When IIS is on using Windows 2008 standard I could get access to my server IP remotely ; otherwise my server is invisible
Is this due to Win firewall config,? Active Domain Controller config? or any other setting?
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
How can I allow only one ip or a list of ip addresses to access port 8443.I need to limit access this port to few ip addresses and not everyone
View 6 Replies View RelatedI've changed the shh port on my server and now I can't log in.
I changed the port to 4247 in the /etc/ssh/sshd_conf file.
I've tried using port 22 incase I messed it up but that doesn't work either.
Obviously I can't get back in to check it or change it.
Using WHM/cPanel.
I have a little problem with either my server or my connection. For some darn reason I will be doing FTP uploads on small PHP files or viewing the forums on the server and then everything will start timing out. Yesterday this happened I would be able to get on the server from time to time for short amounts of time. After about 3 hours is went back to normal. Tonight, however, it did the same thing but I have no access to the server and it's been like this for about 4 hours. What could be causing this?
View 9 Replies View RelatedI have requested SSH access and they said they have enabled SSH on my account. The problem is, when I try to connect to my domain, I keep receiving Network error:
Connection timed out. There is no login window asking me for username and password. I'm using PuTTy and WinSCP, both with no success.
I have a strange problem that I encounter sometimes. I have 3 websites on my hosting account. About once a week, I will try to access one of those sites and I will get a timeout or connection error in my browser. I will not have any problem viewing any other websites and as soon as I restart my computer, I can view my sites again.
It seems like either my computer, wifi router, isp or webhost decides to block me from accessing any of my 3 sites for no apparent reason. Restarting my computer fixs this. My ip does not change when I restart my computer so I do not know why it would suddenly allow me acces again but it does.
What is this problem likley to be? A bug on my computer, a bug on my server? My isp being retarded? No one else seems to have any problems accessing my site, I would guess it is a local issue. What I can not figure out though, is why it only happens to my own websites on my hosting account. This never happens when trying to view any other websites except my own(on my hosting account). This cannot be a coincidence. It is a big mystery to me.
Do most webhost that come with the SSH access allow the installation of an IRC server (unreal)?
can anyone link me to good cheap ones
dont want to go registering to one and find out later that i cant
I've got customers in the UK and Canada that are having problems accessing the server. It's defiantly a problem with the server, just got it, I've had them try to go to the site directly using a server address, 69.65.51.104/~populiw/index.php, with the FIREWALL disabled.
View 8 Replies View RelatedI have many accounts on my server, everyone can connect via FTP but when they try to upload something they get "access denied", i get it too, sometimes it works for a few minutes and goes back to giving me access denied. I have not changed any settings since it was working just fine before. I checked the folder permissions, user permissions, used chown command to make sure the folders belonged to the correct users/groups and I disabled the firewall same thing, any ideas what might be going on? do you this I have a virus on the server? it's a linux server
View 4 Replies View RelatedMy question is regarding Microsoft Access Databases and ASP.NET. I know that you need SQL server installed so that your website can communicate with any sql databases in use. Do you need Microsoft Access installed on a server where you accessing a MS Access Database?
View 1 Replies View RelatedYes, cannot access my server with my PC. Tried everything but no avail. I confirmed that the server is up and running, everyone else can access it.
Here is what has been done so far:Cannot access to server after my FTP program automaticly tries to connect few times with wrong password. Fine, my IP will be flushed in 10~20 minutes tops. But no, after an hour still cannot access.
Submitted a ticket to the provider. They have flushed the Iptables, stopped the firewall, and added my IP address to allowed hosts file.
I have stopped the firewall in my PC. Flushed the DNS cache and restarted the windows.
Can use internet without a problem. Can access any website w/o problem except my own server.
Can anyone think of anything causing this?
I am wondering how powerful of a computer/server I'm going to need for a project for work.
The server will only be accessible over the companies LAN, it will most probably need to be running Windows, because that's what the rest of the system runs. Even though I'd rather have it Linux. The server will be running Apache, PHP, and MySQL.
It will need be accessed by around 100-200 workstations (200 on the far out side max).
They don't need to write to the database. Just read. So possibly only 1 to 2 MySQL queries per page. PHP will be of course used to generate the pages.
So how powerful of a server that's just dedicated to this would be needed?
I realize this might not be the right forum for this, but the people here are so helpful
I am in the process of moving my dedicated server from one location to another. I have requested second drive to be installed on server. How do I access in through SSH? I am using Linux, FC4.
Also, what is the command to compress all data in certain directory, so that I can simply wget the large compressed file from the new server?
I got the server hosting at liquidweb.
I access my website and ssh normally until 2 days ago. I couldn't go to my website and ssh anymore. All my clients can go to the website, sftp, ssh normally. I did a VPN to my company office and I can access to my website and ssh from my office.
Obviously, my IP address at home was blocked.
Do you think that was from Liquidweb firewall or my server cpanel firewall or something like that?
I would like to setup my server to allow remote access from home. It's on an office network which is separated from the WAN by a router. So long as I'm on this network, I can access the server from any computer connected to it. I enter the https URL of my server through IE and it brings me to the helm interface (the one that comes with Windows Server 2003). I can click on Maintenance and then on Remote Desktop, and it opens a new window with the server's desktop displayed.
If I'm somewhere other than the office network, I can't access it. IE gives me a "can't find webpage" message (or something along those lines). How do I setup my server to access it from outside the office network. I'd prefer to have a similar graphical interface as Remote Desktop.
I wanted to know about 403 error. I want to access a site, as I am browsing - its giving the error as below:
-----------------------
Forbidden
You don't have permission to access / on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
-------------------------
Does anybody will help me regarding my issue. Can somebody tell me why I am unable to see the site.
Recently, i upgraded my WAMP from WampServer2.0f to WampServer2.0g.
I uninstalled WampServer2.0f and then only installed WampServer2.0g.
I can access [url] and i can see under my tools section that there is a link to phpMyadmin which points to [url]
I get the error: Forbidden - You don't have permission to access /phpmyadmin/ on this server whenever i try to access phpMyadmin.
Additional Info:
My WAMP icon is white.
I tried Restarting all services but nothing helped.
I have a folder called phpmyadmin3.1.3 which is located inside C:wampapps.
The version of MySQL on my localhost is 5.1.32 (How do i know this? I clicked on my WAMP icon, pointed to MySQL --> Version and it displayed a checked mark on 5.1.32).
Did some homework, and people say that there may be a problem with the phpmyadmin.conf file. It's located in my C:wampalias
Can that file be edited phpmyadmin.conf?
I havent tried uninstalling and reinstalling WAMP. I'll do that as a last resort (and i don't know if that will fix things).
I'm thinking about creating a limited platform for my employees to access my hosting servers
I wish they can create certain types of directories for users, set permissions on some directories, list users accounts, etc.
but although I don't think they would want to abuse this kind of access, I not only like the Trust-No-One premisse, but I also find it not very unlikely that the computer they're using get compromised or something like that
so I'd like to get technical ideas on how to develop this system and to know if anyone is interested and would like to contribute to the code
what I've considered so far is that I should either create a special user for that which would be on all users group, or should give it "root" access... the latter seems more reasonable for me considering the implementation and compatibility between systems and control panels
but with "root" access I mean "running MY INTERFACE to the employee as root"... this interface would have limited options like "create directory for user X", "list content of user X", etc. (taking a lot of care on input validation)... and would enforce some limits to prevent abuse (for example, can't list the content of more than 10 users per hour, or something like that... and alert me)
my main doubt is how you think that should be implemented? as a special server or as a webservice? with webservice I have the advantage of being capable of using SSL in a simple way and I don't need a special client (since any browser is a client)
then that could be PHP or Perl... but running as UID 0 (I don't even know if apache allows that, or if there's a workaround like SUID)
my question
i Have a server with centos and WHM cpanel , the last days i have read in the ssh log files (security) many failure logins from many IP adress
i read some about IPtables and everytime when i read in the log for an ip i block this Ip from IPtables , but this seems bad and boring exepiriance everyday.
so does anyone know the exact command for the IPtables , how to have access to my ssh ONLY from my ip address ?
my IP adress it is static and i want only from that ip to have access to the server and noone else from diferent ip
I've setup a dedicated server that is currently running with a domain bound to it. However this time I want to setup a centos 5.1 + latest apache 2 + bind 9 server that can only be connected to by IP address and doesn't have a domain name. So what do I need to modify in the below files to do so:
First of all will I even need bind at all? I already have it setup and (mis-)configured but I guess if I don't need it I can just take if off of autostart and stop the process "named".
