Installed TightVNC. Fails. Can't Find Fonts When Ran. Running CentOS.
Aug 13, 2007
I'm trying to run freenx and tightvnc. I can't get freenx working, so I moved on to try to install tightvnc. I installed the Fedora rpm on my CentOs box. Everything installed.
When I tried to run it, it failed and exited. It says I'm missing fonts. I had the technicians install GNOME when it was being installed, but I don't think its configured.
Quote:
[root@10 share]# vncserver
Couldn't start Xvnc; trying default font path.
Please set correct fontPath in the vncserver script.
Couldn't start Xvnc process.
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
13/08/07 16:14:39 Xvnc version TightVNC-1.3.9
13/08/07 16:14:39 Copyright (C) 2000-2007 TightVNC Group
13/08/07 16:14:39 Copyright (C) 1999 AT&T Laboratories Cambridge
13/08/07 16:14:39 All Rights Reserved.
13/08/07 16:14:39 See http://www.tightvnc.com/ for information on TightVNC
13/08/07 16:14:39 Desktop name 'X' (10.40.223.72.static.reverse.ltdomains.com:1)
13/08/07 16:14:39 Protocol versions supported: 3.3, 3.7, 3.8, 3.7t, 3.8t
13/08/07 16:14:39 Listening for VNC connections on TCP port 5901
13/08/07 16:14:39 Listening for HTTP connections on TCP port 5801
13/08/07 16:14:39 URL http://10.40.223.72.static.reverse.ltdomains.com:5801
_FontTransSocketUNIXConnect: Can't connect: errno = 2
failed to set default font path 'unix/:7100'
Fatal server error:
could not open default font 'fixed'
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb'
13/08/07 16:14:40 Xvnc version TightVNC-1.3.9
13/08/07 16:14:40 Copyright (C) 2000-2007 TightVNC Group
13/08/07 16:14:40 Copyright (C) 1999 AT&T Laboratories Cambridge
13/08/07 16:14:40 All Rights Reserved.
13/08/07 16:14:40 See http://www.tightvnc.com/ for information on TightVNC
13/08/07 16:14:40 Desktop name 'X' (10.40.233.72.static.reverse.ltdomains.com:1)
13/08/07 16:14:40 Protocol versions supported: 3.3, 3.7, 3.8, 3.7t, 3.8t
13/08/07 16:14:40 Listening for VNC connections on TCP port 5901
13/08/07 16:14:40 Listening for HTTP connections on TCP port 5801
13/08/07 16:14:40 URL http://10.40.223.72.static.reverse.ltdomains.com:5801
Font directory '/usr/X11R6/lib/X11/fonts/misc/' not found - ignoring
Font directory '/usr/X11R6/lib/X11/fonts/Speedo/' not found - ignoring
Font directory '/usr/X11R6/lib/X11/fonts/Type1/' not found - ignoring
Font directory '/usr/X11R6/lib/X11/fonts/75dpi/' not found - ignoring
Font directory '/usr/X11R6/lib/X11/fonts/100dpi/' not found - ignoring
Fatal server error:
could not open default font 'fixed'
I just installed tightvnc with the rpm on their website. I'm currently running CentOS 5 with GNOME up and running. FreeNX works fine, but we also need to install tightvnc for our business.
When I try running it, I get this:
Quote:
[root@10 ~]# vncserver Couldn't start Xvnc; trying default font path. Please set correct fontPath in the vncserver script. Couldn't start Xvnc process.
Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb' 15/08/07 03:27:28 Xvnc version TightVNC-1.3.9 15/08/07 03:27:28 Copyright (C) 2000-2007 TightVNC Group 15/08/07 03:27:28 Copyright (C) 1999 AT&T Laboratories Cambridge 15/08/07 03:27:28 All Rights Reserved. 15/08/07 03:27:28 See http://www.tightvnc.com/ for information on TightVNC 15/08/07 03:27:28 Desktop name 'X' (10.40.233.72.static.reverse.ltdomains.com:1) 15/08/07 03:27:28 Protocol versions supported: 3.3, 3.7, 3.8, 3.7t, 3.8t 15/08/07 03:27:28 Listening for VNC connections on TCP port 5901 15/08/07 03:27:28 Listening for HTTP connections on TCP port 5801 15/08/07 03:27:28 URL http://10.40.233.72.static.reverse.ltdomains.com:5801 Font directory '/usr/X11R6/lib/X11/fonts/misc/' not found - ignoring Font directory '/usr/X11R6/lib/X11/fonts/Speedo/' not found - ignoring Font directory '/usr/X11R6/lib/X11/fonts/Type1/' not found - ignoring Font directory '/usr/X11R6/lib/X11/fonts/75dpi/' not found - ignoring Font directory '/usr/X11R6/lib/X11/fonts/100dpi/' not found - ignoring
Fatal server error: could not open default font 'fixed' Couldn't open RGB_DB '/usr/X11R6/lib/X11/rgb' 15/08/07 03:27:29 Xvnc version TightVNC-1.3.9 15/08/07 03:27:29 Copyright (C) 2000-2007 TightVNC Group 15/08/07 03:27:29 Copyright (C) 1999 AT&T Laboratories Cambridge 15/08/07 03:27:29 All Rights Reserved. 15/08/07 03:27:29 See http://www.tightvnc.com/ for information on TightVNC 15/08/07 03:27:29 Desktop name 'X' (10.40.233.72.static.reverse.ltdomains.com:1) 15/08/07 03:27:29 Protocol versions supported: 3.3, 3.7, 3.8, 3.7t, 3.8t 15/08/07 03:27:29 Listening for VNC connections on TCP port 5901 15/08/07 03:27:29 Listening for HTTP connections on TCP port 5801 15/08/07 03:27:29 URL http://10.40.233.72.static.reverse.ltdomains.com:5801 Font directory '/usr/X11R6/lib/X11/fonts/misc/' not found - ignoring Font directory '/usr/X11R6/lib/X11/fonts/Speedo/' not found - ignoring Font directory '/usr/X11R6/lib/X11/fonts/Type1/' not found - ignoring Font directory '/usr/X11R6/lib/X11/fonts/75dpi/' not found - ignoring Font directory '/usr/X11R6/lib/X11/fonts/100dpi/' not found - ignoring
Fatal server error: could not open default font 'fixed'
I have installed image::magick perl module but its not running error is :--
Can't load '/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi/auto/Image/Magick/Magick.so' for module Image::Magick: libMagickCore.so.1: cannot open shared object file: No such file or directory at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/DynaLoader.pm line 230. at flickr.pl line 55 Compilation failed in require at flickr.pl line 55. BEGIN failed--compilation aborted at flickr.pl line 55.
i've uninstalled nginx and php-fm from plesk panel.but phpmyadmin info still showing it is running on nginx 1.6 and while uploading sql file i'm getting 503 gateway error.
an inexpensive VPS host and based on reviews on this forum, went with Web Wide Hosting.
I had a smooth signup and thanks to Jon at WWH, managed to get a payment snafu with Paypal resolved smoothly.
However, I've been struggling a lot with getting most recommended steps to actually work in my VPS and I'm getting increasingly frustrated.
The latest problem I have is that trying to install Perl modules fails with a "cannot allocate memory" error. First google hits suggest increasing memory, which really isn't an option for me right now. More puzzling is the fact that both HyperVM and user_beancounters suggest I have enough headroom atleast to install perl modules!
Output from session:
cpan> install Authen::PAM CPAN: Storable loaded ok Going to read /root/.cpan/sources/authors/01mailrc.txt.gz Going to read /root/.cpan/sources/modules/02packages.details.txt.gz Database was generated on Mon, 11 Aug 2008 07:02:52 GMT HTTP::Date not available
There's a new CPAN.pm version (v1.9205) available! [Current version is v1.7602] You might want to try install Bundle::CPAN reload cpan without quitting the current session. It should be a seamless upgrade while we are running...
Going to read /root/.cpan/sources/modules/03modlist.data.gz Could not pipe[/bin/gzip --decompress --stdout /root/.cpan/sources/modules/03modlist.data.gz |]: Cannot allocate memory at /usr/lib/perl5/5.8.8/CPAN.pm line 5726.
