Is There Any Website Redundancy Service (dns Based)

Oct 5, 2009

Let’s say I have the website myname.com

Myname.com is a very popular website and his content mirrors in 2servers (Server A and Server B) in 2 different datacenters (exactly same content).

When Server A fails due to datacenter or rack problem and no site is responding, then I need some service to transfer ALL traffic to server B. Is there any (paid or free) service doing such a thing? If yes, what about dns propagation? As far as I am concerned, dns propagation is a very slow procedure depending on each internet provider.

So how could we instantly make Server B to come live to ALL visitors? Is there any quick and reliable dns redundancy system without having to wait for dns propagation?

View 6 Replies


ADVERTISEMENT

Website Redundancy...

Sep 19, 2008

I have multiple hosting plans with different hosts and in different areas. I also have some STATIC websites.

I would like to know if there is a way for me to make my website available on multiple servers in case one of them is down.

I thought of changing the nameservers of my domain to

IP1 Hosted on host 1
IP2 Hosted on host 2
IP3 Hosted on host 3

of course the files will be uploaded to all three servers.

Is it possible and how should it be done?

View 11 Replies View Related

Website Redundancy (Hosted In Multiple Datacentres?)

Aug 24, 2008

Not sure where this belonged so put it in web hosting as it could cover dedicated, colo or shared.

In a couple of months I am going to be launching a new e-commerce website for the company I work for, so it is absolutely vital that the website never goes offline, otherwise I will be in deep ****.

It will be hosted on a server that has been built to be very redundant; 2x Hotswappable Redundant PSU, 4x Hotswappable HDDs (RAID 6), Redundant NIC.

Sods law though to achieve this redundancy it will need to be on a colocated server, so if there is a major problem like the motherboard dying, then I will have to get down to the DC (3 hours away) and replace the entire server. Which wouldn't be practical as we would need a replacement server, all setup and ready to go, to do that.

Also, if there is a problem with the data centre itself, then we would be stuck until it is resolved. I have hosted sites with data centres in the past that experienced power or network problems which sent the sites down and it was totally out of our control to either prevent the downtime or restore the sites.

So to increase redundancy, and minimise downtime, I was thinking of load balancing between two servers. But then I assume they would both have to be hosted in the same data centre.

I was also thinking of having the site hosted on the server, but having some shared hosting (or a cheap dedi) ready to go just to fall back on if the server goes down. That way I can forward requests to the shared hosting as a temporary measure whilst the main server is restored. But the problem with that is I would probably need to get another SSL certificate. I would need to get the payment gateway provider (protx) to change the settings for the IP of the shared hosting, which knowing them will take 72 hours to process.

Budget really isn't an issue here if it can be justified, just looking for some ideas at this stage. There is no way this site can be down for a second longer than it needs to be.

View 4 Replies View Related

How Do I Set Up Web Based Emails For A New Website

Sep 24, 2009

I have set up a new Web site on one of our servers which has Qmail on it.

This web site is SmartsWin.com

What are the Steps necessary to take so that I can set up the email addresses of the various people affiliated with this Web site? That is like john@SmartsWin.com, jane@SmartsWin.com, etc.?

Also I want the emails to be Web accessible via a Web based interface such as
Hoard or Squirellmail, or another Web based interface if you think it is better or easier to set up.

What are the easiest way (Steps) to get the above task done?

View 12 Replies View Related

Solar VPS Refuses Service Based On A Year Ago

Jul 11, 2008

The Solar VPS CEO has a guilty conscience or something that I will screw him up...he knows that I won't do a thing to his company....anyways...cause I want to apologize to him...in public....and I want him to read this...I called him a fool...on live chat...for not agreeing to a idiotic final decision...decisions are based on a company...and should be changed....I just want a VPS for my portal...thats it....

View 14 Replies View Related

Windows Based Hosting For A Big Website

Jun 18, 2008

I was going to use reliablesite.net to host my website, but I guess I'll wait and try to find something better.

What I need is a hosting provider that is relatively cheap, windows based (I use .net) and that can handle big amounts of visitors.

View 12 Replies View Related

Plesk Automation :: Node Selection Based On Service Template

Aug 11, 2014

We have a PPA environment with 7 service nodes (one management node, two web-, two database- and two e-mail servers). We also have 2 variants of hosting, a consumer and business variant.

We want separate the consumers from the business variants on the service nodes.

I want to use webserver1, databaseserver1 and emailserver1 for consumer hosting and webserver2, databaseserver2 and emailserver2 for business hosting

I want to make two service templates, one consumer and one business template.