Named.conf
options {
pid-file "/var/named/chroot/var/run/named/named.pid";
directory "/var/named/chroot/var/named";
query-source address * port 53;
allow-query { any; };
allow-transfer { };
recursion no;
notify no;
version "unknown";
};
logging {
category default { null; };
};
zone "server.domain.com" { type master; file "server.domain.com.db"; };
I don't even want the zone have domain.com in its name but that's just there so I could show you how I'd include server.domain.com.db.
server.domain.com.db
$TTL 14400
@ IN SOA ns1.domain.com. root.server.domain.com. (
2007052503
14400
3600
1209600
86400 )
server.domain.com. 14400 IN NS ns1.domain.com.
server.domain.com. 14400 IN NS ns2.domain.com.
localhost 14400 IN A 127.0.0.1
www 14400 IN A 78.129.174.164
I'm not sure what to do about those references to domain.com here, they shouldn't be needed but without them I don't know what to put here. ^^
Obviously I can't use those nameservers...
resolv.conf
nameserver 127.0.0.1
nameserver 78.129.143.155
nameserver 87.117.198.200
nameserver 87.117.196.200
The only thing missing from this file is "search domain.com" at the top, is that needed even though I won't really have any domains used by this server?
/etc/hosts:
# Do not remove the following line, or various programs
# that require network functionality will fail ....
how I can do to allow External Access Mysql Database on my server ? What's the procedure ?
View 1 Replies View RelatedI got this domain hosted on my server where i can't ping or trace it. Every setting seem to be correct, the ip address, name server...etc. and other websites hosted on the server is working fine. i can reach other websites with no problem but not this domain.
how do i trouble shoot such problem? would deleted the website and recreate solve it?
has anyone ever come across such strange problem?
I have a local web server that I want to make available outside of my local network of two computers. I configured NAT at my router, configured the firewall. I Typed the external IP and got nothing, while I still was able to access my web server by typing "localhost", I tried both IIS and Apache, but what is interesting is that fact that the other people can access my web server via that external IP, I just cannot access it from my local network.
View 4 Replies View RelatedI have an outsourced project where someone from India is developing a program for me but we keep running into a problem that I can't find the solution too.
Every time we try to use our program to access one of our private squid/proxy server we receive an error back.
Type: System.Net.WebException
Message: Unable to connect to the remote server
Our VPS is a windows 2003 server and I'm pretty sure that one of the services is blocking the program or anything from accessing a remote server. By the way I disabled the firewall and I'm still having problems .
my clients are asking for ssh access, if I gave them ssh access, can they hurt server / other clients in any possible way?
View 14 Replies View RelatedI am actually very inexpirience in server management. I have a small - I believe - problem. I need to get config file onto my computer from my root server. I can access it through terminal, but it is not very confortable. The config file is on root server.
the file is located at //etc/xxx.conf
Do I need to use web browser to do it? If so how?
Or is there a way that I log to my root server through ssh and transfer onto my computer?
1. If I recompile my mysql, can that potentially harm any of my database / table / data?
2. Here is a list of files. [url]. I guess, I have the same in my server. Any idea how can I access to these files?
Here is what I got -
root@usr [/]# find myisam
find: myisam: No such file or directory
I recently installed Apache/2.0.64(win32)on my Windows 7 machine and am having a problem with external access. The installation appears to be good as it shows all services running and I can access a basic index.html file through 127.0.0.1
I have ruled out any router or firewall issues and am fairly sure the problem is with the httpd config. But the only changes I've made are to the NameServer and Listen directives, so I'm lost for an answer to the problem.
The NameServer is set to my actual IP address while the Listen one is set to my servers internal IP address, but I have tried switching them around with no success.
The other thing I don't know is if I need to have SQL and myPHP installed just to check basic functionality.