I just wanted to check with you all to see if you have experienced an issue with cpanel that drops the www when you access directories and if so, how did you go about fixing it.
For example - if I were to go to - www.domain.com and then access a sub like /test - it would show up as domain.com/test - dropping the www.
Is it normal for a ton of packets to be dropped? My server goes so slow after it gets a bunch of connections, even if I kill everything (i have to restart), and I can't figure out what the problem is. on my other servers it says no packets were dropped. how can i fix this?
ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:1C:C0:C1:8B:3E
inet addr:xx.xx.xx.xx Bcast:xx.xx.xx.255 Mask:255.255.255.0
inet6 addr: fe80::21c:c0ff:fec1:8b3e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:56435 errors:0 dropped:3049109175 overruns:0 frame:0
TX packets:87780 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6804084 (6.4 MiB) TX bytes:118424651 (112.9 MiB)
Interrupt:50 Base address:0xa000
i noticed that Intel is shipping new CPUs at such a fast rate that prices are dropping like stone... or am i wrong?
what do you think is the percentage points by which the prices of CPUs are dropping?
I currently have my own dedicated server located with the following prefs;
Linux: CentOS 4.6 (final)
Kernel Version: 2.6.9-67.0.15.ELsmp
I know this is possible, but I am seeking how to drop empty udp packets automatically with iptables.
I have been getting ddossed for the last month, my host has tried many things on my server that are commonly suggested around here, however we have over 40 000 connections hitting the server from this attack and it keeps rising.
I am on LiteSpeed.
I also have NetScreen 50 firewall which helped for a little while, however the server still keeps going down.
I am spending $420 a month on my hosting for my dedicated server
Now it is costing me an extra $400 a month to have Netscreen firewall running which is a waste of money as it can not effectively keep the server running and i'm not sure if I can even effectively afford that much money a month, however I might need to spend a little more if need to just get the server running finally.
basically I need some options as to what I can do. I would like to stay with my host, they have been good to me, however if my options are better suited to changing then let me know. I just really need to get my server running great asap and to keep it running great when i'm away from the internet.
after putting up a very simple email program and having it email me a set of text, it looks like it is not a software problem, but something to do with the IIS email server. Has any one ran into this?
View 1 Replies View Relatedip_conntrack: table full, dropping packet
What does that error mean? It's related to iptables right? When I do this cat /proc/sys/net/ipv4/ip_conntrack_max, I get
65536
I increased it
131072
Because someone recommended me this number because I have 4gb of RAM. But I still get the table full errors or
host kernel: printk: 500 messages suppressed
What should I do? Should I keep increasing the number? How do I know how much I can increase it by?
I have 2 identical boxes with FC6 and the same settings and almost the same amount of traffic.
Kernel is 2.6.20-1.2925.fc6 SMP
One is running without problem. The other become slow after few days and from errors I get this message:
nf_conntrack: table full, dropping packet
The table do not clean up automatically as reboot solve the problem. How to flush nt_conntrack table without reboot?
The limit is 65536, setting it double seems to solve the problem but I'm not sure it is the way to go.
I own my domain [url] and have a reseller plan on a shared host [url]I have the DNS on godaddy pointed to the nameservers of reyox and on the Cpanel of my domain at reyox I have a forwarding account [url]set to forward to my gmail account.
To the best of my knowledge this has worked flawlessly for years but recently I have been starting to not receive emails from people. I found out when I wasn't getting replies I had been expecting and when I inquired or called the people instead they told me that hey replied... it's been happening over and over again lately.
When I asked my host last week they replied: "We did clear up some mail issues last night, some issues with the queue processing."
However after that it kept happening and now I am at a loss.
I don't know what's wrong nor how to troubleshoot it... It happened with people that are on all sorts of domains (gmail, aol, personal domains etc) and it happens sporadically...
It's really frustrating because I don't know what else I am not getting considering that every other day I find out about an expected email I didn't get.
The werid thing is that none of the senders whose emails got lost reported that they received a bounce issue...
how I can address this in terms of troubleshooting it and finding a solution?
Is there some sort of email monitoring services like there are site uptime monitoring services?
got error with cpanel linces after force reboot
and when i try to set the licnse
i got this error
Code:
/usr/local/cpanel/cpkeyclt
Updating Internal cPanel Information.......Died at /usr/local/cpanel/Cpanel/CpKeyClt.pm line 132.
...propagated at /usr/local/cpanel/Cpanel/CpKeyClt.pm line 132.
.Done
An arbitrary file inclusion vulnerability has been discovered in the Horde
webmail application. At present, we can confirm that this security
vulnerability in question affects Horde 3.1.6 and earlier. Based on
incomplete information at this time, we also believe this affects Horde
Groupware 1.0.4 and earlier as well (cPanel does not use Horde Groupware
at this time).
cPanel customers should update their cPanel and WHM servers immediately to
prevent any chance of compromise. The patch will be available in builds
11.18.2 and greater (or 11.19.2 and greater for EDGE systems). The updated
builds will be available immediately to all fast update servers. The
builds will be available to all other update servers within one hour of
this posting.
To check which version of cPanel and WHM is on your server, simply log
into WebHost Manager (WHM) and look in the top right corner, or execute
the following command from the command line as root:
/usr/local/cpanel/cpanel -V
You can upgrade your server by navigating to 'cPanel' -> 'Upgrade to
Latest Version' in WebHost Manager or by executing the following from the
command line as root:
/scripts/upcp
It is recommended that all use of Horde 3.1.6 and earlier be stopped (on
cPanel and non-cPanel systems alike) until Horde updates can be applied.
You can disable Horde on your cPanel system by unchecking the box next to
'Server Configuration' -> 'Tweak Settings' -> 'Mail' -> 'Horde Webmail'
within WHM, and saving the page with the new settings.