I hired a guy to secure and setup nameserves on my dedicated box. I'm on a time crunch and have not heard from him in 24 hours, so thought I'd ask here.
How can I find out if nameservers are running on my box, and what IP they are running on?
I am trying to install Plesk 12.0 on fresh CentOS 6 (64bit). It goes as far as initialising the databases and then moans about missing files:/usr/bin/sw-engine: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory
I then install libpng $ yum install libpng.x86_64
Re-run installer and hits next error - libfreetype: /usr/bin/sw-engine: error while loading shared libraries: libfreetype.so.6: cannot open shared object file: No such file or directoryI have CentOS-base repo and Epel repo enabled.
Why are those files not being installed as dependencies by Plesk? Is this a bug ?
i can't understand command promt to install the tightvnc would you able to help me to install this please?
please i have serched all the serch engine sites i can't find it can any one explain step by step please it woul dbe a easir for me to read and install it.
I have a Server with Centos7 + Plesk 12 and in the service configuration say that the Bind service is not installed, from command line i have install named services and make a manual configuration the first domain, but when I return to the service page in plesk... the problem is the same, the Bind Service is not installed; then the problem is when i want create a new hosting i need to go to the ssh to make the DNS configuration...
I have a brand new A8i server from 1&1 that has crashed twice today and could only be rebooted through the 1&1 control panel (not Plesk). Out of the blue the server is not accessible from the Plesk CP and is not responding to pings. I have looked through the logs and do not see anything that stands out (I am not very Linux savvy). Is there somewhere specific that I can look that would tell me why it is locking up/crashing? I have only had the server about 2 weeks and am only running email on it (no websites besides webmail and Plesk CP). It is possible that there is a hardware issue, but I cannot have 1&1 check it until after hours tonight.
Server is an 8 core Intel Atom 2.6GHz with 8GB RAM.
I installed freenx and the client on the server, then downloaded the client on my windows pc.
The Server is running CentOs 5.0, cpanel 11, and I also had GNOME installed.
The problem is, I don't think GNOME is setup, or running.
When Connecting I get this:
Quote:
"NX> 203 NXSSH running with pid: 5812 NX> 285 Enabling check on switch command NX> 285 Enabling skip of SSH config files NX> 285 Setting the preferred NX options NX> 200 Connected to address: 72.223.50.10 on port: 22 NX> 202 Authenticating user: nx NX> 208 Using auth method: publickey HELLO NXSERVER - Version 1.5.0-60 OS (GPL) NX> 105 hello NXCLIENT - Version 1.5.0 NX> 134 Accepted protocol: 1.5.0 NX> 105 SET SHELL_MODE SHELL NX> 105 SET AUTH_MODE PASSWORD NX> 105 login NX> 101 User: crewxp NX> 102 Password: NX> 103 Welcome to: 10.40.213.72.static.reverse.ltdomains.com user: crewxp NX> 105 listsession --user="crewxp" --status="suspended,running" --geometry="3840x2400x32+render+fullscreen" --type="unix-gnome" NX> 127 Sessions list of user 'crewxp' for reconnect:
Display Type Session ID Options Depth Screen Status Session Name ------- ---------------- -------------------------------- -------- ----- -------------- ----------- ------------------------------
NX> 148 Server capacity: not reached for user: crewxp NX> 105 startsession --link="adsl" --backingstore="1" --cache="16M" --images="64M" --media="0" --session="CrewXp.com" --type="unix-gnome" --geometry="3840x2400" --fullscreen="1" --kbtype="pc102/en_US" --screeninfo="3840x2400x32+render+fullscreen"
NX> 1000 NXNODE - Version 1.5.0-60 OS (GPL) NX> 700 Session id: 10.40.213.72.static.reverse.ltdomains.com-1000-ABB92BE2A15206F134F0AB649A63DF70 NX> 705 Session display: 1000 NX> 703 Session type: unix-gnome NX> 701 Proxy cookie: 3d231db82ebaad182c25969704ceaf15 NX> 702 Proxy IP: 70.241.9.129 NX> 706 Agent cookie: 3d231db82ebaad182c25969704ceaf15 NX> 704 Session cache: unix-gnome NX> 707 SSL tunneling: 0 NX> 1009 Session status: starting NX> 710 Session status: running NX> 1002 Commit NX> 105 /usr/bin/nxserver: line 1190: 31685 Terminated sleep $AGENT_STARTUP_TIMEOUT NX> 1006 Session status: running NX> 596 Session startup failed. NX> 1004 Error: NX Agent exited with exit status 1. Can't open /var/lib/nxserver/db/running/sessionId{ABB92BE2A15206F134F0AB649A63DF70}: No such file or directory. mv: cannot stat `/var/lib/nxserver/db/running/sessionId{ABB92BE2A15206F134F0AB649A63DF70}': No such file or directory NX> 1006 Session status: closed NX> 1001 Bye. Killed by signal 15 "
I'm not sure why this is happening, but i think its because gnome isn't configured or something. I just had the server installed, and asked for gnome to be installed.