Is it possible to configure ppa : When we subscript a consumer template, everything must provision only on the consumer service nodes automatically (web01, db01 and email01) and not on the business services nodes.

View 4 Replies View Related

Website Availability Monitoring Service

Jan 6, 2009

any recommendations for a website availability monitoring service? That is, I'd like a service that checks my site regularly, say every 5 minutes, and then calls my cellphone /txts-me if it ever goes down.

Googling around turns up a sizable number of places that do this. But, I'd like to make I'm going with somebody who's reasonably good.

View 14 Replies View Related

How To Host Email Service Website

May 10, 2008

Lets say I own domain sexy.com

I want to offer email to users me@sexy.com, you@sexy.com etc etc.

What do I need? Is a webhost sufficient for hosting email service?

any system/script to take care of the user management side?

View 14 Replies View Related

Website Uptime Monitor Service

Jun 11, 2008

I saw a few website monitor service but I can't find it anymore.

(i only have 1 website to monitor) and allow email notification.

View 14 Replies View Related

Pingdom Offering A Free Website Monitoring Service

Jul 1, 2009

"No strings attached" - [url]

I use Pingdom "Pro" (or whatever the paid version is to be branded as), and I think it is fantastic. It is yet to let us down or misinform us. It'll be interesting to see whether we see quality dilution from the inevitable rush of freebie accounts.

View 13 Replies View Related

Plesk 12.x / Linux :: Service Is Not Working From Website Nor Through Ssh Commands

Jul 26, 2014

I have a problem with my linux server using plesk 12x, I am using postfix as the email service, all emails are working from the webmail (horde) and from any email client using smtp.However the service is not working from the website (contact form on Wordpress) nor through the ssh commands. I have searched for few days but I still seem to have an issue.

Code:
ls -la /etc/alternatives/mta
the output is "nothing found".

and

Code:
ls -la /usr/sbin/sendmail
output: lrwxrwxrwx 1 root root 21 nov 4 2011 /usr/sbin/sendmail -> /etc/alternatives/mta

View 3 Replies View Related

Apache :: Converting Config From IP Based To Name Based Virtual Hosts

Feb 26, 2015

I have a task of converting a current Win Server based apache server from multiple IP based virtual hosts to a full name based virtual hosting.I'm famiilar with the steps but I was wondering if there are any gotchas in Windows that I should be aware of. It seems that now matter what I change in the new config it doesn't work or work as expected.

View 1 Replies View Related

Redundancy DNS Fail

Oct 7, 2006

what happens when I have 2 DNS servers on my domain and 1 fails?
around 50% of the access fails... or they detect DNS timeout and try the other one, so 50% of the access would just take more time?

View 2 Replies View Related

Cisco Redundancy

Sep 25, 2009

after months of disruption moving servers into a new data centre, our once reliable colocation company has now had nearly 6 hours downtime in the last 16 hours. So much for network redundancy.

View 5 Replies View Related

2 Servers For Redundancy

Aug 19, 2008

im now having a second server located somewhere else then my first one.

I'd like to setup something to have redundance. if server1 goes down or even if it's too much loaded server2 take the charge.

How can i do this?

let say im having a domain "mydomain.com"

Server1 ip: 10.0.0.1 (Services; Apache, DNS)
server2 ip: 192.168.0.1 (Services; Apache, DNS)

mydomain.com nameserver would be.
ns1.mydomain.com -> 10.0.0.1
ns2.mydomain.com -> 192.168.0.1

Now will i have to create 2 NS record on both server plus A record.
I cant understand this part ?

Now how would i setup bind so they replicate zone btw each other?

View 1 Replies View Related

DNS Failover/Redundancy

May 1, 2008

Basically have 2 hosting accounts at different providers...each set-up for the same domain name...and then somehow wtih DNS make it so if host #1 goes down traffic goes to host #2 (which would basically be a splash screen explaining that host #1 is down and will be back soon).

DNS isn't my strong point, but I do know you can do this with MX records...so if the first server fails it tries the next until it gets a working one or reaches the end of the list. I'd just like to do it is A records.

It wouldn't be as simple as setting the nameservers like this would it?

ns1.host1.com
ns2.host1.com
ns1.host2.com
ns2.host2.com

Would it use the host1 nameservers as long as they're online, and if not failover to the host2 nameservers? If so, great, but what if the host1 nameservers are online but the server itself is not.

View 4 Replies View Related

Switch Redundancy

Apr 11, 2008

What are the smaller shops doing for switch redundancy? We have all our machines on dual Com Ed feeds but most switches in the $1k-$3k range only have one power supply. We recently had a power strip go flakey and of course the switch was plugged into it.

