after putting up a very simple email program and having it email me a set of text, it looks like it is not a software problem, but something to do with the IIS email server. Has any one ran into this?
View 1 RepliesI own my domain [url] and have a reseller plan on a shared host [url]I have the DNS on godaddy pointed to the nameservers of reyox and on the Cpanel of my domain at reyox I have a forwarding account [url]set to forward to my gmail account.
To the best of my knowledge this has worked flawlessly for years but recently I have been starting to not receive emails from people. I found out when I wasn't getting replies I had been expecting and when I inquired or called the people instead they told me that hey replied... it's been happening over and over again lately.
When I asked my host last week they replied: "We did clear up some mail issues last night, some issues with the queue processing."
However after that it kept happening and now I am at a loss.
I don't know what's wrong nor how to troubleshoot it... It happened with people that are on all sorts of domains (gmail, aol, personal domains etc) and it happens sporadically...
It's really frustrating because I don't know what else I am not getting considering that every other day I find out about an expected email I didn't get.
The werid thing is that none of the senders whose emails got lost reported that they received a bounce issue...
how I can address this in terms of troubleshooting it and finding a solution?
Is there some sort of email monitoring services like there are site uptime monitoring services?
I have been getting ddossed for the last month, my host has tried many things on my server that are commonly suggested around here, however we have over 40 000 connections hitting the server from this attack and it keeps rising.
I am on LiteSpeed.
I also have NetScreen 50 firewall which helped for a little while, however the server still keeps going down.
I am spending $420 a month on my hosting for my dedicated server
Now it is costing me an extra $400 a month to have Netscreen firewall running which is a waste of money as it can not effectively keep the server running and i'm not sure if I can even effectively afford that much money a month, however I might need to spend a little more if need to just get the server running finally.
basically I need some options as to what I can do. I would like to stay with my host, they have been good to me, however if my options are better suited to changing then let me know. I just really need to get my server running great asap and to keep it running great when i'm away from the internet.
I'm testing on Windows 7 x64 SP1.
I have downloaded httpd-2.4.9-win32.zip from VC10 Win32 link which includes IPv6 Crypto apr-1.5.0 apr-util-1.5.3 apr-iconv-1.2.1 openssl-1.0.1h zlib-1.2.8 pcre-8.34 libxml2-2.9.1 lua-5.1.5 expat-2.1.0.
I unzipped and installed on my system. Configured SSL. I installed in directory C:Apache24
Is it normal for a ton of packets to be dropped? My server goes so slow after it gets a bunch of connections, even if I kill everything (i have to restart), and I can't figure out what the problem is. on my other servers it says no packets were dropped. how can i fix this?
ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:1C:C0:C1:8B:3E
inet addr:xx.xx.xx.xx Bcast:xx.xx.xx.255 Mask:255.255.255.0
inet6 addr: fe80::21c:c0ff:fec1:8b3e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:56435 errors:0 dropped:3049109175 overruns:0 frame:0
TX packets:87780 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6804084 (6.4 MiB) TX bytes:118424651 (112.9 MiB)
Interrupt:50 Base address:0xa000
I just wanted to check with you all to see if you have experienced an issue with cpanel that drops the www when you access directories and if so, how did you go about fixing it.
For example - if I were to go to - www.domain.com and then access a sub like /test - it would show up as domain.com/test - dropping the www.
i noticed that Intel is shipping new CPUs at such a fast rate that prices are dropping like stone... or am i wrong?
what do you think is the percentage points by which the prices of CPUs are dropping?
I currently have my own dedicated server located with the following prefs;
Linux: CentOS 4.6 (final)
Kernel Version: 2.6.9-67.0.15.ELsmp
I know this is possible, but I am seeking how to drop empty udp packets automatically with iptables.
ip_conntrack: table full, dropping packet
What does that error mean? It's related to iptables right? When I do this cat /proc/sys/net/ipv4/ip_conntrack_max, I get
65536
I increased it
131072
Because someone recommended me this number because I have 4gb of RAM. But I still get the table full errors or
host kernel: printk: 500 messages suppressed
What should I do? Should I keep increasing the number? How do I know how much I can increase it by?
I have 2 identical boxes with FC6 and the same settings and almost the same amount of traffic.
Kernel is 2.6.20-1.2925.fc6 SMP
One is running without problem. The other become slow after few days and from errors I get this message:
nf_conntrack: table full, dropping packet
The table do not clean up automatically as reboot solve the problem. How to flush nt_conntrack table without reboot?
The limit is 65536, setting it double seems to solve the problem but I'm not sure it is the way to go.
I currently have a domain on Server 1 (Linux, Apache, Ubuntu, Matrix control panel).
This server does not have any spam filter, so I have moved all the email accounts to Server 2 (Linux, Apache, Fedora Core, Plesk) which does have a brilliant spam filter; and have changed the DNS record for mail.domain.com to the IP address for Server 2.