I've searched for an answer for a week, but no one's came up with anything. I can't start my new server to run my business on without this.
I installed imagemagick on my server and I'm trying to write text to an image. However, I dont think i have any fonts installed on my server because I've checked my code and it appears right but theres no text. (The same code worked on an old server)
How would I go about installing fonts on my Cent OS server and what types of fonts work? (I have root access).
yum -y groupinstall kde Loading "priorities" plugin Setting up Group Process Setting up repositories Cannot find a valid baseurl for repo: update Error: Cannot find a valid baseurl for repo: update
what is this? what ever i try to install i get this weird error..
Gathering header information file(s) from server(s) Server: CentOS-3 - Addons retrygrab() failed for: http://mirror.centos.org/centos/3/ad...rs/header.info Executing failover method failover: out of servers to try Error getting file http://mirror.centos.org/centos/3/ad...rs/header.info [Errno 4] IOError: <urlopen error >
when I run /etc/easyapache it too fails
Quote:
root@server1 [~]# /scripts/easyapache Testing connection speed...(this could take a while)............Done Ping:32.076 Testing connection speed to 69.90.250.35 using pureperl...(120500.00 bytes/s)...Done Ping:32.179 Testing connection speed to 69.90.250.34 using pureperl...(120500.00 bytes/s)...Done Ping:49.545 Testing connection speed to 69.72.164.152 using pureperl...(76681.82 bytes/s)...Done Ping:49.605 Testing connection speed to 69.72.164.155 using pureperl...(70291.67 bytes/s)...Done Ping:51.603 Testing connection speed to 198.66.92.147 using pureperl...(76681.82 bytes/s)...Done 5 usable mirrors located Fetching http://layer1.cpanel.net/buildapache.sea (0)....@69.90.250.35......connected......receiving...1%...2%...3%...4%...5%...6%...7%...8%...9%...10%...11%...13%...14%...15%...16%...17%...18%...19%. ..20%...21%...22%...23%...25%...26%...27%...28%...29%...30%...31%...32%...33%...34%...35%...36%...38%...39%...40%...41%...42%...43%...44%...45%...46%. ..47%...48%...50%...51%...52%...53%...54%...55%...56%...57%...58%...59%...60%...62%...63%...64%...65%...66%...67%...68%...69%...70%...71%...72%...73%. ..75%...76%...77%...78%...79%...80%...81%...82%...83%...84%...85%...87%...88%...89%...90%...91%...92%...93%...94%...95%...96%...97%...98%...100%...... Done Creating directory buildapache Verifying archive integrity... All good. Uncompressing buildapache........................................................................................................................................... ...................................................................................................................................................... ...................................................................................................................................................... ................................................................. Checking Update System........Your operating system's rpm update method (yum) was not able to locate the glibc package. This is an indication of an improper setup. You must correct this error before you can proceed. Please correct the conflicts and try again! initfpsuexec: using apache 1.x support Waiting for httpd to restart..............finished.
how can i do a search for all files (probs using regex) of files consisting purely of numbers?
for e.g. find:
53243.php 24353.php 24098.php
(always have 5 numbers).
seems one of my accounts has had some script run which generated a bunch of these in various subfolders, and the php file basically does a callback to www3.rssnews.ws and www3.xmldata.info, which seem to be some sort of spyware servers.