Is the best solution getting two switches and hooking each machine up to both? How hard is that to setup in Linux? I've used keepalived for whole machine failover but not for network failover.

View 14 Replies View Related

Redundancy Options

Jun 2, 2008

I host several web clients that were recently impacted by the crap at ThePlanet. As I think about how to be more redundant (and repetitive) I'm not sure of my options.

What's the best practice to ensure that if you have a server at a data center that goes out, that you can (somewhat) easily switch over to a different server? I suppose one solution is to have 2 servers at 2 physical locations, and then you could just change the DNS record in the event of failure, but is there another solution I'm not aware of? Is there a good resource I can goto to read up on this info?

View 5 Replies View Related

File Server Redundancy

Sep 29, 2009

I am planning to buy a dedicated server and a shared server from a hosting company.
Basically I want to have a redundant server so that if one file server goes down, there is no downtime.

Somehow the servers would need to be constantly synchronized so that the files saved to one are immediately saved to the other server as well.

Can somebody told me how to setup the 2 server so that my dedicated server can serve as the main server and if the dedicated server is down, the shared server can automatically be activated and visitors of my website will auto be redirect to the shared server.

Do i need to setup any backup DNS too so that when the dedicated server is down, it will auto redirect the user to the shared server.

View 2 Replies View Related

CPanel DNS Clustering And Redundancy

May 5, 2008

I am working on setting up a few servers that run cPanel and the usual software, minus any sort of DNS server. These servers are setup to sync all DNS records over to a cPanel "Dns Only" (ns1.domain.com), which in turn syncs all its records to a backup DNS server (ns2.domain.com).

In other words:
[Domain registrar]
| |
[NS1]--Sync-->[NS2]
|
(Sync to NS1)
|
Cpanel Web Server

Now, say something happens to NS1 and the sever goes completely offline (i.e. power supply dies, CPU goes bad, etc.), which of the following scenarios would actually happen:

1) Because the registrar lists both NS1 and NS2 as NS records, NS1 would time out and the DNS lookup would look to the secondary DNS (NS2) for the record.

2) The registrar would randomly give out NS1 OR NS2 because of round robin, and if NS1 is given to a client as the result of a DNS lookup, the site will appear down, however if the client happens to be referred to NS2, the site would appear online.

3) The site would be down no matter what.

So, if someone with knowledge on the subject wouldn't mind enlightening me as to which of those would actually take place in the event of a failure on NS1, and maybe some suggestions as to keeping the DNS truely "redundant", then I would greatly appreciate it.

And Im aware that there are many 3rd party services that will take care of the DNS records and make them redundant (DYNDNS, DNSMadeEasy, etc) But I would prefer to keep the DNS in our full control.

View 6 Replies View Related

Redundancy Or More Hard Drive Space?

Aug 14, 2008

Redundancy or more hard drive space, what is your vote?

View 10 Replies View Related

Server Redundancy And Hosting Exchange..

Nov 11, 2008

I have two questions that hopefully someone will be able to help me out with. The first, is my partner and I want to provide server redundancy for our clients. Our set-up is as follows: two identical servers with multiple virtual machines (about 4) on each. One for SQL, one for IIS, etc. We also have a ServerIron XL to connect the two together and provide replication and load balancing. So the question is, has anyone here used a ServerIron XL and how easy is it to use/how effective is it? The second question is, we would like to provide our clients with hosted Exchange. I have set up and maintained a few Exchange 2007 servers, but only for a single company with a single domain. What would be the best way to go about providing a hosted Exchange solution?

View 0 Replies View Related

VPS Recommendation With Fast Mysql And Redundancy

Nov 20, 2008

I have a mysql based e-comm site that works only with older version of php and mysql. My shared host does not meet this requirements, so I have to go with a dedicated or vps.

I am looking for a server to have a fast mysql query.

Is there any vps providers that offer redundancy of the server, meaning if the server crash there should be a standby sever to take over?

View 11 Replies View Related

Load Balancing, Redundancy. How To Be Ready? For Cheap?

Feb 8, 2006

You always hear of stories of a company that had such overnight success that they servers couldn't cope at first. Of course, this is rare, although we'd all wish for it. But how can you stand ready for these situations without investing in big equipment that might not even be needed at the end.

Knowing that as a start up, you're low on cash. But if you hit the tree line upon takeoff, there might not be second chance.

View 3 Replies View Related

What Is Exactly Load Balancing And Server Redundancy And How To Apply It

Nov 4, 2006

what is exactly load balancing and server redundancy and how to apply it.