Emails are being successfully received on Server 2.
On Server 1, when an email is sent through SMTP to an address at that domain, it does not send it to Server 2, it gets delivered to the hosting account for the domain on Server 1. So what I am guessing is happening is that Server 1 detects the domain has an account on the server, and instead of looking up the DNS info for that domain, just assumes it is on Server 1.
What I need to do, is force Server 1 to send email for that domain to Server 2. Is this possible, and if so, how can it be achieved? If more info about the server is required for a solution please let me know and I'll provide what I can.
Someone reported invalid arabic characters in webmail (squirremail precisely)
How can I correct this on a cpanel box?
I'm seeing weird characters on my support home page:
That's found right below "Home > Support"
The source code shows the following...
Quote:
<tr>
<td style="padding:0px"><p>Welcome to our Support Area.</p>
I've checked the two template files (header.tpl and homepage.tpl) but did not find such characters. Its boggling me. Not even whitespace.
I have an oddball problem here that I haven't seen.
When you visit domain.com, characters are displayed like the files are not being properly read. However, when you visit domain.com/index.php all works fine. I thought this would be an .htaccess issue and tried simply removing it, but this doesn't fix the issue. I checked httpd.conf and all looks fine there too.
I keep getting weird characters such as .... in MySQL.
View 3 Replies View RelatedRecently we have moved our Invision Power board (version 2.3.3) from InvisionPower hosting to a dedicated server. On our new server we have:
Apache 2.2.6
PHP 5.2.4
MySQL 5.0.24
Things seem to be about 95% OK, however, there are occasional problems with posting: several members tried to post Hungarian and French characters, like
Á Í Ő Ö Ő Ű
à â ç é è ê ë î ï ô û ù ü ÿ
These are not getting through, and they get an error:
Bad Request
Your browser sent a request that this server could not understand.
Apache/2.2.0 (Fedora) Server at Port 80
Members have been asked to try with Explorer, Firefox and Opera, and all get the same results. This is strange, as most Croatian and Serbian characters that are accentuated, like:
č, š, ć, ž
These go through just fine, as well as Cyrillic alphabet is OK as well.
Additionaly, one member reported a problem that 3-4 times he got an error while posting (but is usually OK to post), and he writes in Serbian Cyrillic - which seems to be usually fine, but there is an odd problem and error message:
Method Not Implemented
POST to /forums/index.php not supported.
Apache/2.2.0 (Fedora) Server at Port 80
We asked Invision Power Board tech support, however they say that the errors are on the server end in the Apache configuration, and not IPB. Which seems logical, as before the move on the new server (I don't think the old server used to run Apache), nothing like this used to happen.
after i move this accounts from old server to new server it shows me confused characters . ...
View 12 Replies View RelatedI have a cpanel 11 server with php 4.4.6 installed. my site use php scripts and one day even if the file was not edited, not touched at all , i get errors like
Parse error: syntax error, unexpected ']' in /home/xxx/public_html/wp-includes/post.php on line 37
I checked and could find a lot of illeagal characters in my php file. See below. for post_status , it became post_statuó and edit_date became edit_date<8d>. If you read through the code, you can see a lot of illegal characters. This is why i get parse errors. I had to replace the file from backup and the issue fixed. But this problem continues to occur for more files and i can't find a reason for this. Again I am the only one with access, I use BBedit to edit php files when needed in Mac OS X, and beleive I know what is being edited and again, those file which gets errors does not need to be edited for nothing, not even to modify wordpress.
======================================================
iN ( 'draft' == $post['post_statuó'] && empty($postarr['edit_date<8d>]) && empty($postarr['post_date¯]) &&
('0000-00-00 00:00:00' == $post['post_date']) )
$clçar_date = true;
else
$clear_nate = false;
// Merge old and"new fields with new fields overÃriting old ones.
$postarr = arRay_merge($post, $postarr);
$poytarr['post_category'] = $post_cáts;
if ( $clear_date ) {
$poótarr['post_date'] = '';
$postërr['post_date_gmt'] = '';
}
éf ($postarr['post_type'] == 'at|achment')
return wp_insert_atÃachment($postarr);
======================================================
I'm having a problem that I've never run across before, and was wondering if anyone might have any ideas as to what may be causing this.
Basically, on 3 of 5 new servers on a brand new private rack from The Planet, we're having what we've narrowed down to be a problem with PHP or Apache. Loading any sort of PHP page with a larger output (even such as a simple 'phpinfo' call) results in, depending on the computer or browser in use:
- The page loading for a split second then reverting to a DNS Server Not Found page (observed in IE)
- The page loading, but filling the source code with vast amounts of extra blank spaces, making a simple phpinfo call download 5+mb of HTML (observed in both IE and Firefox)
- The page loading part way, then hanging (observed in Firefox)
- Occasionally the page will reload over and over again all by itself until it ultimately goes to a DNS error page (observed in IE)
Pages not including PHP, including very long .HTML and .SHTML pages, load just fine.
Here's a link to a page calling a simple phpinfo string, and nothing else (as this is my first post, I can't link directly to URLs, sorry):
I'm trying to retrieve some files from another hard disk and I get weird characters.. Exemple:
("location:index.php"); becomes ("lOcation:aNdex.php");
I have an [URL] ....
I use htaccess to rewrite it to: [URL] ...
and there is a problem, because I do not get what I need. The result is: [URL] .....
The last / sing dous not even matter, because if I write the url without the ending /, the three dots are still removed.
It looks like everywhere in the url the (in regexp) .+/ pattern is replaced with a simple / sign.
The RewriteRule is very simple, I can not imagine it has anything to do with this, but it looks this:
RewriteRule ^(.*)$ index.php?p=$1 [QSA]
I started to log the rewrite and it looks like if the specific parts of the url are replaced before the rewrite got it.
These are the first few rows of the rewrite log:
add path info postfix: E:/web/service/szerz....odes -> E:/web/service/szerz....odes/action/axgetszerzodesar/ugyfelid/46402/termekid/46032/szerzodesszam/2012.01.01/
strip per-dir prefix: E:/web/service/szerz....odes/action/axgetszerzodesar/ugyfelid/46402/termekid/46032/szerzodesszam/2012.01.01/ -> szerz....odes/action/axgetszerzodesar/ugyfelid/46402/termekid/46032/szerzodesszam/2012.01.01/
applying pattern '^(.*)$' to uri 'szerz....odes/action/axgetszerzodesar/ugyfelid/46402/termekid/46032/szerzodesszam/2012.01.01/'
webserver: Apache/2.2.22 (Win32) PHP/5.2.17
and Apache/2.2.9 (Win32) PHP/5.2.17 (I refreshed it today because of this problem)
os: win7 home premium sp1
It is tested on a linux os too, but there were no such problems.
I am unable to create a user in mysql with 20 characters length. I am getting the annoying error message about 16 characters limitation about a username length. I have tried to increase the character user limit length to 32 characters using the following commands:
mysql -uroot -p
use mysql;
alter table `user` modify `User` CHAR(32);
FLUSH PRIVILEGES;
quit
service mysqld restart
But after all of this was done I was and I am still unable to connect to mysql anymore with/without password.
I have two quick questions.
Question 1
I had a script create a backup of every file on my site using the following format "filename.php.bac". I want to delete these files now and I tired to use "rm *.bac" but that only deleted the files in the current directory. How can I delete ALL those files in EVERY directory and sub-directory starting at the public_html directory?
Question 2
How can I escape semi-colon's (;) in a perl script? I'm trying to run a search+replace script to update some Analytics code and I have a ton of files to update but for some reason if there is a semi-colon in the find varable, it assumes that it has reached the end of the contents in that variable.
Here is the code. Take a look at the $find variable and you will see extra semi-colon's. How do I tell the script to not treat those semi-colons as the end of the variable? .........
is it possible to configure so, that it would be possible to receive only in Latin and Cyrillica written mails? No Chinese, Japanese, etc. characters, I mean.
View 0 Replies View RelatedI want to redirect all the URLs starting from specific characters.
For instance:
www.example.com/abc-apple
www.example.com/abc-bat.html
www.example.com/abc-cat.php
All of the URLs above starts with "abc-" I want a redirect code to redirect all URLs starting from "abc-" to a single URL i.e. www.example.com/allÂ
We have many intranet document what linked on our intranet site. We use "apache builed in" directory listing to handle documents on browser, and make accessable to users. Because this not so user friendly we try to use a template (h5ai-[URL] ....) for mod_autoindex.
Unfortunatelly if file or folder name contains special characters (like é,á,ű,ő,ú,ü,ö,ó) than get Access Forbidden - Error 403. If change the folder name, than its ok.
I use xampp. how to solve this.
I've migrated from Apache 2.2 to Apache 2.4 few days ago. It is installed as a service on my Windows 7 developer machine and works in bundle with PHP 5.6.2.
Today I've discovered that GET parameters with Cyrillic characters in URL string are empty.
For example URL looks like this: site.com/search.php?q=%C8%E2%E0%ED%EE%E2
URL-encoded string here is Иванов (%C8%E2%E0%ED%EE%E2)
When I try to use this GET parameter in my PHP script - the variable $_GET['q'] is empty. If I put latin characters in this parameter - $_GET['q'] is taking the corresponding value.
Doesn't look like it's a problem of PHP as I think. Otherwise at least something should stay in the variable. And also I would like to add that this was working absolutely normal on Apache 2.2.