, but the people here are so helpful
View 6 Replies
View Related
Mar 21, 2007
I am in the process of moving my dedicated server from one location to another. I have requested second drive to be installed on server. How do I access in through SSH? I am using Linux, FC4.
Also, what is the command to compress all data in certain directory, so that I can simply wget the large compressed file from the new server?
View 6 Replies
View Related
Aug 10, 2007
I would like to setup my server to allow remote access from home. It's on an office network which is separated from the WAN by a router. So long as I'm on this network, I can access the server from any computer connected to it. I enter the https URL of my server through IE and it brings me to the helm interface (the one that comes with Windows Server 2003). I can click on Maintenance and then on Remote Desktop, and it opens a new window with the server's desktop displayed.
If I'm somewhere other than the office network, I can't access it. IE gives me a "can't find webpage" message (or something along those lines). How do I setup my server to access it from outside the office network. I'd prefer to have a similar graphical interface as Remote Desktop.
View 3 Replies
View Related