I have 2 servers both have cpanel. I want to use 2nd server's mysql in my site which is on 1st server. I think thats not that hard. I don't wanna do clustering as this is temproary.
View 2 Replies View RelatedI am in the process of moving websites and emails to a new host. I am doing the transfer manually because we are gradually moving different part of the site at one time to allow developers to work on new parts.
I now want to migrate all of the email accounts off the old cpanel server to the new cpanel host. What files and settings do I need to move so settings are not lost, such as save mail and contacts?
I'm having big trouble trying to update an SSL certificate with cPanel.
I'm such a dummy that I've ended up buying 2 SSL certificates to see if that may fix it.
I now have 1 certificate for www.mydomainname.com and 1 for just mydomainname.com
I have logged into the account in cpanel and uploaded both certificates and when I view them in Security -> SSL/TLS manager -> Certificates They both display the correct host, correct issuer, and correct expire date.
But when I try to visit my site using https I get:
The certificate expired on 4/8/2008 7:59 PM.
(Error code: sec_error_unknown_issuer)
can anybody make me offers on a vps or rps with cpanel and whm?
View 4 Replies View RelatedI had a website created a few years ago. I am trying to update that website now. As ROOT, when I log into CPanel via WHM, I am unable to see a File Manager.
What would be my next steps?
Anyone here use PAX in their kernel builds? I've been trying to find a setup that works, but with no luck. stability wise.
I can run CPanel fine with just about any PAX setup, but after awhile with some settings the server eventually will get a load of over 250 and 1000 processes like it's not able to terminate them, or turn 4GB ram into like 3.2GB ram.
has anyone managed to setup cPanel /WHM with 1:1 NAT? I tried cPanel support with no luck, but I have 1:1 setup on all my IP address with no luck!
View 2 Replies View RelatedOkay does any one here know how to install svn with cpanel as all the ones i found in google it install svn but to anther apache in a diff folder like /etc/httpd/conf and not in /usr/local/apache/conf
using centos5 and installing using the yum command (i would like to use it from the site but do not know how to compile a install)
getting a VPS with either 384mb or 512mb and I would like to know what control panel uses the least amount of ram I have a choice of either cPanel or DA
View 12 Replies View RelatedI have a reseller account with site5. The last months the service has been horrible, sites down, dns down etc.. and the people there dont do a thing..
so i want to change to something else. I assume that VPS+whm+cpanel will give me something similar.
Which vps hosts are good? and which packages can you offer me? I'm paying about 19 usd a month now.
i am now unable to remove subdomains for some reason, even though it says that it is successful.
i added 2 parked domains that is to redirect to my main domain and it created the subdomain folders for me.
i went to try creating a subdomain for parked.co.cc and tried to redirect it to my main domain.
so example i created this subdomain: parked1.co.cc.maindomain.com
in the list of subdomains table, i have:
Subdomains: parked1
Root Domain: .co.cc.maindomain.com
but however it should be:
Subdomains: parked1.co.cc
Root Domain: .maindomain.com
how can i solve this? i just want to delete it now..
also for some reason my /cpanel and /webmail goes to my main hosting website url but not mine! so if i type www.maindomain.com/cpanel it goes to www.mainhosting.com:2093 etc!
Where do you guys currently get your external vps cpanel licenses? Cheapest ive been able to find is $15
Also what type of resources does cpanel require to run in the vps as far as ram used, etc..
My provider can provide me with cpanel vps so i have to get it externally, but 15 per is a bit much i think.
I now have tried a number of VPS accounts with CPanel.
I have taken the 256mb burstable to 512mb.
I am only running a simple php mysql online game (AATraders.com), yet i always max out at the memory and the server crashes.
Even when there is no one online I have issues.
I get the feeling that VPS with Cpanel and anything less than 1 gb ram is not going to work.
i can access all my domains and sites but i cant get to cpanel or whm.
View 4 Replies View RelatedI was moving some clients over from another server of mine (their accounts are ~10/15gb)
Typically I can use WHM to restore them; however, it seems as if there are problems restoring them with the new WHM because its so big.
I’ve been reading several posts about cpanel vs. directadmin and the difference in RAM usage.
I understand that cpanel is a resource hog that uses more RAM... so here is my noob question...
How and when does this have an impact on my site visitors?
Meaning...
1. Does this ONLY have an impact on ME while I’m using the control panel? Or..
2. Does this impact my visitors ONLY if I’m running/using my control panel at that moment? Or...
3? Does this have an impact on my visitors all the time regardless of my control panel usage at the moment?
I noticed there are a lot of different web tools in my cpanel. I want to add a feature to my Free Music Videos website so that visitors can post comments about the videos.
Is there a cpanel utility that will allow me to easily implement this type of functionality right on each video's page?
major problem ive discovered about 5 minutes ago but i need help ASAP on resolving this issue
here is the output of a service restart;
Attempting to restart httpd [url]
Waiting for httpd to restart.... . . . . . . . . . . finished.
httpd status root 16347 2.3 2.8 23744 22076 ? S 01:31 0:00 /usr/local/cpanel/whostmgr/bin/whostmgr ./reshttpd
httpd has failed, please contact the sysadmin.
_________________________________________________________
Ok know its something to do with bytelog or something but it happens everytime i add a account, i can still access WHM and Shell
Who ever can resolve this issue, There is a REWARD of a FREE resellers account
we have a FreeBSD box with cPanel. I have a second HDD for backup with full daily backup of our accounts.
After Server reload, I can not recreate accounts (reinstalled FreeBSD and cPanel again) -simple I can not get users list. Backup data are still there.
We need cPanel expert who can help us to avoid facing angree customers.
Please send me your price per hour ASAP (cc paying method only).