View 4 Replies View Related

Professional, High Redundancy Host Wanted

Mar 18, 2008

I've got a decent server, quad processor, 12GB ram, terabyte of hot swappable RAID 10 disk. Its at an Equinix site. They provide UPS, backup generators, etc and fiber to the usual major backbone folks.

But its a lights out facility. I want someone else to handle backups, rebooting when needed, etc.

I'd like to let someone else provide the service. Use my 2U server or I can rent yours.

Need MySql, Apache, Tomcat, SSL, Java, ssh access. I've got wildcard certs for SSL, domain registered, etc.

I'm guessing that I can get this for about $500 per month with low bandwidth (this is an IT application, not peer-to-peer or torrents.). Let me know if my budget is off base. I think one megabyte/second sustained over the month, 95% averaged is suffiicent. At least until the business grows, we can then talk about getting racks of blades at higher cost.

View 5 Replies View Related

Bluehost :: Is Five Minutes Of Power Poor Redundancy?

Jul 15, 2006

I don't have a problem with Bluehost, but after getting this email tonight I would have thought that it's not that hard to have enough fuel and a big enough generator to last more than five minutes after a power outage. It seems like pretty poor redundancy planning if a major host can't last more then five minutes with no power. Hospitals and other places don't have any problem doing it with similar or bigger power demands.

Dear Bluehost Customer,

This evening (July 14th) from about 5:25pm-6:55pm many of our servers
were offline causing significant downtime for many of our users. The
outage was due to a severe power outage in the north end of Orem, Utah
where our servers are located. We do have UPS backup as well as diesel
generators, but at about 5:30 they finally gave out. The power outage
was for much longer than that period of time, but the reserve power
was eventually consumed in its entirety. When it rains it pours.

For users on box65-box145 there have been periodic problems with the
Redhat linux kernel that we were using that was causing problems with
the filesystem that your data is stored on. This issue has been causing
periodic problems for users on those boxes. In the last few days we have
resolved that issue which also caused those boxes to require a reboot.

The downtime is extremely regretable. We apologize profusely for the
inconvenience to our customers and in turn to those who were trying to visit
your sites during the outage. With the fixes we have put in place in the
last few days coupled with other upgrades you should experience MUCH
better uptime in the future.

Thanks for you patience,

Matt Heaton / President Bluehost.com

View 5 Replies View Related

New To Colo, Would Like Comments About Hot Swap, Redundancy, And Bandwidth

Feb 4, 2008

Considering skipping VPS and going to a colo setup for a handful of sites. Nothing major, so the server will be very entry level, but with redundancy in mind (software RAID1 and 2 nics). But I have a few basic questions:

How good is hot swapping in Linux? This was very hard to me to find out online. I am getting a 1U rack with a hot swap backplane and 2 SATA drives. I won't be using any commercial software with my setup.

How does redundant NIC work? This is new to me and am wondering how this is setup.

I think I can shop around NYC for a 1U slot for around $40 a month. I don't need a lot of transfer, but would like a decent pipe. The thought of 1Mbit sounds unattractive (transfer is around 100KBytes/s, right?). How much would 10Mbit cost? I found some quotes but they seem way too much (I could be wrong).

View 11 Replies View Related

How Can I Setup Dual NIC Cards For Extra Redundancy

Jan 10, 2007

I have linux dedicated server and like to setup dual NIC cards for extra redundancy.. in case one NIC card fails.

I have no idea how I can set this up..how can I do this? I understand at least I need swtich.. and?

View 13 Replies View Related

Prefered Method Of Network Redundancy (Server Connectivity)

May 16, 2007

There are several methods of offering network path redundancy. The basic decision for me has come down to:

Do it at Layer 2
Do it at Layer 3

At the moment we have layer 2 redundancy to each server. 2NICs on the server up with one having the IPs for apache/mysql/etc. each nic going into a seperate switch and the switches connected together, with 2 routers running VRRP to handle the gateway.
Everything is Vlaned.

So basicaly the switch redundancy is done by spanning tree and the IP redundancy is done with a process on the router/server to move the IP to the other router/server NIC if there is an issue.

I am thinking about going with 2 fully seperate networks. in differant subnets. where each router would have a gateway. the routers would talk to each other and they would speak OSPF or ISIS with the servers. This way I would move hosting onto loopback IPs on the servers and those loopback IPs would be advertised to the both routers through seperate networks.
Again everything would be Vlanned.

This has the advantage of getting rid of spanning tree which has caused issues from time to time. It would keep redundancy up and we could standardize on the routing daemon ran on the servers allowing all of the various OSs we run to have the same basic config for network redundancy. Where now each OS tends to have its own solution. This would make life easier from a config and troubleshooting point of view.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved